2031ZA21Q00207.pdf

REQUEST FOR QUOTATION

Prescription (Rx) Safety Glasses for the Washington, DC Currency Facility

2031ZA21Q00207

Table of Contents

Section Description Page Number(s)

A General Information 2 B Pricing Schedule 3 - 5 C Performance Work Statement 6 - 8 D Packaging and Handling 9 – 10 E Inspection and Acceptance 11 F Delivery or Performance 12 G Contract Administration Data 13 - 14 H Special Contract Requirements 15 - 17 I Contract Clauses 18 – 24 J Attachments 25 K Certifications 26 - 40 L Instructions to Offerors 41 - 42 M Evaluation 43

2 Bureau of Engraving and Printing 2031ZA21Q00207

SECTION A – GENERAL INFORMATION

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued.

1.0 This solicitation document and incorporated provisions and clauses are those in effect through

Federal Acquisition Circular 2021-06 effective 12 July 2021.

2.0 This procurement is set aside for small business concerns with a size standard of 1,000. The associated NAICS code is 339115, Ophthalmic Goods Manufacturing.

3.0 The Defense Priorities and Allocations System (DPAS) and assigned rating are not applicable to this procurement.

[END OF SECTION]

3 Bureau of Engraving and Printing 2031ZA21Q00207

SECTION B – PRICING SCHEDULE

1.0 AUTHORITY.

A. This Blanket Purchase Agreement (BPA) is established under the authority of Subpart FAR 13.303, Blanket Purchase Agreements.

B. The purpose of this BPA is to provide Prescription (Rx) Safety Eyewear for employees at the Bureau of Engraving (BEP) District of Columbia Facility (DCF).

C. The Contractor shall comply with all terms and conditions under this BPA and BPA Calls “hereafter referred to as Calls” issued against the BPA. The terms and conditions in this BPA apply to all Calls placed pursuant to it. In the event of an inconsistency between the provisions of the BPA and Calls, the provisions of this BPA will take precedence.

D. The BPA shall be reviewed by the Contracting Activity at least annually before the anniversary of each ordering period and revised as necessary to conform to the requirements of the Federal Acquisition Regulation and applicable supplements or statutory requirements.

E. The BPA may be modified only by mutual agreement of the parties. Any change shall be effective only through written modification to this Agreement and not by individual orders issued hereunder. Modifications to this Agreement shall have no retroactive effect on orders previously issued.

F. Government funds are obligated only to the extent that a duly issued order creates such obligation. In order to provide maximum flexibility for market conditions and other price-influencing factors, which may vary from time to time, Offerors, will be required to submit unit prices for each of the anticipated 5-year duration of the BPA.

Each order under the BPA shall be on a firm, fixed price basis.

2.0 BLANKET PURCHASE AGREEMENT LINE ITEM NUMBER STRUCTURE.

A. BPA Line Item Numbers will be established on each Call that is placed against this BPA. All pricing shall be in accordance with Contractor’s pricing in paragraph 3.0, Pricing of this Section.

B. The prices under this BPA will undergo annual review by the Contracting Officer.

3.0 PRICING (see Attachment A)

4.0 AWARDING CALLS UNDER THE BLANKET PURCHASE AGREEMENT.

A. BPA Call: The Government will reimburse the Contractor for services rendered. A Call is the contractual instrument issued by the Government to the Contractor to order work. The call is issued upon agreement between the Government and the Contractor on the performance, performance time, and the price for the services. An individua l

4 Bureau of Engraving and Printing 2031ZA21Q00207 call will be fixed price. Order for Supplies or Services Form (Optional Form 347) will be issued for each Calls. BPA Calls may be mailed, emailed, or faxed, whichever is more expeditious. The government reserves the right to issue BPA Call orders unilaterally.

Calls placed under this BPA shall contain the following information:

• Date of Call.

• BPA number and BPA Call number.

• Item number and scope of work.

• Delivery or performance date.

• Place of delivery or performance.

• Packaging, packing, and shipping instructions.

• Accounting and appropriation data.

• Any other pertinent information.

B. Modifications to Calls may be required due to increased scope of services or a decreased scope of services. Modifications are issued pursuant to specific standard clauses contained in the basic agreement. All Calls are subject to the terms and conditions of this BPA. In the event of conflict between a Call and this BPA, the BPA shall control.

C. This Blanket Purchase Agreement does not guarantee the Contractor issuance of any

Calls.

5.0 DELIVERY TICKET.

All services under the agreement shall be accompanied by delivery tickets or sales slips that shall contain the following minimum information:

• Company name

• BPA number and BPA Call number

• Date of the services

• Itemized list of eyewear, employee name, quantity, unit price, and extension of each item, less applicable discounts

6.0 INVOICES.

A summary invoice shall be submitted at least monthly or upon expiration of this BPA, whichever occurs first, for all deliveries made during a billing period, identifying the delivery tickets covered therein, stating their total dollar value, and supported by receipt copies of the delivery tickets.

7.0 ORDERING PERIOD.

The BPA shall have an ordering period from the effective date of the agreement for a total of five (5) years or when the BPA ceiling is reached, whichever occurs first.

8.0 AUTHORIZED USERS.

Warranted Government BEP Contracting Officers and designated Contracting Officer

5 Bureau of Engraving and Printing 2031ZA21Q00207

Representative are the only users to place calls under this BPA. This BPA is for BEP use only.

9.0 LIMITS.

This BPA does not obligate any funds, and it does not authorize any work. The Government is under no obligation to the BPA holder to purchase any specified quantity or dollar value of services. The Government is obligated only to the extent of authorized orders made under the BPA. It is the responsibility of the individual ordering entities under the BPAs to ensure adequate funds are available. There is no limit on the dollar value of order purchases made under this BPA.

10.0 CANCELLATION.

The Contracting Officer may unilaterally cancel this BPA if the BPA holder fails to perform in accordance with the terms and conditions of this BPA, any Call established under this BPA, or if deemed in the best interest of the Government.

11.0 NOTIFICATION REGARDING ADMINISTRATIVE OR OTHER ISSUES.

If at any time during the performance of this BPA, administrative or other issues should arise which will have an adverse impact on timely performance by the BPA Holder or affect the costs or funding, the BPA Holder is required to immediately notify the Contracting Officer identified in this BPA. This notification shall be in writing.

12.0 BPA TERMS AND CONDITIONS FLOWDOWN.

The BPA Holder shall execute binding agreements with its subcontractors, if any, which, as a minimum, establish that:

• BPA Terms and Conditions specified are applicable to all efforts ordered under this

BPA.

• If additional clauses are needed, they will be included in the individual Calls.

6 Bureau of Engraving and Printing 2031ZA21Q00207

SECTION C – PERFORMANCE WORK STATEMENT

SECTION 1 – GENERAL

The scope of work involves providing Prescription (Rx) Safety Eyewear for the employees of the Bureau of Engraving (BEP), District of Columbia Facility (DCF). The DCF policy requires employees who work in areas where safety eyewear is required to be provided with adequate eye protection.

1.1 PERFORMANCE OBJECTIVE

The objectives of this agreement is to provide DCF personnel with comfortable, quality Rx safety eyewear. There is a need for an optician to visit the BEP to provide comprehensive optical services (eye examinations excluded). These services include providing a wide variety frames in multiple styles and colors for onsite fitting. In addition, the contractor will manufacture Rx safety eyewear in accordance with the specifications noted on each employee’s Rx. The contractor shall provide various lenses (single, bi-focal and progressive), tinted lenses to include rose, gray and transition, and glass or plastic lenses. The contractor shall also provide employees with professional consultation on the type and proper fit of eyewear, and its applicability to protect against eye hazards in the employee’s daily workplace while they try on, select and procure Rx safety eyewear.

1.2 BACKGROUND

The DCF employs approximately 1,200 persons and operates 24 hours a day, up to seven days a week.

The facility is located at 14th & C Streets, S.W., Washington, DC 20228. As part of its Environmental, Health and Safety (EHS) Program, the DCF requires employees to wear protective safety eyewear when entering and/or working in designated eye hazardous areas.

SECTION 2 – WORK ELEMENTS

The contractor will be scheduled to visit the DCF eight (8) times per year. When on the premises, the optician shall be onsite and made available to employees during the scheduled shift. BEP/DCF shifts are as follows: Day shift – 6:30 a.m. to 3:00p.m., Evening shift – 2:30 p.m. to 11:00 p.m., and Midnight shift from 10:30 p.m. to 7:00 a.m.

The optician will be required to be onsite for the Day and Evening shifts from 1:00 p.m. to 4:00 p.m.

and on the Midnight shift from 10:00 p.m. to 11:30 p.m.

2.1 The site for this supply service is located at 14th & C Streets., S.W., Washington, DC 20228. The optician will service employees during the day and evening shifts in Rm. 648-A (Conference Rm.). Midnight shift personnel will be serviced in the BEP Health Unit. As the BEP-DCF is a secure facility, a valid picture ID is required to gain access. Parking availability and location may be subject to change based on planned facility events, construction projects and other security requirements.

2.2 BEP has established a $40.00 limit for the cost of all available safety glasses frames. This limit applies ONLY to the cost of the frames. The contractor must provide a large variety and

7 Bureau of Engraving and Printing 2031ZA21Q00207 styles of frames within the $40.00 price stipend. Employees will be issued only one pair of safety glasses per prescription. Those employees wishing to receive frames that exceed the established dollar limit will be required to pay the difference directly to the contractor when the order is placed.

2.3 The optician shall issue and ensure proper fit of Rx safety eyewear to employees while on site.

Those employees who cannot acquire safety eyewear due to unavailability (i.e. frame out of stock, etc.) may order safety eyewear that will be shipped directly to the BEP Personal Protective Equipment (PPE) coordinator for distribution to the employee.

2.4 All Rx safety eyewear must meet all requirements outlined in ANSI Z87.1-2015 "American

National Standard for Personal Protection – Safety Glasses”.

2.5 The contractor shall provide a variety of styles and sizes of Rx safety eyewear for selection to fit a diverse workforce.

2.6 The contractor shall provide a point of contact with telephone, email and fax numbers to the

Contracting Officer Representative (COR) upon BPA award.

2.7 The contractor shall provide an accurate invoice of goods sold within 30 days to the Government.

2.8 Comply with all requirements outlined in the DCF EHS Policies and Procedures. The contractor must provide an environment for selecting safety eyewear that is free from hazards.

SECTION 3 - SCHEDULING

The following information describes scheduling requirements for this contract:

3.1 Unless otherwise stipulated by the government, the contractor shall begin tasks outlined in this

PWS in accordance with the mutually agreed upon schedule. The contractor is expected to be available to schedule for all BEP work shifts.

3.2 Within 10 days after the award, the contractor shall hold a telephone conference meeting with the COR to review contract requirements and set a schedule to visit the facility through the period of performance. At least 10 days’ notice is required in the event the contractor needs to change the schedule. Any visit cancellation notice must be directly communicated to the COR.

SECTION 4 - QUALITY ASSURANCE SURVEILLANCE PLAN (QASP):

The Government shall evaluate the contractor’s performance under this contract in accordance with the Quality Assurance Surveillance Plan (QASP). The QASP is a Government only document primarily focused on what the Government must do to assure that the contractor has performed in

8 Bureau of Engraving and Printing 2031ZA21Q00207 accordance with the requirements of the contract. The following items shall be completed by the COR.

4.1 The COR shall assure the quality of goods sold by random sampling of goods sold to DCF employees to ensure they comply with ANSI Z87.1-2015.

4.2 The COR shall periodically inspect to assure that the optician is onsite and available for the required time per the established schedule.

SECTION 5 – SPECIAL CONDITIONS

Any oral directives, instructions, explanations, commitments and/or acceptances given by any government employee to the service provider or his personnel, shall not be construed by the service provider as a change in scope to this Contract. Any change in scope of work must be issued to the service provider, in writing, by the BEP’s Contracting Officer to be binding on the government.

9 Bureau of Engraving and Printing 2031ZA21Q00207

SECTION D – PACKAGING AND HANDLING

NOTICE OF PACKING SLIP REQUIREMENTS:

The following outlines the Bureau of Engraving and Printing’s packing slip requirements to ensure efficient processing of shipments to the Washington, District of Columbia; Landover, Maryland; and Fort Worth, Texas buildings:

• The Bureau of Engraving and Printing requires that all packing slips be placed in a self-adhesive pack list envelope and affixed to the outside a shipment.

• The packing slip will include, at minimum, the following information:

GENERAL ITEMS – Information required for each shipment:

• Purchase Order Number – The order number BEP assigned to this purchase

• Shipping Address – Point from which the merchandise was shipped

• Telephone Number – The telephone number of the vendor contact to be called for inquires related to the merchandise

• Customer Information – The name and telephone number of the party to which the merchandise is being shipped

• Total Weight of Packages (if item is sold to BEP in pounds)

• If items are drop shipped from a supplier, you must ensure the proper purchase order number is written on the packing slip by your supplier

LINE ITEMS – Information required for each line item included in the shipment:

• Manufacturer Product Identification – Item Number assigned by manufacturer/supplier.

• BEP Product Identification (If Applicable) –Stock Item Number assigned by BEP.

• Quantity Ordered – Quantity on the purchase order or unit of measurement.

• Quantity Shipped – With the packing slip.

• Quantity Back-ordered, where applicable.

• If the packing slip contains multiple purchase orders, each line item should include the applicable purchase order number.

NOTICE OF SHIPPING LABEL REQUIREMENTS:

Every box/skid must have at least one shipping label applied to it. The label is to include, at minimum, the following information:

• Manufacturer or Supplier – Name of Manufacturer or supplier/and

• Shipping Address – Point from which the merchandise was shipped/and

• BEP Purchase Order Number - PO# or CC order #/ and

• Customer Name & Telephone Number – First and last name, building and room #.

**Failure to adhere to the packing slip and shipping label requirements could result in shipment rejection, processing delay, and payment delay. **

10 Bureau of Engraving and Printing 2031ZA21Q00207

Delivery Requirements:

The following DELIVERY information must be provided when scheduling delivery appointments: (1) Name of supplier/manufacturer; (2) Contract/Purchase Order #; (3) Total number of items; (4) Total weight (if applicable), and; (5) Date and time of delivery

Deliveries to WASHINGTON, D.C. ANNEX BUILDING – (LOADING DOCK ON “D”

STREET SW, BETWEEN 13TH & 14TH STREETS SW):

Vendors must call the appointment hotline at (202) 874-2333 twenty-four (24) hours in advance to schedule approximate delivery times. The hotline is manned from 6:30 am to 2:15 pm Monday through Friday. A voicemail message maybe left after normal working hours. Deliveries are accepted between 8:00 am and 2:15 pm, Monday through Friday, excluding holidays.

Over the road vehicles having an overall height exceeding 12’6” (3.8 meters) empty, or an overall length exceeding 42’ (12.2 meters) cannot be accommodated at our receiving platform.

To resolve any delivery issue, please contact Shipping & Receiving at (202) 874-3620 care of Material Handler/Leader.

11 Bureau of Engraving and Printing 2031ZA21Q00207

SECTION E – INSPECTION AND ACCEPTANCE

CLAUSE

NUMBER

TITLE

DATE

52.246-1 Contractor Inspection Requirements APR 1984 52.246-2 Inspection of Supplies – Fixed Price AUG 1996 52.246-4 Inspection of Services-Fixed Price AUG 1996 52.246-16 Responsibility for Supplies APR 1984

12 Bureau of Engraving and Printing 2031ZA21Q00207

SECTION F – DELIVERY OR PERFORMANCE

1.0 Period of Performance: The Period of Performance reads as follows:

Ordering Period 1: 1 October 2021 to 30 September 2022 Ordering Period 2: 1 October 2022 to 30 September 2023 Ordering Period 3: 1 October 2023 to 30 September 2024 Ordering Period 4: 1 October 2024 to 30 September 2025 Ordering Period 5: 1 October 2025 to 30 September 2026

2.0 Place of Performance:

Bureau of Engraving and Printing Washington, DC Currency Facility 14th and C Streets, SW Washington, DC 20228

Note: The optician will be required to be onsite for the Day and Evening shifts from 1:00 p.m.

to 4:00 p.m. and on the Midnight shift from 10:00 p.m. to 11:30 p.m.

13 Bureau of Engraving and Printing 2031ZA21Q00207

SECTION G – CONTRACT ADMINISTRATION DATA

1.0 BPA ADMINISTRATION OFFICE.

This BPA will be administered by:

Bureau of Engraving and Printing Office of the Chief Procurement Officer 14th and C Streets, S.W.

Washington, D.C. 20228-0001

Written communication to the Contracting Officer shall make reference to the BPA and/or Call number.

2.0 DTAR 1052.201-70, Contracting Officer's Representative (COR) Appointment and

Authority (APR 2015)

(a) The COR WILL BE PROVIDED AT CONTRACT AWARD.

(b) Performance of work under this contract is subject to the technical direction of the COR identified above, or a representative designated in writing. The term “technical direction” includes, without limitation, direction to the contractor that directs or redirects the labor effort, shifts the work between work areas or locations, and/or fills in details and otherwise serves to ensure that tasks outlined in the work statement are accomplished satisfactorily.

(c) Technical direction must be within the scope of the contract specification(s)/work statement. The COR does not have authority to issue technical direction that:

(1) Constitutes a change of assignment or additional work outside the contract specification(s)/work statement;

(2) Constitutes a change as defined in the clause entitled “Changes”;

(3) In any manner causes an increase or decrease in the contract price, or the time required for contract performance;

(4) Changes any of the terms, conditions, or specification(s)/work statement of the contract;

(5) Interferes with the contractor's right to perform under the terms and conditions of the contract; or

(6) Directs, supervises or otherwise controls the actions of the Contractor's employees.

(d) Technical direction may be oral or in writing. The COR must confirm oral direction in writing within five workdays, with a copy to the Contracting Officer.

(e) The Contractor shall proceed promptly with performance resulting from the technical direction issued by the COR. If, in the opinion of the Contractor, any direction of the COR or the designated representative falls within the limitations of (c) above, the Contractor shall immediately notify the Contracting Officer no later than the beginning of the next Government work day.

(f) Failure of the Contractor and the Contracting Officer to agree that technical direction is within the scope of the contract shall be subject to the terms of the clause entitled “Disputes.”

(End of clause)

14 Bureau of Engraving and Printing 2031ZA21Q00207

3.0 DTAR 1052.232-7003, Electronic Submission of Payment Requests (APR 2015)

(a) Definitions. As used in this clause—

(1) “Payment request” means a bill, voucher, invoice, or request for contract financing payment with associated supporting documentation. The payment request must comply with the requirements identified in FAR 32.905(b), “Content of Invoices” and the applicable Payment clause included in this contract.

(b) Except as provided in paragraph (c) of this clause, the Contractor shall submit payment requests electronically using the Invoice Processing Platform (IPP). Information regarding IPP, including IPP Customer Support contact information, is available atwww.ipp.gov or any successor site.

(c) The Contractor may submit payment requests using other than IPP only when the Contracting Officer authorizes alternate procedures in writing in accordance with Treasury procedures.

(d) If alternate payment procedures are authorized, the Contractor shall include a copy of the Contracting Officer's written authorization with each payment request. (End of clause) http://www.ipp.gov/

15 Bureau of Engraving and Printing 2031ZA21Q00207

SECTION H – SPECIAL CONTRACT REQUIREMENTS

1.0 TYPE OF CONTRACT.

This is a firm, fixed price Blanket Purchase Agreement (BPA) for supplies and services.

2.0 AGENCY POLICIES REGARDING COVID-19.

Keeping the workforce virus-free is a shared responsibility of BEP employees and contractors. Public health experts agree that face coverings are an additional step to protect against COVID-19 when combined with social distancing and good hygienic practices.

Along with social distancing, wearing a mask is one of the key recommended preventive measures in limiting the spread of this virus to others, especially from infected individua ls who do not show symptoms.

All personnel entering and exiting the facilities are required to wear a facial covering (cloth or mask). Bandanas, Novelty/non-protective masks, masks with ventilation valves, or face shields are not a substitute for proper masks and are PROHIBITED from use in BEP facilities.

All personnel must wear a face covering while in common spaces:

• Hallways

• Elevators

• Restrooms

BEP will enforce proper mask usage with contractors inside the Bureau. Masks shall be worn properly.

16 Bureau of Engraving and Printing 2031ZA21Q00207

3.0 COVID-19 RECOMMENDED SAFETY GUIDANCE AND PROTOCOLS.

The BEP is following all currently recommended safety guidance and protocols. This guidance includes actions individuals must take:

• DO NOT come to work if sick or feel unwell in any way.

• Maintain social distancing of 6 feet or more whenever possible.

• Wear masks and face coverings onsite! It is mandatory when social distancing cannot be maintained.

• Limit movement within the plant to only what is necessary to delivery or pick-u items.

• Follow healthcare provider’s and CDC’s guidance regarding recovery.

Contractors awaiting results from a coronavirus test are required to remain off premises.

5.0 INTERPRETATION OF CONTRACT REQUIREMENTS.

No interpretation of any provision of this BPA, including applicable specification(s)/ work statement, shall be binding on the Government unless furnished or agreed to in writing by the Contracting Officer.

6.0 NOTICE TO THE GOVERNMENT OF DELAYS.

In the event the Contractor encounters difficulty in meeting performance requirements, or when it anticipates difficulty in complying with the contract delivery schedule or date, or whenever the Contractor has knowledge that any actual or potential situation is delaying or threatens to delay the timely performance of this contract, the Contractor shall immediately notify the CO and the COR, in writing, giving pertinent details, provided, however, that this data shall be informational only in character and that this provision shall not be construed as a waiver by BEP of any delivery schedule or date or of any rights or remedies provided by law or under this BPA.

7.0 DISCLOSURE OF CONFLICTS OF INTEREST.

It is the BEP policy to award contracts to only those offerors whose objectivity is not impaired because of any related past, present, or planned interest, financial or otherwise, in organizations regulated by BEP or in organizations whose interests may be substantially affected by Departmental activities. Based on this policy, if at any time during the performance of this contract the Contractor knows of any Conflict of Interest

17 Bureau of Engraving and Printing 2031ZA21Q00207 situation affecting the organization, any of its officers or Key Persons working under this contract, has reason to believe that a conflict of interest situation might arise, or is made aware of an actual or potential conflict of interest situation:

• The Contractor shall immediately provide to the Contracting Officer a written statement which describes in a concise manner all past, present or planned organizational, financial, contractual or other interest(s) with that organization regulated by BEP, or with that organization or individual whose interests may be substantially affected by Departmental activities, and which is related to the work under this contract. The interest(s) described shall include those of the Contractor, its affiliates, consultants, Subcontractors and key personnel of any of the above. Past interest shall be limited to within one year of the date of the offeror's technical response. Key personnel shall include any person owning more than 20% interest in the organization, and the organization's corporate officers, its senior managers and any employee who is responsible for making a decision or taking an action on this contract where the decision or action can have an economic or other impact on the interests of a regulated or affected organization.

• The Contractor shall describe in detail when it became aware of the actual or potential conflict of interest, what action the organization has taken or proposes to take to mitigate and/or rectify the situation, and why it believes, in light of the interest(s) identified above, that performance of the contract can still be accomplished in an impartial and objective manner.

• In the absence of any relevant interest identified above, the Contractor shall certify in its statement that to its best knowledge and belief no affiliation exists relevant to possible conflicts of interest. The Contractor must obtain the same information from any potential Subcontractors prior to award of a subcontract.

• The Contracting Officer will review the statement submitted and may require additional relevant information from the Contractor. All such information, and any other relevant information known to BEP, will be used to determine whether a conflict of interest exists or a situation exists that may create a conflict of interest. If any such conflict of interest is found to exist, the Contracting Officer may (1) terminate the contract, or (2) determine that it is otherwise in the best interest of the United States to continue the contract with the Contractor and (3) modify the contract to include appropriate provisions to mitigate or avoid such conflicts in the contract.

• If the Contractor refuses to provide the written statement called for in this section, or any additional information that the Contracting Officer may require, the Contracting Officer may terminate the Contract for convenience if he or she deems that termination is in the best interest of the Government.

18 Bureau of Engraving and Printing 2031ZA21Q00207

SECTION I – CONTRACT CLAUSES

FAR CLAUSE 52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available.

Also, the full text of a clause may be assessed electronically at this/these address:

www.acquisition.gov (End of Clause)

CLAUSE NUMBER TITLE DATE

52.203-17 Contractor Employee Whistleblower Rights and Requirement To

Inform Employees Of Whistleblower Rights

JUN 2020

52.204-12 Unique Entity Identifier Maintenance OCT 2016 52.204-13 System For Award Management Maintenance OCT 2016 52.204-18 Commercial and Government Entity Code Maintenance AUG 2020 52.204-19 Incorporation by Reference of Representations and Certifications DEC 2014 52.212-4 Contract Terms and Conditions – Commercial Items OCT 2018 52.232-39 Unenforceability of Unauthorized Obligations JUN 2013

FAR 52.204-1, Approval of Contract (DEC 1989) This contract is subject to the written approval of the BEP Contracting Officer and shall not be binding until so approved. (End of Clause)

FAR 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items (JUL 2021)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (JUL 2018) (Section 1634 of Pub. L. 115-91).

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (AUG 2020) (Section 889(a)(1)(A) of Pub. L. 115-232).

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (NOV 2015).

(5) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).

(6) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws

108-77 and 108-78 ( 19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the

Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

XX (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (JUNE 2020), with Alternate I (OCT 1995) (41 U.S.C. 4704 and 10 U.S.C. 2402).

http://www.acquisition.gov/ https://www.acquisition.gov/far/part-52#FAR_52_203_19 https://www.acquisition.gov/far/part-52#FAR_52_204_23 https://www.acquisition.gov/far/part-52#FAR_52_204_25 https://www.acquisition.gov/far/part-52#FAR_52_209_10 https://www.acquisition.gov/far/part-52#FAR_52_233_3 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_233_4 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_203_6 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3

19 Bureau of Engraving and Printing 2031ZA21Q00207

__ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (JUN 2020) (41 U.S.C. 3509)).

__ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (JUN 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

__ (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (JUN 2020) (Pub. L. 109-282) ( 31 U.S.C. 6101 note).

__ (5) [Reserved].

XX (6) 52.204-14, Service Contract Reporting Requirements (OCT 2016) (Pub. L. 111-

117, section 743 of Div. C).

__ (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery

Contracts (OCT 2016) (Pub. L. 111-117, section 743 of Div. C).

XX (8) 52.209-6, Protecting the Government’s Interest When Subcontracting with

Contractors Debarred, Suspended, or Proposed for Debarment. (JUN 2020) (31 U.S.C. 6101 note).

__ (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility

Matters (OCT 2018) (41 U.S.C. 2313).

__ (10) [Reserved].

__ (11)

(i) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (MAR

2020) (15 U.S.C. 657a).

__ (ii) Alternate I (MAR 2020) of 52.219-3.

__ (12)

(i) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business

Concerns (MAR 2020) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

__ (ii) Alternate I (MAR 2020) of 52.219-4.

__ (13) [Reserved]

XX (14)

(i) 52.219-6, Notice of Total Small Business Set-Aside (NOV 2020) (15 U.S.C. 644).

__ (ii) Alternate I (MAR 2020) of 52.219-6.

__ (15)

(i) 52.219-7, Notice of Partial Small Business Set-Aside (NOV 2020) (15 U.S.C. 644).

__ (ii) Alternate I (MAR 2020) of 52.219-7.

__ (16) 52.219-8, Utilization of Small Business Concerns (OCT

2018) (15 U.S.C. 637(d)(2) and (3)).

__ (17)

(i) 52.219-9, Small Business Subcontracting Plan (JUN 2020) (15 U.S.C. 637(d)(4)).

__ (ii) Alternate I (NOV 2016) of 52.219-9.

__ (iii) Alternate II (NOV 2016) of 52.219-9.

__ (iv) Alternate III (JUN 2020) of 52.219-9.

__ (v) Alternate IV (JUN 2020) of 52.219-9 __ (18)

(i) 52.219-13, Notice of Set-Aside of Orders (MAR 2020) (15 U.S.C. 644(r)).

__ (ii) Alternate I (MAR 2020) of 52.219-13.

__ (19) 52.219-14, Limitations on Subcontracting (MAR 2020) (15 U.S.C. 637(a)(14)).

__ (20) 52.219-16, Liquidated Damages-Subcontracting Plan (JAN

1999) (15 U.S.C. 637(d)(4)(F)(i)).

https://www.acquisition.gov/far/part-52#FAR_52_203_13 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_203_15 https://www.acquisition.gov/far/part-52#FAR_52_204_10 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title31-section6101&num=0&edition=prelim https://www.acquisition.gov/far/part-52#FAR_52_204_14 https://www.acquisition.gov/far/part-52#FAR_52_204_15 https://www.acquisition.gov/far/part-52#FAR_52_209_6 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title31-section6101&num=0&edition=prelim https://www.acquisition.gov/far/part-52#FAR_52_209_9 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title41-section2313&num=0&edition=prelim https://www.acquisition.gov/far/part-52#FAR_52_219_3 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title15-section637a&num=0&edition=prelim https://www.acquisition.gov/far/part-52#FAR_52_219_3 https://www.acquisition.gov/far/part-52#FAR_52_219_4 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_219_4 https://www.acquisition.gov/far/part-52#FAR_52_219_6 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_219_6 https://www.acquisition.gov/far/part-52#FAR_52_219_7 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_219_7 https://www.acquisition.gov/far/part-52#FAR_52_219_8 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_219_9 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_219_9 https://www.acquisition.gov/far/part-52#FAR_52_219_9 https://www.acquisition.gov/far/part-52#FAR_52_219_9 https://www.acquisition.gov/far/part-52#FAR_52_219_9 https://www.acquisition.gov/far/part-52#FAR_52_219_13 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_219_13 https://www.acquisition.gov/far/part-52#FAR_52_219_14 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_219_16

20 Bureau of Engraving and Printing 2031ZA21Q00207

__ (21) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set- Aside (MAR 2020) (15 U.S.C. 657f).

__ (22)

(i) 52.219-28, Post Award Small Business Program Rerepresentation (NOV

2020) (15 U.S.C. 632(a)(2)).

__ (ii) Alternate I (MAR 2020) of 52.219-28.

__ (23) 52.219-29, Notice of Set-Aside for, or Sole Source Award to, Economically

Disadvantaged Women-Owned Small Business Concerns (MAR 2020) (15 U.S.C. 637(m)).

__ (24) 52.219-30, Notice of Set-Aside for, or Sole Source Award to, Women-Owned

Small Business Concerns Eligible Under the Women-Owned Small Business Program (Mar2020) (15 U.S.C. 637(m)).

__ (25) 52.219-32, Orders Issued Directly Under Small Business Reserves (MAR 2020) (15 U.S.C. 644(r)).

__ (26) 52.219-33, Nonmanufacturer Rule (MAR 2020) (15U.S.C. 637(a)(17)).

__ (27) 52.222-3, Convict Labor (JUN 2003) (E.O.11755).

__ (28) 52.222-19, Child Labor-Cooperation with Authorities and

Remedies (JAN2020) (E.O.13126).

XX (29) 52.222-21, Prohibition of Segregated Facilities (APR 2015).

XX (30)

(i) 52.222-26, Equal Opportunity (SEP 2016) (E.O.11246).

__ (ii) Alternate I (FEB 1999) of 52.222-26.

__ (31)

(i) 52.222-35, Equal Opportunity for Veterans (JUN 2020) (38 U.S.C. 4212).

__ (ii) Alternate I (JUL 2014) of 52.222-35.

XX (32)

(i) 52.222-36, Equal Opportunity for Workers with Disabilities (JUN 2020) (29 U.S.C. 793).

__ (ii) Alternate I (JUL 2014) of 52.222-36.

__ (33) 52.222-37, Employment Reports on Veterans (JUN 2020) (38 U.S.C. 4212).

__ (34) 52.222-40, Notification of Employee Rights Under the National Labor Relations

Act (DEC 2010) (E.O. 13496).

XX (35)

(i) 52.222-50, Combating Trafficking in Persons (OCT 2020) (22 U.S.C. chapter 78 and E.O.

13627).

__ (ii) Alternate I (MAR 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

__ (36) 52.222-54, Employment Eligibility Verification (OCT 2015). (Executive Order

12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in 22.1803.)

__ (37)

(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA–Designated Items

(May 2008) ( 42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

__ (ii) Alternate I (MAY 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

__ (38) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (Jun 2016) (E.O. 13693).

__ (39) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (JUN 2016) (E.O. 13693).

__ (40) https://www.acquisition.gov/far/part-52#FAR_52_219_27 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_219_28 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_219_28 https://www.acquisition.gov/far/part-52#FAR_52_219_29 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_219_30 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_219_32 https://www.govinfo.gov/content/pkg/USCODE-2018-title15/html/USCODE-2018-title15-chap14A-sec644.htm https://www.acquisition.gov/far/part-52#FAR_52_219_33 https://www.govinfo.gov/content/pkg/USCODE-2018-title15/html/USCODE-2018-title15-chap14A-sec637.htm https://www.acquisition.gov/far/part-52#FAR_52_222_3 https://www.acquisition.gov/far/part-52#FAR_52_222_19 https://www.acquisition.gov/far/part-52#FAR_52_222_21 https://www.acquisition.gov/far/part-52#FAR_52_222_26 https://www.acquisition.gov/far/part-52#FAR_52_222_26 https://www.acquisition.gov/far/part-52#FAR_52_222_35 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title38-section4212&num=0&edition=prelim https://www.acquisition.gov/far/part-52#FAR_52_222_35 https://www.acquisition.gov/far/part-52#FAR_52_222_36 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title29-section793&num=0&edition=prelim https://www.acquisition.gov/far/part-52#FAR_52_222_36 https://www.acquisition.gov/far/part-52#FAR_52_222_37 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title38-section4212&num=0&edition=prelim https://www.acquisition.gov/far/part-52#FAR_52_222_40 https://www.acquisition.gov/far/part-52#FAR_52_222_50 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_222_50 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_222_54 https://www.acquisition.gov/far/part-22#FAR_22_1803 https://www.acquisition.gov/far/part-52#FAR_52_223_9 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_223_9 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_223_11 https://www.acquisition.gov/far/part-52#FAR_52_223_12

21 Bureau of Engraving and Printing 2031ZA21Q00207

(i) 52.223-13, Acquisition of EPEAT®-Registered Imaging Equipment (JUN 2014) (E.O.s 13423 and 13514).

__ (ii) Alternate I (OCT 2015) of 52.223-13.

__ (41)

(i) 52.223-14, Acquisition of EPEAT®-Registered Televisions (JUN 2014) (E.O.s 13423 and

13514).

__ (ii) Alternate I (Jun2014) of 52.223-14.

__ (42) 52.223-15, Energy Efficiency in Energy-Consuming Products (MAY

2020) (42 U.S.C. 8259b).

__ (43)

(i) 52.223-16, Acquisition of EPEAT®-Registered Personal Computer Products (OCT

2015) (E.O.s 13423 and 13514).

__ (ii) Alternate I (JUN 2014) of 52.223-16.

XX (44) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While

Driving (JUN 2020) (E.O. 13513).

__ (45) 52.223-20, Aerosols (JUN 2016) (E.O. 13693).

__ (46) 52.223-21, Foams (Jun2016) (E.O. 13693).

__ (47)

(i) 52.224-3 Privacy Training (JAN 2017) (5 U.S.C. 552 a).

__ (ii) Alternate I (JAN 2017) of 52.224-3.

XX (48) 52.225-1, Buy American-Supplies (JAN2021) (41 U.S.C. chapter 83).

__ (49)

(i) 52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act

(JAN 2021)(41 U.S.C.chapter83, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, Pub. L. 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109- 283, 110-138, 112-41, 112-42, and 112-43.

__ (ii) Alternate I (JAN 2021) of 52.225-3.

__ (iii) Alternate II (JAN 2021) of 52.225-3.

__ (iv) Alternate III (JAN 2021) of 52.225-3.

__ (50) 52.225-5, Trade Agreements (OCT 2019) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

XX (51) 52.225-13, Restrictions on Certain Foreign Purchases (FEB 2021) (E.O.’s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

__ (52) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302Note).

__ (53) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov2007) (42 U.S.C. 5150).

__ (54) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov2007) (42 U.S.C. 5150).

__ (55) 52.229-12, Tax on Certain Foreign Procurements (FEB 2021) .

__ (56) 52.232-29, Terms for Financing of Purchases of Commercial Items (FEB

2002) (41 U.S.C. 4505, 10 U.S.C. 2307(f)).

__ (57) 52.232-30, Installment Payments for Commercial Items (Jan 2017)

(41 U.S.C. 4505, 10 U.S.C. 2307(f)).

XX (58) 52.232-33, Payment by Electronic Funds Transfer-System for Award

Management (OCT2018) (31 U.S.C. 3332).

https://www.acquisition.gov/far/part-52#FAR_52_223_13 https://www.acquisition.gov/far/part-52#FAR_52_223_13 https://www.acquisition.gov/far/part-52#FAR_52_223_14 https://www.acquisition.gov/far/part-52#FAR_52_223_14 https://www.acquisition.gov/far/part-52#FAR_52_223_15 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_223_16 https://www.acquisition.gov/far/part-52#FAR_52_223_16 https://www.acquisition.gov/far/part-52#FAR_52_223_18 https://www.acquisition.gov/far/part-52#FAR_52_223_20 https://www.acquisition.gov/far/part-52#FAR_52_223_21 https://www.acquisition.gov/far/part-52#FAR_52_224_3 https://www.acquisition.gov/far/part-52#FAR_52_224_3 https://www.acquisition.gov/far/part-52#FAR_52_225_1 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_225_3 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_225_3 https://www.acquisition.gov/far/part-52#FAR_52_225_3 https://www.acquisition.gov/far/part-52#FAR_52_225_3 https://www.acquisition.gov/far/part-52#FAR_52_225_5 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title19-section2501&num=0&edition=prelim http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title19-section3301&num=0&edition=prelim https://www.acquisition.gov/far/part-52#FAR_52_225_13 https://www.acquisition.gov/far/part-52#FAR_52_225_26 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_226_4 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_226_5 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_229_12 https://www.acquisition.gov/far/part-52#FAR_52_232_29 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_232_30 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_232_33 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title31-section3332&num=0&edition=prelim

22 Bureau of Engraving and Printing 2031ZA21Q00207

__ (59) 52.232-34, Payment by Electronic Funds Transfer-Other than System for Award Management (Jul 2013) (31 U.S.C. 3332).

__ (60) 52.232-36, Payment by Third Party (MAY 2014) (31 U.S.C. 3332).

__ (61) 52.239-1, Privacy or Security Safeguards (AUG 1996) (5 U.S.C. 552a).

__ (62) 52.242-5, Payments to Small Business Subcontractors (JAN

2017) (15 U.S.C. 637(d)(13)).

__ (63)

(i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (FEB 2006) ( 46

U.S.C. 55305 and 10 U.S.C. 2631).

__ (ii) Alternate I (APR 2003) of 52.247-64.

__ (iii) Alternate II (FEB 2006) of 52.247-64.

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

__ (1) 52.222-41, Service Contract Labor Standards (AUG 2018) (41 U.S.C. chapter67).

__ (2) 52.222-42, Statement of Equivalent Rates for Federal Hires (MAY

2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

__ (3) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards-Price

Adjustment (Multiple Year and Option Contracts) (AUG 2018) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

__ (4) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (May 2014) ( 29U.S.C.206 and 41 U.S.C. chapter 67).

__ (5) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (May 2014) (41 U.S.C. chapter 67).

__ (6) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-Requirements (MAY 2014) (41 U.S.C. chapter 67).

__ (7) 52.222-55, Minimum Wages Under Executive Order 13658 (NOV 2020).

__ (8) 52.222-62, Paid Sick Leave Under Executive Order 13706 (JAN 2017) (E.O.

13706).

__ (9) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (Jun

2020) (42 U.S.C. 1792).

(d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, as defined in FAR 2.101, on the date of award of this contract, and does not contain the clause at 52.215-2, Audit and Records-Negotiation.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor’s directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period…