2024_02_27 _ Starr_s Mill Tunnel 100_ Plans R.pdf
PDF 43 MB Posted
- Attached to
- #2455-B Starrs Mill School Tunnel Construction
- Solicitation number
- PE-65600-NONST-2025-000000078
- Issued by
- Douglas County, Georgia
About this file
This document is an Invitation to Bid for the construction of a multiuse tunnel under Redwine Road in Fayette County, Georgia. Fayette County is inviting contractors to submit bids for this #2455-B Starrs Mill School Tunnel Construction project. Bids will be accepted until 3:00pm on Wednesday, September 4, 2024. No other details regarding response dates, site visits, or award dates are provided.
The document does not include any information about pricing terms, set asides, incumbents, funding requirements or sources, or contract term and renewal options. Only the general project description and bid submission details are covered.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 2455_B Addendum 1.pdf | ||
| 2024_07_03 _ Starr_s Mill School Tunnel Bid T.xlsx | XLSX spreadsheet | |
| 2455_B ITB.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
LOCATION SKETCH
PROJECT LOCATION
P:
\M ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_N ot es E tc .d w g
/1
9/
:0
PM
U
SE
R
: E ric
B ris se
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER WHATSOEVER WITHOUT FIRST OBTAINING THE EXPRESS WRITTEN PERMISSION AND CONSENT OF CROY
ENGINEERING, LLC, NOR ARE THEY TO BE ASSIGNED TO ANY PARTY WITHOUT WRITTEN PERMISSION AND CONSENT.
ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_N ot es E tc .d w g
9/
/2
:5
A M
U
SE
R : E ric B ris se
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_N ot es E tc .d w g
/1
9/
:2
PM
U
SE
R
: E ric
B ris se
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_N ot es E tc .d w g
/2
5/
1:
A M
U
SE
R : E ric B ris se
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_T yp ic al s.d w g 3/
1/
1:
A M
U
SE
R : E ric B ris se
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_T yp ic al s.d w g 3/
1/
1:
A M
U
SE
R : E ric B ris se
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_T yp ic al s.d w g 9/
/2
4:
P M
U
SE
R : E ric B ris se
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_T yp ic al s.d w g 3/
1/
1:
A M
U
SE
R : E ric B ris se
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_T yp ic al s.d w g 3/
1/
1:
A M
U
SE
R : E ric B ris se
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_N ot es E tc .d w g
/1
9/
:2
PM
U
SE
R
: E ric
B ris se
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_N ot es E tc .d w g
2/
/2
2:
P
M U
SE
R
: E ric
B ris se
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_C on sL ay ou t.d w g
/1
8/
0:
A M
U
SE
R : E ric B ris se
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_C on sL ay ou t.d w g
/1
8/
0:
A M
U
SE
R : E ric B ris se
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_C on sL ay ou t.d w g
/1
8/
0:
A M
U
SE
R : E ric B ris se
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_C on sL ay ou t.d w g
/1
8/
0:
A M
U
SE
R : E ric B ris se
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_P la ns .d w g
/1
8/
0:
A M
U
SE
R : E ric B ris se
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_P la ns .d w g
/1
8/
:3
PM
U
SE
R
: E ric
B ris se
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_P la ns .d w g
/1
8/
:3
PM
U
SE
R
: E ric
B ris se
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_P la ns .d w g
/1
9/
:2
PM
U
SE
R
: E ric
B ris se
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_P ro fil es
.d w g
/2 4/
1:
A
M U
SE
R
: E ric
B ris se
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_P ro fil es
.d w g
/2 4/
1:
A
M U
SE
R
: E ric
B ris se
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_P ro fil es
.d w g
/1 8/
:4
PM
U
SE
R : E ric B ris se
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_G ra di ng
.d w g
/1 7/
:0
PM
U
SE
R : E ric B ris se
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_G ra di ng
.d w g
/1 9/
:3
PM
U
SE
R : E ric B ris se
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_G ra di ng
.d w g
/1 9/
:2
PM
U
SE
R : E ric B ris se
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_G ra di ng
.d w g
/1 9/
:3
PM
U
SE
R : E ric B ris se
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_D ra in ag e.
dw g
/1 9/
:3
PM
U
SE
R : E ric B ris se
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_S to rm .d w g
/2
4/
:4
PM
U
SE
R
: E ric
B ris se
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_S to rm .d w g
/2
4/
:4
PM
U
SE
R
: E ric
B ris se
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_U til ity .d w g
/1
8/
0:
A M
U
SE
R : E ric B ris se
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_U til ity .d w g
/1
8/
0:
A M
U
SE
R : E ric B ris se
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_U til ity .d w g
/1
9/
:3
PM
U
SE
R
: E ric
B ris se
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_U til ity .d w g
/1
9/
:3
PM
U
SE
R
: E ric
B ris se
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_U til ity .d w g
/1
9/
:3
PM
U
SE
R
: E ric
B ris se
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_S ig nM ar k.
dw g
/1 8/
:2
PM
U
SE
R : E ric B ris se
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_S ig nM ar k.
dw g
/1 9/
:3
PM
U
SE
R : E ric B ris se
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_S ig nM ar k.
dw g
/1 9/
:3
PM
U
SE
R : E ric B ris se
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_S ig nM ar k.
dw g
/1 8/
:2
PM
U
SE
R : E ric B ris se
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_W al ls .d w g
2/
/2
:4
A M
U
SE
R : E ric B ris se
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_W al ls .d w g
2/
/2
:4
A M
U
SE
R : E ric B ris se
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_W al ls .d w g
2/
/2
:4
A M
U
SE
R : E ric B ris se
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_W al ls .d w g
2/
/2
:4
A M
U
SE
R : E ric B ris se
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_W al ls .d w g
2/
/2
:4
A M
U
SE
R : E ric B ris se
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_W at er R el oc at io n.
dw g
/1 8/
:4
PM
U
SE
R : E ric B ris se
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_W at er R el oc at io n.
dw g
/1 9/
:4
PM
U
SE
R : E ric B ris se
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_W at er R el oc at io n.
dw g
/1 9/
:3
PM
U
SE
R : E ric B ris se
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_W at er R el oc at io n.
dw g
/1 9/
:4
PM
U
SE
R : E ric B ris se
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER
P:
\M ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_W at er R el oc at io n.
dw g
/1 8/
:4
PM
U
SE
R : E ric B ris se
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_E ro s- C ov er
.d w g 3/
1/
:0
PM
U
SE
R
: L al o M er ca do
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_E ro s- C ov er
.d w g
/1 9/
:0
PM
U
SE
R : E ric B ris se
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_E ro s- C ov er
.d w g 9/
/2
:3
A
M U
SE
R
: E ric
B ris se
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_E ro s- M ap s.d w g
2/
/2
4:
P
M U
SE
R
: D yl an E lli ng to n
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER
Sd2-F
Sd1-S
Sd1-S Sd1-S
Sd2-F
P:
\M ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_E ro s- Ph as e1
.d w g
/1 9/
:2
PM
U
SE
R : E ric B ris se
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER
Sd1-S Sd1-S
P:
\M ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_E ro s- Ph as e1
.d w g
/1 9/
:2
PM
U
SE
R : E ric B ris se
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER
Sd1-S Sd1-S
P:
\M ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_E ro s- Ph as e1
.d w g
/1 9/
:2
PM
U
SE
R : E ric B ris se
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_E ro s- Ph as e1
.d w g
/1 9/
:2
PM
U
SE
R : E ric B ris se
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER
Ds2 Ds1
Ds2 Ds1
Ds2 Ds1
Ds2 Ds1
Sd2-P
Sd2-F
Sd1-S
Sd1-S Sd1-S
Sd2-F
P:
\M ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_E ro s- Ph as e2
.d w g
/1 9/
:3
PM
U
SE
R : E ric B ris se
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER
Sd2-F
Sd2-F
Sd2-F
Sd2-F
Sd2-Bg
Sd2-F
Ds2 Ds1
Ds2 Ds1
Ds2 Ds1
Ds2 Ds1
Ds2 Ds1
Ds2 Ds1
Ds2 Ds1
Ds2 Ds1
Sd2-P
Sd2-P
Cd-Hb
Cd-Hb
Cd-Hb
Cd-Hb
Sd2-P
Sd1-S
Sd1-S Sd1-S
Sd2-F
Sd2-F
Ss
(ROLLED ONLY)
Ss
(ROLLED ONLY)
Ss
(ROLLED ONLY)
Ss
(ROLLED ONLY)
Ss
(ROLLED ONLY)
St
P:
\M ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_E ro s- Ph as e2
.d w g
/1 9/
:3
PM
U
SE
R : E ric B ris se
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER
Ds1
Ds2 Ds1
Sd1-S
Sd1-S Sd1-S
Ss
(ROLLED ONLY)
P:
\M ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_E ro s- Ph as e2
.d w g
/1 9/
:3
PM
U
SE
R : E ric B ris se
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER
Ds1
Sd2-F Sd2-F
Ds2 Ds1
Ds2 Ds1
Sd2-Bg Sd2-F
Cd-H b
Cd-Hb Cd-Hb Cd-Hb
Cd-Hb Cd-Hb St
Ss
(ROLLED ONLY)
Ss
(ROLLED ONLY)
P:
\M ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_E ro s- Ph as e2
.d w g
/1 9/
:3
PM
U
SE
R : E ric B ris se
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER
Ds3
Ds3 Ds3
Ds4
Ds4
Ds4
Ds4Ds4
P:
\M ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_E ro s- Ph as e3
.d w g
/1 9/
:3
PM
U
SE
R : E ric B ris se
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER
Sd2-S
Ds3 Ds3
Ds3
Ds3
Ds3
Ds3
Ds3
Ds3
Ds4 Ds4
Ds4
Ds4
Ds4
Ds4 Ds4
Ds4
Ss
(ROLLED ONLY)
Ss
(ROLLED ONLY)
Ss
(ROLLED ONLY)
Ss
(ROLLED ONLY)
Ss
(ROLLED ONLY)
St
P:
\M ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_E ro s- Ph as e3
.d w g
/1 9/
:3
PM
U
SE
R : E ric B ris se
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER
Ds4
Ds4
Ss
(ROLLED ONLY)
P:
\M ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_E ro s- Ph as e3
.d w g
/1 9/
:3
PM
U
SE
R : E ric B ris se
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER
Sd2-S
Ds3 Ds3
Sd2-S Sd2-S
St
Ss
(ROLLED ONLY)
Ss
(ROLLED ONLY)
P:
\M ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_E ro s- Ph as e3
.d w g
/1 9/
:3
PM
U
SE
R : E ric B ris se
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_E ro s- W at er sh ed
.d w g 2/
/2
:4
A
M U
SE
R
: D yl an E lli ng to n
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER
SECTION B-B
CURB INLET FILTER "PIGS IN BLANKET"
PLAN
FABRIC AND SUPPORTING FRAME FOR
STEEL FRAME AND SILT FENCE INSTALLATION
INLET PROTECTION
Sd2-S
SILT FENCE - TYPE SENSITIVE
SIDE VIEW
FRONT VIEW
Sd1-S Sd2-F
BLOCK AND GRAVEL SECTION
BLOCK AND GRAVEL DROP INLET PROTECTION
BLOCK AND GRAVEL PERSPECTIVESd2-Bg
Sd2-P
PIPE OUTLET TO WELL DEFINED CHANNEL
PIPE OUTLET TO FLAT AREA -- NO WELL DEFINED CHANNEL
RIPRAP OUTLET PROTECTIONSt INLET SEDIMENT TRAP
SOD STRIPS PROTECT INLET AREA FROM EROSION
(SOURCE: VA SWCC)
P:
\M ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_E ro s- C ov er
.d w g 2/
/2
:0
A
M U
SE
R
: L al o M er ca do
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER
N.T.S.SPECIFICATIONS
Mulching Without Seeding This standard applied to grades or cleared areas where seedings may not have a suitable growing season to produce an erosion retardant cover, but can be stabilized with a mulch cover.
Site Preparation
1. Grade to permit the use of equipment for applying and anchoring mulch.
2. Install needed erosion control measures as required such as dikes, diversions, berms, terraces and sediment barriers.
3. Loosen compact soil to a minimum depth of 3 inches.
Mulching Materials Select one of the following materials and apply at the depth indicated:
1. Dry straw or hay shall be applied at a depth of 2 to 4 inches providing complete soil coverage.
One advantage of this material is easy application.
2. Wood waste (chips, sawdust or bark) shall be applied at a depth of 2 to 3 inches. Organic material from the clearing stage of development should remain on site, be chipped, and applied as mulch.
This method of mulching can greatly reduce erosion control costs.
3. Polyethylene film shall be secured over banks or stockpiled soil material for temporary protection.
This material can be salvaged and reused.
Applying Mulch When mulch is used without seeding, mulch shall be applied to provide full coverage of the exposed area.
1. Dry straw or hay mulch and wood chips shall be applied uniformly by hand or by mechanical equipment.
2. If the area will eventually be covered with perennial vegetation, 20-30 pounds of nitrogen per acre in addition to the normal amount shall be applied to offset the uptake of nitrogen caused by the decomposition of the organic mulches.
3. Apply polyethylene film on exposed areas.
Anchoring Mulch
1. Straw or hay mulch can be pressed into the soil with a disk harrow with the disk set straight or with a special 'packer disk'. Disks may be smooth or serrated and should be 20 inches or more in diameter and 8 to 12 inches apart. The edges of the disk should be dull enough not to cut the mulch but to press it into the soil leaving much of it in an erect position. Straw or hay mulch shall be anchored immediately after application.
Straw or hay mulch spread with special blower-type equipment may be anchored. Tackifiers, binders and hydraulic mulch with tackifier specifically designed for taking straw can be substituted for emulsified asphalt. Please refer to specification Tackifiers and binders. Plastic mesh or netting with mesh no larger than one inch by one inch shall be installed according to manufacturer's specifications.
2. Netting of the appropriate size shall be used to anchor wood waste. Openings of the netting shall not be larger than the average size of the wood waste chips.
3. Polyethylene film shall be anchor trenched at the top as well as incrementally as necessary.
Ds1
N.T.S.
SPECIFICATIONS
Grading and Shaping Excessive water run-off shall be reduced by properly designed and installed erosion control practices such as closed drains, ditches, dikes, diversions, sediment barriers and others.
No shaping or grading is required if slopes can be stabilized by hand-seeded vegetation or if hydraulic seeding equipment is to be used.
Seedbed Preparation When a hydraulic seeder is used, seedbed preparation is not required. When using conventional or hand-seeding, seedbed preparation is not required if the soil material is loose and not sealed by rainfall.
When soil has been sealed by rainfall or consists of smooth cut slopes, the soil shall be pitted, trenched or otherwise scarified to provide a place for seed to lodge and germinate.
Lime and Fertilizer Agricultural lime is required unless soil tests indicate otherwise. Apply agricultural lime at determined by soil test for pH. Quick acting lime should be incorporated to modify pH during the germination period. Bio stimulants should also be considered when there is less than 3% organic matter in the soil. Graded areas require lime application. Soils must be tested to determine required amounts of fertilizer and amendments. Fertilizer should be applied before land preparation and incorporated with a disk, ripper, or chisel. On slopes too steep for, or inaccessible to equipment, fertilizer shall be hydraulically applied, preferably in the first pass with seed and some hydraulic mulch, then topped with the remaining required application rate.
Seeding Select a grass or grass-legume mixture suitable to the area and season of the year. Seed shall be applied uniformly by hand, cyclone seeder, drill, cultipacker-seeder, or hydraulic seeder (slurry including seed and fertilizer). Drill or cultipacker seeders should normally place seed one-quarter to one-half inch deep. Appropriate depth of planting is ten times the seed diameter. Soil should be "raked" lightly to cover seed with soil if seeded by hand.
See table below.
Mulching Temporary vegetation can, in most cases, be established without the use of mulch provided there is little to no erosion potential. However, the use of mulch can often accelerate and enhance germination and vegetation establishment. Mulch without seeding should be considered for short term protection. Refer to Ds1 - Disturbed Area Stabilization (With Mulching Only).
Irrigation During times of drought, water shall be applied at a rate not causing runoff and erosion.
The soil shall be thoroughly wetted to a depth that will insure germination of the seed.
Subsequent applications should be made when needed.
BROADCAST
RATES
PER
ACRE
PER
SQ. FT. J F M A M J J A S O N D
SPECIES
PLANTING DATES
FOR SOUTHERN
PIEDMONT REGION REMARKS
BARLEY
(Horduem vulgare) alone in mixture
144 lbs.
24 lbs.
14,000 seed per pound.
Winterhardy. Use on productive soils.
LESPEDEZA,ANNUAL
(Lespedeza striata) alone in mixture
3.3 lbs.
0.6 lb.
40 lbs.
10 lbs.
0.9 lb.
0.2 lb.
LOVEGRASS, WEEPING
(Horduem vulgare) alone in mixture
4 lbs.
2 lbs.
0.1 lb.
0.05 lb.
MILLET, BROWNTOP
(Panicum fascicalatum) alone in mixture
40 lbs.
10 lbs.
0.9 lb.
0.2 lb.
MILLET, PEARL
(Pennesetum glaucum) alone 50 lbs. 1.1 lb.
OATS
(Avena sativa) alone in mixture
128 lbs.
32 lbs.
2.9 lbs.
0.7 lb.
RYE
(Secale cereale) alone in mixture
168 lbs.
28 lbs.
3.9 lbs.
0.6 lb.
RYEGRASS, ANNUAL
(Lolium temulentum) alone 40 lbs. 0.9 lb.
SUDANGRASS
(Sorghum Sudanese) alone 60 lbs. 1.4 lb.
WHEAT
(Triticum Aestivum) alone in mixture
180 lbs.
30 lbs.
4.1 lbs.
0.7 lb.
200,000 seed per pound.
May volunteer for several years. Use inoculant EL.
1,500,000 seed per pound. May last for several years. Mix with Sericea lespedeza.
137,000 seed per pound.
Quick dense cover. Will provide too much competition in mixtures if seeded at high rates.
88,000 seed per pound.
Quick dense cover. May reach 5 feet in height. Not recommended for mixtures.
13,000 seed per pound.
Use on productive soils.
Not as winterhardy as rye or barley.
18,000 seed per pound.
Quick cover. Drought tolerant and winterhardy.
227,000 seed per pound.
Dense cover. Very competitive and is not to be used in mixtures.
55,000 seed per pound.
Good on droughty sites.
Not recommended for mixtures.
15,000 seed per pound.
PLANT, PLANTING RATES, AND PLANTING DATES FOR
TEMPORARY COVER OR COMPANION CROPS
J F M A M J J A S O N D
J F M A M J J A S O N D
J F M A M J J A S O N D
J F M A M J J A S O N D
J F M A M J J A S O N D
J F M A M J J A S O N D
J F M A M J J A S O N D
J F M A M J J A S O N D
J F M A M J J A S O N D
J F M A M J J A S O N D
Ds2 N.T.S.
BROADCAST
RATES
PER
ACRE
PER
SQ. FT. J F M A M J J A S O N D
SPECIES
PLANTING DATES
FOR SOUTHERN
PIEDMONT REGION REMARKS
BAHIA, PENSACOLA
(Paspalum notatum) alone or w/ temp. cover with other perennials
60 lbs.
30 lbs.
166,000 seed per pound.
Low growing. Sod forming.
Slow to establish. Plant with a companion crop.
Will spread into bermuda pastures and lawns. Mis with Sericea lespedeza or weeping lovegrass.
BAHIA, WILMINGTON
(Paspalum notatum) alone or w/ temp. cover with other perennials
1.4 lb.
0.7 lb.
BERMUDA, COMMON
(Cynodon dactylon) alone with other perennials
10 lbs.
6 lbs.
0.2 lb.
0.1 lb.
BERMUDA, COMMON
(Cynodon dactylon) with temporary cover with other perennials
10 lbs.
6 lbs.
0.2 lb.
0.1 lb.
BERMUDA SPRIGS
(Cynodon dactylon) Coastal, Common, or Tift 44 40 cu. ft. 0.9 cu. ft.
CENTIPEDE
(Eremochloa ophiuroides) Block sod only
CROWNVETECH
(Coronilla varia) with winter annuals or cool season grasses 15 lbs. 0.3 lb.
FESCUE, TALL
(Festuca arundinacea) alone with other perennials
50 lbs.
30 lbs.
1.1 lb.
0.7 lb.
LESPEDEZA, SERICA
(Lespedeza cuneata) scarified unscarified seed-bearing hay
60 lbs.
75 lbs.
3 tons
1.4 lbs.
1.7 lbs.
138 lbs.
1,787,000 seed per pound.
Quick cover. Low growing and sod forming. Full sun.
Good for athletic fields.
Plant with winter annuals.
Plant with tall fescue.
A cubic foot contains approximately 650 sprigs. A bushel contains 1.25 cubic feet or approximately 800 sprigs.
Drought tolerant. Full sun or partial shade. Effective adjacent to concrete and in concentrated flow areas.
Irrigation is needed until fully established. Do not plant near pastures.
Winterhardy as far north as Athens and
Atlanta.
100,000 seed per pound. Dense growth.
Drought tolerant and fire resistant.
Attractive rose, pink, and white blossoms spring to late fall. Mix with 30 pounds of Tall fescue or 15 pounds or rye. Inoculate seed with M inoculant.
227,000 seed per pound. Use alone only on better sites. Not for droughty soils. Mix with perennial lespedezas or crownvetch. Apply topdressing in spring following fall plantings. Not for heavy use areas or athletic fields.
350,000 seed per pound. Widely adapted. Low maintenance. Mix with weeping lovegrass, common bermuda, bahia, or tall fescue.
Takes 2 to 3 years to become fully established. Excellent on roadbanks. Inoculate seed with
EL inoculant.
PLANT, PLANTING RATES, AND PLANTING DATES FOR PERMANENT COVER
J F M A M J J A S O N D
J F M A M J J A S O N D
J F M A M J J A S O N D
J F M A M J J A S O N D
J F M A M J J A S O N D
J F M A M J J A S O N D
J F M A M J J A S O N D
J F M A M J J A S O N D
J F M A M J J A S O N D
60 lbs.
30 lbs.
1.4 lb.
0.7 lb.
LESPEDEZA
(Lespedeza virgata DC) or (Lespedeza cuneata G. Don) scarified unscarified
60 lbs.
75 lbs.
1.4 lbs.
1.7 lbs.
300,000 seed per pound. Height of growth is 18 to 24 inches.
Advantageous in urban areas.
Spreading-type growth has bronze coloration. Mix with Weeping lovegrass, Common bermuda, bahia, tall fescue or winter annuals. Do not mix with Sericea lespedeza. Slow to develop solid stands. Inoculate seed with EL inoculate.J F M A M J J A S O N D
LESPEDEZA, SHRUB
(Lespedeza bicolor) (Lespedeza thumbergii) plants
Provide wildlife food and cover.
J F M A M J J A S O N D
LOVEGRASS, WEEPING
(Eragrostis curvula) alone with other perennials
4 lbs.
2 lbs.
0.1 lb.
0.05 lb.
1,500,000 seed per pound.
Quick cover. Drought tolerant. Grows well with Sericea lespedeza on roadbanks.J F M A M J J A S O N D
3' x 3'
PANICGRASS,
ATLANTIC COASTAL
(Panicum amarum var.
amarulum) 20 lbs. 0.5 lb.
Grows well on coastal sand dunes, borrow areas, and gravel pits. Provides winter cover for wildlife. Mix with Sericea lespedeza except on sand dunes.J F M A M J J A S O N D
REED CANARY GRASS
(Phalaris arundinacea) alone with other perennials
50 lbs.
30 lbs.
1.1 lbs.
0.7 lb.
Grows similar to tall fescue.
J F M A M J J A S O N D
SUNFLOWER, 'AZTEC'
MAXIMILLIAM
(Helianthus maximiliani) 10 lbs. 0.2 lb.
227,000 seed per pound.
Mix with weeping lovegrass or other low-growing grasses or legumes.J F M A M J J A S O N D
TYPE OF SPECIES
1. Cool season grasses First 6-12-12 1500 lbs./ac. 50-100 lbs./ac.
Second 6-12-12 1000 lbs./ac. ----- Maintenance 10-10-10 400 lbs./ac. 30 lbs./ac.
2. Cool season grasses First 6-12-12 1500 lbs./ac. 0-50 lbs./ac.
and legumes Second 0-10-10 1000 lbs./ac. -----
Maintenance 0-10-10 400 lbs./ac. -----
3. Ground covers First 10-10-10 1300 lbs./ac. ----- Second 10-10-10 1300 lbs./ac. ----- Maintenance 10-10-10 1100 lbs./ac. -----
4. Pine seedlings First 20-10-5 one 21-gram pellet -----per seedling placed in the closing hole
5. Shrub Lespedeza First 0-10-10 700 lbs./ac. ----- Maintenance 0-10-10 700 lbs./ac.
6. Temporary cover First 10-10-10 500 lbs./ac. 30 lbs./ac.
crops seeded alone
7. Warm season First 6-12-12 1500 lbs./ac. 50-100 lbs./ac.
grasses Second 6-12-12 800 lbs./ac. 50-100 lbs./ac.
Maintenance 10-10-10 400 lbs./ac. 30 lbs./ac.
8. Warm season First 6-12-12 1500 lbs./ac. 50 lbs./ac.
grasses and legumes Second 0-10-10 1000 lbs./ac.
Maintenance 0-10-10 400 lbs./ac.
FERTILIZER REQUIREMENTS
YEAR
ANALYSIS OR
EQUIVALENT
N-P-K
RATE
NITROGEN TOP
DRESSING
RATE
Common Name
Albelia Abelia grandiflora 3-4 ft. 5 ft. Also a prostrate form 2 feet high. Sun, semi-shade. Semi-evergreen.
Carolina Yellow Gelsemium low 3 ft. Vine. Yellow, trumpet-like flowers.
Jessamine sempervirens Hardy, one of best vines. Evergreen.
Native to Georgia.
Carpet Blue Ajuga reptans 2-4 in. 3 ft. Needs good drainage, partial shade. Blue or white flowers. Evergreen.
Bearberry Cotoneaster dammeri 2-4 in. 5 ft. White flowers, red fruit. Sun. Evergreen.
Cotoneaster Ground Cover Cotoneaster salicifoluis 1-2 ft. 5 ft. White flowers, red fruit. Sun. Evergreen.
Cotoneaster 'Repens' Rock Cotoneaster horizontalis 1-2 ft. 5 ft. Semi-evergreen. Sun.
Cotoneaster Virginia Creeper Parthenocissue low 3 ft. Red in fall. Vine. Deciduous. Native to quinquefolia Georgia.
Daylilly Hemerocallis spp. 2-3 ft. 2 ft. Many flower colors. Full sun. Very Hardy.
English Ivy Hedera helix low 3 ft. Shade only. Climbs.
Compacta Holly Ilex crenata 'Compacta' 3-4 ft. 5 ft. Sun, semi-shade.
Chinese Holly Ilex cornuta 'Rotunda' 3-4 ft. 5 ft. Very durable. Sun, semi-shade.
Dwarf Burford Ilex burfordii 'Nana' 5-8 ft. 8 ft.
Holly Dwarf Yaupon Ilex vomitoria 'Nana' 3-4 ft. 5 ft. Very durable, sun, semi-shade.
Holly Repandens Holly Ilex crenata 'Repandens' 2-3 ft. 5 ft. Sun, semi-shade.
Andorra Juniper Juniperus horizontalis 2-3 ft. 5 ft. Excellent for slopes. Sun.
'Plumosa' Andorra Juniperus horizontalis 1-2 ft. 5 ft. More compact than andora.
Compacta Juniper 'Plumosa compacta' Blue Chip Juniperus horizontalis 8-10 in. 4 ft.
Juniper 'Blue Chip' Blue Rug Juniperus horizontalis 4-6 in. 3 ft. Very low. Sun.
Juniper 'Wiltonii' Parsons Juniper Juniperus davurica 18-24 in. 5 ft. One of the best, good winter cover.
'Expansa' (Squamata Parsoni)
Pfitzer Juniper Juniperus chinensis 6-8 ft. 6 ft. Needs room.
'Pfitzerana'
Prince of Wales Juniperus horizontalis 8-10 in. 4 ft. Feathery appearance.
Juniper 'Prince of Wales' Sargent Juniper Juniperus chinensis 1-2 ft. 5 ft. Full sun. Needs good
'Sargentii' drainage. Good winter color.
Shore Juniper Juniperus conferta 2-3 ft. 5 ft. Emerald Sea or Blue Pacific cultivars are good.
Liriope Liriope muscari 8-10 in. 3 ft.
Creeping Liriope Liriope spicata 10-12 in. 1 ft. Spreads by runners.
Big Leaf Vinca major 12-15 in. 4 ft. Lilac flowers in spring. Semi-shade.
Periwinkle Common Vinca minor 5-6 in. 4 ft. Lavender-blue flowers in spring.
Periwinkle Semi-shade.
Cherokee Rose Rosa laevigata 2 ft. 5 ft. Rampant grower. Not for restricted spaces.
Memoria Rose Rosa weuchuriana 2 ft. 5 ft. Rampant grower.
St. Johnswort Hypericum calycenum 8-12 in. 3 ft. Semi-shade.
Anthony Waterer Spirea bumalda 3-4 ft. 5 ft. Sun.
Spirea Thunberg Spirea Spirea thinbergii 3-4 ft. 5 ft. Sun.
DURABLE SHRUBS AND GROUND COVERS FOR PERMANENT COVER
Scientific Name Mature Height
Plant Spacing Comments
Ds3
Seedbed Preparation Seedbed preparation may not be required where hydraulic seeding and fertilizing equipment is to be used (but is strongly recommended for any seeding process, when possible). When conventional seeding is to be used, seedbed preparation will be done as follows:
Broadcast Plantings
1. Tillage, at a minimum, shall adequately loosen the soil to a depth of 4 to 6 inches; alleviate compaction; incorporate lime and fertilizer; smooth and firm the soil; allow for the proper placement of seed, sprigs, or plants; and allow for the anchoring of straw or hay mulch if a disk is to be used.
2. Tillage may be done with any suitable equipment.
3. Tillage should be done on the contour where feasible.
4. On slopes too steep for the safe operation of tillage equipment, the soil surface shall be pitted or trenched across the slope with appropriate hand tools to provide two places 6 to 8 inches apart in which seed may lodge and germinate.
hydraulic seeding may also be used.
Individual Plants
5. Where individual plants are to be set, the soil shall be prepared by excavating holes, opening furrows, or dibble planting.
6. For nursery stock plants, holes shall be large enough to accommodate roots without crowding.
7. Where pine seedlings are to be planted, subsoil under the row 36 inches deep on the contour four to six months prior to planting. Subsoiling should be done when the soil is dry, preferably in August or September.
Innoculants All legume seed shall be inoculated with appropriate nitrogen-fixing bacteria. the innoculant shall be a pure culture prepared specifically for the seed species and used within the dates on the container.
A mixing medium recommended by the manufacturer shall be used to bond the innoculant to the seed. for conventional seeding, use twice the amount of innoculant recommended by the manufacturer. For hydraulic seeding, four times the amount of innoculant recommended by the manufacturer shall be used.
All inoculated seed shall be protected from the sun and high temperatures and shall be planted the same day inoculated. No inoculated seed shall remain in the hydroseeder longer than one hour.
Planting Hydraulic Seeding
Mix the seed (innoculated if needed), fertilizer, and wood cellulose or wood pulp fiber mulch with water and apply in a slurry uniformly over the area to be treated. Apply within one hour after the mixture is made.
Conventional Seeding Seeding will be done on a freshly prepared and firmed seedbed. For broadcast planting, use a culti-packer-seeder, drill, rotary seeder, other mechanical seeder, or hand seeding to distribute the seed uniformly over the area to be treated. Cover the seed lightly with 1/8 to 1/4 inch of soil for small seed and 1/2 to 1 inch for large seed when using a cultipacker or other suitable equipment.
No-Till Seeding No-till seeding is permissible into annual cover crops when planting is done following maturity of the cover crop or if the temporary cover stand is sparse enough to allow adequate growth of the permanent (perennial) species. No-till seeding shall be done with appropriate no-till seeding equipment. the seed must be uniformly distributed and planted at the proper depth.
Individual Plants Shrubs, vines and sprigs may be planted with appropriate planters or hand tools. pine trees shall be planted manually in the subsoil furrow. Each plant shall be set in a manner that will avoid crowding the roots.
Nursery stock plants shall be planted at the same depth or slightly deeper than they grew at the nursery. The tips of vines and sprigs must be at or slightly above the ground surface.
Where individual holes are dug, fertilizer shall be placed in the bottom of the hole, two inches of soil shall be added and the plant shall be set in the hole.
Mulching Mulch is required for all permanent vegetation applications. mulch applied to seeded areas shall achieve 75% to 100% soil cover. When selecting a mulch, design professionals should consider the mulch's functional longevity, vegetation establishment enhancement, and erosion control effectiveness. Select the mulching material from the following and apply as indicated:
1. Dry straw or dry hay of good quality and free of weed seeds can be used. dry straw shall be applied at the rate of 2 tons per acre. Dry hay shall be applied at a rate of 2 1/2 tons per acre.
2. Wood cellulose mulch or wood pulp fiber shall be used with hydraulic seeding. It shall be applied at the rate of 500 pounds per acre. Dry straw or dry hay shall be applied (at the rate indicated above) after hydraulic seeding.
3. One thousand pounds of wood cellulose or wood pulp fiber, which includes a tackifier, shall be used with hydraulic seeding on slopes 3/4:1 or steeper.
4. Sericea Lespedeza hay containing mature seed shall be applied at a rate of three tons per acre.
5. Pine straw or pine bark shall be applied at a thickness of 3 inches for bedding purposes. other suitable materials in sufficient quantity may be used where ornamentals or other ground covers are planted. This is NOT appropriate for seeded areas.
6. When using temporary erosion control blankets or block sod, mulch is not required.
7. Bituminous treated roving may be applied on planted areas, slopes, in ditches or dry water- ways to prevent erosion.
Bituminous treated roving shall be applied within 24 hours after an area has been planted. Application rates and materials must meet Georgia Department of Transportation specifications.
Wood cellulose and wood pulp fibers shall not contain germination or growth inhibiting factors. They shall be evenly dispersed when agitated in water. The fibers shall contain a dye to allow visual metering and aid in uniform application during seeding.
Applying Mulch Straw or hay mulch will be spread uniformly within 24 hours after seeding and/or planting the mulch may be spread by blower-type spreading equipment, other spreading equipment or by hand. Mulch shall be applied to cover 75% of the soil surface.
Wood cellulose or wood fiber mulch shall be applied uniformly with hydraulic seeding equipment.
Anchoring Mulch Anchor straw or hay mulch immediately after application by one of the following methods:
1. Hay and straw mulch shall be pressed into the soil immediately after the mulch is spread. A special “packer disk”' or disk harrow with the disks set straight may be used. The disks may be smooth or serrated and should be 20 inches or more in diameter and
2. 8 to 12 inches apart. The edges of the disks shall be dull enough to press the mulch into the ground without cutting it, leaving much of it in an erect position. Mulch shall not be plowed into the soil.
3. Synthetic tackifiers, binders or hydraulic mulch specifically designed to tack straw, shall be applied in conjunction with or immediately after the mulch is spread. Synthetic tackifiers shall be mixed and applied according to manufacturer's specifications. All tackifiers, binders or hydraulic mulch specifically designed to tack straw should be verified nontoxic through EPA 2021.0 testing. Refer to Tackifiers-Tac
4. Rye or wheat can be included with fall and winter plantings to stabilize the mulch. They shall be applied at a rate of one-quarter to one-half bushel per acre.
5. Plastic mesh or netting with mesh no larger than one inch by one inch may be needed to anchor straw or hay mulch on unstable soils and concentrated flow areas. These materials shall be installed and anchored according to manufacturer's specifications.
Bedding Material Mulch is used as a bedding material to conserve moisture and control weeds in nurseries, ornamental beds, around shrubs, and on bare areas on lawns.
Material Depth Grain Straw 4” TO 6” Grass Hay 4” TO 6” Pine Needles 3” TO 5” Wood Waste 4” TO 6”
Irrigation Irrigation will be applied at a rate that will not cause runoff.
Topdressing Topdressing will be applied on all temporary and permanent (perennial) species planted alone or in mixtures with other species. Recommended rates of application are listed in table 6-5.1.
Second Year and Maintenance Fertilization Second year fertilizer rates and maintenance fertilizer rates are listed in table 6-5.1.
Lime Maintenance Application Apply one ton of agricultural lime every 4 to 6 years or as indicated by soil tests. Soil tests can be conducted to determine more accurate requirements, if desired.
Use And Management Mow Sericea Lespedeza only after frost to ensure that the seeds are mature. mow between November and march.
Bermudagrass, Bahia grass and Tall Fescue may be mowed as desired. Maintain at least 6 inches of top growth under any use and management. Moderate use of top growth is beneficial after establishment.
Exclude traffic until the plants are well established. Because of the quail nesting season, mowing should not take place between may and September.
SOD LAYOUT AND PREPARATION
APPEARANCE OF GOOD SOD
SOD MAINTENANCE AND INSTALLATION
TYPICAL INSTALLATION GUIDELINES FOR ROLLED
EROSION CONTROL PRODUCTS (RECP)
BLANKET AND MATTING CROSS-SECTIONS
P:
\M ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_E ro s- C ov er
.d w g 2/
/2
:0
A
M U
SE
R
: L al o M er ca do
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_R ig ht o f W ay
.d w g
/1 5/
:5
PM
U
SE
R : E ric B ris se
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_R ig ht o f W ay
.d w g
/1 2/
:5
A
M U
SE
R
: E ric
B ris se
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_R ig ht o f W ay
.d w g
/1 5/
:5
PM
U
SE
R : E ric B ris se
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_R ig ht o f W ay
.d w g
/1 2/
:1
A
M U
SE
R
: E ric
B ris se
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER ar ie tta \1
Fa ye tte C ou nt y\
.0
S ta rr s M ill
S ch oo l T un ne l D es ig n\
En gi ne er in g\
D es ig n\
.0
_R ig ht o f W ay
.d w g
/1 2/
:1
A
M U
SE
R
: E ric
B ris se
THESE PLANS AND DRAWINGS ARE NOT TO BE REPRODUCED, CHANGED OR COPIED IN ANY FORM OR MANNER
| 01-Cover |
| 02-Index |
| 03-Revision Summary |
| 04-General Notes |
| 05-Typical Sections |
| 06-Summary of Quantities |
| 11-Construction Layout |
| 13-Mainline Plan |
| 15-Profiles |
| 18-Grading Plan |
| 21-Drainage Area Map |
| 22-Drainage Profiles |
| 24-Utility Plans |
| 26-Signing and Marking |
| 32-Wall Plan & Profile |
| 44-Waterline Relocation Plans |
| 50-Erosion Cover |
| 51-Erosion General Notes |
| 52-Erosion Legend |
| 53-Erosion Drainage Area Map |
| 54-Erosion Initial |
| 54-Erosion Intermediate |
| 54-Erosion Final |
| 55-Erosion Watershed Map |
| 56-Erosion Standards and Details |
| 60-Right of Way Cover |
| 60-Right of Way Plans |
File details come from the government source that posted it. Updated .