21 0924 Rock Falls new dryer for 5 and 10 hp compressor.docx
DOCX document 15 KB Posted
- Attached to
- OWR Sinnissippi Dryers and alternator switch
- Solicitation number
- 22-422DNR-WTRRE-B-25437
- Issued by
- Illinois
About this file
This document is a solicitation from the Office of Water Resources for the replacement of two air compressor dryers - a heatless desiccant dryer for a 10 hp compressor and a refrigerated style dryer for a 5 hp compressor. The new dryers must meet specific technical requirements for dew point, pressure rating, inlet capacity, and electrical connections. The bid shall include removing and disposing of the existing HRM 42-F6 heatless dryer, providing and installing the new dryers, and properly plumbing the dryers to the air compressors and tanks. Vendors must provide product literature with their quote, and shipping costs should be included. The dryers must be new, unused, and free from defects. The solicitation allows for "or equal" submissions that meet the specified requirements.
The solicitation does not provide details on pricing terms, set asides, incumbents, funding requirements, or award details. It focuses solely on the technical specifications and installation requirements for the replacement air compressor dryers.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Standard Terms and Conditions 1~34.pdf | ||
| Standard Certifications ~32.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Office of Water Resources is soliciting bids for the replacement of an HRM 42-F6 heatless desiccant dryer that services an Ingersall Rand 10 hp two stage air compressors, and the replacement of a refrigerated style dryer for the Ingersoll Rand 5 hp compressor. The replacement dryers shall be both be the same model heatless desiccant dryers capable of meeting the following specifications:
| Dew Point Setting | -40 degrees Farenheit Maximum | |
| Pressure Rating | 200 psig or greater | |
| Inlet Capacity | 39 scfm Minimum | |
| Electrical | 115/1/60 | |
| Connections | 3/4” NPT or fittings to connect to existing 3/4” NPT pipe |
The bid shall include the removal and disposal of the HRM 42-F6 heatless dryer, the new dryers, and complete installation and setup of the new dryers. The new dryers will need to be plumbed correctly from the compressors to the air tanks and to the dryers.
Vendor should provide product literature with the quote. Shipping costs to be included with bid. Product must be new, unused and free from defects. Shipping F.O.B. The use of a brand name is for describing the standard of quality, performance, and characteristics desired and is not intended to limit or restrict competition. Or Equal submissions will not be rejected because of minor differences in design, construction or features that do not affect the suitability of the product for its intended use. Burden of proof that the product is equal is on the bidder.
File details come from the government source that posted it. Updated .