Appendix A.pdf
PDF 553 KB Posted
- Attached to
- Sandblast Set of PVD Parts
- Solicitation number
- 2031ZA24Q00307
About this file
This document appears to be an appendix that provides a list of components associated with a PVD (Physical Vapor Deposition) system, along with details on the quantity and material composition of each part. The key details are:
The document lists 35 different components that are part of the PVD system, including shields, plates, rods, and other hardware. All components are made of AISI 304 stainless steel, except for the upper/lower and side anodic plates which are made of stainless steel. The total quantity of parts is not specified, but the document notes that the quantities listed are for a single PVD system. The appendix indicates that all components will require sandblasting services, with the vendor cautioned to avoid deforming the materials during the process. The minimum dimensions of the parts are provided as 10 inches longer and 2 inches wider, with a maximum weight of 3 lbs.
The document is supplementary to a federal contract opportunity for the Department of the Treasury Bureau of Engraving and Printing to solicit quotes for sandblasting a set of PVD parts. The solicitation number is 2031ZA24Q00307.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Media Blasting List Appendix A_2 Revised.xlsx | XLSX spreadsheet | |
| RFQ 2031ZA24Q00307 - Sandblast Set of PVD Parts.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
# DESCRIPTION Qty MATERIAL Image
1 UPPER LEFT
CHAMBER SHIELD
1 AISI 304
2 UPPER RIGHT
CHAMBER SHIELD
1 AISI 304
3 VIEWPORT SIDE
UPPER SHIELD
1 AISI 304
4 VIEWPORT SIDE
LOWER SHIELD
1 AISI 304
5 VIEWPORT SIDE
FRONT SHIELD
1 AISI 304
6 VIEWPORT SIDE
REAR SHIELD
1 AISI 304
7 LOWER CHAMBER
SHIELD
1 AISI 304
8 CRYOGENIC TRAP
SHIELD
1 AISI 304
9 PUMPING SHIELD 1 AISI 304
10 SHUTTER
VIEWPORT
1 AISI 304
11 SIDE CATHODE
SHIELD TW
6 AISI 304
12 SIDE CATHODE
SHIELD TW
6 AISI 304
13 TOP SHIELD TW 1 AISI 304
14 BOTTOM SHIELD
TW
1 AISI 304
15 SIDE CATHODE
SHIELD TW
6 AISI 304
16 SIDE CATHODE
SHIELD TW
6 AISI 304
17 UPPER CATHODE
SHIELD TW
6 AISI 304
18 LOWER CATHODE
SHIELD TW
6 AISI 304
19 SHUTTER PANEL 6 AISI 304
20 ROTARY TABLE
COVER
1 AISI 304
21 SATELLITE COVER 1 AISI 304
22 INTERMEDIATE
RING
1 AISI 304
23 END RING 2 AISI 304
Upper Drum Rods, BIAS POWER
COLLAR
12 AISI 304
25a Lower Drum Rods, BIAS POWER
COLLAR
6 AISI 304
25b Support Foot 6 AISI 304
26 LEFT CHAMBER
HEATER PLATE
1 AISI 304
27 RIGHT CHAMBER
HEATER PLATE
1 AISI 304
29 HEATER LOCKING
COMB
3 AISI 304
30 PLATE FRAME 6 AISI 304
31 PLATE FRAME
BRACKET
12 AISI 304
32 6 AISI 304
33 Upper/lower Anodic plate stainless steel
34 Side Anotic Plate 24 stainless steel
Tube for gas shower up to 6
1. Do all of the components in this document require sandblasting services?
Yes, everything in this document will require sandblasting. All the quantities above are for when we are considering 1 PVD system As with sandblasting anything, the vendor has to take care to not deform the material.
2. What are the minimum dimensions and weight of parts?
a. 10 inches longer and 2 inches wide
b. Weight is under 3 lbs
Sheet1
File details come from the government source that posted it. Updated .