2. Statement of Work - B7510 Dust Collector.pdf

28 LRS/LGRDDC Dust Collector System

Demo/remove existing dust collector system and all existing duct. Prepare site/facility for new dust collector system installation. New dust collecting system will be installed outside of bldg. 7510. Run new duct from equipment to dust collecting system. Contractor will ensure the system operates/performers as specified by the manufacture.

Statement of work info:

I. SCOPE: Provide a complete and functional dust collector system:

• Demo Work -Disconnect and demo existing power as required -Demo existing dust collector and associated duct -Properly dispose of existing dust collector and associated material

• Site Preparation -Provide a new 12’x14’ concrete slab for dust collector adjacent to BLDG 7510 -Masonry openings for:

-Dust collector duct -Electrical -Fireprotection

-Exterior insulation – finish system repair and paint repair as it pertains to the dust collector system -Relocate electrical feed for new dust collector -Supply and install fire alarm shutdown relay and programming -Fire protection to connect to existing fire main as required per dust collector shop drawings

-Provide and install dry valve system to protect dust collector

• Dust Collector System -Provide and install dust collector system -Provide and install dust collector ducting per customer requirements

-Approximately 200 ft of dust collector ductwork plus drop length

▪ Drops:

-Two (2) floor sweeps -One (1) drop for radial arm saw -One (1) drop for rip saw -One (1) drop for band saw -One (1) drop for miter saw -One (1) drop for table saw -One (1) drop for CNC router

22 November 2022