2026-10-27 RFP Diamond Peak Rental Equipment Replacement_Final.pdf
PDF 317 KB Posted
- Solicitation number
- 147761
- Issued by
- Washoe County, Nevada
About this file
This Request for Proposals (RFP) issued by the Incline Village General Improvement District (IVGID), operating as Diamond Peak Ski Resort in Nevada, seeks qualified firms to provide new rental ski and snowboard equipment for the resort. The equipment solicitation includes adult and junior skis, snowboards, ski bindings, snowboard bindings, ski boots, and snowboard boots. The estimated total quantities across all equipment types total approximately 4,463 units, with junior skis/binding systems representing 499 pairs, adult skis/binding systems 552 pairs, and snowboards ranging from 91 junior units to 208 adult units. The RFP was issued on October 27, 2026, with the deadline for proposal submission at 5:00 p.m. on November 16, 2026, through the District's PlanetBids vendor portal. Product samples must be delivered by November 16, 2026, with pickup on or after November 25, 2026. The notice of intent to award is anticipated by November 25, 2026, with Board of Trustees consideration scheduled for December 9, 2026, and agreement commencement on December 10, 2026. The selected firm must deliver the complete initial equipment order by November 1, 2027, provide a one-year warranty on materials and workmanship from the date of first use, and guarantee availability of additional equipment in the same style for three years following initial delivery.
The selected firm's quoted prices for the initial equipment order shall remain firm through delivery, with shipping and delivery charges separately itemized in the proposal. Unit prices for additional orders shall remain firm for at least one year from contract award, excluding shipping charges. Firms must comply with mandatory technical specifications including beginner-specific equipment models, integrated barcode systems, tool-free adjustments, color-coordinated sizing systems, and specific binding DIN ranges. All warranty work required during the operating season must be completed within two weeks at no cost to Diamond Peak, including materials, labor, and transportation. The District reserves the right to increase or decrease estimated quantities without changing proposed unit prices. Liquidated damages of $250 per calendar day apply for late delivery beyond the specified deadline. Proposers must provide references from at least three ski resorts supplied with comparable equipment within the past five years and must submit representative product samples at their own expense. No set-asides are specified in this solicitation.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REQUEST FOR PROPOSALS
for Diamond Peak Ski Resort
Rental Shop Ski and Snowboard Equipment
FORMAL COMPETITIVE SOLICITATION
Issue Date: October 27, 2026
DIAMOND PEAK SKI RESORT
INCLINE VILLAGE GENERAL IMPROVEMENT DISTRICT
1210 SKI WAY . INCLINE VILLAGE NV
89451
PH: (775) 832-1100 . FAX: (775) 832-1260 .
https://www.yourtahoeplace.com http://www.ivgid.org/
REQUEST FOR PROPOSALS
Rental Shop Ski and Snowboard Equipment
Diamond Peak Ski Resort
October 27, 2026
Owner Incline Village General Improvement District dba Diamond Peak Ski Resort 1210 Ski Way Incline Village, NV 89451
IVGID Procurement Office: Betsy Davis at bjd@ivgid.org or 775-886-1004
All questions concerning the requirements of this Request for Proposals must be submitted through the Q&A function on the District’s PlanetBids vendor portal.
Questions concerning access to or use of PlanetBids may be directed to the Procurement Contact identified above.
Submission Deadline
Proposals must be submitted electronically in PDF format through the District’s PlanetBids vendor portal:
https://www.planetbids.com/portal/portal.cfm?CompanyID=30437, and will be subject to the terms, conditions and scope of services herein stipulated and/or attached hereto.
Deadline for receiving proposals is 5:00 p.m., November 16, 2026. Planet Bids will automatically refuse any proposals submitted after this time.
Confidentiality: All documents and other information submitted in response to this request, without limitation, are confidential and will not be disclosed until notice of intent to award the contract is issued. The District is a public agency as defined by state law. As such, the District is subject to the Nevada Public Records Law (NRS Chapter 239). The District’s records are public records (unless declared by law to be confidential) which are subject to inspection and copying by any person.
Proposal evaluation materials will be made available in accordance with applicable law following completion of the evaluation and selection process
The District will evaluate proposals in accordance with the procedures and criteria stated in this RFP.
mailto:bjd@ivgid.org https://www.planetbids.com/portal/portal.cfm?CompanyID=30437, https://www.leg.state.nv.us/nrs/nrs-239.html https://www.leg.state.nv.us/nrs/nrs-239.html
ARTICLE 1 SERVICES DESCRIPTION AND CONTRACT TERMS
Solicitation Name: Diamond Peak Rental Shop Ski and Snowboard Equipment Replacement
1.1 General Description
The Incline Village General Improvement District (“District” or “IVGID”) doing business as Diamond Peak Ski Resort (Diamond Peak) is seeking proposals from qualified firms to provide new rental ski & snowboard equipment for use at Diamond Peak Ski Resort. This includes adult and junior skis, snowboards, ski bindings, snowboard bindings, ski boots and snowboard boots.
1.2 Contract Terms
The resulting contract will be for the selected firm to sell and deliver Diamond Peak the complete order of rental equipment no later than November 1, 2027, guarantee the availability of additional equipment in the same style for three (3) years following delivery of the initial order, subject to the additional-order pricing and minimum-order requirements stated in Section 1.3, and provide a minimum of (1) year warranty on materials and workmanship from the date of the buyer’s first use.
Prices quoted for the initial equipment order shall remain firm through delivery.
Shipping and delivery charges shall be separately itemized in the proposal and included in the total proposed price.
1.3 Additional Orders and Pricing
The District may purchase additional equipment during the three-year availability period described in Section 1.2 but does not guarantee any purchases beyond the initial awarded order.
Proposers shall identify any minimum quantities required for additional orders.
Unit prices for additional orders shall remain firm for at least one (1) year from contract award, excluding separately itemized shipping charges. Proposers shall describe the pricing that would apply to additional orders after that period and state anticipated delivery lead times.
1.4 Inspection and Acceptance
All equipment is subject to inspection by the District upon delivery and unpacking.
The selected firm shall replace any damaged, defective, or nonconforming equipment at no additional cost to the District, including return shipping and delivery of replacement equipment. Receipt of a shipment does not constitute final acceptance of the equipment.
1.5 Liquidated Damages for Late Delivery
Timely delivery of the initial equipment order is essential. The District and the selected firm acknowledge that late delivery may cause financial losses that are difficult to determine precisely.
If the selected firm fails to deliver the complete initial equipment order by the deadline specified in Section 1.2, including any extension approved by the District in writing, the selected firm shall pay the District liquidated damages of $250 for each calendar day after that deadline until the complete initial order is delivered.
This amount represents agreed compensation for delay and is not intended as a penalty.
ARTICLE 2 PROPOSAL AND SUBMISSION REQUIREMENTS
Proposals should be organized in the order listed below and must contain sufficient information for the District to evaluate the proposing firm’s ability to provide competitive pricing, industry experience, meet the technical specifications for Diamond Peak’s clientele, quality of product samples provided and provide appropriate product warranty upon purchase.
2.1 Proposal Form
Complete the Proposal Form provided in Appendix A. Incomplete proposal forms will render a submission as nonresponsive and disqualified. The proposal form includes:
• Firm Information
• Equipment Pricing (For each equipment item listed in Appendix A, the proposer shall identify the proposed manufacturer and model and provide product specifications, brochures, or other supporting documentation sufficient to demonstrate compliance with Section 2.2. Supporting documentation shall clearly identify the equipment item to which it applies.
Any proposed exceptions shall be separately identified in the Exceptions section of Appendix A.)
• References
• Acknowledgment of Technical Specifications
• Acknowledgment of Product Warranty Submission
• Acknowledgment of Product Sample Requirement
2.2 Minimum Technical Specifications
Each qualification listed below is mandatory. Failure to demonstrate compliance may result in rejection of the proposal as nonresponsive or a determination that the proposer is not responsible. Technical Specification Acknowledgement is provided in Appendix A must be signed to confirm firm can meet minimum requirements. Estimated quantities by equipment type are listed in Appendix B.
2.2.1 General
1. Proposer must be prepared to provide a training program for Diamond Peak staff on the use and application of all purchased equipment, for both adults and junior equipment.
2. All purchased equipment will not include graphics which discriminate on the basis of an individual’s race, color, religion, sex, nation origin, height weight, marital status, political belief, genetic information, disability, and/or handicap. Graphics shall not be sexual or profane in nature.
3. The proposer shall be capable of supplying the equipment types, sizes, and estimated quantities listed in Appendix B. Quantities are estimates for proposal preparation and evaluation. The District reserves the right to increase or decrease these quantities without changing the proposed unit prices. Final quantities for the initial order will be specified in the resulting agreement or purchase order.
4. Equipment will have adult and junior specific integrated skis/binding and snowboard/binding systems.
5. Ability to provide unisex and junior specific snowboard boots
6. Equipment will be provided with an integrated bar code system on the skis, ski boots, snowboards and snowboard boots.
2.2.2 Snowboard Specifications
1. All snowboards must be a symmetrical beginner specific model/type.
2. All snowboards need to include an integrated stomp pad.
2.2.3 Snowboard Binding Specifications
1. Shall include a high back binding with tool free forward lean adjustment (i.e. not step in design).
2. Shall be a disk mounted binding system
3. Shall include ratchet strap adjustment system
4. Shall include a tool-free binding adjustment with the ability to change binding size, angle and stance without the use of any tools.
5. Must include junior specific bindings.
6. Must be apart of a color coordinated sizing system with the snowboard boots.
2.2.4 Snowboard Boot Specifications
1. Include an laced inner boot
2. Include a laced outer boot
3. Include a factory integrated barcode on each pair of boots
4. The size of the boot must easily be identifiable on boot exterior
5. Metal hook eyelets on top part of the lacing on the outer boot are required.
6. Must be a part of a color coordinated sizing system with the snowboard bindings.
2.2.5 Ski Specifications
1. All Skis Shall be a beginner specific model/type
2. Barcode must physically match on both skis
3. All skis shall have a tip measurement that does not exceed 125mm
4. Shall arrive with base plate mounted on the skis
2.2.6 Ski Binding Specifications
1. Shall have the ability to adjust length by hand, no tools required.
2. Shall include both an adjustable toe and heel piece.
3. Shall include junior specific bindings. Junior bindings shall be able to be adjusted for both junior and adult size boots up to a men’s size 9 boot.
4. DIN range on adult bindings needs to go from a 3 to 10 minimum and on junior bindings needs to go from a .5 to a 4.5 minimum
5. All bindings shall be compatible with either grip walk or non-grip walk boots.
6. Forward pressure indicator needs to be easily identifiable.
2.2.7 Ski Boot Specifications
1. Boot must be adult unisex and junior specific
2. All adult boots must be a 4-buckle configuration, ladder straps for the top buckle of junior boots is acceptable
3. All adult boots must be front entry
4. All boots need to have replaceable toe and heel pieces
5. All boots shall be a beginner model boot and not exceed a 100 flex rating.
6. Shall include the size of the boot easily identifiable on the boot exterior.
7. All boots will NOT include power straps upon delivery, if provided they will be removed by a company representative.
8. Shall include individual sole lengths corresponding to boot size.
2.3 Product Warranty
Proposers must provide their firm’s warranty information to be evaluated as a part of the proposal package. Product Warranty Acknowledgement is provided in Appendix A and must be signed to confirm firm has provided their warranty information.
2.3.1 General Warranty Requirements
All warranty offerings from the manufacturer shall cover the quality of labor, workmanship and materials that go into the combination of components that make up the rental equipment; skis, ski bindings, ski boots, snowboards, snowboard bindings and snowboard boots. Standard manufacturer warranty conditions and limitations are acceptable only to the extent they are consistent with the minimum coverage and service requirements in Section 2.3.2. Any proposed exceptions shall be clearly identified in the Exceptions section of Appendix A and are subject to the responsiveness review described in Section 4.1.
As a condition of product final acceptance, all warranties offered from all manufacturers shall be available in written form and be included, properly filled out, with the merchandise when delivered. All warranties shall be directly from the appropriate manufacturer of that portion of the merchandise, and not modified or backed by a subsequent manufacturer who performed work on the merchandise at a later stage in the manufacturing process
2.3.2 Additional Warranty Requirements
All equipment shall be covered for materials and workmanship for a minimum of one (1) year from the date of the Buyer’s first use.
All warranty work required during the operating season shall be completed in a time period not to exceed two (2) weeks. All warranty work stated above shall be at no cost to Diamond Peak, including materials, labor, travel time, and travel expenses and/or equipment transportation.
2.4 Product Samples
Firms are required to submit samples of its proposed product to Diamond Peak by 5:00pm November 16, 2026 with pick up on or after November 25, 2026 at a mutually agreed date and time. Product Sample Acknowledgement is provided in Appendix A and must be signed to confirm understand and has provided or will provide product samples.
1. All samples shall be submitted, delivered, and picked up at firm’s own expense.
2. The proposer shall provide one representative sample for each of the ten (10) equipment line items listed in Appendix A. Skis shall be provided as a complete pair with the proposed bindings installed. Boots and snowboard bindings shall be provided in pairs, and snowboards shall be provided individually. One representative size per line item is sufficient; samples of every size listed in Appendix B are not required. Samples shall correspond to the equipment proposed and shall be clearly labeled with the proposer’s name, manufacturer, model, and applicable Appendix A line item.
3. Delivery and pick-up of samples shall be at a mutually agreed to time and date during the period of time. Deliveries of samples must be coordinated with:
Diamond Peak Rental Manager: Brittany “Ash” Solis. Phone: 775-832-1161.
Email: bss@ivgid.org.
4. If shipped, samples shall be delivered to:
Attn. Brittany “Ash” Solis Diamond Peak Ski Resort 1210 Ski Way Incline Village, Nevada. 89451
ARTICLE 3 SOLICITATION SCHEDULE
The following dates are tentative and are subject to revision by the District:
RFP Issued October 27, 2026 RFP - Last Day for Questions November 12, 2026, 4:00 pm RFP - Last Day for Addenda November 13, 2026, 4:00 pm Product Samples Delivered No later than November 16, 2026 Proposals Due November 16, 2026, 5:00 pm Notice of Intent to Award No later than November 25, 2026 Anticipated IVGID Board of Trustees Consideration December 9, 2026 Anticipated Agreement Commencement December 10, 2026
Product Samples must be picked up on or after November 25, 2026, at a mutually agreed date and time, to be coordinated with the Diamon Peak Rental Manager.
ARTICLE 4 PROPOSAL EVALUATION AND AWARD
4.1 Responsiveness Review
The District will initially review each proposal for responsiveness to the requirements of this RFP. To be considered responsive, a proposal must include certifications, acknowledgments, cost information, and other requested materials and must not contain material exceptions to the requirements of this solicitation.
Failure to satisfy a mandatory minimum qualification or submission requirement may result in rejection of the proposal.
4.2 Responsibility Determination
The District will determine whether each responsive firm is responsible and capable of successfully fulfilling the resulting agreement. In making this determination, the District may consider the firm’s qualifications, relevant experience, references, equipment performance based on provided samples, and ability to satisfy the requirements of this RFP.
4.3 Evaluation Committee
Responsive proposals and product samples will be reviewed by an evaluation committee designated by the District to verify compliance with the solicitation requirements and determine whether the proposer can successfully fulfill the resulting agreement. The evaluation committee may include District employees, legal counsel, members of Diamond Peak’s Operational staff, or other individuals with relevant knowledge or experience.
4.4 Evaluation Criteria
The District will recommend award to the lowest responsive and responsible bidder based on the total evaluated price for the complete initial equipment order, including shipping and delivery charges. The evaluation will include verification of compliance with the technical specifications, product sample requirements, warranty requirements, and other mandatory solicitation requirements. Product samples will be evaluated for compliance with the stated specifications. Any proposed exceptions will be reviewed in accordance with Section 4.1.
4.5 References and Verification
The District may verify any information contained in a proposal, contact references, review publicly available information, and request additional information necessary to evaluate a firm’s qualifications or responsibility.
4.6 Award
Any selection or notice of intent to award is contingent upon successful negotiation of a final agreement, approval by the IVGID Board of Trustees if required, and execution of the agreement by authorized representatives of the District and the selected firm.
No proposal, selection notice, negotiation, recommendation, or Board action will create a binding agreement until the final agreement has been fully executed.
4.7 District Rights
The District reserves the right to:
• Verify information submitted by any firm
• Contact references and request additional information or clarification
• Request presentations
• Waive minor informalities or irregularities
• Reject any or all proposals
• Negotiate with one or more firms as permitted by the RFP
• Modify or cancel this solicitation
• Decline to award an agreement
• Take any other action determined to be in the District’s best interests, permitted by applicable law
ARTICLE 5 WITHDRAWAL OF PROPOSAL
The firm’s authorized representative may, prior to the date and time set as the deadline for receipt of the proposals, modify or withdraw a response via PlanetBids.
A modification or withdrawal received by IVGID’s PlanetBids website prior to 5:00 p.m. on November 16, 2026, shall be considered timely.
ARTICLE 6 UNACCEPTABLE/NON-RESPONSIVE FIRMS
Unacceptable/non-responsive proposals will be rejected by the District.
Unacceptable/non- responsive proposals are defined as proposals that do not comply with the RFP terms, conditions, and requirements.
ARTICLE 7 ANTI-LOBBYING CLAUSE
From issuance of this RFP through contract award, proposers and their officers, employees, representatives, agents, and consultants shall not communicate with District Board members, advisors, staff, or employees regarding this solicitation, except for the following permitted communications:
1. Questions concerning solicitation requirements submitted through the Q&A function on the District’s PlanetBids vendor portal.
2. Requests for administrative assistance or assistance accessing PlanetBids directed to Betsy Davis at bjd@ivgid.org or 775-886-1004.
3. Coordination of product sample delivery and pickup with Diamond Peak Rental Manager Brittany “Ash” Solis at bss@ivgid.org or 775-832-1161. These communications shall be limited to sample logistics. Questions concerning solicitation requirements shall be submitted through PlanetBids.
4. Responses to communications initiated by the District concerning proposal evaluation, clarification, or contract negotiations.
ARTICLE 8 DISQUALIFICATION OF PROPOSALS
Proposers may be disqualified and proposals may be rejected for any of, but not limited to, the following causes:
1. Lack of signature by an authorized representative on the proposal
2. Failure to properly complete the proposal
3. Evidence of collusion among firms
4. Violation of Article 7 Anti-Lobbying Clause
The District reserves the right to waive any minor informality or irregularity, or to request clarification of such minor informalities or irregularities from any or all prospective firms.
ARTICLE 9 CONFLICT OF INTEREST
No employee, officer, or agent of IVGID shall participate in the selection, or in the award or administration, of the Agreement if a conflict of interest, real or apparent, would be involved. Such a conflict arises when one of the following has a financial or other interest in any firm proposing on or selected for the award:
1. The employee, or an officer or agent of the employee
2. Any member of the employee’s immediate family
3. The employee’s business partner
4. An organization which employs, or is about to employ, any of the above
IVGID’s officers, employees, and agents shall neither solicit nor accept gratuities, favors, or anything of monetary value from firms, prospective firms, whereby the intent could reasonably be inferred as influencing the employee in the performance of his or her duties or was intended as a reward for any official act on his or her part.
Prior to entering into the Agreement, the firm is required to inform IVGID of any real or apparent organizational conflict of interest. Such organizational conflict of interest exists when the nature of the work to be performed under an Agreement may, without some restriction on future activities, result in an unfair competitive advantage to the firm, or may impact the firm’s objectivity in performing the services.
ARTICLE 10 COLLUSION CLAUSE
Any evidence of agreement or collusion among firms will render the proposal of such firm void.
Advance disclosures of any information to any firm, which gives that particular firm any advantage over any other prospective firm, in advance of the opening, made or permitted by a member of IVGID or representative thereof, will operate to void all proposals of that particular proposal, solicitation, or request.
ARTICLE 11 APPENDIX
The following appendices are incorporated into and made part of this RFP:
Appendix A – Diamond Peak Rental Equipment Proposal Form
Appendix B – Estimated Equipment Count by Product Type and Size
APPENDIX A
Diamond Peak Rental Equipment Proposal Form Proposals returned on a form other than this one will not be accepted.
FIRM INFORMATION
Firm Name:
Address:
City, St, Zip:
Date Business Started:
Principal Address of Company:
Names Of Principal Officers, Members, Owners Of Concern, or Partnership
Name: Official Capacity:
Address:
Name: Official Capacity:
Address:
Name: Official Capacity:
Address:
EQUIPMENT PRICING
Description Unit Est. Qty. Unit Price Total Price
Junior skis/binding system Size 70cm to 140cm
Pair 499
Adult skis/binding system Size 150cm to 180cm
Pair 552
Junior ski boot Size 9k to 5
Pair
Unisex Adult ski boot Size 5 to 15
Pair 838
Junior Snowboards Size 80cm to 120cm
Each 91
Adult Snowboards Size 130cm to 165cm
Each 208
Junior Snowboard Boot Size 10c to 4
Pair 86
Unisex Adult Snowboard Boot Size 5 to 15
Pair 363
Junior Snowboard Bindings Pair 20
Adult Snowboard Bindings Pair 240
Shipping and Delivery* Lump Sum 1
Total Price in Numbers: $
Total Price in Words:
*Equipment unit prices shall exclude the separately itemized shipping and delivery charges. The total proposed price shall include all equipment line items plus shipping and delivery.
Exceptions (attach additional pages as necessary):
List any additional merchandise or options that may be included with this purchase at no additional cost to Diamond Peak, if any
REFERENCES
Provide references from at least three (3) ski resorts supplied with rental ski and/or snowboard equipment within the past five (5) years. The referenced purchases shall be comparable in quantity and scope to the equipment proposed under this solicitation. For each reference, provide the resort name, contact name and telephone number, a description of the equipment supplied, contract value, and delivery date.
Resort Name and Contact Information Description of Work Contract Value Date
Complete
TECHNICAL SPECIFICATIONS ACKNOWLEDGEMENT
The ability to meet each qualification listed in Section 2.2 is mandatory. Failure to demonstrate compliance may result in rejection of the proposal as nonresponsive or a determination that the proposer is not responsible. By signing the firm confirms ability to meet specifications and has provided proposed manufacturer and model and provide product specifications, brochures, or other supporting documentation sufficient to demonstrate compliance.
PRODUCT WARRANTY ACKNOWLEDGEMENT
Proposers must provide their firm’s warranty information to be evaluated as a part of the proposal package. Minimum warranty requirements are listed in Section 2.3. By signing the firm confirms their warranty information is included in the proposal package.
PRODUCT SAMPLES ACKNOWLEDGEMENT
By signing below, the proposer acknowledges the requirements of Section 2.4 and certifies that all required product samples were delivered to Diamond Peak by the specified sample submission deadline. The proposer agrees that samples will remain available for the required evaluation period and that delivery and pickup are at the proposer’s expense.
PROPOSAL CERTIFICATION
Signature of Bidder:
Print Name of Bidder:
Title:
Date:
Phone No. Email:
APPENDIX B
Estimated Equipment Count by Product Type and Size
Equipment Group Size / length Sizing / boot fit Quantity Skis w/ bindings Junior 70 cm 12 Skis w/ bindings Junior 80 cm 40 Skis w/ bindings Junior 90 cm 44 Skis w/ bindings Junior 100 cm 79 Skis w/ bindings Junior 110 cm 75 Skis w/ bindings Junior 120 cm 75 Skis w/ bindings Junior 130 cm 84 Skis w/ bindings Junior 140 cm 90 Skis w/ bindings Adult 150 cm 171 Skis w/ bindings Adult 155 cm 171 Skis w/ bindings Adult 160 cm 144 Skis w/ bindings Adult 165 cm 36 Skis w/ bindings Adult 170 cm 18 Skis w/ bindings Adult 175 cm 6 Skis w/ bindings Adult 180 cm 6
Ski boots Junior 9k Boot size 10 Ski boots Junior 10k Boot size 10 Ski boots Junior 11k Boot size 27 Ski boots Junior 12k Boot size 51 Ski boots Junior 13k Boot size 54 Ski boots Junior 1 Boot size 66 Ski boots Junior 2 Boot size 86 Ski boots Junior 3 Boot size 106 Ski boots Junior 4 Boot size 89 Ski boots Junior 5 Boot size 66 Ski boots Adult 5 Boot size 22 Ski boots Adult 6 Boot size 99 Ski boots Adult 7 Boot size 132 Ski boots Adult 8 Boot size 180 Ski boots Adult 9 Boot size 180 Ski boots Adult 10 Boot size 110 Ski boots Adult 11 Boot size 50 Ski boots Adult 12 Boot size 36 Ski boots Adult 13 Boot size 18 Ski boots Adult 14 Boot size 6 Ski boots Adult 15 Boot size 5
Equipment Group Size / length Sizing / boot fit Quantity Snowboards Junior 80 cm 4 Snowboards Junior 90 cm 4 Snowboards Junior 100 cm 22 Snowboards Junior 110 cm 27 Snowboards Junior 120 cm 34 Snowboards Adult 130 cm 30 Snowboards Adult 135 cm 20 Snowboards Adult 140 cm 35 Snowboards Adult 145 cm 20 Snowboards Adult 150 cm 43 Snowboards Adult 155 cm 38 Snowboards Adult 160 cm 15 Snowboards Adult 165 cm 7
Snowboard boots Junior 10c Boot size 5 Snowboard boots Junior 11c Boot size 5 Snowboard boots Junior 12c Boot size 5 Snowboard boots Junior 13c Boot size 5 Snowboard boots Junior 1 Boot size 15 Snowboard boots Junior 2 Boot size 17 Snowboard boots Junior 3 Boot size 17 Snowboard boots Junior 4 Boot size 17 Snowboard boots Adult 5 Unisex boot size 15 Snowboard boots Adult 6 Unisex boot size 20 Snowboard boots Adult 7 Unisex boot size 40 Snowboard boots Adult 8 Unisex boot size 60 Snowboard boots Adult 9 Unisex boot size 65 Snowboard boots Adult 10 Unisex boot size 70 Snowboard boots Adult 11 Unisex boot size 55 Snowboard boots Adult 12 Unisex boot size 29 Snowboard boots Adult 13 Unisex boot size 5 Snowboard boots Adult 14 Unisex boot size 2 Snowboard boots Adult 15 Unisex boot size 2
Snowboard bindings Junior X-Small 10k to 3 20 Snowboard bindings Adult Small 4 to 6 45 Snowboard bindings Adult Medium 7 to 10 130 Snowboard bindings Adult Large 11 to 15 65
| Appendix A |
| Diamond Peak Rental Equipment Proposal Form |
| APPENDIX B |
| Estimated Equipment Count by Product Type and Size |
| Firm Name: |
| Address: |
| Zip: |
| Date Business Started: |
| Principal Address of Company 1: |
| Principal Address of Company 2: |
| Name: |
| Official Capacity: |
| Address_2: |
| Name_2: |
| Official Capacity_2: |
| Address_3: |
| Name_3: |
| Official Capacity_3: |
| Address_4: |
| Unit Price499: |
| Total Price499: |
| Unit Price552: |
| Total Price552: |
| Unit Price565: |
| Total Price565: |
| Unit Price838: |
| Total Price838: |
| Unit Price91: |
| Total Price91: |
| Unit Price208: |
| Total Price208: |
| Unit Price86: |
| Total Price86: |
| Unit Price363: |
| Total Price363: |
| Unit Price20: |
| Total Price20: |
| Unit Price240: |
| Total Price240: |
| Unit Price1: |
| Total Price1: |
| Total Price in Words: |
| Exceptions attach additional pages as necessary 1: |
| Exceptions attach additional pages as necessary 2: |
| Exceptions attach additional pages as necessary 3: |
| Exceptions attach additional pages as necessary 4: |
| Exceptions attach additional pages as necessary 5: |
| additional cost to Diamond Peak if any 1: |
| additional cost to Diamond Peak if any 2: |
| additional cost to Diamond Peak if any 3: |
| additional cost to Diamond Peak if any 4: |
| Resort Name and Contact InformationRow1: |
| Description of WorkRow1: |
| Date Complete: |
| Resort Name and Contact InformationRow2: |
| Description of WorkRow2: |
| Date Complete_2: |
| Resort Name and Contact InformationRow3: |
| Description of WorkRow3: |
| Title: |
| Date: |
| Total Price in Numbers: |
| Contract Value 1: |
| Contract Value 2: |
| Date Complete_3: |
| Contract Value 3: |
| Name of Bidder: |
| Signature6_es_:signer:signature: |
| Phone Number: |
| email address: |
File details come from the government source that posted it. Updated .