2011DEPFiberglassServicebody.xls
XLS spreadsheet 23 KB Posted
- Attached to
- DEP Fiberglass Utility Body with Canopy
- Solicitation number
- RFQ - 18P - 11061400000000001269
- Issued by
- Kennebec County, Maine
About this file
This specification document outlines equipment requirements for the Maine Department of Environmental Protection (DEP) procurement of a fiberglass composite service body with canopy to be installed on a 2011 GMC Sierra 2500HD pickup truck. The service body is to feature heavy-duty fiberglass composite construction with a canopy roof, measuring 96 inches in length by 82¾ inches in width by 60 inches in height, and is designed to accommodate exterior compartments with stainless steel hardware, shelving, and comprehensive lighting systems. The specification details include a fiberglass composite shell with steel understructure, 1/8-inch steel treadplate floor, aluminum components, and specific compartment configurations including a transverse front compartment, horizontal compartments over wheel wells, and rear compartments with adjustable shelving. The vehicle is to be finished in GM paint code "9W3" (Wheatland Yellow) with white interior compartments, equipped with FMVSS-compliant lighting, strobes, backup alarm, and a class IV trailer hitch with 7-way RV connector. Installation and pickup/return of the vehicle to the CFM location in Augusta is required as part of the bid.
The specification document provides minimum requirements for bidders to submit unit cost and total cost proposals for the service body installation. Vendors must identify possible quantities, include delivery time estimates, and provide contact information with comments. The document indicates that electrical connections must be sealed with heat shrink and heavy-duty wire loom, with no Scotch-Lok style connectors permitted. All stainless steel latches, hinges, and hardware are specified throughout, and the body includes standard features such as master rod lock systems, flow-through ventilation, compartment drains, and 250-pound capacity shelving with twenty shelf dividers.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Solicitation_terms.doc | DOC document | |
| PAYMENT METHOD (2).doc | DOC document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Sheet1
| SPEC# 2011DEPFIBERGLASS | COMPOSITE FIBERGLASS SERVICE BODY | ||||||
| GENERAL DESCRIPTION | Heavy duty fiberglass composite service body with canopy. All stainless steel latches, hinges, and hardware. | ||||||
| MINIMUM SPECIFICATIONS | |||||||
| APPLICATION | 2011 GMC Sierra 2500HD, SRW, Ext. Cab, 4X4, 6.6 Litre Diesel, 10000GVW, 158.2" WB, cab to axle: 56" | ||||||
| BODY SIZE | Length: 96" Width: 82-3/4" Height: 60" inside head room | ||||||
| BODY SHELL & FLOOR | Fiberglass composite construction throughout, steel understructure, 1/8" steel treadplate floor, 3/16" smooth aluminum header panel, 3/16" aluminum tail skirt, fully undercoated, undercoated steel wheel well liners, aluminum rock guards at front of body. Aluminum or stainless steel roof racks supplied w/fasteners, loose in body. | ||||||
| WEATHER STRIPPING | Heavy duty, closed cell automotive type | ||||||
| CANOPY | Fiberglass composite canopy roof, full width, double rear doors with windows, and aluminum bulkhead (if available). 1 Fixed shelf on both street and curb sides, 2" retainer on top of compartment both street and curb sides | ||||||
| EXTERIOR COMPARTMENTS CONSTRUCTION | Vinyl covered stainless steel cables on all doors. 4 over center door checks. One-piece molded doors with automotive finish both sides. Recessed door jambs. Shelves to be 18 gauge galvanized, hemmed, rated for 250lb. capacity, with twenty shelf dividers. Master rod lock system. Flow thru ventilation system. Drains in all compartments. Note-All stainless hardware latches, hinges, & hardware!! | ||||||
| EXTERIOR COMPARTMENTS LAYOUT | Front compartment= Transverse open both sides, Cage and drawer pull 2 way, full length drawer. Street Side & Curb Side: Standard Horizontal compartment over wheel well with one adjustable shelf. Standard rear compartment with one adjustable shelf. | ||||||
| LIGHTS | FMVSS lighting package. Quick connect loomed wiring harness. Flush mounted tail and backup lights, clearance lights and reflectors. License plate light with bracket. 3 piece switch panel in cab, 2 interior roof dome lights with a switch in cab panel, 2 "V-head" or (preapproved equivalant) amber strobes mounted on upper rear sides of canopy and 2 hide a way amber strobes mounted in front lights operated by a power supply with a switch in cab panel, 50 watt rectangular halogen flood light mounted over center high mount brake light with switch in cab panel. | ||||||
| PAINT | Exterior GM paint code "9W3" (Wheatland Yellow) Gelcoat. All interior compartments color to be white. | ||||||
| BUMPER & TRAILER HITCH | 8" steel tread plate step (no recess), class IV drop receiver hitch (receiver flush with bumper edge) | ||||||
| FUEL FILL CONE | Aluminum for 2500HD single drivers side 36 gal. tank, marked "Diesel Fuel Only". | ||||||
| INSTALLATION | Vehicle to be picked up at our location in Augusta, items installed, and vehicle returned to CFM in Augusta. (Please include in bid!!) All electrical connections to be sealed with heat shrink and fully protected with heavy duty wire loom. Absolutely no "Scotch-Lok" style connectors | ||||||
| ACCESSORIES | Back up Alarm, 7 way RV style trailer connector. | ||||||
| MAKE | Model | ||||||
| Possible Quantity | Unit Cost | Total Cost | |||||
| 1 | |||||||
| Bidder (Vendor) | Contact Person | Contact's Telephone | |||||
| VENDOR COMMENTS | |||||||
| ESTIMATED TIME FOR DELIVERY: |
Sheet2
Sheet3
File details come from the government source that posted it. Updated .