2. FA466125Q0105 Sailent Characteristics.docx
DOCX document 38 KB Posted
- Attached to
- CX300 Communications Service Monitors With Adaptations Federal contract opportunity
- Solicitation number
- FA466125Q0105
About this file
This document is a detailed specification sheet for a Viavi CX300 Communications Service Monitor, issued under Solicitation Number FA466125Q0105 by the Department of the Air Force Global Strike Command at Dyess AFB. The solicitation is for a single-source purchase order of specialized radio communications testing equipment, including one Viavi CX300 Communications Service Monitor, calibration kits, a hard carrying case, and Testforce CM300/350 Kits with approved procedures and technical data. The communications monitor offers comprehensive radio testing capabilities, supporting AM/FM/PM/SSB standards, and can test Ground to Air radios by measuring RF power, frequency error, AM Peak Envelope Power, and receiver sensitivity, with optional ILS system testing functionality.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| RFQ FA466125Q0105.docx | DOCX document | |
| 1. FA466125Q0105 Provisions and Clauses.pdf | ||
| 3. Single Source JA_Redacted.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
ITEM
NUMBER
| Description |
| QUANTITY |
| UNIT |
| 0001 |
| Viavi CX300 Communications Service Monitor: |
• Functionality: Radio communications testing capabilities for the installation, activation, and maintenance of USAF RAWS systems.
• Key Features:
· Supports AM/FM/PM/SSB standard.
· Supports testing of CM300/350 and other Ground to Air radios.
· Measures RF power, frequency error, AM Peak Envelope Power, Receiver Sensitivity.
· Optionally Supports testing of ILS system using S21 Amplitude and Phase S-Parameters.
· Phase noise of:
· <-112 dBc/Hz @ 10 kHz offset, RF @500 MHz;
· <-110 dBc/Hz @ 10 kHz offset, RF @1 GHz
· Integrated GPS receiver for high accuracy time base discipline for RF frequency error measurements.
· Supports onboard AFFSA approved test procedures for the CM300/350 radios.
| 1 |
| EA |
| 0002 |
| Viavi CX300-SCAA |
• Functionality: Adds Cable and Antenna Analysis (SCAA) capabilities to the CX300, enabling Distance-to-Fault (DTF), Voltage Standing Wave Ratio (VSWR), and Return Loss (RL) measurements.
• Key Features:
· Identifies faults and degradations in antenna feedlines and coaxial cables.
· Measures VSWR to ensure proper impedance matching and minimize signal loss.
· Provide DTF analysis to locate cable breaks, water ingress, or damaged connectors.
| 1 |
| EA |
| 0003 |
| Viavi CX300-ASOL |
• Functionality: Provides known impedance conditions (Open, Short, and Load) to calibrate the test setup and ensure accurate RF measurements.
• Key Features:
· Used for Calibrating the VNA function.
· Eliminate measurement errors caused by cable losses and test setup inconsistencies.
· Essential for accurate RF device and antenna system testing.
| 1 |
| EA |
| 0004 |
| Viavi CX300-ACH (Hard Carrying Case) |
• Functionality: A durable hard carrying case designed to protect the Viavi CX300
• Key Features:
· Rugged, impact-resistant design to prevent damage in the field.
· Custom foam inserts for secure storage of the CX300, cables, and accessories
| 1 |
| EA |
| 0005 |
| Testforce USAF – CM300/350 Kit |
• Functionality: Test and Alignment Procedures and Predefined Software setup Files to test the CM300/350 radios.
• Key Features:
· Resides on the CX300
· Includes: Cable-Adaptor Kit for CM300/CM350 Testing, troubleshooting, and alignment.
| 1 |
| EA |
File details come from the government source that posted it. Updated .