Attachment 1 Target MS HiPiMS 1200 (monobloc target).pdf
PDF 48 KB Posted
- Attached to
- Chrome Targets
- Solicitation number
- 2031ZA26Q00041
About this file
This is an engineering drawing for a "Monobloc Target" component. The drawing is presented at a 1:2 scale on an A3 sheet size and was issued on 08-03-21. The component features a rectangular profile with specific dimensional tolerances: a length of 402 mm (with a tolerance of -0.3 mm), a height of 131 mm (with a tolerance of -0.2 mm), and a height dimension of 16 mm. General fabrication tolerances are specified as ±0.2 mm for dimensions to one decimal place, ±0.1 mm for two decimal places, ±0.05 mm for three decimal places, and ±0.005 mm for four decimal places. Angular tolerances are set at 0°30' unless otherwise stated.
The drawing specifies that the initial state of the surface must be free from indentations, gouges, and scratches, with a surface finish specification of 3.2 and 6.4 micrometers. The drawing uses first angle projection and indicates "DO NOT SCALE" as a critical note. The document references "SEE NOTE A" for additional specifications and material information, though the specific note details are not fully legible in the provided image. This appears to be a fabrication drawing requiring adherence to specified dimensional and surface quality standards, with no revision history entries noted at the time of issue.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
1 2 3 4 5 6 7 8 9 10 11 12
H
1 2 3 4 5 6 7 8 9 10 11 12
D
G
F
E
A
C
B
D
G
F
E
A
C
B
H
FIRST ANGLE
DATE
DRAWING NUMBER
DRAWN BY
ORIGINAL SCALE
MATERIAL SPECIFICATION
CHECK DATE
MAKE FROM
TREATMENT/HARDNESS/FINISH
SUPPLIER TYPE 0.2
INITIAL STATE OF SURFACE MUST
BE FREE FROM INDENTATIONS,
GOUGES AND SCRATCHES.
ANGLE TOLERANCES 0 30'
ALL HOLES
UNLESS STATED OTHERWISE.
DESCRIPTION
CHECKED BY DESIGN APPROVED BY APPROVAL DATE REVISION
PERMITTED GENERAL
TOLERANCES UNLESS
OTHERWISE STATED;
FABRICATIONS 1
0. 0.2 .0 0.1
.00 0.05 .000 0.005
ORIGINAL SHEET SIZE
ALL DIMENSIONS EXPRESSED
IN mm UNLESS
OTHERWISE STATED.
3.2 6.4
402 -0.3
-0
.2
1:2 08-03-21
A3 MONOBLOC TARGETSEE_NOTE
DO NOT SCALE SHEET 1 OF 1
An.a. n.a. n.a. n.a.
ISSUE AUTHOR DETAIL OF CHANGE ECO REF DATE
A FOR ISSUE ~ n.a.
| Sheet 1 |
| Views |
| new_view_1 |
| bottom_2 |
| Zones |
| A1 |
File details come from the government source that posted it. Updated .