2-RFB 37-26-BC Bid Document.pdf
PDF 527 KB Posted
- Attached to
- On-Demand Road Maintenance Aggregates State and local contract opportunity
- Solicitation number
- RFB 37-26-BC
- Issued by
- Bernalillo County, New Mexico
About this file
This is a Request for Bids (RFB) document issued by Bernalillo County, New Mexico for the procurement of on-demand road maintenance aggregates. The County's Public Works Division, Operations and Maintenance Department seeks suppliers of base course material, plaster/masonry sand, crushed red scoria cinders, and chip stone for roadway chip sealing. The procurement is structured as an indefinite quantity contract with estimated annual quantities varying by material type and delivery location: base course (16,000 tons across six sites), plaster/masonry sand (500 tons pickup by county), cinders (1,300 tons across three sites), and chip stone in both 3/8-inch and 1/2-inch sizes (22,000 tons combined across six sites). Bidders must submit responses electronically through the County's eProcurement system (Bonfire) by March 16, 2026, at 2:00 p.m. Mountain Time. No pre-bid conference or site visit is specified. The resulting contract shall be effective upon execution and continue for four years with an option to extend for an additional one-year period. The contract allows for termination by either party under specified conditions, including termination for convenience by the County with thirty days' notice.
Pricing must be submitted as firm fixed unit prices and haul prices (where applicable) per ton, with all prices F.O.B. destination and excluding gross receipts tax at bid time, though tax will be applied upon invoice. The County reserves the right to award on an item-by-item, lot-by-lot, or total bid basis depending on which approach is most advantageous. Bidders must comply with multiple preference provisions under New Mexico State Procurement Code and Bernalillo County Ordinance 2-367, including preferences for state resident businesses (5%), Native American resident businesses (8%), state resident veteran businesses (10%), local businesses (5%), small businesses (5%), and pay equity businesses (5%), with a combined preference cap of 18% and a county preference dollar limit of $180,000. All bidders must submit a Pay Equity Reporting Form or valid Pay Equity Business Certificate and an Unfair Business Practices Disclosure Form or risk disqualification. Material specifications include detailed gradation requirements, engineering standards, and testing protocols in accordance with ASTM standards. Insurance requirements include commercial general liability ($1,000,000 per occurrence/$2,000,000 aggregate), automobile liability ($1,000,000 per accident), and workers' compensation coverage. Payment will be processed within thirty days of invoice receipt upon completion of delivery and acceptance of materials, with weigh tickets certified by approved testing laboratories required for all deliveries.
View the file
Other files for this state and local contract opportunity
| File | Type | Posted |
|---|---|---|
| 1-Letter of Interest RFB 37-26-BC Road Maintenance Aggregate.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
COUNTY OF BERNALILLO
STATE OF NEW MEXICO
INVITES YOUR FIRM TO OFFER A BID ON:
RFB #37-26-BC
On-Demand Road Maintenance Aggregates
AS SPECIFIED IN THE ATTACHED BID DOCUMENTS.
Deadline for Receipt of Bids: March 16, 2026 2:00 p.m. (Mountain Time)
The County eProcurement System will not allow Bids to be submitted after this date and time.
FIRM NAME
STREET ADDRESS/P.O. BOX
CITY, STATE, ZIP CODE
TELEPHONE NUMBER E-MAIL ADDRESS FAX NUMBER
DEFINITIONS
This section contains definitions that are used throughout this Request for Bids (RFB), including appropriate abbreviations.
“Agreement” means any contract for the procurement of items of tangible personal property, services or construction.
“Addendum” means an addition or supplement to the RFB document, for example, items or information added to the RFB.
“Award of Contract” shall mean a formal written notice by the Purchasing Section.
“Bidder” means one who submits a response to an invitation for Request for Bid (RFB).
“Contractor” shall mean successful Bidder.
“County” shall refer to the County of Bernalillo, New Mexico.
“Central Purchasing Office” means the County Purchasing Section.
“County Purchasing Section” of the Procurement and Business Services Department, means the purchasing agent for the County of Bernalillo, New Mexico, or a designated representative thereof.
“Firm Fixed Price Contract” means a contract which has a fixed total price or fixed unit prices.
“Indefinite Quantity Contract” means a contract which requires the Contractor to furnish an indeterminate quantity of specified services, items of tangible personal property or construction during a prescribed period of time at a definite unit price or at a specified discount from list of catalogue prices.
“Local Business Preference” means a business that holds a valid Resident Native American Business/Contractor certificate issued by the State of New Mexico Taxation and Revenue Department and maintains an office and place of business in Bernalillo County, which is staffed and open to the public on a regular basis. If necessary, the County may seek additional information or proof to verify eligibility for the Local Business Preference, pursuant to §13-1-22 NMSA 1978 and Ordinance §2-367.
“Multiple Source Award” means an award of an indefinite quantity contract for one or more similar services, items of tangible personal property or construction to more than one Bidder.
“Pay Equity Preference” means any business that maintain a zero percent (0%) deviation between the salaries paid to men and salaries paid to women for comparable positions, as reported in the Pay Equity Reporting form that has been submitted by the Offeror.
“Preference Limitations” is the total amount of all preferences applied including the applicable State of New Mexico preferences, for the purchase of Tangible Personal Property, Services or Construction in any single award shall not exceed 18%, with the limit on State of New Mexico preferences as set forth under the New Mexico State Procurement Code. When applying the Bernalillo County preferences as set forth in Ordinance §2-367, the total dollar amount of Bernalillo County preferences shall never exceed $180,000.00.
“Pre-bid Conference” means a meeting held with prospective Bidders prior to solicitation of bids, to clarify any ambiguities, answer Bidder questions, and ensure all Bidders have a common basis of understanding regarding the items of tangible personal property or services required.
“Purchase Order” means the document issued by the Purchasing Section, which directs a Contractor to deliver items of tangible personal property or services pursuant to the Award of a Contract.
“Request for Bids” or “RFB” means all documents, including those attached or incorporated by reference, used for soliciting bids.
“Resident Business/Contractor Preference” means a business that has a valid resident or Native American business certificate issued by the taxation and revenue department pursuant to §13-1-22 NMSA 1978 but does not include a resident veteran business.
“Resident Veteran Business/Contractor Preference” means a business that has a valid resident or Native American veteran business certificate issued by the taxation and revenue department pursuant to §13-1-22 NMSA 1978.
“Responsible Bidder” means a business entity or individual who has the ability to fulfill the solicitation expectations and requirements, including but not limited to financial and technical capacity to perform the requirement of the solicitation and subsequent Contract; “Responsive Bid” means a Contractor, business entity or individual who has submitted a bid or proposal that fully conforms in all material respects to the Request for Bids and all of its requirements including all form and substance.
“Small Business Preference” means a business that has a Local Business Preference eligibility documentation as well as an affidavit from a Certified Public Accountant (CPA) affirming that the business employs an average of fewer than 50 full-time employees in a calendar year. Ordinance §2-367.
“Specifications” means a description of the physical or functional characteristics or of the nature of items of tangible personal property, services or construction. “Specifications” may include a description of any requirement for inspecting or testing, or for preparing items of tangible personal property, services or construction for delivery.
(This space intentionally left blank)
FORMAL BID
SUBMITTAL REQUIREMENTS
THE REQUIREMENTS CHECKED BELOW APPLY TO THIS BID. FAILURE TO COMPLY WITH THE STATED
REQUIREMENTS MAY RESULT IN IMMEDIATE DISQUALIFICATION.
Nothing herein is intended to exclude any responsible bidder or in any way restrain or restrict competition.
All responsible bidders are encouraged to bid and their bids are hereby solicited.
XXX Please acknowledge receipt of Addendum (if applicable) by initialing next to the number of Addendum received. 1. _______ 2. _______ 3. _______ 4. _______
XXX
This procurement is subject to the Application of Preferences pursuant to §13-1-21 and §13-1- 22, NMSA 1978 and the County Ordinance §2-367. See page 21-22 for further details.
XXX Bidder shall disclose any conflict of interest in writing and submit the information with the bid in accordance with paragraph 9 of the General Terms and Conditions (page 6).
XXX The bid must be signed by an authorized representative below. Failure to sign may result in disqualification.
XXX
If a prompt payment discount is offered, it is required that a minimum of twenty (20) days be allowed for payment in order for the discount to be considered. Please state your discounted terms: _____________________.
XXX
Pay Equity Documentation:
Bidder shall include with their bid submittal, a Pay Equity Reporting Form, or valid Pay Equity Business Certificate, which can be accessed at: www.bernco.gov/general-services/pay-equity.aspx. See page 7 and “Application of Preferences” (pages 26-27) Failure to submit the Pay Equity Form may result in disqualification of the bid submittal.
XXX
Unfair Business Practices Disclosure:
Bidder must submit with their bid the completed “Unfair Business Practices Disclosure Form” (see page 25). Failure to complete and return the signed unaltered form may result in disqualification.
XXX Bid must be a firm fixed price and include all incidental charges. See Pricing Section for further details on pages.
XXX All prices shall be F.O.B. Destination.
XXX
All bids shall be submitted electronically through the County’s eProcurement system Bonfire. A complete bid including all forms, attachments and exhibits shall be uploaded to the eProcurement system https://bernco.bonfirehub.com/portal/?tab=openOpportunities. Please allow a minimum of 24 hours to submit your bid. If you do not have a username and password, please register at https://bernco.bonfirehub.com/login as this is the only method to submit electronically on the Bonfire portal. For assistance, please contact support@gobonfire.com. Failure to submit your bid electronically through the County’s eProcurement system shall result in your bid being deemed nonresponsive.
In compliance with this Request for Bid and subject to all terms and conditions referenced within this RFB hereof, the undersigned offers and agrees to furnish its services upon which prices are quoted at the price submitted with this bid and hereby certify that I am authorized to sign this bid for the firm and agree to furnish as indicated below:
Signature: Fed ID No.:
Name (type/print): Title:
http://www.bernco.gov/general-services/pay-equity.aspx http://www.bernco.gov/general-services/pay-equity.aspx https://bernco.bonfirehub.com/portal/?tab=openOpportunities https://bernco.bonfirehub.com/login mailto:support@gobonfire.com
GENERAL TERMS AND CONDITIONS
Below are the County’s Purchase Order General Terms and Conditions.
1. INSPECTION AND AUDIT: A. The County may inspect, at any reasonable time, any part of Contractor’s plant or place of business, which is related to performance of the services described herein. Acceptance of delivery shall not be considered acceptance of the materials, supplies or services furnished. Final inspection will be made at the destination upon completion of delivery of goods and services. Final inspection shall include any testing or inspection procedures required by the specifications. B. The Contractor shall maintain detailed time records, which indicate the date, time and nature of services rendered. Contractor shall maintain detailed records of all materials or supplies delivered to the County, including serial number and other appropriate identifiers. These records shall be subject to internal and external audit. The County shall have the right to audit billings both before and after payment. Payment under the resultant agreement shall not preclude the County from recovering excessive, erroneous or illegal payments previously made by the County.
2. ASSIGNMENT: The Contractor shall not assign or transfer any interest in this Agreement (whether by assignment or novation), without the prior written consent of the County.
3. TERMINATION AND DELAYS: The County may by written notice stating the extent and effective date, terminate for convenience in whole or in part, at any time: the County shall pay Contractor as full compensation for performance until such termination: A. the unit or pro rata order price for the delivered and accepted portion; and B. incidental damages, not otherwise recoverable from other sources by Contractor as approved by the County, with respect to the undelivered or unaccepted portion of the issued Purchase Order, provided compensation hereunder shall in no event exceed the total Purchase Order price. Such amount will be limited to Contractor’s actual cost and may not include anticipated profits. The County shall not be liable for consequential damages.
The County may by written notice terminate in whole or in part for Contractor’s default if Contractor refuses or fails to comply with the provisions of the terms and conditions contained herein and/or the County’s Purchase Order, or fails to make progress so as to endanger performance and does not cure such failure within a reasonable period of time. In such event the County may otherwise secure the materials, supplies or services ordered, and Contractor shall be liable for damages suffered by the County thereby, including incidental and consequential damages.
If after notice of termination, the County determines Contractor was not in default, or if Contractor’s default is due to failure of the County, termination shall be deemed for the convenience of the County.
The rights and remedies of the County provided in this article shall not be exclusive and are in addition to any rights and remedies provided by law.
4. EQUAL OPPORTUNITY AND AFFIRMATIVE ACTION: The Contractor agrees to abide by all Federal and State laws and regulations pertaining to equal employment opportunity. If Contractor is found to be not in compliance with these requirements during the life of this Agreement, Contractor agrees to take appropriate steps to correct these deficiencies.
5. PENALTIES: The County Ordinance imposes civil and criminal penalties for its violation. In addition, the New Mexico criminal statutes impose felony penalties for bribes, gratuities and kickbacks.
6. TITLE AND DELIVERY: Title to the materials and supplies passed hereunder shall pass to the County upon acceptance at the F.O.B. destination point specified subject to the right of the County to reject for any exception to the delivery date specified. The Contractor shall give prior notification and obtain approval thereto from the County Purchasing Section.
7. APPLICABLE LAW: The laws of the State of New Mexico shall apply.
8. COMPLIANCE WITH APPLICABLE LAW: The Contractor shall comply with all applicable state, federal, municipal and county laws, rules and ordinances.
9. CONFLICT OF INTEREST: The Contractor warrants that he/she presently has no interest and shall not acquire any, which would conflict in any manner or degree with the performance of services required under this procurement. Contractor must disclose any conflict of interest in writing. Definition of conflict of interest includes, but is not limited to, the following: A. relationship, if any, with a County employee; state their name and position, B. the County employee connected in any way with your firm, C. if any type of commitment is/has been given to your firm, by a County employee, state their name and position held.
10. WARRANTIES: Contractor warrants the materials, supplies or services furnished to be exactly as specified, free from defects in Contractor's design, labor, materials and manufacture, and to be in compliance with any drawings or specifications incorporated herein and with any samples furnished by Contractor. All applicable UCC warranties, express and implied, are incorporated herein.
11. ACCEPTANCE: The County may reject acceptance of any material, supplies, or services found to be defective or not as specified. At the County’s option the Contractor shall be required to a.) Correct without charge within a reasonable time, or b.) Deliver an equitable substitute at a reduced price. The County may revoke acceptance of any material, supplies or services, if a defect substantially impairs the value to the County and is discovered after acceptance. Should this occur, the Contractor shall reimburse the County for all incidental and consequential costs related to unaccepted materials, supplies or service, notwithstanding final acceptance; acceptance of material, supplies, or services shall not waive the County’s right to claim damages for breach.
12. CHANGES: The County may make changes within the general scope of the procurement by giving notice to Contractor and subsequently confirming such changes in writing via a Purchase Order change notice. If such changes affect the cost of, or the time required for performance, an appropriate equitable adjustment shall be made. No change by Contractor shall be recognized without written approval of the County. Any claim of Contractor for an adjustment under this paragraph must be made in writing within thirty (30) days from the date of receipt of Contractor of notification of such change, unless the County waives this condition. Nothing in this paragraph shall excuse Contractor from proceeding with performance as changed hereunder.
13. PATENT AND COPYRIGHT INDEMNITY: Contractor shall pay all royalty and license fees relating to deliverables and other items covered hereby. In the event any third party shall claim that the reproduction, manufacturer, use or sale of goods or items covered hereby infringes any copyright, trademark, patent or other intellectual property rights, Contractor shall indemnify and hold the County harmless from any cost, expense, damage or loss resulting therefrom.
14. DISCOUNTS: Any discount time will not begin until the materials, supplies, or services have been received and accepted and correct invoice received by the Purchasing Section. In the event testing is required, the discount time shall begin upon the completion of the tests.
15. PAYMENT CHARGES: Late payment charges shall be paid in the amount and under the conditions stated in County Ordinance §2-381.
16. APPROPRIATIONS: The terms of this Agreement are contingent upon the County Commission making the appropriations and authorizations necessary for the performance of the Agreement. If sufficient appropriations and authorizations are not made by the County Commission, any Agreement resulting from this Request for Bids may be terminated at the end of the County’s then current fiscal year upon written notice given by the County to the Contractor. Such event shall not constitute an event of default. All payment obligations of the County and all of its interest in this Agreement shall cease upon the date of termination.
The County’s decision as to whether sufficient appropriations are available shall be accepted by the Contractor and shall be final.
SUPPLEMENTAL TERMS AND CONDITIONS
1. POWER OF THE COUNTY: The County reserves the right to accept or reject any and/or all bids and unless otherwise specified by the Bidder, to accept any item in the bid, to waive technicalities, to inspect, and/or to make any investigation deemed necessary of a Bidder’s ability to provide the material, supplies or services covered by the Specifications or other criteria documents and to accept what in its judgment is the best bid.
Without limiting the generality of the foregoing, any bid which is incomplete, obscure or irregular may be rejected; any bid having erasures or corrections in the price sheet(s) may be rejected; any bid in which unit prices are omitted, or which are accompanied by an insufficient or irregular Bid Bond or other requirements may be rejected. The County also reserves the right to reject the bid of a Bidder who has previously failed to perform properly, provided inferior material, supplies, or services, provided inferior workmanship, or attempted to use substandard equipment, caused excessive inspection by the County to insure good workmanship, or utilized poor construction methods, or failed to complete an agreement of similar nature on time, or the Bidder is not in a position to perform the work governed by the Agreement.
2. UNLAWFUL EMPLOYEE PARTICIPATION: No elected official or employee of the County or public officer of the State of New Mexico shall be admitted to any share or part of this Agreement or any benefit that may arise thereof, directly or indirectly, unless it be made with a corporation for its general benefit.
3. DISTRIBUTION OF RFB DOCUMENT: The County Purchasing Section is the only organization who is authorized to make copies and/or distribute this RFB in any format. A distribution list of those who receive the RFB will be maintained throughout the procurement process and will become part of the procurement file. Receipt of a Bid from firms not included on the distribution list shall result in immediate disqualification and Bid will be rejected.
4. EXPLANATION TO BIDDERS: Any explanation desired by a Bidder regarding the meaning or interpretation of this request must be submitted in writing and with sufficient time allowed, but not less than three (3) working days prior to the hour and date specified for the receipt of the bids, for reply to reach Bidders before the submission of their bids. Oral explanations or instructions given before the award of the agreement will not be binding. Any information given to prospective Bidder(s) concerning this request will be furnished as an addendum, to all firms who have received the bidding document.
5. NON-COLLUSION: The Bidder, in signing this bid, certifies that representatives from the firm have not, either directly or indirectly, entered into any action or restraint of free competitive quoting or bidding in connection with this Bid.
6. CODE OF CONDUCT: Code of Conduct – The successful Bidder shall abide by the Code of Conduct (https://www.bernco.gov/compliance-office/bernalillo-county-code-of-conduct/) of the County as it applies to the successful Bidders interactions with the County. Any violation of the Code of Conduct shall be considered a breach of the Agreement (a draft of the proposed Agreement is included beginning on page 17).
7. EVALUATION: The evaluation period for this bid is ninety (90) consecutive calendar days, following the bid opening. Bids may not be rescinded during this period except for good cause and with the written approval of the Purchasing Section. The County, in evaluating bids reserves the right to use any assistance deemed advisable.
8. INCREASED OR DECREASED QUANTITIES: The County reserves the right to increase or decrease the quantities of items of tangible personal property, services or construction to be provided within the terms of the agreement and at the same prices, with the consent of the Contractor.
9. REJECTION AND CANCELLATION: The County reserves the right to reject any or all bids, cancel this RFB when it is in the best interest of the County, or to waive any and all informalities and irregularities that don’t alter the price, quality or quantity.
10. BASIS OF AWARD: The County reserves the right to award on a total basis or an item by item basis depending on which is most advantageous to the County. Final bid award will be made on the lowest, best, and most responsible bid meeting the specifications.
11. PAY EQUITY DOCUMENTATION: All Bidders shall include with their bid submittal, a Pay Equity Reporting Form, or valid Pay Equity Business Certificate, which can be accessed at www.bernco.gov/general-services/pay-equity.aspx.
https://gcc02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.bernco.gov%2Fcompliance-office%2Fbernalillo-county-code-of-conduct%2F&data=05%7C01%7Cacbaca%40bernco.gov%7Ca0475eac0ea04b74a46208dafef5c0ad%7C2017becccef8453fae3c04934fc97714%7C0%7C0%7C638102628707140665%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=NSVmDNQrHf0WLxXW26bnUPp2T3oQhj2sFyzUWqrk4uU%3D&reserved=0 http://www.bernco.gov/general-services/pay-equity.aspx http://www.bernco.gov/general-services/pay-equity.aspx
Bidders who are located out-of-state or have no facilities and no employees working in the State of New Mexico are not required to report pay equity data but must verify their out-of-state status on the Pay Equity Reporting Form. Failure to provide a Pay Equity Reporting Form at the time of submission may result in the bid being deemed nonresponsive. The County may allow for a revised Pay Equity Reporting Form to be submitted by the Offeror within 24 business hours of the proposal due date and time if; (i) the originally submitted form requires a technical change; or (ii) the Bidder fails to include a Pay Equity Reporting Form at the time of submission, provided that the Bidder submits the Pay Equity Reporting Form within the 24 hour business period.
NOTE: THE REQUIRED PAY EQUITY REPORTING FORM IS NOT A PAY EQUITY BUSINESS
CERTIFICATE, NOR DOES IT QUALIFY AN OFFEROR FOR THE PAY EQUITY PREFERENCE. FOR
QUESTIONS ON HOW TO OBTAIN A PAY EQUITY BUSINESS CERTIFICATE, PLEASE CONTACT THE
BUYER IN SECTION I.C BY TELEPHONE: (505) 468-7318 OR EMAIL: bcastro@bernco.gov
12. MULTIPLE AWARD: The County reserves the right to award the Agreement to multiple contractors.
Determination for awards shall be based upon the lowest total cost of all items listed within the “cost proposal” section and the bidder(s) abilities to meet the “minimum and submittal requirements” of the invitation to bid.
13. PROTESTS: Protests - In accordance with County Ordinance §2-367 and §2-385, any Bidder who is aggrieved in connection with a solicitation or award of an Agreement may protest to the Procurement and Business Services Director. The protest must be submitted in writing within fifteen (15) calendar days after knowledge of the facts or occurrences giving rise to the protest to:
Annie Baca, Procurement and Business Services Director 415 Silver Ave. SW, 6th Floor Albuquerque, NM 87102
Protests must include the name and address of the protestant, the solicitation number, and a statement of grounds for protest, including appropriate supporting exhibits. Protests received after the deadline will not be accepted.
14. CONFIDENTIALITY/PUBLIC RECORDS: Confidential data is normally restricted to confidential financial information concerning the Bidders organization and data that qualifies as trade secrets in accordance with the Uniform Trade Secrets Act, 57-3-A-1 to 57-3A-7 NMSA 1978, or as provided by the Confidential Materials Act (14-3A-1, 1978 14-3A-2 NMSA 1978), and as otherwise provided by law. With the exception of the aforementioned, information and materials received by the County in connection with this RFB response shall be deemed to be public records, subject to public inspection, upon award of the RFB and execution of an Agreement by the County Commission or their designee. If the Bidder believes any of the information contained in its response is exempt from the Public Records Act, then the Bidder, must identify the material which is deemed to be exempt and cite the legal authority for the exemption. Any pages of the bid on which the Bidder has stamped or imprinted “proprietary” or “confidential” must be readily separable from the bid in order to facilitate public inspection of the non-confidential portion of the bid.
The County’s determination of whether an exemption applies shall be final, and the Bidder agrees to defend indemnify and hold harmless the County elected officials, employees and agents against any loss or damages incurred by any person or entity as a result of the County’s treatment of records as public records.
15. SPECIFICATIONS: Specifications stated in this request are not intended to exclude any Bidder. Where a product is characteristic of a sole manufacturer, or when a brand name is indicated, it shall be defined to mean as "least acceptable level”, or "minimum quality required" by the County. If an item is bid other than specified which is considered comparable, the manufacturer's name and model number of that item must be specified. Sufficient performance specification and descriptive data must accompany the bid to permit thorough evaluation. Failure to provide the appropriate information may result in disqualification of the bid.
16. RECEIPT OF BIDS: Bids received after the deadline will not be accepted. The date-time stamp located in the Purchasing Section will be used to record receipt of the bid and is the only acceptable evidence to establish the time of receipt of bids.
17. AWARD TO NEXT RATED BIDDER: In the event of default by the awarded vendor, the County reserves the right to utilize the next rated Bidder meeting specifications as the new vendor. In the event of this mailto:bcastro@bernco.gov occurrence, the next rated bidder meeting specifications shall be required to provide the bid items at the prices as contained on their proposal or bid for this specification.
18. NUMBER OF BID SUBMITTALS
Bidders may submit only one (1) bid in response to this RFB.
19. NUMBER OF COPIES: Bidders shall upload one (1) original their bid submittal to https://bernco.bonfirehub.com/portal/?tab=openOpportunities.
20. QUESTIONS: If additional information regarding this bid or the procurement process is required, please contact Buyer/Brittney Castro) (505-468-7318), or e-mail bcastro@bernco.gov
21. INSURANCE REQUIREMENTS: Insurance is required of the Contractor in the limits identified in the Draft Agreement, Section 12, attached hereto.
22. W-9 INFORMATION: Pursuant to Federal Tax Law (Internal Revenue Code, Section 6041), the County is required to obtain a Taxpayer Identification Number (TIN) and a completed W-9 from the successful Bidder;
according to Federal Income Tax Law (Internal Revenue Code, Section 3406), failure to furnish this information promptly and correctly (within 30 days) may result in a $50.00 penalty imposed by the Internal Revenue Service. In addition, the Internal Revenue Service may require the County to withhold 28% of payments made, if the information is not furnished by the successful Bidder.
If the successful Bidder’s business is classified as a corporation, tax-exempt organization, government agency, or other exempt payee, the County will not file an Annual Information Return (Form 1088 Misc.) on your behalf. However, the law requires your TIN in addition to informing the County of payee type. If classified as an individual or sole proprietor, the TIN is your Social Security Number; otherwise, your Federal Employer Identification Number serves as your TIN.
https://bernco.bonfirehub.com/portal/?tab=openOpportunities mailto:bcastro@bernco.gov
EXCEPTIONS
RFB # 37-26-BC
In the interest of fairness and sound business practices, it is mandatory that you state any exceptions to the specifications and/or scope of work. It is not the responsibility of the County to seek out information concerning the goods to be furnished. If your bid does not meet or exceed all of the stated specifications, you must so state on the space provided below, with an explanation:
I do ___________ do not meet specifications ___________
Authorized Signature and Title Telephone Number
SCOPE OF SERVICES
RFB # 37-26-BC
PRICE AGREEMENT FOR ROAD AGGREGATE MATERIALS
I. GENERAL INFORMATION:
Bernalillo County Public Works Division, Operations and Maintenance Department administers a variety of activities, which require the procurement of base course material, plaster/masonry sand, cinders, and chip stone (for roadway chip sealing). It is the intent of the following specifications to identify minimum requirements for the proposed product. Procurement of the referenced material shall be on an as needed basis with no guaranty of any quantities implied. Materials received shall be invoiced as non-taxable materials.
II. BASE COURSE
A. DELIVERY LOCATIONS ESTIMATED ANNUAL QUANTITIES
North Valley Yard 2,000 Tons South Valley Yard 2,000 Tons 2400 Broadway Maintenance Complex 1,000 Tons North Mountain Yard 5,000 Tons South Mountain Satellite Yard 5,000 Tons South Mountain Road Maintenance Yard 1,000 Tons
B. DELIVERY REQUIREMENTS
1. Contractor(s) shall be responsible for delivering requested material to the site identified by
County staff.
2. Base course product delivery shall commence within five (5) working days upon issuance of an order request.
3. Material will be accepted Monday through Friday from 7:30 a.m. until 3:30 p.m.
4. County may choose to pick up material, in which the haul price would not be billed.
III. PLASTER / MASONRY SAND
A. DELIVERY LOCATIONS ESTIMATED ANNUAL QUANITITIES
Pick up by County Vehicles 500 Tons
IV. CRUSHED RED SCORIA- CINDERS
A. DELIVERY LOCATIONS ESTIMATED ANNUAL QUANITITIES
2400 Broadway Maintenance Complex 300 Tons North Mountain Yard 500 Tons South Mountain Road Maintenance Yard 500 Tons
1. Contractor(s) shall be responsible for delivering requested material to the site identified by
County staff.
2. Cinder material delivery shall commence within five (5) working days upon issuance of an order request.
3. Material will be accepted Monday through Friday from 7:30 a.m. until 3:30 p.m. County may choose to pick up material, in which the haul price would not be billed.
V. CHIP STONE
A. DELIVERY LOCATIONS ESTIMATED ANNUAL QUANITITIES
North Valley Yard 1,000 Tons South Valley Yard 5,000 Tons 2400 Broadway Maintenance Complex 5,000 Tons North Mountain Yard 5,000 Tons South Mountain Satellite Yard 1,000 Tons South Mountain Road Maintenance Yard 5,000 Tons
1. Contractor(s) shall be responsible for delivering requested material to the site identified by County staff.
2. Chip Stone product delivery shall commence within five (5) working days upon issuance of an order request.
3. Material will be accepted Monday through Friday from 7:30 a.m. until 3:30 p.m. County may choose to pick up material, in which the haul price would not be billed.
VI. SITE LOCATIONS
Site A: North Valley Yard, 606 Industrial Road east of Edith Boulevard
Site B: South Valley Yard, 1120 Old Coors Blvd. S.W.
Site C: Public Works Division, 2400 Broadway S.E.
Site D: North Mountain Yard, 25 Frost Road, Sandia Park, NM 87047
Site E South Mountain Satellite Yard, 172 Highway 217, Edgewood, NM 87015
Site F South Mountain Road Maintenance Yard, 15 South Zamora Road, Tijeras, NM 87059
VII. MATERIAL SPECIFICATIONS
A. BASE COURSE
Crushed base course aggregate materials to be delivered to stockpiles shall be combined in such proportions that the resulting composite blend meets the requirements in the following table:
B. GRADATION REQUIREMENT TABLE
SIEVE ANALYSIS % PASSING
1 inch 100% ¾ inch 80 – 100% No. 4 30 - 60% No. 30 20 - 45% No. 200 3– 10%
C. ENGINEERING REQUIREMENTS TABLE
1. CHARACTERISTIC SPECIFICATION LIMIT(S)
Aggregate Type Fine Course Los Angeles Abrasion Wear (ASTM C 131) 40% max. loss Soundness (5 cycles ASTM C 88) 15% max. loss 15% max. loss Crushed Aggregate (% Material Retained on 3/8” 50% min.
Sieve by wt., having at least two (2) fractured faces Maximum % passing No. 200 60% of – No. 30 Plasticity Index (Material finer than No. 40 sieve) 4.0 max.
Sand Equivalent Value 35 min.
2. Fifty percent by weight of all plus No. 4 material shall have a minimum of two (2) mechanically fractured faces.
3. Aggregate base coarse shall be coarse aggregate of either crushed stone, or crushed gravel, or crushed asphalt concrete, or crushed Portland cement concrete, or any combination.
4. Coarse aggregates retained on the No. 4 sieve shall consist of durable particles of either crushed gravel, or crushed asphalt concrete pavement, or crushed Portland cement concrete, or any combination capable of withstanding the effects of handling, spreading and compacting without degradation production of the deleterious fines. At least 50% of the particles retained on the 3/8-inch sieve, shall have two (2) or more fractured faces. Coarse aggregate shall comply with the requirements of the engineering requirement table.
5. Fine aggregate passing the No. 4 sieve shall consist of fines from the operation of crushing coarse aggregate; where available and suitable, natural sand or finer mineral matter or both may be added. Fine aggregate shall comply with the requirements of the engineering requirement table.
6. The job mix formula gradation shall comply with the requirements of gradation table and have the same or similar characteristic gradation curve as either range limit, when graphically plotted on a standard “0.45 POWER” Gradation Chart.
7. Aggregate base course furnished and placed under this specification shall have a resistance value (R-
Value), not less than 76 as determined by ASTM 02844.
D. BASE COURSE PRODUCT TYPES:
1. Crushed Recycled Concrete
2. Base course shall be quoted for the one product type delivered to each of the site locations previously referenced.
E. PLASTER / MASONRY SAND
Plaster / Masonry Sand materials to be delivered to stockpiles shall be delivered with no rock or debris.
1. AGGREGATE PHYSICAL PROPERTIES
Washed Masonry Sand
ASTM C-144 - Natural Sand
SIEVE ANALYSIS TEST RESULTS
ASTM C136 Sieve Size Specifications
4.75 mm (No. 4) 100
2.36 mm (No. 8) 95-100
2.00 mm (No. 10) 1.18mm (No.16) 70-100
0.600 mm (No.30) 40-75 0.425mm (No. 40) 0.300mm (No. 50) 10-35 0.180mm (No. 80)
0.150mm (No.100) 2-15 0.075mm (No. 200) 0-5
Organic Impurities Fine Aggregate, %= LTS Lightweight Pieces Fine Aggregate, %= max 0.5 Soundness ASTM C88 Fine Soundness Loss, %= max 15 Clay/Friable Particles Fine Aggregate, %= max 1.0 Liquid Limit, Liquid Limit= NV Plastic Limit = NV Plasticity Index = NP
F. CRUSHED RED SCORIA- CINDERS
1. GRADATION REQUIREMENT TABLE
SIEVE ANALYSIS % PASSING
½ in. 100 3/8 in. 70-100 #200 0-16
2.Pumice is not accepted. All Cinders shall be sandy non-plastic
G. CHIP STONE
Washed 3/8 inch and 1/2 inch uniformly graded specification meeting New Mexico Department of Transportation (NMDOT) or any locality or municipality in the United States having the LA Abrasion and Soundness characteristics shown for Base Course Aggregates in this specification section.
VIII. PAYMENT
1. A Purchase order (PO) will be issued at the onset of each County fiscal year and on a per project basis thereafter, if applicable.
2. Purchases Order(s) are required prior to the delivery of any material under this agreement.
3. No material shall be accepted or delivered prior to certifications by an approved testing laboratory.
4. Payments to vendor will not be processed until said time that invoice and weigh tickets are certified to be correct as a quantity and quality.
5. Payments to vendor will be processed only after the following conditions have been met:
a. Vendor will furnish all applicable weigh tickets with invoice to the
b. County Public Works Division, Operations and Maintenance Department
c. Weigh tickets must have been produced through the use of certified scales.
d. Scales are subject to testing (calibration).
e. Vendor must advise appropriate county personnel as to what scales will be utilized.
PRICING SECTION
RFB # 37-26-BC
BASIS OF AWARD
The County reserves the right to award on an item by item basis, by lot basis, or total bid (all lots) basis depending on which is most advantageous to the County. Final bid award will be made on the lowest, and most responsive bid meeting the specifications. Bidder may bid on one or all bid lots but must bid on all items within the bid lot.
Bids will be evaluated, and contract(s) will be awarded on an item by item, or bid lot or total bid lot basis excluding gross receipts tax (NMGRT). Failure to bid on all items within a bid lot shall result in the automatic rejection of the bid lot. Unit and Haul prices shall exclude gross receipts tax. However, gross receipts tax will be paid on applicable haul services at time of invoice.
BID LOT 1 - BASE COURSE – CRUSHED RECYCLE CONCRETE
UNIT PRICE HAUL PRICE TOTAL PRICE
LOCATION PER TON PER TON (Unit Price plus Haul Price)
SITE A: North Valley Yard, 606 Industrial Road $ $ SITE B: South Valley yard, 1120 Coors Blvd. S.W. $ $ SITE C: Maintenance Complex, 2400 Broadway S.E. $ $ SITE D: North Mountain Yard, 25 Frost Road $ $ SITE E: South Mountain Satellite Yard, 172 HW 217 $ $ SITE F: South Mountain Road Maintenance Yard, 15 South Zamora Road
Base Bid (Total Price of Sites A + B+ C + D + E + F) $______________________
BID LOT 2 - PLASTER / MASONRY SAND
UNIT PRICE HAUL PRICE TOTAL PRICE
LOCATION PER TON PER TON (Unit Price plus
Haul Price) Pick up by County staff $ N/A
Base Bid (Total Price of Sites A + B+ C + D + E + F) $______________________
BID LOT 3 – CRUSHED RED SCORIA- CINDERS
UNIT PRICE HAUL PRICE TOTAL PRICE
LOCATION PER TON PER TON (Unit Price plus
Haul Price) SITE A: North Valley Yard, 606 Industrial Road $ $ SITE B: South Valley Yard, 1120 Coors Blvd. S.W. $ $ SITE C: Maintenance Complex, 2400 Broadway S.E. $ $ SITE D: North Mountain Yard, 25 Frost Road $ $ SITE E: South Mountain Satellite Yard, 172 HW 217 $ $ SITE F: South Mountain Road Maintenance Yard, 15 South Zamora Road
Base Bid (Total Price of Sites A + B+ C + D + E + F) $______________________
BID LOT 4 –3/8 INCH CHIP STONE
UNIT PRICE HAUL PRICE TOTAL PRICE
LOCATION PER TON PER TON (Unit Price plus Haul Price)
SITE A: North Valley Yard, 606 Industrial Road $ $ SITE B: South Valley Yard, 1120 Coors Blvd. S.W. $ $ SITE C: Maintenance Complex, 2400 Broadway S.E. $ $ SITE D: North Mountain Yard, 25 Frost Road $ $ SITE E: South Mountain Satellite Yard, 172 HW 217 $ $ SITE F: South Mountain Road Maintenance Yard, 15 South Zamora Road
Base Bid (Total Price of Sites A + B+ C + D + E + F) $______________________
BID LOT 5 –1/2 INCH CHIP STONE
UNIT PRICE HAUL PRICE TOTAL PRICE
LOCATION PER TON PER TON (Unit Price plus Haul Price)
SITE A: North Valley Yard, 606 Industrial Road $ $ SITE B: South Valley Yard, 1120 Coors Blvd. S.W. $ $ SITE C: Maintenance Complex, 2400 Broadway S.E. $ $ SITE D: North Mountain Yard, 25 Frost Road $ $ SITE E: South Mountain Satellite Yard, 172 HW 217 $ $ SITE F: South Mountain Road Maintenance Yard, 15 South Zamora Road
Base Bid (Total Price of Sites A + B+ C + D + E + F) $_____________________
TOTAL BID – LOTS 1-5: $_____________________
DRAFT PRICE AGREEMENT
THIS AGREEMENT, made and entered into this _________day of _________________, 2026, by and between the County of Bernalillo, New Mexico, a political subdivision in the State of New Mexico, (hereinafter referred to as the "County"), and ________________________________________, (hereinafter referred to as the "Contractor").
WITNESSED:
WHEREAS, the County issued a Request for Bids for On-Demand Road Maintenance Aggregates, RFB No.37-26-BC, attached hereto as Exhibit A; and
WHEREAS, the Contractor submitted its Bid, dated _____________ 2026, in response to RFB No.37- 26-BC, attached hereto as Exhibit B; and
WHEREAS, the County desires to engage the Contractor to render certain goods in connection therewith, and the Contractor is willing to provide such goods.
NOW, THEREFORE, in consideration of the premises and mutual obligations herein, the parties hereto do mutually agree as follows:
1. Scope of Work
As set forth in the Scope of Work section of RFB No. 37-26-BC attached hereto as Exhibit A and incorporated herein by reference and made a part of this Agreement. (OR) attached hereto as Exhibit A as supplemented by Exhibit B both of which are incorporated herein by reference and made a part of this Agreement.
2. Term
This Agreement shall become effective upon the date of final execution and shall continue for a four
(4) year period with an option to extend for an additional one (1) year period unless terminated by either party pursuant to the termination provisions contained in this Agreement.
3. Use of Contract
With the consent of the Contractor, other Central Purchasing Departments (NMSA 1978, §13-1-129) may purchase under this Agreement, provided that the goods are under the same terms and conditions as stated herein, unless a lower price is agreed to between the Central Purchasing Department and the Contractor.
4. Termination for Cause
If, through any cause, the Contractor fails to fulfill the Contractor’s obligations under this Agreement in a timely and proper manner, or if the Contractor violates any of the covenants, agreements or stipulations of any part of this Agreement, the County shall have the right to cancel the Agreement.
The County reserves the right to recover any excess cost incurred by the repurchase by deduction from an unpaid balance due to the Contractor, or any other legal method. Cancellation shall be done by giving written Notice of Cancellation to the Contractor. The Notice of Cancellation shall include the effective date of cancellation.
The official address of the County is: The official address of the Contractor is:
Bernalillo County Procurement & Business Services ______________________________ 415 Silver Ave. SW, 6th Floor ______________________________ Albuquerque, NM 87102 ______________________________
5. Termination for Lack of Appropriations
The terms of this Agreement are contingent upon the County Commission making the appropriations and authorizations necessary for the performance of this Agreement. If sufficient appropriations and authorizations are not made by the County Commission, this Agreement shall terminate upon written notice being given by the County to the Contractor. The County decision as to whether sufficient appropriations are available shall be accepted by the Contractor and shall be final.
6. Termination for Convenience of County
The County may terminate this Agreement at any time by giving at least thirty (30) calendar days notice in writing to the Contractor. If the Agreement is terminated by the County as provided herein, the Contractor will be paid in the amount which bears the same ratio to the total compensation as the services actually performed bear to the total services of the Contractor covered by this Agreement, less payments previously made.
7. Termination by Contractor
The Contractor may terminate this Agreement on an annual basis at the expiration of each year of the term of this Agreement by giving written notice to the County at the address listed herein at least sixty
(60) calendar days prior to the expiration of each year of the term of this Agreement. The expiration of each year for termination purposes shall be defined as 365 days from the date of execution of this Agreement and every 365 days thereafter for the term of this Agreement.
8. Compensation and Method of Payment
A. The County will pay to the Contractor in full payment at the rates listed in Exhibit ___, attached hereto, plus applicable New Mexico Gross Receipts Tax, which constitutes full and complete compensation for the Contractor’s services under this Agreement, including all expenditures made and expenses incurred by the Contractor in performing such services.
B. Method of Payment: Upon completion of work in a manner satisfactory to the County, and upon receipt by the County of a properly documented invoice, payment to the Contractor will be made within thirty (30) days from receipt of the invoice. Except as otherwise agreed to, late payment charges may be assessed against the County in the amount and under the conditions set forth in County Ordinance §2-381.
C. Invoices shall be mailed, faxed, or e-mailed to: Bernalillo County Accounts Payable Office, 415 Silver Ave. SW, 6th Floor, Albuquerque, New Mexico 87102, Fax Number (505-468-7201) or E- Mail Address: accountspayable@bernco.gov.
9. Independent Contractor
Neither the Contractor nor its employees are considered to be employees of the County for any purpose whatsoever. The Contractor is considered to be an Independent Contractor at all times in the performance described herein. The Contractor further agrees that neither it nor its employees are entitled to any benefits from the County under the provisions of the Worker's Compensation Act of the State of New Mexico, or to any of the benefits granted to employees. The Contractor shall not accrue leave, retirement, workers’ compensation benefits, insurance, bonding, use of County vehicles, or any other benefits afforded to employees of the County, as a result of this Agreement. The County shall provide no liability coverage to the Contractor. The Contractor acknowledges that all sums received hereunder are reportable by it for income tax purposes as applicable for self-employment or business income, and New Mexico Gross Receipts Tax, as applicable.
10. Personnel
A. The Contractor represents that it has, or will secure at its own expense, all personnel required in performing the Scope of work as described under this Agreement. Such personnel shall not be employees of or have any contractual relationships with the County.
B. The Scope of work required hereunder will be performed by the Contractor or under its supervision and all personnel engaged in performing the Scope of work shall be fully qualified and shall be authorized or permitted under federal, state and local laws to perform such Scope.
C. None of the Scope of Work covered by this Agreement shall be subcontracted without the prior written approval of the County. Any portion of the Scope of Work subcontracted hereunder shall be specified by written contract or agreement and shall be subject to each provision of this Agreement.
11. Indemnity
The Contractor shall defend, indemnify and forever hold and save the County, its elected officials and employees harmless against any and all suits, causes of action, claims, liabilities, damages, losses and reasonable attorneys’ fees and all other expenses of any kind from any source which may arise out of this Agreement or any amendment hereto, if caused by the negligent act, error, or omission, or intentional act, error, or omission of the Contractor, its officers, employees, servants or agents.
12. Insurance
Prior to the commencement of the work to be performed under this Agreement, and until final acceptance by Bernalillo County or work covered, the Contractor shall procure and maintain at the Contractor’s expense, insurance coverages and limits shown below. This insurance shall be provided by insurance company authorized to do business in the State of New Mexico and in good standings based on the A.M. Best rating of A- or better or the Standards and Poors’ rating of AA or better. Said polices shall cover all cover the services and operations under this contract or agreement whether performed by the Contractor, the Contractor’s agents, employees or by a subcontractor authorized by the contractor with a current Certificate of Insurance provided to the Contractor and listing the County as an “additional insured” and maintaining it for the duration of this agreement. All insurance shall remain in full force and effect for the entire period of the work, up to and including final acceptance and the removal of all equipment and employees, agents and subcontracts therefrom, or as otherwise indicated in this Agreement. Where required in this Agreement, an Additional Insured Endorsement Form shall be supplied with each Certificate of Insurance.
A. Commercial General Liability, which shall be written on an occurrence form with coverage at least as broad as a standard ISO CG 00 01 occurrence form, including operations, products and completed operations, and contractual liability with limits not less than:
$1,000,000 Per Occurrence $2,000,000 Aggregate $2,000,000 Prod & Completed Operations $2,000,000 Aggregate
1. The Commercial General Liability Coverage shall include the following endorsements:
a. The County, its officials, agents, and employees shall be included as Additional Insureds (“Additional Insureds”) using ISO Additional Insured endorsements CG 20 10 (ongoing operations) and CG 20 37 (completed operations) or a blanket additional insured endorsement. If the blanket additional insured endorsement is used, premises and operations as well as products-completed operations coverage must be provided for the Additional Insureds
b. A Waiver of…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .