1622 Dump Truck Bed Statement of Work 5 Sep 25 PDF.pdf

STATEMENT OF WORK

Kentworth T470 Dump Truck Bed Replacement

Vehicle Registration #: 16D00124

WORK ORDER NUMBER: 2025070200001

1. GENERAL INFORMATION:

Replacement of the dump bed to the 2016 Kenworth T470 Dump Truck (16D00124) is needed to ensure the vehicle is in safe and serviceable condition for use. This will include the replacement of the dump body assembly, and any additional parts found defective during the repairs. When complete the dump truck should have a fully functioning dump bed. This work will consist of supplying/furnishing all labor, materials, tools, equipment, and expenses necessary to accomplish the work described below in compliance with Air Force Technical Order 36-1-191, Air Force Instruction 24-302 and manufacturer maintenance manuals. The Air Force will provide transportation to the vendor’s facility with in 100 miles of Hanscom

AFB.

2. SCOPE: Replace Dump Body Assembly

Contractor will need to remove the old dump bed and attached parts found defective. All parts must meet OEM (Original Equipment Manufacturer) specifications to ensure the dump truck operates IAW manufacturer specifications and has original capabilities. All and any parts are to be new (renewed or refurbished parts are not authorized). Contract shall repair assemblies listed below:

a. Kenworth Model T470, Dump Body Galion Model 530T-15/Serial # B15-1490

b. The truck frame is a Kenworth brand, the dump body is fitted after production. The bed is a heavy duty Galion 180x84x44x56x50 Dump Body, Body length 15', Sides 44'', Head sheet height 56'', Tailgate 50'', Floor/side headsheet/tailgate 7GA AR 500, Long sill 7 GA 100K formed, Smooth sides, Cab shield 23''x84'', 3 coal chutes, Air operated gate, LED lights, Build per spec B15-1490, Installed on existing hydraulics, Body black, Buyers electric tarp system. The replacement does not need to be same brand but must meet all size and requirements listed.

• Replace all of the following parts:

Part No. Description Qty

Dump Body, 15’ 1 Electric Tarp Assy w/ alum. Arms & Mesh Tarp 1 Safety Side Ladder 1 Mud Flaps 2 Dump Body Up Switch 1

Back Up Alarm 1

Paint & Misc. Materials 1 3 coal chutes, installed on tailgate 1

3. GENERAL REQUIREMENTS:

Work includes, but is not limited to the following:

a. Contractor shall inspect the dump truck and dump body and build in any risks into their proposal

b. Any additional repairs that are found after removal of the dump body will need to be sent to the PCO (Project Contracting Officer) for further guidance and approval.

PCO: Eva Leavitt- eva.leavitt@us.af.mil.

c. Provide updates to Project PCO. Any repair issues, changes to schedule, or schedule slippages with justification must be reported.

d. Period of Performance 120 days after award of contract

4. INSPECTION/ACCEPTANCE

a. After the replacement of the dump bed the vehicle will need to be operated to verify that moving parts are working according to manufacturer’s specification, and that all safety devices are operational.

b. Place of Inspection and Acceptance is to be at the contractor’s facility, within the 100 mile radius of Hanscom AFB.

5. ADMINISTRATION:

Points of Contact (POC):

POC: First Last Scott Morey Phone Number. (781) 225-5840 Alternate POC: First Last Brian Johnson Phone Number. (781) 225-2523