2021 Updated Evaluation Criteria Gray Dress shirts (002).docx
DOCX document 18 KB Posted
- Attached to
- CADET GRAY DRESS SHIRTS (MALE & FEMALE)
- Solicitation number
- W911SD-21-R-0046
View the file
Other files
| File | Type | Posted |
|---|---|---|
| W911SD-21-R-0046-0003 EXTENSION-AMENDMENT.pdf | ||
| W911SD-21-R-0046-0002 RFI-AMENDMENT.pdf | ||
| W911SD-21-R-0046-0001 RFI-AMENDMENT.pdf | ||
| SHIRT PICURES.docx | DOCX document | |
| ASU style Dress Shirts Grey deviation 26 Jan 2021.docx | DOCX document | |
| GL-PD 11-06 Final Mens Shirt 5-27-11word.docx | DOCX document | |
| W911SD-21-R-0046.pdf | ||
| QTY SHIRT LIST.xlsx | XLSX spreadsheet | |
| Final GL-PD 11-07 Womens Shirt Jan 27.docx | DOCX document | |
| FINAL-S-02-06A-Overblouse ASU 27 Jan 2021.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
End Item Inspection 20 Jan 2021
| Examination |
| Defect |
| Minor |
| Major |
| Component parts |
| Any component misplaced, omitted, broken or defective, distorted, tight or full, or not attached as specified Any component part not cut in accordance with specified pattern part |
Any component not specified type, size, length etc.
X
| Buttonholes |
| Any omitted, added, misplaced, ragged edges, caught in other stitching or component, not secured through proper layers of fabric, not serving intended purpose, broken stitches Not specified size or type, finished cut length not as specified, 2 or more uncut yarn per buttonhole |
X
| Stitches and Seams |
| Any seams open, puckered, distorted, pleated, wavy, twisted or irregular, not as specified, needle chew or irregular stitching, raw edge Irregular stitching or stitching not as specified, loose tension resulting in loose seams, broken stitches Skipped or runoff stitches, ends of stitching not secured Visible mend, pleat or crease Needle perforations clearly visible on outside Any part of shirt caught in an unrelated operation or stitching Stitches per inch not as specified, seam allowance more than 1/16 inch more or less than specified, gage of stitching not as specified or irregular Bartack: Omitted, misplaced, not serving intended purpose, not specified size, not secured through proper layers of fabric, loose or tight stitching, or broken stitches |
X
| Fronts |
| Spacing between two or more buttonholes not as specified. |
Two or more buttonholes out of vertical alignment or not as specified Tight or short, or front facing tight or twisted causing noticeable bulge, twist when buttoned
X
| Fronts (cont’d) |
| Front edge not as specified. Facing not smooth and flat, shows evidence of puckering, width of facing not as specified Hem type, or width not as specified |
X
| Shoulder Loops |
| Shoulder loop puckered, twisted, or distorted, not positioned as specified or attached crooked, not uniform size or shape. Not specified dimension Stay omitted or improperly positioned or not securely attached |
X
| Collar |
| Not uniform in size or shape, any point varying in size according to the purchase description. Collar twisted, not smooth, too full, short, tight causing collar to turn out. Collar points uneven in length. Collar measurements not as stated in PD. Collar opening less than specified as stated in PD when collar is buttoned. Edges of undercollar exposed beyond edge of top collar. Collar point not properly forced out Collar off center. Width of collar stand not as stated in the PD. |
X
| Sleeves |
| Tight, or excessive puckers, twisted, sleeves reversed. LONG SLEEVES: Binding: omitted, improperly positioned, puckered, twisted or distorted, not specified width or length, top of binding not stitched as specified, sides of opening uneven in length Pleat: omitted, misplaced, facing incorrect direction, or not specified size Cuff: puckered, twisted, or distorted, not uniform in size or shape, not stitched as specified SHORT SLEEVES: Hem not as specified, bartack omitted, bartack not as specificed. |
X
| Interlining |
| Bubbling, delamination, bleed through, wrinkling, puckering, twisted, pleated Any resin transfer or color change Misplaced, omitted or added where not specified |
X
| Cleanliness |
| Any spot or stain clearly noticeable, Three or more thread ends on outside not trimmed s specidied; odor affecting serviceability, any lint, dust or foreign matter not removed |
X
| Pressing |
| Some or all pressing omitted, wrinkles, creases, or pressing impressions not removed, scorched area, not presenting a finished appearance, poorly pressed |
X
| Permanent creases |
| Permanent creases omitted, mispositioned, misaligned, crooked, wavy, angled, or not positioned vertically straight Silicone bead is greater than or less than 1/16 inch Evidence of flaking, decomposition, failure to retain crease, or cracking Silicone not in crease line, excessive silicone, missing silicone, voids or not uniform application or appearance of silicone bead Staining or strike back through to face of material Silicone on unrelated part |
X
| Buttons |
| Any button misplaced, omitted, broken or defective, not attached as specified, or insecurely sewn Button not aligned with corresponding buttonhole causing gap, puckers, or tightness Not specified type, size or color Stitching not locked at end of cycle (tug at loose end of thread when accessible to determine if it will ravel) |
X
| Labels |
| Omitted, incorrect, illegible, not attached where specified |
| X |
| Packaging |
| Any shirt not packaged in accordance with the contract or purchase order |
| X |
| Workmanship |
| Distorted parts or poor workmanship, visible drill hole on outside of shirt (as worn) Any edge of any component part required to be forced out having folds more than 1/16 inch. |
X
| Bar Code |
| Omitted, not affixed to package. |
| X |
1. Defects 1 Major Defect in the sample will fail the sample and it shall be considered unacceptable to the Government.
3 Minor Defects in the sample will fail the sample and it shall be considered unacceptable to the Government.
2. Material Provided for sample is:
| White Cloth | ||
| Fiber Content: | 65% Polyester / 35% Combed Cotton (+/- 3%) | |
| Finished Weight | 7.7 Ounces per Square Yard (+/- 0.3 Oz.) |
3. The Poly/Wool fabric is not available at this time to send out to potential vendors for the required samples. The white cloth is the provided as a substitute.
File details come from the government source that posted it. Updated .