23Q1072 Approved Solicitation.pdf

SEE ADDENDUM

(No Collect Calls)

M6700123Q1072 08-Aug-2023

b. TELEPHONE NUMBER

910-451-6357

8. OFFER DUE DATE/LOCAL TIME

12:00 PM 07 Sep 2023

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA X ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

M670019. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

TAMMILA M. CASSELL

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.X

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

MMP1003267323

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED ORX

SMALL BUSINESS

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

M67001MARINE CORPS FIELD CONTRACTING SYS

ATTN : TAMMILA M. CASSELL

PO BOX 8368

CAMP LEJEUNE NC 28547

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

CODE15. DELIVER TO CODE MMP100 16. ADMINISTERED BY

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

X SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

MMP100

KELLY ROOT

1 HOLCOMB BLVD

CAMP LEJEUNE NC 28546

TEL: 910-238-6476 FAX:

910-451-7845FAX:

TEL: 910-451-6357

SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

SIZE STANDARD:

1,000

NAICS:

337211

X

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

PAGE 2 OF148

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

M6700123Q1072

Section SF 1449 - CONTINUATION SHEET

NOTICE TO OFFERORS:

NOTICE TO OFFERORS:

SUBMISSION OF QUOTES: Quotes may be submitted via email (no larger than 2MB) to

Tammila.cassell@usmc.mil; (PREFERRED METHOD) or via hand delivery/courier to Contracting

Department, Bldg. 316, Holcomb Blvd, Camp Lejeune, NC 28542. It is solely the Offeror’s responsibility to ensure quotes are submitted in accordance with FAR provision 52.212-1 including its addenda, and received within the required timeframe. All quotes, if timely received, will be considered for award. The information submitted shall be clear and legible.

All questions shall be submitted no later than 18 August 2023. Questions shall be sent to

Tammila.cassell@usmc.mil.

Attachments with posted solicitation:

1) SF1449

2) Drapery Intent

3) Case goods Specifications

4) Picture of each line item with quantity

5) Justification and Authorization

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 72 Each

MONITOR ARM

FFP

Brand Name or Equal: MONITOR ARM

-Manufacturer: Ergotron; Part number: 45-245-224

-Monitor arm must accommodate 27-32" monitors.

-Single arm must accommodate single and/or dual monitors based on individual user needs.

-Arm must include cable management as well as surface and grommet mount options.

-It must provide a minimum 13" height adjustment, 75-degree tilt, 360 degrees pan capability, and 360-degree rotation for positioning monitors in landscape or portrait orientation.

-Must also be compatible with most models of existing desktop risers.

-Preferred mounting option (surface-attached or clamp).

-Color: Black

FOB: Origin (Shipping Point)

MILSTRIP: MMP1003267323

PURCHASE REQUEST NUMBER: MMP1003267323

PSC CD: 7110

NET AMT

mailto:Tammila.cassell@usmc.mil

0002 1 Each WHITEBOARD, small

FFP

-Brand Name or Equal: WHITEBOARD – PORCELAIN

-Manufacturer: Claridge; Part number: C-FPM12-0304-Z

-Dimensions: 34-38 inches High x 46 -50 inches Wide

-Dry erase whiteboard must have a projection friendly, porcelain writing surface that will not ghost or stain.

-It must have concealed fasteners and accept magnetic accessories.

-It must be GREENGUARD or equal certified, eco-friendly and emit no VOCs.

-Must include magnetic accessory tray(s), 4 color LCS dry erase markers, and earth magnets.

-Hanging and mounting hardware must be included.

-Warranty shall be provided.

FOB: Origin (Shipping Point)

MILSTRIP: MMP1003267323

0003 24 Each WHITEBOARD, medium

FFP

-Brand Name or Equal: WHITEBOARD – PORCELAIN

-Manufacturer: Claridge; Part number: C-FPM12-0305-Z

-Dimensions: 34-38 inches High x 58-62 inches Wide

-Dry erase whiteboard must have a projection friendly, porcelain writing surface that will not ghost or stain.

-It must have concealed fasteners and accept magnetic accessories.

-It must be GREENGUARD or equal certified, eco-friendly and emit no VOCs.

-Must include magnetic accessory tray(s), 4 color LCS dry erase markers, and earth magnets.

-Hanging and mounting hardware must be included.

-Warranty shall be provided.

FOB: Origin (Shipping Point)

MILSTRIP: MMP1003267323

0004 1 Each WHITEBOARD, large

FFP

-Brand Name or Equal: WHITEBOARD – PORCELAIN

-Manufacturer: Claridge; Part number: C-FPM12-0405-Z

-Dimensions: 46-50 inches High x 58-62 inches Wide

-Dry erase whiteboard must have a projection friendly, porcelain writing surface that will not ghost or stain.

-It must have concealed fasteners and accept magnetic accessories.

-It must be GREENGUARD or equal certified, eco-friendly and emit no VOCs.

-Must include magnetic accessory tray(s), 4 color LCS dry erase markers, and earth magnets.

-Hanging and mounting hardware must be included.

-Warranty shall be provided.

FOB: Origin (Shipping Point)

MILSTRIP: MMP1003267323

0005 77 Each

WALL CLOCK

FFP

-Brand Name or Equal: WALL CLOCK

-Manufacturer: Chicago Lighthouse; Part number: CL-67808003

-Clock must be a round 12-16 inches diameter.

-Analog type with 24-hour quartz movement.

-Color: Black.

-Clock face must have crisp, black graphics with hours 1 through 12, minute markers and a non-yellowing white background.

-Clock face shall have a shatter proof lens acrylic face cover.

-Clock must have a quartz battery with a second hand.

-Hanging and mounting hardware must be included.

FOB: Origin (Shipping Point)

MILSTRIP: MMP1003267323

0006 89 Each WASTE BIN, small

FFP

-Brand Name or Equal: WASTE BIN - 28-29 QUART

-Manufacturer: Alle; Part number: 8128BK

-Capacity must be 28-29 quarts.

-Waste Container must fit under standard desk height.

-Bin must have soft molded all-plastic construction which will not chip, rust, or dent. It must have a rolled rim for added strength and ease of cleaning.

-Color: Black

FOB: Origin (Shipping Point)

MILSTRIP: MMP1003267323

0007 2 Each WASTE BIN, large

FFP

-Brand Name or Equal: WASTE BIN - 41-42 QUART

-Manufacturer: Alle; Part number: 8188BK

-Capacity must be 41-42 quarts.

-Bin must have soft molded all-plastic construction which will not chip, rust, or dent. It must have a rolled rim for added strength and ease of cleaning.

-Color: Black

FOB: Origin (Shipping Point)

MILSTRIP: MMP1003267323

0008 89 Each RECYCLE BIN, small

FFP

-Brand Name or Equal: RECYCLE BIN 28-29 QUART

-Manufacturer: Alle; Part number: 8128BLR

-Capacity must be 28-29 quarts.

-Recycling container must fit under standard desk height.

-Bin must have soft molded all-plastic construction which will not chip, rust, or dent. It must have a rolled rim for added strength and ease of cleaning.

-It must have a white recycling logo on the side.

-Color: Blue

FOB: Origin (Shipping Point)

MILSTRIP: MMP1003267323

0009 4 Each TRASH & RECYCLING RECEPTACLES, large

FFP

-Brand Name or Equal: TRASH & RECYCLING RECEPTACLES - LARGE

-Manufacturer: Busch Systems; Part number: 100835

-Dimensions 40-44 inches Wide x 20-24 inches Depth x 28-32 inches High.

-Capacity must be 84 gallons in total.

-Dual waste and recycling container shall have three openings.

-One opening must be designated for "waste," one is designated as "bottles and cans," and the other is designated as "paper."

-Container can be constructed of composite board with high pressure plastic laminate surface or all stainless steel.

-Lid shall be stainless steel and have a durable metal hinge.

-Interior of container must have ergonomic plastic liners.

FOB: Origin (Shipping Point)

MILSTRIP: MMP1003267323

0010 2 Each DISPLAY CASE TROPHIES, custom

FFP

-Brand Name or Equal: DISPLAY CASE for TROPHIES

-Manufacturer: Gettysburg Flag; Part number: N/A -Custom

-Dimensions: Minimum dimensions: Bottom Height 34 inches, Back Height 61 1/2 inches, Front Height 43 inches are the existing trophy case measurements.

-Display case must be constructed of Grade A veneers.

-Wood type should be considered with attention to how the wood will accept stain and produce a result that shall closely match custom walnut trim finish in building lobby.

-The back or top of case must open easily and wide enough to place and remove trophies without difficulty.

-Case opening must be lockable.

-Display case should support a minimum of 75lbs.

-Shop drawing for trophy case shall be submitted and approved prior to order. The style and finish shall be in accordance to the performance work statement.

FOB: Origin (Shipping Point)

MILSTRIP: MMP1003267323

0011 1 Each DISPLAY CASE, custom

FFP

-Brand Name or Equal: DISPLAY CASE

-Manufacturer: Gettysburg Flag; Part number: N/A -Custom

-Dimensions: Case: is 20 inches Wide x 20 inches Depth x 63 inches High. The

Pedestal Base: is 18 inches Wide x 18 inches Depth x 45 inches High. Glass: is 16 inches high.

-Display case must be constructed of Grade A veneers.

-Wood type should be considered with attention to how the wood will accept stain and produce a result that must closely match custom walnut trim finish in building lobby.

-Glass top will fit securely on top of podium to ensure it cannot be easily moved.

-Image of existing case is provided for visual reference.

-Shop drawing for display case must be submitted and approved prior to order. The style and finish shall be in accordance to the performance work statement.

FOB: Origin (Shipping Point)

MILSTRIP: MMP1003267323

0012 2 Each FLAG STAND, small, custom

FFP

-Brand Name or Equal: FLAG STAND

-Manufacturer: Gettysburg Flag; Part number: N/A -Custom

-Dimensions: Each leg: of the existing flag stand is 45 inches Wide x 12 inches

Depth x 18 inches High. Step: 4-1/2 inches and Flag hole: 1 inch.

-Flag stand must be constructed of Grade A veneers.

-Wood type should be considered with attention to how the wood will accept stain and produce a result that must closely match custom walnut trim finish in building lobby.

-Image of existing flag stand is provided for visual reference.

-Each stand should be able to receive five flag poles.

-Shop drawing for flag stand must be submitted and approved prior to order. The style and finish shall be in accordance to the performance work statement.

FOB: Origin (Shipping Point)

MILSTRIP: MMP1003267323

PSC CD: V112

0013 1 Each FLAG STAND, large, custom

FFP

-Brand Name or Equal: FLAG STAND

-Manufacturer: Gettysburg Flag; Part number: N/A -Custom

-Dimensions: Each leg: of the existing flag stand is 70 inches Wide x 12 inches

Depth x 18 inches High, Step: 4-1/2 inches and Flag hole: 1 inch.

-Flag stand must be constructed of Grade A veneers.

-Wood type should be considered with attention to how the wood will accept stain and produce a result that must closely match custom walnut trim finish in building lobby.

-Image of existing flag stand is provided for visual reference.

-Stand should be able to receive seven flag poles.

-Plaques will be replaced with same existing text and placed left to right as currently displayed.

-Shop drawing for flag stand must be submitted and approved prior to order. The style and finish shall be in accordance to the performance work statement.

FOB: Origin (Shipping Point)

MILSTRIP: MMP1003267323

PSC CD: N072

0014 1 Each SIGN-IN PODIUM, custom

FFP

-Brand Name or Equal: SIGN-IN PODIUM

-Manufacturer: Gettysburg Flag; Part number: N/A -Custom

-Dimensions: Writing surface: is 22 inches Wide x 18 inches Depth. Display: 21 inches Wide x 13 inches High x 4 inches Depth. Pedestal: 18 inches Wide x 18 inches Depth x 45 inches High.

-Podium stand must be constructed of Grade A veneers.

-Wood type should be considered with attention to how the wood will accept stain and produce a result that must closely match custom walnut trim finish in building lobby.

-Image of existing podium is provided for visual reference.

-Podium must be constructed with boxes on the back.

-Display box to hold welcome letter.

-Display box to hold sign-in book.

-Shop drawing for Podium must be submitted and approved prior to order. The style and finish shall be in accordance to the performance work statement.

FOB: Origin (Shipping Point)

MILSTRIP: MMP1003267323

0015 1 Each DIRECTORY PODIUM, custom

FFP

-Brand Name or Equal: DIRECTORY PODIUM

-Manufacturer: Gettysburg Flag; Part number: N/A -Custom

-Dimensions: Directory: 27 inches Wide x 14 inches High x 3 inches Depth.

Pedestal: 18 inches Wide x 18 inches Depth x 45 inches High.

-Podium stand must be constructed of Grade A veneers.

-Wood type should be considered with attention to how the wood will accept stain and produce a result that must closely match custom walnut trim finish in building lobby.

-Image of existing podium is provided for visual reference.

-Podium must be constructed with boxes on the back.

-Display box to hold Staff Directory.

-Display box to hold Way Finding plan.

-Shop drawing for director podium must be submitted and approved prior to order.

The style and finish shall be in accordance to the performance work statement.

FOB: Origin (Shipping Point)

MILSTRIP: MMP1003267323

0016 7 Each DRAPERIES, custom

FFP

-Brand Name or Equal: DRAPERIES

-Manufacturer: Precision Wall; Part number: N/A -Custom

-Dimensions: Cornice: estimated size ~25 inches High x ~56 inches Wide x ~3 inches Depth. Faux leather accent: is ~2.5 inches Wide. Metal button: is 1 inch

Diameter. Faux leather trim: when gathered ~8 inches High.

-Design intent is a soft cornice with black out fabric backer, gathered in center with accent trim and metal buttons. White liner on back of cornice.

-Cornice will not have a wood substrate.

-Cornice will hang from a 2 ½ inch face curtain rod.

-Cornice will have a fabric return to the wall. A type of stiffener fabric may be required to give finished cornice form.

-Cornice fabric is Designtex Kabuto, Fog. Accent trim is Maharam Article, Storm.

Buttons are Eagle and Anchor Marine Corps Old Emblems Gray/Silver.

-All window dimensions must be field verified.

-Mockup must be submitted and approved prior to order.

-Work room to advise on actual finished cornice dimensions.

FOB: Origin (Shipping Point)

MILSTRIP: MMP1003267323

0017 2 Each

TWIN XL BED

FFP

-Brand Name or Equal: TWIN XL BED

-Manufacturer: Moduform; Part number: RM18-3680 & EV4UB-1D7

-Dimensions: Bed: 36-38 inches Wide x 80-84 inches Length x 24-34 inches High.

Underbed storage: 22-36 inches Depth x 28-38 inches Wide x 8-10 inches High.

-Headboard and Footboard shall be solid oak with oak veneer panel.

-Finish must closely match laminate and veneer case goods.

-Custom stain sample must be provided for owner approval prior to order.

-Must be a spring deck bed with bolt-on sinuous spring for twin XL mattress and automated clamps to ensure frames are square and joints are tight.

-Wood shall be protected to prevent discoloration, staining from food and beverage or abrasions from paper, books and writing instruments.

-Wood protectant should withstand tough harsh cleaning solvents and commercial detergents.

-Shall include minimum one drawer underbed storage unit.

FOB: Origin (Shipping Point)

MILSTRIP: MMP1003267323

0018 2 Each

TWIN XL MATTRESS

FFP

-Brand Name or Equal: TWIN XL MATTRESS

-Manufacturer: Moduform; Part number: MTF3680QT

-Width: 36 to 38 inches

-Length: 78 to 80 inches

-Provide two-sided Twin XL mattress with minimum 364 double, Bonnell innerspring coils or equal, or memory foam or equal.

-Edge support to protect the edges from premature breakdown.

-Wire border must be butt-welded at ends (support seating usage).

-All sides shall be completely enclosed with adequate padding so no sharp edges or coils can be felt through sides.

-Smooth, dark colored, outer-cover of breathable, non-toxic nylon fabric or similar.

Material shall have inverted seams to resist raveling and zippering if stitches are broken or cut.

-Mattress shall have a bonded, flame resistant and chemical-free insulation pad or fire retardant fiber on top and bottom as a fire barrier.

-Beneath the fire barrier, a minimum of 1.25 thick High Resilience (HR) polyurethane high density foam with an unfilled density of at least 1.25 pounds per cubic feet on both sides of mattress.

-Product must be fluid proof, hypoallergenic, bug resistant, antimicrobial, antistatic, crack resistant, and flame retardant. Flame retardant chemicals shall not be used to meet FR requirements. Meet CPSC 16, CFR 1632, and CFR 1633.

-Manufacturer’s warranty must be specified.

FOB: Origin (Shipping Point)

MILSTRIP: MMP1003267323

0019 6 Each TASK CHAIR, Command Center

FFP

-Brand Name or Equal: TASK CHAIR, COMMAND CENTER

-Manufacturer: Steelcase Gesture; Part number: 442A50

-Dimensions: Chair: 30-46 inches High x 20-24 inches Depth, 22-36 inches Width.

Seat: 16 inches Wide x 22 inches Depth.

-Chair must be high back and include headrest.

-Chair must have a pneumatic cylinder and include lumbar support, seat depth adjustment and tilt control.

-Cushion minimum 2 inches polyurethane foam.

-Frame and arms must be black.

-Arms must have height, depth, width, and pivot adjustments.

-Base must be brushed aluminum or silver metallic powder coat base.

-Hard casters for soft flooring applications.

-Shall be able to hold up to 400 pounds.

-Fabric must not contain PFOS and PFOA.

-Upholstered in high grade black leather.

-Cushion: Minimum 2 inches of molded polyurethane foam in both seat and back.

-Foam density is 3.8 pounds per cubic foot.

-Must meet or exceed ANSI and BIFM standards.

-Chair must have a imited lifetime warranty on frame, seat shell, and base.

-Minimum of 5-year warranty on mechanisms, headrests, and pneumatic cylinders.

FOB: Origin (Shipping Point)

MILSTRIP: MMP1003267323

0020 21 Each TASK CHAIR, Executive

FFP

-Brand Name or Equal: TASK CHAIR, EXECUTIVE

-Manufacturer: Steelcase Gesture; Part number: 442A50

-Dimensions: Chair: 30-46 inches High x 20-24 inches Depth, 22-36 inches Width.

Seat: 16 inches Wide x 22 inches Depth.

-Chair must be high back and include headrest.

-Cushion minimum 2 inches polyurethane foam.

-Arms must have height, depth, width and pivot adjustments.

-Chair must have a pneumatic cylinder and include lumbar support, seat depth adjustment and tilt control.

-Color: Black for base, frame and arms.

-Hard casters for soft flooring applications.

-Shall be able to hold up to 400 pounds.

-It must be fully upholstered in high grade black vinyl.

-Cushion: Minimum 2 inches of molded polyurethane foam in both seat and back.

-Foam density is 3.8 pounds per cubic foot.

-Fabric must not contain PFOS and PFOA.

-Chair must meet or exceed ANSI and BIFMA standards.

-Chair must have a limited lifetime warranty on frame, seat shell and base.

-Minimum 5-year warranty on mechanisms, headrests and pneumatic cylinders.

FOB: Origin (Shipping Point)

MILSTRIP: MMP1003267323

0021 52 Each TASK CHAIR, Managerial

FFP

-Brand Name or Equal: TASK CHAIR, MANAGERIAL

-Manufacturer: HM Aeron; Part number: AER1B23DWALP

-Dimensions: Chair: 34-46 inches High x 26-30 inches Depth x 26-32 inches

Width

-Task chair must have a black mesh back and seat to eliminate pressure points.

-Chair must provide lumbar/sacral support and include tilt limiter with seat angle.

-Frame and arms must be black.

-Base: five-star.

-Chair shall have hard casters for soft flooring applications.

-Arms shall have adjustments for height, angle, and depth.

-Cylinder must have a 5 inches pneumatic height adjustment.

-Shall be able to hold up to 300 pounds.

-Pellicle must not contain PFOS and PFOA.

-Chair must meet or exceed ANSI and BIFMA standards.

-Chair must have a minimum 5 year warranty, 3-shift warranty with limited exceptions.

FOB: Origin (Shipping Point)

MILSTRIP: MMP1003267323

0022 44 Each CONFERENCE CHAIR, Managerial

FFP

-Brand Name or Equal: CONFERENCE CHAIR, MANAGERIAL (At the Table)

-Manufacturer: SOI Prava; Part number: 6422T A111 C21 BO KD

-Dimensions: Chair: 42-48 inches High x 24-28 inches Depth x 24-28 inches

Width

-Chair must be mid-back.

-Fully upholstered in vinyl (minimum 100,000 double rubs) with double-stitch detailing.

-Chair seat must be fixed height at 19 inches to meet maximum height for ADA requirements.

-Chair must include swivel tilt.

-Arms must be black fixed loop.

-Minimum weight capacity must be 300 pounds.

-Base: Five-star brushed aluminum base.

-Fabric must not contain PFOS and PFOA.

-Chair must meet ANSI and BIFMA standards.

-Chair must include a lifetime limited warranty.

FOB: Origin (Shipping Point)

MILSTRIP: MMP1003267323

0023 35 Each CONFERENCE CHAIR, Managerial

FFP

-Brand Name or Equal: CONFERENCE CHAIR, MANAGERIAL (Perimeter of

Room)

-Manufacturer: SOI Prava; Part number: 6422T A111 C21 BO KD

-Dimensions: Chair: 42-48 inches High x 24-28 inches Depth x 24-28 inches

Width.

-Chair must be mid-back.

-Fully upholstered in vinyl (minimum 100,000 double rubs) with double-stitch detailing.

-Chair seat must be fixed height at 19inches to meet maximum height for ADA requirements.

-Chair must include swivel tilt.

-Arms must be black fixed loop.

-Minimum weight capacity must be 300 pounds.

-Base: Five-star brushed aluminum base.

-Fabric must not contain PFOS and PFOA.

-Chair must meet ANSI and BIFMA standards.

-Chair must include a lifetime limited warranty.

FOB: Origin (Shipping Point)

MILSTRIP: MMP1003267323

0024 67 Each CONFERENCE CHAIR, Executive & Command

FFP

-Brand Name or Equal: CONFERENCE CHAIR,EXECUTIVE & COMMAND

ROOM 172, 205

-Manufacturer: SOI Prava; Part number: 6423 Y/E3 A111 B8 C16 KD

-Dimensions: Chair: 42-48 inches High x 24-28 inches Depth x 24-28 inches

Width.

-Chair must be high-back.

-Fully upholstered in top grade leather with double-stitch detailing.

-Chair must be fixed height at 19inches to meet maximum height for ADA requirements.

-Chair must include enhanced synchro with seat depth adjustment.

-Arms must be black fixed loop.

-Minimum weight capacity must be 300 pounds.

-Base: Five-star brushed aluminum base.

-Fabric must not contain PFOS and PFOA.

-Chair must meet ANSI and BIFMA standards.

-Chair must include a lifetime limited warranty.

FOB: Origin (Shipping Point)

MILSTRIP: MMP1003267323

0025 30 Each

TRAINING CHAIR

FFP

-Brand Name or Equal: TRAINING CHAIR

-Manufacturer: SOI Movi; Part number: 1061 FT4 AR1 FC1 CS5 AC

-Dimensions: Chair: 32-36 inches High x 20-24 inches Depth x 22-24 inches

Width.

-Chair must have black mesh back and upholstered vinyl seat.

-Chair seat must flip to allow nesting up to a 4-chairs deep.

-Arms must be black fixed loop.

-Frame must be black powder coated with 4-point base.

-Hard casters for soft flooring applications.

-Chair back edge to be resilient at perimeter of mesh to protect mesh edge.

Mesh must not wrap around the outer perimeter of the chair back.

-Minimum weight capacity must be 300 lbs.

-Fabric must not contain PFOS and PFOA.

-Chair must meet ANSI and BIFMA standards.

-Chair must have a lifetime limited warranty.

FOB: Origin (Shipping Point)

MILSTRIP: MMP1003267323

0026 56 Each GUEST CHAIR, Executive

FFP

-Brand Name or Equal: GUEST CHAIR, EXECUTIVE

-Manufacturer: Darran Cosmos; Part number: COS2332FUB39

-Dimensions: Chair: 30-34 inches High x 22-24 inches Depth x 22-26 inches

Width.

-Chair must have a veneer frame that matches the finish selection in the Executive office.

-Chair must be constructed with mortise and tenon joints or double doweled to ensure long-term use.

-Must have square open wood arms with a clean out.

-Seat must be webbed to provide maximum support for seat cushions that are high-resiliency foam and generous for increased comfort.

-Chair must be fully upholstered in high grade vinyl.

-Fabric must not wrap around the side of the chair back.

-Fabric must not contain PFOS and PFOA.

-Minimum weight capacity must be 250 pounds.

-Chair must meet ANSI and BIFMA standards.

-Warranty shall be included.

FOB: Origin (Shipping Point)

MILSTRIP: MMP1003267323

0027 11 Each GUEST CHAIR, Command Suite

FFP

-Brand Name or Equal: GUEST CHAIR, COMMAND SUITE

-Manufacturer: Darran Cosmos; Part number: COS2332FUB39

-Dimensions: Chair: 30-34 inches High x 22-24 inches Depth x 22-26 inches

Width.

-Chair must have a veneer frame that matches the finish selection in the Executive office.

-Chair must be constructed with mortise and tenon joints or double doweled to ensure long-term use.

-Must have square open wood arms with a clean out.

-Seat must be webbed to provide maximum support for seat cushions that are high-resiliency foam and generous for increased comfort.

-Chair must be fully upholstered in high grade leather.

-Fabric must not wrap around the side of the chair back.

-Fabric must not contain PFOS and PFOA.

-Minimum weight capacity must be 250 pounds.

-Chair must meet ANSI and BIFMA standards.

FOB: Origin (Shipping Point)

MILSTRIP: MMP1003267323

0028 41 Each GUEST CHAIR, Managerial

FFP

-Brand Name or Equal: GUEST CHAIR, MANAGERIAL

-Manufacturer: HM Verus; Part number: PIA4S SP

-Dimensions: Chair: 30-34 inches High x 14-18 inches Depth x 22-26 inches

Width.

-Chair must be stackable with 4-point black metal frame.

-Fixed loop arms.

-Glides for soft flooring applications.

-Chair back must have black mesh and vinyl upholstered seat.

-Chair back edge must be resilient at perimeter of mesh to protect mesh edge.

-Mesh must not wrap around the outer perimeter of the chair back.

-Fabric must not contain PFOS and PFOA.

-Minimum weight capacity must be 300 lbs.

-Chair must meet ANSI and BIFMA standards.

-Chair must include a lifetime limited warranty.

FOB: Origin (Shipping Point)

MILSTRIP: MMP1003267323

0029 6 Each LOUNGE CHAIR, Executive

FFP

-Brand Name or Equal: LOUNGE CHAIR, EXECUTIVE

-Manufacturer: OFS Cubic Chair; Part number: 203041

-Dimensions: Chair: 30-34 inches High x 28-32 inches Depth x 26-30 inches

Width.

-Lounge chair must be fully upholstered in high grade vinyl.

-Fabric must not contain PFOS and PFOA.

-Seat and back cushions must be loose and non-tufted using high density urethane foam cushions tested and rated for commercial use.

-Chair must have an exposed wood tapered leg.

-Wood finish must match and/or compliment the executive veneer finish.

-Floor glides must be non-marring.

-Chair must meet ANSI and BIFMA standards.

-Minimum weight capacity must be 350 lbs.

-Warranty shall be provided.

FOB: Origin (Shipping Point)

MILSTRIP: MMP1003267323

0030 2 Each LOUNGE CHAIR, Command Suite

FFP

-Brand Name or Equal: LOUNGE CHAIR, COMMAND SUITE

-Manufacturer: OFS Cubic Chair; Part number: 203041

-Dimensions: Chair: 30-34 inches High x 28-32 inches Depth x 26-30 inches

Width.

-Seat and back cushions must be loose and non-tufted with high density urethane foam cushions tested and rated for commercial use.

-Chair must have an exposed wood tapered leg.

-Wood finish must match and/or compliment the finish selection in the Command

Suite.

-Floor glides must be non-marring.

-Lounge chair must be fully upholstered in high grade leather.

-Fabric must not contain PFOS and PFOA.

-Chair must meet ANSI and BIFMA standards.

-Minimum weight capacity must be 350 pounds.

-Warranty shall be provided.

FOB: Origin (Shipping Point)

MILSTRIP: MMP1003267323

0031 2 Each LOUNGE LOVESEAT, Command Suite

FFP

-Brand Name or Equal: LOUNGE LOVESEAT, COMMAND SUITE.

-Manufacturer: OFS Cubic Love Seat; Part number: 203042

-Dimensions: Loveseat: 30-34 inches High x 28-32 inches Depth x 60-62 inches

Width.

-Seat and back cushions must be loose and non-tufted using high density urethane foam cushions tested and rated for commercial use.

-Chair must have an exposed wood tapered leg.

-Wood finish must match and/or compliment the finish selection in the Command

Suite.

-Floor glides must be non-marring.

-Loveseat must be fully upholstered in high grade leather.

-Fabric must not contain PFOS and PFOA.

-Loveseat must meet BIFMA standards.

-Minimum weight capacity must be 275pounds.

-Warranty shall be provided.

FOB: Origin (Shipping Point)

MILSTRIP: MMP1003267323

0032 3 Each LOUNGE SOFA, Executive

FFP

-Brand Name or Equal: LOUNGE SOFA, EXECUTIVE

-Manufacturer: OFS Cubic Sofa; Part number: 203043

-Dimensions: Sofa: 30-34 inches High x 28-32 inches Depth x 76-78 inches Width.

-Seat and back cushions must be loose and non-tufted using high density urethane foam cushions tested and rated for commercial use.

-Chair must have an exposed wood tapered leg.

-Wood finish must match and/or compliment the finish selection in the Command

Suite.

-Floor glides must be non-marring.

-Sofa must be fully upholstered in high grade vinyl.

-Fabric must not contain PFOS and PFOA.

-Sofa must meet BIFMA standards.

-Minimum weight capacity must be 275 pounds.

-Warranty shall be provided.

FOB: Origin (Shipping Point)

MILSTRIP: MMP1003267323

0033 2 Each Bench with Padding

FFP

-Brand Name or Equal: BENCH

-Manufacturer: OFS Embrace; Part number: EFC1059

-Dimensions: Bench: 22-26 inches High x 26-30 inches Depth x 58-62 inches

Width.

-Bench must have an exposed wood end panel and tapered leg.

-Bolster pillows must be attached with D-ring and elastic straps.

-Bench cushions must be fully upholstered in durable vinyl using high density urethane foam cushions tested and rated for commercial use.

-Wood finish must match and/or compliment the wood stain in the lobby area.

-Bench must have non-marring floor glides.

-Fabric must not contain PFOS and PFOA.

-Bench must meet ANSI and BIFMA standards.

-Minimum weight capacity must be 300 pounds.

-Warranty shall be provided.

FOB: Origin (Shipping Point)

MILSTRIP: MMP1003267323

0034 5 Each

U-SHAPE DESK, VENEER

FFP

-Brand Name or Equal: U-SHAPE DESK, VENEER

-Manufacturer: Darran Capitol Park; Part numbers: CAP7236DS634W, CAP4824BR151W, and CAP7124CA067W

-Dimensions: U-Shape Desk: 28-32 inches High x 34-37 inches Depthx 70-74 inches Width.

-Dimensions: Bridge: 28-32 inches High x 22-25 inches Depth x 46-50 inches

Width.

-Dimensions: Credenza: 22-25 inches Depth, 70-74 inches Width.

-Case goods must be grade A architectural veneers.

-Finish must closely match custom walnut trim finish in building lobby.

-Veneer tops must be a minimum 1-1/8" thick.

-The top surface must have a non-glare or “matte” finish.

-Edge: coped profile edge or similar.

-Veneer grains on "U" shape configuration shall run in the same direction.

-All drawers must be constructed of four sides and a bottom, attached to a drawer front with screws.

-Drawers must be dowel joint constructed, full extension with matte nickel bar pull.

-Drawer suspensions must utilize a heavy-duty full extension metal ball bearing slide for smooth operation. –

-Drawers must be locking with key-random and key-specific options.

-Desk must have BREAKFRONT with full modesty.

-Credenza must have a 2-drawer lateral with front to back filing and open back modesty with wire management rail.

-Box-Box-File must include a pencil tray.

-All floor case goods must have adjustable leveling glides.

-Must include two matte nickel grommets to be field installed.

-Case goods must meet ANSI and BIFMA standards.

-Veneer desking cannot be specified as modular due to molding.

-Warranty shall be provided.

FOB: Origin (Shipping Point)

MILSTRIP: MMP1003267323

0035 6 Each Desk, Single Pedestal, Laminate

FFP

-Brand Name or Equal: SINGLE PEDESTAL DESK, LAMINATE

-Manufacturer: Darran Central Park; Part numbers: CPC7236DS896M and

CPC1618PD440M

-Dimensions: Desk: 28-32 inches High x 28-32 inches Depth x 70-74 inches

Width.

-Case goods must be high-pressure laminate of a uniform quality, free from blisters, wrinkles, cracks, scratches, dent marks, heat marks or other defects.

-High pressure laminate tops must be a minimum 1-1/8" thick.

-The top surface must have a non-glare or “matte” finish.

-Edge: Ledge or knife profile edge.

-The pattern, color and finish must closely match the veneer finish in the executive offices.

-Box-Box-File drawer must be constructed of four sides and a bottom, attached to a drawer front with screws.

-Drawers must be dowel joint constructed, full extension with a matte nickel bar pull.

-Drawer suspensions must utilize a heavy-duty full extension metal ball bearing slide for smooth operation.

-Drawers must be locking with key-random and key-specific options.

-Desk must have STRAIGHT overhang with full modesty and box-box-file pedestal.

-Box-box-file must include a pencil tray.

-All floor case goods to have adjustable leveling glides.

-Must include wire management and two matte nickel grommets to be field installed.

-Case goods must meet ANSI and BIFMA standards.

-Laminate desking should be specified as modular so it can be reconfigured during installation as needed.

-Warranty shall be provided.

FOB: Origin (Shipping Point)

MILSTRIP: MMP1003267323

0036 1 Each Desk, Single Pedestal, Veneer

FFP

-Brand Name or Equal: SINGLE PEDESTAL DESK, VENEER

-Manufacturer: Darran Capitol Park; Part number: CAP7236DS633W

-Dimensions: Desk: 28-32 inches High x 34-38 inches Depth x 70-74 inches

Width.

-Case goods must be grade A architectural veneers.

-Finish must closely match custom walnut trim finish in building lobby.

-Veneer tops must be a minimum 1-1/8" thick.

-The top surface must have a non-glare or “matte” finish.

-Edge: Reverse cove profile edge or similar.

-All drawers must be constructed of four sides and a bottom, attached to a drawer front with screws. Drawers must be dowel joint constructed, full extension with matte nickel bar pull.

-Drawer suspensions must utilize a heavy-duty full extension metal ball bearing slide for smooth operation.

-Drawers must be locking with key-random and key-specific options.

-Desk must have BREAKFRONT with full modesty and box-box-file pedestal.

-Box-Box-File must include a pencil tray.

-All floor case goods must have adjustable leveling glides.

-Must include wire management and two matte nickel grommets to be field installed.

-Case goods must meet ANSI and BIFMA standards.

-Veneer desking cannot be specified as modular due to molding.

-Warranty shall be provided.

0037 22 Each Desk, L-Shape, Veneer

FFP

-Brand Name or Equal: L-SHAPE DESK, VENEER

-Manufacturer: Darran Capitol Park; Part numbers: CAP7236DS633W and

CAP4824RE195W

-Dimensions: Desk: 28-32 inches High x 34-38 inches Depth x 70-74 inches

Width.

-Dimensions: Return: 28-32 inches High x 22-26 inches Depth x 46-50 inches

Width.

-Case goods must be grade A architectural veneers.

-Finish must closely match custom walnut trim finish in building lobby.

-Veneer tops must be a minimum 1-1/8" thick.

-The top surface must have a non-glare or “matte” finish and a coped profile edge or similar.

-All drawers must be constructed of four sides and a bottom, attached to a drawer front with screws.

-Drawers must be dowel joint constructed, full extension with matte nickel bar pull.

-Drawer suspensions must utilize a heavy-duty full extension metal ball bearing slide for smooth operation.

-Drawers must be locking with key-random and key-specific options.

-Desk must have BREAKFRONT with full modesty and box-box-file pedestal.

-Box-Box-File must include a pencil tray.

-Return must have an open back modesty with wire management rail and file-file pedestal.

-All floor case goods must have adjustable leveling glides.

-Must include two matte nickel grommets to be field installed.

-Case goods must meet ANSI and BIFMA standards.

-Veneer desking cannot be specified as modular due to molding.

-Warranty shall be provided.

FOB: Origin (Shipping Point)

MILSTRIP: MMP1003267323

0038 18 Each Desk, L Shape, Laminate

FFP

-Brand Name or Equal: L-SHAPE DESK, LAMINATE

-Manufacturer: Darran Central Park Modular; Part numbers: CPC7230DS896M, CPC4824RE214M, CPC1618PD440M, and CPC1618PD441M

-Dimensions: Desk: 28-32 inches High x 29-33 inches Depth x 70-74 inches

Width.

-Dimensions: Return: 28-32 inches High x 22-26 inches Depth x 40-44 inches

Width.

-Case goods must be high-pressure laminate of a uniform quality, free from blisters, wrinkles, cracks, scratches, dent marks, heat marks or other defects.

-High pressure laminate tops must be a minimum 1-1/8 inches.

-The top surface shall have a non-glare or “matte” finish.

-Edge: ledge or knife edge profile.

-The pattern, color and finish must closely match the veneer finish in the executive office.

-All drawers must be constructed of four sides and a bottom, attached to a drawer front with screws.

-Drawers must be dowel joint constructed, full extension with a matte nickel bar pull.

-Drawer suspensions must utilize a heavy-duty full extension metal ball bearing slide for smooth operation.

-Drawers must be locking with key-random and key-specific options.

-Desk must have STRAIGHT overhang with full modesty and box-box-file pedestal.

-Box-Box-File must include a pencil tray.

-Return must have an open back modesty with wire management rail and file-file pedestal.

-All floor case goods must have adjustable leveling glides.

-Must include wire management and two matte nickel grommets to be field installed.

-Case goods must meet ANSI and BIFMA standards.

-Laminate desking should be specified as modular so it can be reconfigured during installation as needed.

FOB: Origin (Shipping Point)

MILSTRIP: MMP1003267323

0039 21 Each Desk, L Shape, Single FF, Laminate

FFP

-Brand Name or Equal: L-SHAPE DESK SHELL, SINGLE FF PEDESTAL

RETURN, LAMINATE

-Manufacturer: Darran Central Park Modular; Part numbers: CPC7236DS896M, CPC4824RE214M, and CPC1618PD424M.

-Dimensions: Desk: 28-32 inches High x 29-33 inches Depth x 70-74 inches

Width.

-Dimensions: Return: 28-32 inches High x 22-26 inches Depth x 40-44 inches

Width.

-Case goods must be high-pressure laminate of a uniform quality, free from blisters, wrinkles, cracks, scratches, dent marks, heat marks or other defects.

-High pressure laminate tops must be a minimum 1-1/8".

-The top surface shall have a non-glare or “matte” finish.

-Edge: ledge or knife edge profile.

-The pattern, color and finish must closely match the veneer finish in the executive office.

-All drawers must be constructed of four sides and a bottom, attached to a drawer front with screws.

-Drawers must be dowel joint constructed, full extension with a matte nickel bar pull.

-Drawer suspensions must utilize a heavy-duty full extension metal ball bearing slide for smooth operation. Drawers must be locking with key-random and key-specific options.

-Desk must have STRAIGHT overhang with full modesty.

-Return must have an open back modesty with wire management rail and file-file pedestal.

-Mobile box-box-file pedestal must fit under the desk surface, have a finished back and include a pencil tray.

-All floor case goods must have adjustable leveling glides.

-Must include wire management and two matte nickel grommets to be field installed.

-Case goods must meet ANSI and BIFMA standards.

-Laminate desking should be specified as modular so it can be reconfigured during installation as needed.

FOB: Origin (Shipping Point)

MILSTRIP: MMP1003267323

0040 3 Each Desk, L-Shape, Single FF Return, Laminat

FFP

-Brand Name or Equal: L-SHAPE DESK SHELL, SINGLE FF PEDESTAL

RETURN, LAMINATE

-Manufacturer: Darran Central Park Modular; Part numbers: CPC6630DS896M, CPC4824RE214MX1, CPC1618PD424M.

-Dimensions: Desk: 28-32 inches High x 29-33 inches Depth x 64-67 inches

Width.

-Dimensions: Return: 28-32 inches High x 22-26 inches Depth x 40-44 inches

Width.

-Case goods must be high-pressure laminate of a uniform quality, free from blisters, wrinkles, cracks, scratches, dent marks, heat marks or other defects.

-High pressure laminate tops must be a minimum 1-1/8".

-The top surface shall have a non-glare or “matte” finish.

-Edge: ledge or knife edge profile.

-The pattern, color and finish must closely match the veneer finish in the executive office.

-All drawers must be constructed of four sides and a bottom, attached to a drawer front with screws.

-Drawers must be dowel joint constructed, full extension with a matte nickel bar pull.

-Drawer suspensions must utilize a heavy-duty full extension metal ball bearing slide for smooth operation.

-Drawers must be locking with key-random and key-specific options.

-Desk must have STRAIGHT overhang with full modesty.

-Return must have an open back modesty with wire management rail and file-file pedestal.

-Mobile box-box-file pedestal must fit under the desk surface, have a finished back and include a pencil tray.

-All floor case goods must have adjustable leveling glides.

-Must include wire management and two matte nickel grommets to be field installed.

-Case goods must meet ANSI and BIFMA standards.

-Laminate desking should be specified as modular so it can be reconfigured during installation as needed.

FOB: Origin (Shipping Point)

MILSTRIP: MMP1003267323

0041 2 Each Desk Shell, Laminate

FFP

-Brand Name or Equal: DESK SHELL, LAMINATE

-Manufacturer: Darran Central Park; Part number: CPC7230DS896M.

-Dimensions: Desk: 28-32 inches High x 29-33 inches Depth x 70-74 inches

Width.

-Case goods must be high-pressure laminate of a uniform quality, free from blisters, wrinkles, cracks, scratches, dent marks, heat marks or other defects.

-High pressure laminate tops must be a minimum 1-1/8" thick.

-The top surface must have a non-glare or “matte” finish.

-Edge: ledge or knife profile edge.

-The pattern, color and finish must closely match the veneer finish in the executive offices.

-Desk must have STRAIGHT overhang with full modesty.

-Mobile box-box-file pedestal must fit under the desk surface, have a finished back and include a pencil tray.

-Drawers must be locking with key-random and key-specific options.

-All floor case goods to have adjustable leveling glides.

-Must include wire management and two matte nickel grommets to be field installed.

-Case goods must meet ANSI and BIFMA standards.

FOB: Origin (Shipping Point)

MILSTRIP: MMP1003267323

0042 1 Each Desk Shell, Laminate

FFP

-Brand Name or Equal: DESK SHELL, LAMINATE

-Manufacturer: Darran Central Park; Part number: CPC5430DS896MX1.

-Dimensions: Desk: 28-32 inches High x 29-33 inches Depth x 48-56 inches

Width.

-Case goods must be high-pressure laminate of a uniform quality, free from blisters, wrinkles, cracks, scratches, dent marks, heat marks or other defects.

-High pressure laminate tops must be a minimum 1-1/8" thick.

-The top surface must have a non-glare or “matte” finish.

-Edge: ledge or knife profile edge.

-The pattern, color and finish must closely match the veneer finish in the executive offices.

-Desk must have STRAIGHT overhang with full modesty.

-All floor case goods to have adjustable leveling glides.

-Must include wire management and two matte nickel grommets to be field installed.

-Case goods must meet ANSI and BIFMA standards.

FOB: Origin (Shipping Point)

MILSTRIP: MMP1003267323

0043 4 Each Refrigerator, Millwork

FFP

Brand Name or Equal: REFRIGERATOR - MILLWORK

-Manufacturer: Whirlpool; Part number: WRF560SEHZ

-Refrigerator shall fit into millwork dimensions: High x 3 feet Depth x 3 feet

Width.

Refrigerator must be a French door bottom drawer freezer.

-Finger print resistant stainless steel.

-Adjustable leveling system.

-It shall have the following features: auto-defrost, interior lighting, tuck shelf, adjustable shelves, door bin, full-width pantry drawer, humidity-controlled crispers.

-It must include 1-year warranty on parts and labor.

-Buy American Compliant and Energy Star Rated.

-Refrigerator and Microwave appliances are same manufacturer.

FOB: Origin (Shipping Point)

MILSTRIP: MMP1003267323

0044 4 Each Microwave, Millwork

FFP

-Brand Name or Equal: MICROWAVE - MILLWORK

-Manufacturer: Frigidaire; Part number: WMT55511KS

-Microwave shall fit into millwork dimensions: 1 foot 4 inches High x 1 foot 10 inches Depth x 2 feet 10 inches Width.

-Microwave has a 1.1 cubic foot capacity.

-Unit has a stainless steel door and silver body.

-Minimum 1000 watt high power.

-Microwave has 10 power levels and preset auto cook menu items.

-Microwave must be commercial grade and offer a braille option.

-Microwave has a minimum 1 year warranty on parts and labor.

-Buy American Compliant and Energy Star Rated.

-Must include trim kit for installation into casework.

-Refrigerator and Microwave appliances are same manufacturer.

FOB: Origin (Shipping Point)

MILSTRIP: MMP1003267323

0045 4 Each Microwave, Counter

FFP

-Brand Name or Equal: MICROWAVE - COUNTER

-Manufacturer: Whirlpool; Part number: WMC30516HZ

-Minimum 1.6 cubic foot capacity and 1200 watt high power

-Glass turntable.

-Unit has a stainless steel door and silver body.

-Microwave has 10 power levels and preset auto cook menu items.

-Microwave has a 1 year warranty on parts and labor.

-Buy American Compliant and Energy Star Rated.

-Refrigerator and Microwave appliances are same manufacturer.

FOB: Origin (Shipping Point)

MILSTRIP: MMP1003267323

0046 4 Each Coffee Maker, 3 Pot, Commercial

FFP

-Brand Name or Equal: 3 POT COFFEE MAKER

-Manufacturer: Bunn; Part number: VP17-3

-12 cup low profile pour over coffee brewer.

-Shall have 3 warmers.

-Plumbing or special wiring must not be required.

-Must be decanter coffee server type.

-Must be finished in stainless steel.

-Coffee carafe ordered separately.

-Warranty has minimum 1 year parts and labor.

-Buy American Compliant and Energy Star Rated.

FOB: Origin (Shipping Point)

MILSTRIP: MMP1003267323

0047 20 Each Coffee Carafes

FFP

-Brand Name or Equal: COFFEE Carafes (EXTRA)

-Manufacturer: Bunn; Part numbers: 06100.0101 and 06101.0101

-Carafes must be compatible to Coffee Maker.

-Shall include three black handle glass carafes and two orange handle glass carafes per coffee machine.

-Carafes must feature reliable, shatter-resistant laboratory-grade glass.

-Buy American Compliant.

FOB: Origin (Shipping Point)

MILSTRIP: MMP1003267323

0048 3 Each Power Module

FFP

-Brand Name or Equal: SURFACE ATTACHED POWER MODULE

-Manufacturer: Herman Miller; Part number: Y1414.L03S

-Clamp-mount attached module.

-Shall include two simplex receptacles or one simple receptacle & dual USB-A and

USB-C charging ports.

-Must provide cord lengths to accommodate connection to power source.

-Provide warranty information.

FOB: Origin (Shipping Point)

MILSTRIP: MMP1003267323

0049 2 Each Lectern, Veneer

FFP

-Brand Name or Equal: LECTERN, VENEER

-Manufacturer: Darran; Part number: CPC2424LC499W

-Dimensions: Lectern: 44-46 inches High x 22-26 inches Depth x 22-26 inches

Width.

-Case goods must be grade A architectural veneers.

-Finish must closely match custom walnut trim finish in building lobby.

-Veneer tops must be a minimum 1-1/8" thick.

-The top surface must have a non-glare or “matte” finish.

-Lectern must have a front panel, adjustable shelves and front casters.

-Power/data connection will be provided at the wall.

-Integrated power/data ports are not required on lectern.

-Must include grommet on user side (right) at lectern base and top shelf.

-Must include "mouse" cutout in back corner of each shelf.

-Awarded vendor must provide a dimensioned shop drawing for owner approval prior to order.

-Case goods must meet ANSI and BIFMA standards.

FOB: Origin (Shipping Point)

MILSTRIP: MMP1003267323

0050 3 Each Door Mat, Logo, Exterior 5x4

FFP

-Brand Name or Equal: DOOR MATS, LOGO

-Manufacturer: Custom-Mats.com; Part number: N/A Custom with Logo

-Dimensions: 5 feet Wide x 4 feet Depth

-Commercial grade low-profile Berber.

-Materials must be high-quality, durable and suitable for EXTERIOR of building at entrance.

-Mat backing must be slip resistant.

-Front of mat must have solid black background.

-Government will provide digital logo file to awarded vendor. See notes in

REMARKS section.

-Exterior door mat must contain "Make Ready" logo centered on the mat.

Gold - RGB 248,195,17

Green - 65,114,107

Black - 0,0,0

Red Banner - 176,38,48

Red Arrow - 216,42,37

0051 2 Each Door Mat, Interior 5x4

FFP

-Brand Name or Equal: DOOR MATS

-Manufacturer: Custom-Mats.com; Part number: N/A Platinum Series

-Dimensions: 5 feet Wide x 4 feet Depth

-INTERIOR walk-off mat.

-Premium polypropylene for high traffic areas.

-High-quality rubber backing and leading edge.

-Color: Black with leading edge black

-Mat must capture moisture, be easy to clean, easy to maintain and colorfast.

-Mat must not be a trip hazard.

0052 3 Each Door Mat, Interior 3x3

FFP

-Brand Name or Equal: DOOR MATS

-Manufacturer: Custom-Mats.com; Part number: N/A Platinum Series

-Dimensions: 3 feet Wide x 3 feet Depth

-INTERIOR walk-off mat.

-Premium polypropylene for high traffic areas.

-High-quality rubber backing and leading edge.

-Color: Black with leading edge black

-Mat must capture moisture, be easy to clean, easy to maintain and colorfast.

-Mat must not be a…