2026-QQ-692_QQ_Requirements_Services_Jail_Awning.pdf
PDF 268 KB Posted
- Attached to
- Sarasota County Jail Awning Replacement
- Solicitation number
- 2026-QQ-692
- Issued by
- Sarasota County, Florida
About this file
This is a Quick Quote Requirements document issued by Sarasota County, Florida for the provision and installation of an exterior awning at the Sarasota County Jail located at 2020 Main Street, Sarasota, Florida. The project requires vendors to design and install an awning with specific dimensions of 28 feet 3 inches in overall width and 12 feet in projection. The awning frame shall be constructed of all-welded, mill-finished aluminum tubing with structural support including one existing post and one new 2 inch by 2 inch by 1/8 inch aluminum tubing support pole at the north end. The fabric cover must be durable, exterior-grade material in Sherwin Williams SW 6195 color or closest match, designed to be tied on for easy removal during severe weather. The awning shall include white 7-inch block lettering reading "Entrance" with an 11-foot clearance notation on the side panel and "Sheriff" on the front panel. Bidders must provide a minimum of two references demonstrating similar experience, submit all responses electronically through OpenGov Procurement, and the County reserves the right to request clarifications or additional information from any offeror.
Pricing shall be based on actual costs with no markup allowed on permitting fees, and the contractor is responsible for determining permit requirements and obtaining all necessary permits prior to commencing work. The contractor must schedule work to minimize interruption to daily jail operations and is liable for any damage to County or third-party property. All materials provided shall be warranted for one year or the standard manufacturer warranty period, whichever is greater. A contingency allowance of up to 10 percent of the total bid price may be permitted for unforeseen circumstances subject to written County approval. Payment shall be made upon completion of work, with invoicing and payment procedures outlined in the General Terms and Conditions of Purchase Orders. The contractor must provide a Certificate of Insurance meeting specified requirements, and work shall commence within a designated timeframe after receipt of the County Purchase Order and be completed within the County's specified duration, with the County retaining the right to modify the schedule at its discretion.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
QUICK QUOTE REQUIREMENTS (SERVICES)
Quick Quote Requirements – Services Revised 09/13/23 Page 1 of 4
1. SCOPE REQUIREMENTS
A. Sarasota County Facilities requires a vendor to provide and install an awning on the exterior of the Sarasota County Jail, located at 2020 Main St., Sarasota, FL.
i. Pictures 1 & 2 provide a general overview of the designated location for the awning installation.
ii. Picture 3 highlights the position of the support pole, which will be used for one corner of the awning.
iii. Picture 4 identifies the free-standing end of the awning.
B. Permit Requirements
i. Contractor is responsible for determining if a permit is required.
ii. Contractor shall be responsible for any and all permitting and must send a copy of the permit to the County’s project manager, as listed on the County’s purchase order, prior to commencing work.
iii. The County will set a permit allowance in OpenGov. Contractor shall charge the County for the cost of the actual permit on their invoice and shall include a copy of the receipt from the permitting authority that clearly shows the cost paid by Contractor for the permit. The County shall only pay the amount listed on the receipt from the permitting authority. No percentage markup is allowed.
C. Awning Dimensions & Configuration
i. Overall width: 28’3”
ii. Projection: 12’
iii. Sign band height: 8’
D. Frame Construction
i. Frame to be constructed of all welded, mill-finished aluminum tubing.
ii. Frame shall be securely fastened to the building wall.
iii. Structural support shall include:
iv. One (1) existing post, and
v. One (1) new 2” x 2” x 1/8” aluminum tubing support located at the north end, extending from the top front edge of the awning back to the building wall
E. Fabric Cover
i. Awning cover to be constructed of durable exterior-grade fabric suitable for outdoor use
Quick Quote Requirements – Services Revised 09/13/23 Page 2 of 4
ii. Fabric shall be designed to be tied on, allowing for easy removal in the event of severe weather and/or storm conditions.
iii. Fabric color should be Sherwin Williams SW 6195 or the closest available color match.
F. Graphics & Lettering
i. Side Panel Lettering:
ii. White 7in. block letters reading: “Entrance” and include a notation indicating an 11ft. clearance.
iii. Front Panel Lettering:
iv. White 7in. block letters reading: “Sheriff”
G. Installation
i. Awning should be installed at a plumb level and securely anchored in accordance with standard industry practices and applicable local codes.
ii. Contractor shall verify existing conditions prior to fabrication and installation.
2. EXPERIENCE Not Applicable if checked
A. Bidder must provide a minimum of 2 references demonstrating experience providing services similar to those described in this Bid. All references must be provided using the reference form provided in OpenGov Procurement.
B. Only references provided at time of submittal, using the reference form provided, will be used to verify required experience.
C. Failure to provide required references at time of submittal may result in
Bidder being declared non-responsive.
D. Failure of references to verify required experience may result in Bidder being declared non-responsible.
3. LICENSES/CERTIFICATIONS Not Applicable if checked
Bidder must have the licenses and/or certifications listed below. All required licenses and certifications must be active at the time of bid submittal and must remain active throughout the course of work.
Required Licenses:
Required Certifications:
Failure to provide a copy of all required licenses and certifications at time of submittal may result in the Bidder being declared non-responsive.
Quick Quote Requirements – Services Revised 09/13/23 Page 3 of 4
Failure to provide a copy of all required licenses and certifications within business days after request, may result in the Bidder being declared non-responsive.
4. ALTERNATES Alternate Products not acceptable if checked
A. If Bidder wishes to provide an alternate product, the Bidder shall furnish to the County the name of the manufacturer, the model number, and other identifying data and information necessary to aid the County in evaluating the alternate product. Alternates shall be approved only if determined by the County to be equivalent to the prescribed specifications.
B. To be considered, alternates must be submitted to the Contact listed in
OpenGov Procurement no later than at .
5. INSURANCE REQUIREMENTS Proof of Insurance not required if checked
Successful Bidder will be required to provide a Certificate of Insurance meeting the requirements contained in the attached Insurance Requirements.
6. PROJECT DURATION Not Applicable if checked
A. Work shall begin within days after receipt of a County Purchase
Order and shall be completed no more than days after receipt of a
County Purchase Order.
B. The County reserves the right to modify this schedule at their discretion.
Any modifications shall be communicated to the Contractor in writing.
7. BIDDER’S RESPONSIBILITIES Not Applicable if checked
A. Bidder will schedule deliveries so that there is minimal to no interruption to daily work at any location.
B. Bidder is responsible for any damage to County or third-party property caused by the Bidder or their employees. Restoration shall be made to the
County’s satisfaction.
8. GENERAL TERMS AND CONDITIONS Not Applicable if checked
Successful Bidder will be required to comply with the General Terms and
Conditions of Purchase Orders attached to this Quick Quote.
9. WARRANTY Not Applicable if checked
Unless otherwise noted in Section 1, all materials provided by the Bidder shall be fully warranted from the date of County’s acceptance for a period of one year, or for the standard warranty period provided by the Bidder or product manufacturer, whichever is greater.
10. CONTINGENCY Not Applicable if checked
Quick Quote Requirements – Services Revised 09/13/23 Page 4 of 4
If during performance of repair work, an unforeseen circumstance occurs that triggers an additional expense, a contingency of up to 10% of the total bid price may be allowed. Any use of contingency funds is subject to the written approval of the County, and any unused contingency shall not be paid out as part of any final payment.
11. INVOICING AND PAYMENT (check applicable payment method)
A. Successful Bidder(s) shall be paid:
Upon completion of work
In equal monthly installments
Upon completion of each deliverable
Other:
B. Invoicing and payment shall be as described in the General Terms and
Conditions of Purchase Orders.
12. RESERVED RIGHTS
The County reserves the right to request clarifications or additional information from any offeror.
13. QUESTIONS & ADDENDA
A. Any inquiries, suggestions, or requests concerning interpretation, clarification, or additional information pertaining to the Quick Quote shall be submitted electronically through OpenGov Procurement. All questions must be received no later than the deadline specified in the solicitation. No verbal requests for information will be honored.
B. The electronic response posted in OpenGov Procurement is the only official method whereby interpretation, clarification, or additional information will be provided. The County shall not be responsible for oral interpretations or representations made by County employees, representatives, or third parties.
File details come from the government source that posted it. Updated .