2012DEPSERVICEWITHCANOPY.xls
XLS spreadsheet 39 KB Posted
- Solicitation number
- RFQ - 18P - 12071000000000000015
- Issued by
- Kennebec County, Maine
About this file
This specification document outlines requirements for a fiberglass composite or aluminum service body with canopy to be installed on a 2013 GMC Sierra 3500HD for the State of Maine. The specification details a heavy-duty utility body featuring a 58-inch interior canopy height, 132-inch length, 94-inch width, and 42-inch cabinet height, with a full-width canopy equipped with double rear doors and aluminum bulkhead. The vehicle configuration includes a 6.6-liter diesel engine, dual rear wheels, regular cab, four-wheel drive, and 162-inch wheelbase. The service body must feature a steel understructure with 3/16-inch aluminum flooring, stainless steel latches and hardware throughout, and a solid fiberglass or aluminum interior bulkhead positioned approximately 7 feet forward of the rear doors to separate two compartments. Installation is to be completed at the state's Augusta location with the vehicle returned upon completion, and this installation cost must be included in the bid submission.
The exterior compartment layout specifies multiple storage solutions with differing configurations on the street and curb sides, including slide-out tool trays, horizontal compartments with standard shelving, and a personnel access door on the curbside. The body requires rope-style lighting in all compartments with door-activated and master switches, flow-through ventilation, and drain systems in all compartments. Additional specifications include a galvanized Sure Step bumper, Class IV trailer hitch rated for 10,000 pounds, aluminum or plastic fuel and DEF fill cones clearly marked, Wheatland Yellow exterior paint matching the cab and chassis with white interior compartments, FMVSS-compliant lighting package with LED components, wheel chock holders, backup alarm, seven-way RV trailer connector, and dome lights independently switched in each compartment. All electrical connections must be sealed with heat shrink and protected with heavy-duty wire loom, with no Scotch-Lok style connectors permitted.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Solicitation_terms.doc | DOC document | |
| PAYMENT METHOD (2).doc | DOC document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Sheet1
| SPEC# DEPSERVICEWITHCANOPY | SERVICE BODY W/CANOPY | ||||||
| GENERAL DESCRIPTION | Heavy duty aluminum or fiberglass utility body with canopy with a 58" inside height. All stainless steel latches, hinges, and hardware. | ||||||
| MINIMUM SPECIFICATIONS | |||||||
| APPLICATION | 2013 GMC Sierra 3500HD, 6.6 Liter Diesel, DRW, Regular cab, 4X4, 13,200 GVWR, 162" WB, 84" CA | ||||||
| BODY SIZE | Length: 132" Width: 94" Cabinet Height: 42" Canopy Interior Height: 58" | ||||||
| BODY SHELL & FLOOR | Steel understructure, 3/16" aluminum floor, coated, 4 recessed floor tie downs-2 directly above the rear axle & 2 at the rear of the body. Smooth aluminum header panel, Aluminum tail skirt, fully undercoated, undercoated wheel well liners, aluminum rock guards at front of body, full width canopy. No interior shelving within the canopy section of the body is specified. | ||||||
| WEATHER STRIPPING | Heavy duty, closed cell automotive type | ||||||
| CANOPY | Aluminum or Fiberglass composite canopy roof, full width, with double rear doors and aluminum bulkhead (if available). 2" retainer on top of compartment both street and curb sides. No interior shelving within the canopy section of the body is specified. | ||||||
| INTERIOR BULKHEAD | A solid, straight floor to ceiling, fiberglass or aluminum bulkhead is to be installed in the interior of the body 7 feet forward of rear doors, appx. 46 inches from the front interior of the body. Divider should be completely sealed to prevent any air movement between the two compartments. | ||||||
| EXTERIOR COMPARTMENTS CONSTRUCTION | Vinyl covered stainless steel cables on all doors. One-piece molded doors with automotive finish both sides. Recessed door jambs. Shelves to be standard fiberglass, or aluminum rated for 250lb. capacity, with twenty shelf dividers. Rope style lighting in all compartments with door activated switches and additional master switch in cab. Flow thru ventilation system. Drains in all compartments. Note-All stainless hardware latches, hinges, & hardware!! | ||||||
| EXTERIOR COMPARTMENTS LAYOUT | Street Side: Front Compartment: Standard with standard shelving. Standard Intermediate compartment with 9 slide out tool trays: 2 inch deep X 3, 3 inch deep X 3, and 5 inch deep X 3. Standard Horizontal compartment over wheel well with standard shelving; Standard rear compartment appx. 31" x 40" with standard shelving. Curb Side: Front compartment access door curb side: A personnel access door in lieu of the a storage compartment on the curbside, 60" tall opening. Standard Intermediate compartment with standard shelving. Long horizontal compartment appx. 72" x 16" over wheel well standard shelving; Short rear Compartment appx. 24" x 16" with standard shelving. | ||||||
| LIGHTS | 2)Dome Lights, ceiling mounted, centered, one in each compartment, independently switched. FMVSS lighting package. Quick connect loomed wiring harness. Flush mounted LED tail and backup lights, clearance lights and reflectors. License plate light with bracket. | ||||||
| PAINT | Exterior to match GM paint code 9W3-Wheatland Yellow to match cab and chassis. All interior compartments to be white. | ||||||
| BUMPER | Galvanized Sure Step bumper with no recess or ball plate recess. | ||||||
| TRAILER HITCH | Class IV drop reciever hitch rated for 10,000 lbs minimum weight carrying | ||||||
| FUEL FILL CONE | Aluminum or Black Plastic, marked "Diesel Fuel Only". | ||||||
| DEF FILL CONE | Aluminum or Black Plastic, marked "Exhaust Fluid Only". | ||||||
| INSTALLATION | Vehicle to be picked up at our location in Augusta, items installed, and vehicle returned to CFM in Augusta. (Please include in bid!!) All electrical connections to be sealed with heat shrink and fully protected with heavy duty wire loom. Absolutely no "Scotch-Lok" style connectors | ||||||
| ACCESSORIES | Wheel chock holders in fenders, 2 wheel chocks, back up alarm, 7 way RV style trailer connector, spare tire mount-supplied loose, | ||||||
| MAKE | Model | ||||||
| Possible Quantity | Unit Cost | Total Cost | |||||
| 1 | |||||||
| Bidder (Vendor) | Contact Person | Contact's Telephone | |||||
| VENDOR COMMENTS | |||||||
| ESTIMATED TIME FOR DELIVERY: |
Sheet2
Sheet3
File details come from the government source that posted it. Updated .