2020 CTE Equipment RFP (Final 2-25-2020) - GPS.pdf

Greenville Public Schools District REQUEST FOR PROPOSAL - 2020 Greenville High School CTE Equipment

1 | P a g e

Greenville Public Schools District (GPS) is seeking bids for CTE equipment to support the district’s Career and Techinical Education program.

Specifications are to be considered as minimums, and the general conditions, as listed, must be adhered to.

Bids are due by 1:00 pm Monday March 9, 2020 delivered in a sealed envelope/package with the wording “2020 Greenville High School CTE Equipment” clearly marked on the outside of the envelope/package addressed to:

Greenville Public Schools Attn: Rod Harrison 1414 Chase Street Greenville, MI 48838

GPS will not consider or accept a bid received after the date and time specified for bid submission. Bids will be opened publicly immediately following the close of receiving bids. Should GPS be closed for any reason, bids will be due the next business day GPS is open. The time bids are due will remain the same time specified herein.

Questions regarding the specifics of the bid should be directed to Rod Harrison via E-Mail at harrisor@gpsmi.us.

Answers will be responded to through the same means. Any questions submitted after 1pm on March 5th will not be answered.

It is the intention to award the bid once the Greenville Public Schools Board of Education approves the recommendation of award at the March 9, 2020 Board Meeting. Delivery and installation may take place prior to May 29, 2020. GPS may award this bid in part or whole. Any discounts for bulk pricing should be noted on the pricing sheets.

In compliance with MCL 380.1267, all bids shall be accompanied by a sworn and notarized statement disclosing any familial relationship that exists between the owner and any employee of the bidder and any member of the board, or the superintendent of the school district. All bids shall also be accompanied by a sworn and notarized statement disclosing whether the bidder is an Iran Linked Business in compliance with PA 517 of 2012. The Board has stated that GPS shall not accept a bid that does not include these sworn and notarized disclosure statements.

GPS reserves the right to allow only Michigan Based Businesses to bid on this advertisement. Under 1984 PA 431, MCL 18.1268, our board has elected to enforce the PA as defined.

GPS will be a place where all persons feel welcomed, have a right to be treated equitably and without prejudice, and have a responsibility to treat others the same way. GPS is an equal opportunity institution. GPS does not discriminate on the basis of race, creed, color, national origin, age, sex or physical/mental disability or veteran status in its educational programming, enrollment, employment or contracting.

2 | P a g e

GENERAL CONDITIONS

A. It shall be the bidder’s responsibility to read this entire document, review all enclosures and attachments, and comply with all requirements within.

B. For the purpose of assuring the School District of the quality of workmanship, materials, equipment, and service, the School Board will retain the right to qualify or disqualify bidders on the basis of available information covering their service and the suitability of the equipment/material bid for the project.

C. All alternate equipment/material as specified herein, or suggested by bidder, will be made by a reputable experienced manufacturer and shall conform to the specifications in order to promote efficiency in its use, reduce maintenance cost, and to assure durability for which it is intended.

D. In some cases, where manufacturer names and model numbers are indicated, alternates are not acceptable to create a base bid. However, in most cases alternates are acceptable, but subject to review by the owner. It will be incumbent upon the bidder, when bidding an alternate, to provide proper documentation that the alternates are equal to the manufacturer names and model numbers listed in the base bid. Vendors are encouraged to provide more than one bid as well as alternate bids that they feel may meet the needs of the GPS.

E. GPS reserves the right to accept or reject any or all bids; and to make awards as it considers its best interest, whether low bid or not, this excludes omitting the required affidavits. GPS may award this bid in part or whole.

F. All proposals submitted shall remain firm for a period of ninety (90) days after date of receiving bids.

G. The delivery of the product shall be coordinated with the Owner and delivery terms are fairly flexible.

Bids must include all delivery charges, and unboxing costs; disposal of all waste must also be coordinated with owner prior to delivery.

H. In the case where installation is specific; installation must be complete, and all installation costs must be included.

I. The successful bidder shall, within a reasonable time after receipt of written notice, make good any defects in material or workmanship that may develop, especially during the warranty period.

J. GPD shall not be responsible for any cost or expensed incurred by the bidder during the preparation of the bid.

K. The owner is a federally constituted government body and as such is not subject to Michigan State or Federal excise taxes.

3 | P a g e

SPECIFICATIONS

Machine Tooling

• Three (3) HurcoVM5i Machining Center Max 5. Pricing to include all accessories listed in the next section. Pricing shall also include all freight charges, shipping costs, and any un-boxing/setup costs.

• Six (6) Mini Mill EDUs. Pricing shall also include all freight charges, shipping costs, and any un-boxing/ setup costs.

• One (1) TM-2P. Pricing shall include all freight charges, shipping costs, and any un-boxing/setup costs.

• One (1) ST-15 lathe

• Thirteen (13) Additional simulators

• Six (6) New Sharp LMV-50 with 2 axis 12” x 36” Newall DRO installed and Kurt Vices

• Four (4) New Clausing 13” x 40” 8027J with Newall DRO installed

• Two (2) New Clausing 818 surface grinders with course pole chuck

• Four (4) New Dake 14” Drill presses

• Two (2) Kalamazoo S612V Belt disc combo sander with vacuum base

• One (1) Kalamazoo KS490 Belt sander

• One (1) Marvel Mark II

• One (1) Used 2010 Haas DT1 #13322

• One (1) Used 2004 Haas TM-2

Welding Technology

• Ten (10) Powerwave C300 Multi-Process Educational Ready-Pak

• Five (5) Cool Arc 40 Cooler

• Five (5) Precision TIG 225 Ready Pak W/Cart

• Three (3) Tomahawk 625 Plasma Cutter W/Hand Torch

• One (1) W-50 Tensile Tester

• Eighteen (18) Weld Test Stand Assembly including:

o Base with column 2-½” sch 40 x 37-½” o ½” – 13 x 3-½” Hex bolts with nuts o Cross pin o Lock bolt o Mast 2” sch 40 x 56” OAL o Adjustable overarm o Safety lock o Tool tray

• 40 Ton 3 Phase 208V CST-IW40-3PH208

4 | P a g e

• One (1) new Kalamazoo Industries 4” x 90” belt grinder KS490 o 4” x 90” belt o 8” serrated 70 Duro Contact Wheel o Direct drive o Spring belt tension o Versatile o Multi-position horizontal through vertical o 2 HP 1 phase or 3 HP 3 phase o Heavy duty o 24 ½” long steel reversible platen o 7200 SFPM o 18” L x 26” D x 47” H

• One (1) new Kalamazoo Industries 6” x 48” belt sander S6MS-1 o 6” x 48” belt, variable position, direct drive, 1 lever quick belt release o Cast iron frame, full OSHA safety guard, heavy duty steel stand o 3 HP motor 3450 RPM, 1 phase, 220 volt, manual switch, 3500 SFPM o Reversible platen 6 ½” x 14” o Cast iron work table 6” x 10” with ½” x 1/8” slot o Option: JIC controls o Dimensions: length 22” x width 14” xheight 56” o Wt: 230 lbs

• One (1) new Kalamazoo Industries 20” disc sander o 2 HP, 3 phase, (220/440V) or 1-1/2 HP, 1 phase (220V only) o 20” dia. Steel disc, uses PSA adhesive sanding discs, 1 included o Reversing drum switch o 1740 RPM o Tilt table with mitre gauge, tilts 45 degrees down, raises and lowers 6” o Tilte table dimensions: 27” wide x 10.5” deep, ¾” x ¼” slot in table o 528 lbs Woods/Construction

• Two (2) Industrial Saw Stop 7.5 HP, 230 V, 52’ T-glide fence & floating dust collection guard

• One (1) Industrial Mobility Base

• One (1) Freud Saw Stop Stack Dado

• One (1) Dado Zero Clearance Insert

5 | P a g e

• One (1) Standard 10” Brake Cartridge

• One (1) Powermatic PWBS-14CS Deluxe 14”, 1.5 HP 115/230v Bandsaw

• Two (2) Powermatic PM2415B 24”, 5 HP, 1-0, 230v Wood Lathe

• One (1) Powermatic 1285 3 HP, 1-0, 230v 12: Helical Head Jointer

• One (1) Powermatic WP2510 15 HP, 3-0, 230v 25” Wood Planer

• One (1) Powermatic WB-43 25 HP 43: Belt Sander

• Two (2) Powermatic PM2800B 1 HP, 115/230v 18” variable speed drill press

• 5 x 10 Laguna Smartshop 2 SUV with B&R Industrial Servo Control Package with absolution positioning encoders o 5’ x 10’ cutting area o 12 HP HSD ISO-30 ATC electrospindle (ceramic bearings), 208-230V, 3 phase (24,000 RPM) o Eight (8) position automatic tool changer (4 tool holders included) o 850 watt B&R Servos with 8 to 1 planetary gears o Manual pulse generator for convenient and accurate jogging o Adjustable pop-up pins o Tool cone holder for easy bit changing o 5’ x 10’ (phenolic) universal grid-type vacuum pod o Ready table o Six (6) independently controlled vacuum zones

X axis – helical rack-and-pinion

Y axis – dual helical rack-and-pinion

Z axis – precision ground ball screw o Programmable dust hood with –code driver retraction o E-stop o Limit switches on all axis with soft limits rigid, all-welded, structural steel frame (machine weight 3500 lbs) o 2000 IPM rapid traverse in X & Y

• One (1) SUV support kit

• Two (2) Becker SV400/1 or 10 HP rotary vane o 276 cmf open flow o 10.2” HgV max vacuum o 6.6 KL (8.9 HP) motor o Integrated relief valve and fittings

• One (1) Becker 10 HP vacuum pump 27” Hg_174CFM

6 | P a g e

• One (1) Tooling kit – SmartShop II, SUV, III o 1 – 1 ½” straight bit o 2 – ¼” down shear spiral o 2 – 3/8” down shear spiral o 1 – 90 degree v-bit o 2 – ¼” compression bits o 2 – 3/8” compression bits o 2 – ¼” ER32 collets o 2 – 3/8” ER32 collets o 1 – 10mm ER32 collet o 3 – ½” ER32 collets o 2 – 5mm drill bits

• One (1) MCNC SmartShop Maker 4x4 ATC B57 DSP, 5.5hp PDS, ISO30, vacuum table, 208-230V o 4’ x 4’ table with vacuum table o Laguna HHC ATC drive system (plug-and-play mtoro replacement):

X axis – precision helical rack and pinion

Y axis – precision helical rack and pinion

Z axis – precision ground ball screw

Dust hood

E-stop

Homing switches and soft limits on all axis

Rigid, structural steel and cast iron frame

Laguna handheld CNC control

CNC support kit – SS-M ATC, 5.5 HP PDS, A57E

• One (1) CNC support – SV400/1

• One (1) Becker SV40 o 276 cfm open flow o 10.2” HgV max vacuum o 6.6 kW (8.9 HP) motor o Integrated relief valve and fittings

• One (1) Tooling kit = SmartShop – M Series o 1 – 1 ½” straight bit o 1 – 1 ¼” down shear spiral

7 | P a g e o 1 – 3/8” down shear spiral o 1 – 90 degree v-bit o 1 – ¼” compression bit o 1 – 3/8” compression bit o 2 – ¼” ER32 collets o 2 – 3/8” ER32 collets o 1 – ½” ER32 collet o 1 – 10mm ER32 collet o 1 – 5mm brad point bit

• One (1) 48” x 48” Swift 3 HP liquid-cooled spindle o 4’ x 4’ cutting area o 3 HP liquid-cooled spindle, 208-230V o 4’ x 4’ table with vacuum-ready table

• One (1) CNC support kit – Swift SV400/1

• Becker SV40 o 276 cfm open flow o 10.2” HgV max vacuum o 6.6 kW (8.9 HP) motor o Integrated relief valve and fittings

• One (1) Tooling kit o 1 – 1 ½” straight bit o 1 – ¼” down shear spiral o 1 – 3/8” down shear spiral o 1 – 90 degree v-bit o 1 – ¼” compression bit o 1 – 3/8” compression bit o 2 – ¼” ER20 collets o 2 – 3/8” ER20 collets o 1 – 10mm ER20 collet o 1 – ½” ER20 collet o 1 – 5mm brad point

• Installation/Training

8 | P a g e

IT/CAD/Cisco

• One (1) VLS Laser Model VLS6.60

• One (1) Laser Cartridge 50, Lens Kit, Std 2.0

• One (1) Downdraft Cutting Table

• One (1) Air Assist, Cone

• Direct import software

• One touch software

• Onsite training

• A Base bid is considered to be a bid for all items in a section of the pricing sheet. Bidder is to include all items listed in their quoted sections. In order to submit any alternates, bidders must submit a base bid that consists of the items as specified in the manufacturers section of the specification.

BIDDERS RESPONSIBILITIES

Bids will be due by 1:00 pm on March 9, 2020.

Bid proposals shall include the following documentation:

• Proposal

• Familial Affidavit

• Iran Economic Sanctions Affidavit

• Warranty Information

• Additional documentation found necessary will be posted to SIGMA VSS as an addenda(s).

9 | P a g e

AFFIDAVIT OF COMPLIANCE – IRAN ECONOMIC SANCTIONS ACT

Michigan Public Act No. 517 of 2012 The undersigned, the owner or authorized officer of ___________________________________ (the “Bidder”), pursuant to the compliance certification requirement provided in the Kent Intermediate School District request for proposal for 2020 Greenville High School CTE Equipment, hereby certifies, represents and warrants that the Bidder (including its officers, directors and employees) is not an “Iran Linked Business” within the meaning of the Iran Economic Sanctions Act, Michigan Public Act No. 517 of 2012 (the “Act”), and that in the event Bidder is awarded a Contract as a result of the aforementioned Invitation To Bid, the Bidder will not become an “Iran Linked Business” at any time during the course of performing under the Contract.

The Bidder further acknowledges that any person who is found to have submitted a false certification is responsible for a civil penalty of not more than $250,000.00 or 2 times the amount of the Contract or proposed Contract for which the false certification was made, whichever is greater, the cost of the Intermediate School District’s investigation, and reasonable attorney fees, in addition to the fine. Moreover, any person who submitted a false certification shall be ineligible to bid on an Invitation To Bid for three (3) years from the date it is determined that the person has submitted the false certification.

Contractor:

By: _________________________________

Title: _________________________________

Date:________________________________

STATE OF MICHIGAN )

)ss.

COUNTY OF _______________ )

This instrument was acknowledged before me on the _____ day of ____________, 2020, by

, Notary Public

_____________________County, Michigan

My Commission Expires:________________

Acting in the County of:________________

10 | P a g e

FAMILIAL RELATIONSHIP DISCLOSURE STATEMENT

Important: This disclosure statement must be included with your bid - required by state law (P.A. 232 of 2004)

As required by Public Act 232 of 2004, all bids shall be accompanied by a sworn and notarized statement disclosing any familial relationship that exists between the owner or any employee of the bidder and any member of the School Board or the

Superintendent of Greenville Public Schools.

The undersigned, the owner or authorized officer of ___________________________________________________

(the Bidder), pursuant to the familial disclosure requirement provided in the attached invitation to bid, hereby represent and warrant, except as provided below, that no familial relationships exist between the owner(s) or any employee of the company and any member of the School Board or the Superintendent of Greenville Public Schools. If such a relationship exists, please explain:

BIDDER:_____________________________

By:_________________________________

Title:_______________________________

STATE OF MICHIGAN )

)ss.

COUNTY OF _______________ )

This instrument was acknowledged before me on the _____ day of ____________, 2020, by

, Notary Public

_____________________County, Michigan

My Commission Expires:________________

Acting in the County of:________________

11 | P a g e

Pricing Sheet Machine Tooling:

• Hurco VM5i Machining Center Max 5 o $___________Unit Cost $_____________:Quantity of 3 $__________Delivery

• 18” x 14” x 14” Travel with 8,000 RPM CAT 40 Spindle o $___________Unit Cost $_____________:Quantity of 3 $__________Delivery

• 16 Station Automatic Side Mounted Tool Changer o $___________Unit Cost $_____________: Quantity of 3 $__________Delivery

• 748 High Speed In/Min Rapids in X, Y, Z axis o $___________Unit Cost $_____________:Quantity of 3 $__________Delivery

• Hurco MAX 5 Control Conversational & G-Code Programming o $___________Unit Cost $_____________:Quantity of 3 $__________Delivery

• WinMax Classic Conversational and NC o $___________Unit Cost $_____________:Quantity of 3 $__________Delivery

• Tool Material Library o $___________Unit Cost $_____________: Quantity of 3 $__________Delivery

• DXF Software Package o $___________Unit Cost $_____________:Quantity of 3 $__________Delivery

• NC/Conversational Merge o $___________Unit Cost $_____________:Quantity of 3 $__________Delivery

• Rigid Tap Software o $___________Unit Cost $_____________:Quantity of 3 $__________Delivery

• 3D Mold/Swept Surface Software Package o $___________Unit Cost $_____________:Quantity of 3 $__________Delivery

• Unlimited Seats WinMax Desktop Offline Software o $___________Unit Cost $_____________:Quantity of 30 $__________Delivery

• Ultipocket/Helical Ramp Software Package o $___________Unit Cost $_____________:Quantity of 3 $__________Delivery

• 4 GB Ram/128 GB Solid State Hard Drive Extend Memory o $___________Unit Cost $_____________:Quantity of 3 $__________Delivery

• Mini Mill EDUs o $___________Unit Cost $_____________:Quantity of 6 $__________Delivery

• TM-2P

o $___________Unit Cost $_____________:Quantity of 1 $__________Delivery

• ST-15 Lathe o $___________Unit Cost $_____________:Quantity of 1 $__________Delivery

• Additional Simulators o $___________Unit Cost $_____________:Quantity of 13 $__________Delivery

• New Sharp LMV-50 with 2 axis 12” x 36” Newall DRO installed and Kurt Vices o $___________Unit Cost $_____________:Quantity of 6 $__________Delivery

• New Clausing 13” x 40” 8027J with Newall DRO installed o $___________Unit Cost $_____________:Quantity of 4 $__________Delivery

• New Clausing 818 surface grinders with course pole chuck o $___________Unit Cost $_____________:Quantity of 2 $__________Delivery

• New Dake 14” Drill presses o $___________Unit Cost $_____________:Quantity of 4 $__________Delivery

• Kalamazoo S612V Belt disc combo sander with vacuum base o $___________Unit Cost $_____________:Quantity of 2 $__________Delivery

12 | P a g e

• Kalamazoo KS490 Belt sander o $___________Unit Cost $_____________:Quantity of 1 $__________Delivery

• Marvel Mark II o $___________Unit Cost $_____________:Quantity of 1 $__________Delivery

• Used 2010 Haas DT1 #13322 o $___________Unit Cost $_____________:Quantity of 1 $__________Delivery

• Used 2004 Haas TM-2

Welding Technology

• Powerwave C300 Multi-Process Educational Ready-Pak o $___________Unit Cost $_____________:Quantity of 10 $__________Delivery

• Cool Arc 40 Cooler o $___________Unit Cost $_____________:Quantity of 5 $__________Delivery

• Precision TIG 225 Ready Pak W/Cart o $___________Unit Cost $_____________:Quantity of 5 $__________Delivery

• Tomahawk 625 Plasma Cutter W/Hand Torch o $___________Unit Cost $_____________:Quantity of 3 $__________Delivery

• W-50 Tensile Tester o $___________Unit Cost $_____________:Quantity of 1 $__________Delivery

• Weld Test Stand Assembly o $___________Unit Cost $_____________:Quantity of 18 $__________Delivery

• 40 Ton 3 Phase 208V CST-IW40-3PH208 o $___________Unit Cost $_____________:Quantity of 1 $__________Delivery

• Kalamazoo Industries 4” x 90” Belt Grinder KS490 o $___________Unit Cost $_____________:Quantity of 1 $__________Delivery

• Kalamazoo Industries 6” x 48” Belt Sander S6MS-1 o $___________Unit Cost $_____________:Quantity of 1 $__________Delivery

• Kalamazoo Industries 20: Disc Sander

Woods/Construction

• Industrial Saw Stop 7.5 HP, 230 V, 52’ T-glide fence & floating dust collection guard o $___________Unit Cost $_____________:Quantity of 2 $__________Delivery

• Industrial Mobility Base o $___________Unit Cost $_____________:Quantity of 1 $__________Delivery

• Freud Saw Stop Stack Dado o $___________Unit Cost $_____________:Quantity of 1 $__________Delivery

• Dado Zero Clearance Insert o $___________Unit Cost $_____________:Quantity of 1 $__________Delivery

• Standard 10” Brake Cartridge o $___________Unit Cost $_____________:Quantity of 1 $__________Delivery

• Powermatic PWBS-14CS Deluxe 14”, 1.5 HP 115/230v Bandsaw o $___________Unit Cost $_____________:Quantity of 1 $__________Delivery

• Powermatic PM2415B 24”, 5 HP, 1-0, 230v Wood Lathe o $___________Unit Cost $_____________:Quantity of 2 $__________Delivery

13 | P a g e

• Powermatic 1285 3 HP, 1-0, 230v 12: Helical Head Jointer

• Powermatic WP2510 15 HP, 3-0, 230v 25” Wood Planer o $___________Unit Cost $_____________:Quantity of 1 $__________Delivery

• Powermatic WB-43 25 HP 43 Belt Sander o $___________Unit Cost $_____________:Quantity of 1 $__________Delivery

• Powermatic PM2800B 1 HP, 115/230v 18” variable speed drill press o $___________Unit Cost $_____________:Quantity of 2 $__________Delivery

• 5 x 10 Laguna Smartshop 2 SUV with B&R Industrial Servo Control Package with absolution positioning encoders o $___________Unit Cost $_____________:Quantity of 1 $__________Delivery

• SUV support kit o $___________Unit Cost $_____________:Quantity of 1 $__________Delivery

• Becker SV400/1 or 10 HP rotary vane o $___________Unit Cost $_____________:Quantity of 2 $__________Delivery

• Becker 10 HP vacuum pump 27” Hg_174CFM o $___________Unit Cost $_____________:Quantity of 1 $__________Delivery

• Tooling kit – SmartShop II, SUV, III o $___________Unit Cost $_____________:Quantity of 1 $__________Delivery

• MCNC SmartShop Maker 4x4 ATC B57 DSP, 5.5hp PDS, ISO30, vacuum table, 208-230V o $___________Unit Cost $_____________:Quantity of 1 $__________Delivery

• CNC support – SV400/1 o $___________Unit Cost $_____________:Quantity of 1 $__________Delivery

• Becker SV40 o $___________Unit Cost $_____________:Quantity of 1 $__________Delivery

• Tooling kit = SmartShop – M Series o $___________Unit Cost $_____________:Quantity of 1 $__________Delivery

• 48” x 48” Swift 3 HP liquid-cooled spindle o $___________Unit Cost $_____________:Quantity of 1 $__________Delivery

• CNC support kit – Swift SV400/1 o $___________Unit Cost $_____________:Quantity of 1 $__________Delivery

• Becker SV40 o $___________Unit Cost $_____________:Quantity of 1 $__________Delivery

• Tooling kit o $___________Unit Cost $_____________:Quantity of 1 $__________Delivery

• Installation/Training

• VLS Laser Model VLS6.60 o $___________Unit Cost $_____________:Quantity of 1 $__________Delivery

• Laser Cartridge 50, Lens Kit, Std 2.0 o $___________Unit Cost $_____________:Quantity of 1 $__________Delivery

• Downdraft Cutting Table o $___________Unit Cost $_____________:Quantity of 1 $__________Delivery

• Air Assist, Cone o $___________Unit Cost $_____________:Quantity of 1 $__________Delivery

• Direct import software

14 | P a g e

• One touch software

• Onsite Training

Other Costs and Description:

Alternate Worksheet Please fill out the Form with the following information, the Manufacturer and the part number this item is comparable to on the base bid, and the quantity of items quoted if more than 1.

Machine Tooling:

• MFG:___________________Model:__________________Compare to:_____________________ o $______________________Unit Cost $__________________Quantity of ?__

• MFG:___________________Model:__________________Compare to:_____________________ o $______________________Unit Cost $__________________Quantity of ?__

• MFG:___________________Model:__________________Compare to:_____________________ o $______________________Unit Cost $__________________Quantity of ?__

• MFG:___________________Model:__________________Compare to:_____________________ o $______________________Unit Cost $__________________Quantity of ?__

• MFG:___________________Model:__________________Compare to:_____________________ o $______________________Unit Cost $__________________Quantity of ?__

• MFG:___________________Model:__________________Compare to:_____________________ o $______________________Unit Cost $__________________Quantity of ?__

• MFG:___________________Model:__________________Compare to:_____________________ o $______________________Unit Cost $__________________Quantity of ?__

• MFG:___________________Model:__________________Compare to:_____________________ o $______________________Unit Cost $__________________Quantity of ?__

• MFG:___________________Model:__________________Compare to:_____________________ o $______________________Unit Cost $__________________Quantity of ?__

• MFG:___________________Model:__________________Compare to:_____________________ o $______________________Unit Cost $__________________Quantity of ?__

• MFG:___________________Model:__________________Compare to:_____________________ o $______________________Unit Cost $__________________Quantity of ?__

• MFG:___________________Model:__________________Compare to:_____________________ o $______________________Unit Cost $__________________Quantity of ?__

• MFG:___________________Model:__________________Compare to:_____________________ o $______________________Unit Cost $__________________Quantity of ?__

• MFG:___________________Model:__________________Compare to:_____________________ o $______________________Unit Cost $__________________Quantity of ?__

15 | P a g e

• MFG:___________________Model:__________________Compare to:_____________________ o $______________________Unit Cost $__________________Quantity of ?__

• MFG:___________________Model:__________________Compare to:_____________________ o $______________________Unit Cost $__________________Quantity of ?__

• MFG:___________________Model:__________________Compare to:_____________________ o $______________________Unit Cost $__________________Quantity of ?__

• MFG:___________________Model:__________________Compare to:_____________________ o $______________________Unit Cost $__________________Quantity of ?__

• MFG:___________________Model:__________________Compare to:_____________________ o $______________________Unit Cost $__________________Quantity of ?__

• MFG:___________________Model:__________________Compare to:_____________________ o $______________________Unit Cost $__________________Quantity of ?__

• MFG:___________________Model:__________________Compare to:_____________________ o $______________________Unit Cost $__________________Quantity of ?__

• MFG:___________________Model:__________________Compare to:_____________________ o $______________________Unit Cost $__________________Quantity of ?__

• MFG:___________________Model:__________________Compare to:_____________________ o $______________________Unit Cost $__________________Quantity of ?__

• MFG:___________________Model:__________________Compare to:_____________________ o $______________________Unit Cost $__________________Quantity of ?__

• MFG:___________________Model:__________________Compare to:_____________________ o $______________________Unit Cost $__________________Quantity of ?__

Welding Technology o $______________________Unit Cost $__________________Quantity of ?__

• MFG:___________________Model:__________________Compare to:_____________________ o $______________________Unit Cost $__________________Quantity of ?__

• MFG:___________________Model:__________________Compare to:_____________________ o $______________________Unit Cost $__________________Quantity of ?__

• MFG:___________________Model:__________________Compare to:_____________________ o $______________________Unit Cost $__________________Quantity of ?__

• MFG:___________________Model:__________________Compare to:_____________________ o $______________________Unit Cost $__________________Quantity of ?__

• MFG:___________________Model:__________________Compare to:_____________________ o $______________________Unit Cost $__________________Quantity of ?__

Woods/Construction

16 | P a g e o $______________________Unit Cost $__________________Quantity of ?__

• MFG:___________________Model:__________________Compare to:_____________________ o $______________________Unit Cost $__________________Quantity of ?__

• MFG:___________________Model:__________________Compare to:_____________________ o $______________________Unit Cost $__________________Quantity of ?__

• MFG:___________________Model:__________________Compare to:_____________________ o $______________________Unit Cost $__________________Quantity of ?__

• MFG:___________________Model:__________________Compare to:_____________________ o $______________________Unit Cost $__________________Quantity of ?__

• MFG:___________________Model:__________________Compare to:_____________________ o $______________________Unit Cost $__________________Quantity of ?__

• MFG:___________________Model:__________________Compare to:_____________________ o $______________________Unit Cost $__________________Quantity of ?__

• MFG:___________________Model:__________________Compare to:_____________________ o $______________________Unit Cost $__________________Quantity of ?__ o $______________________Unit Cost $__________________Quantity of ?__

• MFG:___________________Model:__________________Compare to:_____________________ o $______________________Unit Cost $__________________Quantity of ?__

• MFG:___________________Model:__________________Compare to:_____________________ o $______________________Unit Cost $__________________Quantity of ?__

• MFG:___________________Model:__________________Compare to:_____________________ o $______________________Unit Cost $__________________Quantity of ?__

• MFG:___________________Model:__________________Compare to:_____________________ o $______________________Unit Cost $__________________Quantity of ?__

• MFG:___________________Model:__________________Compare to:_____________________ o $______________________Unit Cost $__________________Quantity of ?__

Other Costs and Description: