2. Clauses and Provisions.pdf

DOCUMENT NUMBER

FA857126Q0028

CLAUSES INCORPORATED BY REFERENCE

CLAUSE

NO

ALT NO/

DEV NO

CLAUSE TITLE YEAR-

MO

SECTION

252.203-7000 Requirements Relating to Compensation of Former DoD Officials.

2011-09 SEC I

252.203-7002 Requirement to Inform Employees of Whistleblower Rights. 2022-12 SEC I

252.203-7005 Representation Relating to Compensation of Former DoD Officials.

2022-09 SEC K

252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services.

2023-01 SEC I

252.204-7024 Notice on the Use of the Supplier Performance Risk System. 2023-03 SEC L 252.223-7008 Prohibition of Hexavalent Chromium. 2023-01 SEC I 252.225-7001 Buy American and Balance of Payments Program. 2024-02 SEC I 252.225-7002 Qualifying Country Sources as Subcontractors. 2022-03 SEC I 252.225-7012 Preference for Certain Domestic Commodities. 2022-04 SEC I

252.225-7055 Representation Regarding Business Operations with the Maduro Regime.

2022-05 SEC K

252.225-7056 Prohibition Regarding Business Operations with the Maduro Regime.

2023-01 SEC I

252.225-7059 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region-Representation.

2023-06 SEC K

252.225-7060 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region.

2023-06 SEC I

252.232-7003 Electronic Submission of Payment Requests and Receiving Reports.

2018-12 SEC G

252.232-7010 Levies on Contract Payments. 2006-12 SEC I

252.244-7000 Subcontracts for Commercial Products or Commercial Services.

2023-11 SEC I

252.247-7023 Transportation of Supplies by Sea. 2024-10 SEC I 52.201-1 Acquisition 360: Voluntary Survey. 2023-09 SEC L 52.204-13 System for Award Management Maintenance. 2018-10 SEC I 52.204-16 Commercial and Government Entity Code Reporting. 2020-08 SEC L 52.204-18 Commercial and Government Entity Code Maintenance. 2020-08 SEC I 52.204-7 System for Award Management. 2024-11 SEC L

52.212-1 Instructions to Offerors-Commercial Products and Commercial Services.

2023-09 SEC L

52.212-4 Contract Terms and Conditions-Commercial Products and Commercial Services.

2023-11 SEC I

52.223-5 Pollution Prevention and Right-to-Know Information. 2024-05 SEC I

252.237-7010 Prohibition on Interrogation of Detainees by Contractor Personnel.

2023-01 SEC I

252.246-7004 Safety of Facilities, Infrastructure, and Equipment for Military Operations.

2010-10 SEC I

52.209-10 Prohibition on Contracting with Inverted Domestic Corporations.

2015-11 SEC I

52.222-3 Convict Labor. 2003-06 SEC I

52.204-19 Incorporation by Reference of Representations and Certifications.

2014-12 SEC I

52.204-22 Alternative Line Item Proposal. 2017-01 SEC L 52.232-39 Unenforceability of Unauthorized Obligations. 2013-06 SEC I

252.225-7048 Export-Controlled Items. 2013-06 SEC I Basic Safeguarding of Covered Contractor Information

52.204-21 Systems. 2021-11 SEC I 52.247-34 F.o.b. Destination. 1991-01 SEC F 52.233-1 Disputes. 2014-05 SEC I 52.243-1 Changes-Fixed-Price. 1987-08 SEC I

252.204-7019 Notice of NIST SP 800-171 DoD Assessment Requirements. 2023-11 SEC L 252.204-7020 NIST SP 800-171 DoD Assessment Requirements. 2023-11 SEC I

52.209-6 Protecting the Government's Interest When Subcontracting

With Contractors Debarred, Suspended, Proposed for Debarment, or Voluntarily Excluded

2025-01 SEC I

52.222-19 Child Labor-Cooperation with Authorities and Remedies. 2025-01 SEC I

252.204-7012 DEV 2024-O0013 Safeguarding Covered Defense Information and Cyber Incident Reporting. (DEVIATION 2024-O0013 REVISION 1)

2024-05 SEC I

252.225-7972 DEV 2024-O0014 Prohibition on the Procurement of Foreign-Made Unmanned Aircraft Systems. (DEVIATION 2024-O0014)

2024-08 SEC I

252.225-7966 DEV 2024-O0006

Prohibition Regarding Russian Fossil Fuel Business

Operations-Representation (Deviation 2024-O0006, Revision 1)

2024-03 SEC K

252.225-7967 DEV 2024-O0006 Prohibition Regarding Russian Fossil Fuel Business Operations (Deviation 2024-O0006, Revision 1)

2024-02 SEC I

252.225-7973 DEV 2024-O0014

Prohibition on the Procurement of Foreign-Made Unmanned

Aircraft Systems—Representation. (DEVIATION 2024- O0014)

2024-08 SEC K

52.244-6 DEV 2025-O0003 Subcontracts for Commercial Products and Commercial Services. (DEVIATION 2025-O0003)

2025-03 SEC I

CLAUSES IN FULL TEXT

CLAUSE

NO

CLAUSE TITLE ALT NO/

DEV NO

YEAR-

MO

CLAUSE TEXT

52.204-29 Federal Acquisition Supply Chain Security Act Orders-

Representation and Disclosures.

2023-12

Federal Acquisition Supply Chain Security Act Orders-Representation and Disclosures (Dec 2023)

(a) As used in this provision, Definitions. Covered article, FASCSA order, Intelligence community, National security system, Reasonable inquiry, Sensitive compartmented information, Sensitive and have the meaning provided in the clause 52.204-30, compartmented information system, Source Federal Acquisition Supply Chain Security Act Orders-Prohibition.

(b) Contractors are prohibited from providing or using as part of the performance of theProhibition.

contract any covered article, or any products or services produced or provided by a source, if the prohibition is set out in an applicable Federal Acquisition Supply Chain Security Act (FASCSA) order, as described in paragraph (b)(1) of FAR 52.204-30, Federal Acquisition Supply Chain Security Act Orders-Prohibition.

.(c) Procedures

(1) The Offeror shall search for the phrase "FASCSA order" in the System for Award Management (SAM)( for any covered article, or any products or services produced or provided https://www.sam.gov) by a source, if there is an applicable FASCSA order described in paragraph (b)(1) of FAR 52.204-30, Federal Acquisition Supply Chain Security Act Orders-Prohibition.

(2) The Offeror shall review the solicitation for any FASCSA orders that are not in SAM, but are effective and do apply to the solicitation and resultant contract (see FAR 4.2303(c)(2)).

(3) FASCSA orders issued after the date of solicitation do not apply unless added by an amendment to the solicitation.

(d) By submission of this offer, the offeror represents that it has conducted aRepresentation.

reasonable inquiry, and that the offeror does not propose to provide or use in response to this solicitation any covered article, or any products or services produced or provided by a source, if the covered article or the source is prohibited by an applicable FASCSA order in effect on the date the solicitation was issued, except as waived by the solicitation, or as disclosed in paragraph (e).

(e) The purpose for this disclosure is so the Government may decide whether to issue aDisclosures.

waiver. For any covered article, or any products or services produced or provided by a source, if the covered article or the source is subject to an applicable FASCSA order, and the Offeror is unable to represent compliance, then the Offeror shall provide the following information as part of the offer:

(1) Name of the product or service provided to the Government;

(2) Name of the covered article or source subject to a FASCSA order;

(3) If applicable, name of the vendor, including the Commercial and Government Entity code and unique entity identifier (if known), that supplied the covered article or the product or service to the Offeror;

(4) Brand;

(5) Model number (original equipment manufacturer number, manufacturer part number, or wholesaler number);

(6) Item description;

(7) Reason why the applicable covered article or the product or service is being provided or used;

(f) The contracting officer will review disclosures provided inExecutive agency review of disclosures.

paragraph (e) to determine if any waiver may be sought. A contracting officer may choose not to pursue a waiver for covered articles or sources otherwise subject to a FASCSA order and may instead make an award to an offeror that does not require a waiver.

(End of provision)

252.204-7017 Prohibition on the Acquisition of Covered Defense

Telecommunications Equipment or Services-Representation.

2021-05

PROHIBITION ON THE ACQUISITION OF COVERED DEFENSE TELECOMMUNICATIONS

EQUIPMENT OR SERVICES-REPRESENTATION (MAY 2021)

The Offeror is not required to complete the representation in this provision if the Offeror has represented in the provision at 252.204-7016, Covered Defense Telecommunications Equipment or Services-Representation, that it "does not provide covered defense telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument."

(a) . "Covered defense telecommunications equipment or services," "covered mission,"Definitions "critical technology," and "substantial or essential component," as used in this provision, have the meanings given in the 252.204-7018 clause, Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services, of this solicitation.

(b) . Section 1656 of the National Defense Authorization Act for Fiscal Year 2018Prohibition (Pub. L. 115-91) prohibits agencies from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service to carry out covered missions that uses covered defense telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system.

(c) . The Offeror shall review the list of excluded parties in the System for AwardProcedures Management (SAM) at for entities that are excluded when providing any https://www.sam.gov equipment, system, or service to carry out covered missions that uses covered defense telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system, unless a waiver is granted.

(d) . If in its annual representations and certifications in SAM the Offeror hasRepresentation represented in paragraph (c) of the provision at 252.204-7016, Covered Defense Telecommunications Equipment or Services-Representation, that it "does" provide covered defense telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument, then the Offeror shall complete the following additional representation:

The Offeror represents that it will will not provide covered defense telecommunications equipment or services as a part of its offered products or services to DoD in the performance of any award resulting from this solicitation.

(e) . If the Offeror has represented in paragraph (d) of this provision that it "willDisclosures provide covered defense telecommunications equipment or services," the Offeror shall provide the following information as part of the offer:

(1) A description of all covered defense telecommunications equipment and services offered (include brand or manufacturer; product, such as model number, original equipment manufacturer (OEM) number, manufacturer part number, or wholesaler number; and item description, as applicable).

(2) An explanation of the proposed use of covered defense telecommunications equipment and services and any factors relevant to determining if such use would be permissible under the prohibition referenced in paragraph (b) of this provision.

(3) For services, the entity providing the covered defense telecommunications services (include entity name, unique entity identifier, and Commercial and Government Entity (CAGE) code, if known).

(4) For equipment, the entity that produced or provided the covered defense telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the OEM or a distributor, if known).

(End of provision)

252.211-7003 Item Unique Identification and Valuation. 2023-01

ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)

(a) . As used in this clause-Definitions

"Automatic identification device" means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

"Concatenated unique item identifier" means-

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier;

original part, lot, or batch number; and serial number within the original part, lot, or batch number.

"Data matrix" means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO) /International Electrotechnical Commission (IEC) 16022.

"Data qualifier" means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

"DoD recognized unique identification equivalent" means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at .https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html

"DoD item unique identification" means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.

" " means the entity (e.g., a manufacturer or vendor) responsible for assigning Enterprise unique item identifiers to items.

" identifier" means a code that is uniquely assigned to an enterprise by an issuing Enterprise agency.

"Government's unit acquisition cost" means-

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery; and

(3) For items produced under a time-and-materials contract, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery.

"Issuing agency" means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459.

"Issuing agency code" means a code that designates the registration (or controlling) authority for the enterprise identifier.

"Item" means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.

" or batch number" means an identifying number assigned by the enterprise to a Lot designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

"Machine-readable" means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

"Original part number" means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.

"Parent item" means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

"Serial number within the enterprise identifier" means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.

"Serial number within the part, lot, or batch number" means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.

"Serialization within the enterprise identifier" means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again.

The enterprise is responsible for ensuring unique serialization within the enterprise identifier.

"Serialization within the part, lot, or batch number" means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment.

The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

"Type designation" means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.

"Unique item identifier" means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.

"Unique item identifier type" means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at .https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html

(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.

(c) Unique item identifier.

(1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government's unit acquisition cost is $5,000 or more, except for the following line items:

Contract Line, Subline, or

Exhibit Line Item Number Item Description

(ii) Items for which the Government's unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:

Contract Line, Subline, or

Exhibit Line Item Number Item Description

(If items are identified in the Schedule, insert "See Schedule in this table.)

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number .____

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number .____

(v) Any item not included in (i), (ii), (iii), or (iv) for which the contractor creates and marks a unique item identifier for traceability.

(2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor.

(3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology - International symbology specification - Data matrix; ECC200 data matrix specification.

(4) The Contractor shall ensure that-Data syntax and semantics of unique item identifiers.

(i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor:

(A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary;

and

(ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology - Transfer Syntax for High Capacity Automatic Data Capture Media.

(5) .Unique item identifier

(i) The Contractor shall-

(A) Determine whether to-

Serialize within the enterprise identifier;(1)

Serialize within the part, lot, or batch number; or(2)

Use a DoD recognized unique identification equivalent (e.g. Vehicle(3) Identification Number); and

(B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL-STD-130, Identification Marking of U.S. Military Property, latest version;

(C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of MIL-STD-129, Military Marking for Shipment and Storage, latest version; and

(D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-130, latest version.

(ii) The issuing agency code-

(A) Shall not be placed on the item; and

(B) Shall be derived from the data qualifier for the enterprise identifier.

(d) For each item that requires item unique identification under paragraph (c)(1)(i), (ii), or (iv) of this clause or when item unique identification is provided under paragraph (c)(1)(v), in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material Inspection and Receiving Report, the following information:

(1) Unique item identifier.

(2) Unique item identifier type.

(3) Issuing agency code (if concatenated unique item identifier is used).

(4) identifier (if concatenated unique item identifier is used).Enterprise

(5) Original part number (if there is serialization within the original part number).

(6) or batch number (if there is serialization within the lot or batch number).Lot

(7) Current part number (optional and only if not the same as the original part number).

(8) Current part number effective date (optional and only if current part number is used).

(9) Serial number (if concatenated unique item identifier is used).

(10) Government's unit acquisition cost.

(11) Unit of measure.

(12) Type designation of the item as specified in the contract schedule, if any.

(13) Whether the item is an item of Special Tooling or Special Test Equipment.

(14) Whether the item is covered by a warranty.

(e) For embedded subassemblies, components, and parts that require DoD item unique identification under paragraph (c)(1)(iii) of this clause or when item unique identification is provided under paragraph (c)(1)(v), the Contractor shall report as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the following information:

(1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part.

(2) Unique item identifier of the embedded subassembly, component, or part.

(3) Unique item identifier type.**

(4) Issuing agency code (if concatenated unique item identifier is used).**

(5) identifier (if concatenated unique item identifier is used).**Enterprise

(6) Original part number (if there is serialization within the original part number).**

(7) or batch number (if there is serialization within the lot or batch number).**Lot

(8) Current part number (optional and only if not the same as the original part number).**

(9) Current part number effective date (optional and only if current part number is used).**

(10) Serial number (if concatenated unique item identifier is used).**

(11) Description.

** Once per item.

(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:

(1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site /uidregistry/.

(2) Embedded items shall be reported by one of the following methods-

(i) Use of the embedded items capability in WAWF;

(ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/; or

(iii) Via WAWF as a deliverable attachment for exhibit line item number (fill in) ,____ Unique Item Identifier Report for Embedded Items, Contract Data Requirements List, DD Form 1423.

(g) . If the Contractor acquires by subcontract, any item(s) for which item uniqueSubcontracts identification is required in accordance with paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s), including subcontracts for commercial products or commercial services.

(End of clause)

252.225-7000 Buy American--Balance of Payments Program Certificate. 2024-02

BUY AMERICAN-BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024)

(a) Definitions. "Commercially available off-the-shelf (COTS) item," "component," "critical component," "critical item," "domestic end product," "foreign end product," "qualifying country," "qualifying country end product," and "United States," as used in this provision, have the meanings given in the 252.225-7001, Buy American and Balance of Payments Program-Basic clause of this solicitation.

(b) The Government-Evaluation.

(1) Will evaluate offers in accordance with the policies and procedures of Part 225 of the Defense Federal Acquisition Regulation Supplement; and

(2) Will evaluate offers of qualifying country end products without regard to the restrictions of the Buy American statute or the Balance of Payments Program.

(c) Certifications and identification of country of origin.

(1) For all line items subject to the Buy American and Balance of Payments Program-Basic clause of this solicitation, the Offeror certifies that-

(i) Each end product, except those listed in paragraphs (c)(2) or (3) of this provision, is a domestic end product and that each domestic end product listed in paragraph (c)(4) of this provision contains a critical component or a critical item; and

(ii) For end products other than COTS items, components of unknown origin are considered to have been mined, produced, or manufactured outside the or a qualifying United States country. For those end products that do not consist wholly or predominantly of iron or steel or a combination of both, the Offeror shall also indicate whether these foreign end products exceed 55 percent domestic content, except for those that are COTS items. If the percentage of the domestic content is unknown, select "no".

(2) The Offeror certifies that the following end products are qualifying country end products:

Line Item Number Country of Origin

(3) The following end products are other foreign end products, including end products manufactured in the United States that do not qualify as domestic end products. For those foreign end products that do not consist wholly or predominantly of iron or steel or a combination of both, the Offeror shall also indicate whether these foreign end products exceed 55 percent domestic content, except for those that are COTS items. If the percentage of the domestic content is unknown, select "no".

Line Item Number Country of Origin

(If known) Exceeds 55% Domestic Content (yes

/no)

(4) The Offeror shall separately list the line item numbers of domestic end products that contain a critical component or a critical item (see Federal Acquisition Regulation 25.105).

Domestic end products containing a critical component or a critical item:

Line Item Number ____

[List as necessary]

(End of provision)

252.232-7006 Wide Area WorkFlow Payment Instructions. 2023-01

WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)

(a) As used in this clause-Definitions.

"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization.

"Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

"Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system.

"Payment request" and "receiving report" are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) The WAWF system provides the method to electronically processElectronic invoicing.

vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) To access WAWF, the Contractor shall-WAWF access.

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) The Contractor should follow the training instructions of the WAWF Web-WAWF training.

Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/

(e) Document submissions may be via web entry,WAWF methods of document submission.

Electronic Data Interchange, or File Transfer Protocol.

(f) The Contractor shall use the following information whenWAWF payment instructions.

submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:

(1) The Contractor shall submit payment requests using the followingDocument type.

document type(s):

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items-

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

Combo

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

N/A

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial financing, submit a commercial financing request.

(2) ) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF Data to be entered in WAWF

Pay Official DoDAAC F03000

Issue By DoDAAC FA8571

Admin DoDAAC FA8571

Inspect By DoDAAC FE2067

Ship To Code FE2067

Ship From Code N/A

Mark For Code N/A

Service Approver (DoDAAC) F3QCCM

Service Acceptor (DoDAAC) F3QCCM

Accept at Other DoDAAC N/A

LPO DoDAAC N/A

DCAA Auditor DoDAAC N/A

Other DoDAAC(s) N/A

(4) Payment request. The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) Receiving report. The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

Willie Johnson, willie.johnson.5@us.af.mil, 478-472-1865

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

(End of clause)

52.212-5 Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Products and Commercial Services.

2025-10

Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Products and Commercial Services (Oct 2025)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (section 743 of Division E, Title VII, of the Consolidated and Further Continuing (JAN 2017)

Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities (Section 1634 of Pub. L. 115-91).(DEC 2023)

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Section 889(a)(1)(A) of Pub. L. 115-232).(NOV 2021)

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations .(NOV 2015)

(5) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (31 U.(MAR 2023) S.C. 3903 and 10 U.S.C. 3801).

(6) 52.233-3, Protest After Award (31 U.S.C. 3553).(AUG 1996)

(7) 52.233-4, Applicable Law for Breach of Contract Claim (Public Laws 108-77 and(OCT 2004) 108-78 ( 19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

[ .]Contracting Officer check as appropriate

52.203-6, Restrictions on Subcontractor Sales to the Government with (1) (JUN 2020), Alternate I (41 U.S.C. 4704 and 10 U.S.C. 4655). (NOV 2021)

52.203-13, Contractor Code of Business Ethics and Conduct (41 U.S.C. 3509)).(2) (NOV 2021)

52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009(3) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery(JUN 2010) and Reinvestment Act of 2009.)

52.203-17, Contractor Employee Whistleblower Rights (41 U.S.C. 4712); this clause(4) (NOV 2023) does not apply to contracts of DoD, NASA, the Coast Guard, or applicable elements of the intelligence community-see FAR 3.900(a).

52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Pub.(5) (JUN 2020) L. 109-282) ( 31 U.S.C. 6101 note).

[Reserved].(6)

52.204-14, Service Contract Reporting Requirements (Pub. L. 111-117, section 743 of(7) (OCT 2016) Div. C).

52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (8) (OCT 2016) (Pub. L. 111-117, section 743 of Div. C).

52.204-27, Prohibition on a ByteDance Covered Application (Section 102 of Division R(9) (JUN 2023) of Pub. L. 117-328).

52.204-28, Federal Acquisition Supply Chain Security Act Orders-Federal Supply Schedules,(10) Governmentwide Acquisition Contracts, and Multi-Agency Contracts. (Pub. L. 115-390,(DEC 2023) title II).

(11)

(i) 52.204-30, Federal Acquisition Supply Chain Security Act Orders-Prohibition. (Pub.(DEC 2023) L. 115-390, title II).

Alternate I of 52.204-30.(ii) (DEC 2023)

52.209-6, Protecting the Government's Interest When Subcontracting With Contractors Debarred,(12) Suspended, Proposed for Debarment, or Voluntarily Excluded. ( 2025) (31 U.S.C. 6101 note).JAN

52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (13) (OCT 2018) (41 U.S.C. 2313).

[Reserved].(14)

52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award ( ) (15 U.S.C. 657a).(15) OCT 2022

52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns ((16) OCT ) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).2022

[Reserved](17)

(18)

(i) 52.219-6, Notice of Total Small Business Set-Aside (15 U.S.C. 644).(NOV 2020)

Alternate I of 52.219-6.(ii) (MAR 2020)

(19)

(i) 52.219-7, Notice of Partial Small Business Set-Aside (15 U.S.C. 644).(NOV 2020)

Alternate I of 52.219-7.(ii) (MAR 2020)

52.219-8, Utilization of Small Business Concerns ( )(15 U.S.C. 637(d)(2) and (3)).(20) JAN 2025

(21)

(i) 52.219-9, Small Business Subcontracting Plan ( ) (15 U.S.C. 637(d)(4)).JAN 2025

Alternate I of 52.219-9.(ii) (NOV 2016)

Alternate II of 52.219-9.(iii) (NOV 2016)

Alternate III of 52.219-9.(iv) (JUN 2020)

Alternate IV ( ) of 52.219-9.(v) JAN 2025

(22)

(i) 52.219-13, Notice of Set-Aside of Orders (15 U.S.C. 644(r)).(MAR 2020)

Alternate I of 52.219-13.(ii) (MAR 2020)

52.219-14, Limitations on Subcontracting ( ) (15 U.S.C. 657s).(23) OCT 2022

52.219-16, Liquidated Damages-Subcontracting Plan (15 U.S.C. 637(d)(4)(F)(i)).(24) (SEP 2021)

52.219-27, Notice of Set-Aside for, or Sole-Source Award to, Service-Disabled Veteran-Owned(25) Small Business (SDVOSB) Concerns Eligible Under the SDVOSB Program ( ) (15 U.S.FEB 2024 C. 657f).

(26)

(i) 52.219-28, Postaward Small Business Program Rerepresentation ( ) (15 U.S.C. 632(a)(2)).JAN 2025

Alternate I of 52.219-28.(ii) (MAR 2020)

52.219-29, Notice of Set-Aside for, or Sole-Source Award to, Economically Disadvantaged(27) Women-Owned Small Business Concerns ( ) (15 U.S.C. 637(m)).OCT 2022

52.219-30, Notice of Set-Aside for, or Sole-Source Award to, Women-Owned Small Business(28) Concerns Eligible Under the Women-Owned Small Business Program ( ) (15 U.S.C. 637(m)).OCT 2022

52.219-32, Orders Issued Directly Under Small Business Reserves (15 U.S.C. 644(r)).(29) (MAR 2020)

52.219-33, Nonmanufacturer Rule (15 U.S.C. 637(a)(17)).(30) (SEP 2021)

52.222-3, Convict Labor (E.O. 11755).(31) (JUN 2003)

52.222-19, Child Labor-Cooperation with Authorities and Remedies (E.O. 13126).(32) (JAN 2025)

52.222-21, Prohibition of Segregated Facilities .(33) (APR 2015)

(34)

(i) 52.222-26, Equal Opportunity (E.O. 11246).(SEP 2016)

Alternate I of 52.222-26.(ii) (FEB 1999)

(35)

(i) 52.222-35, Equal Opportunity for Veterans (38 U.S.C. 4212).(JUN 2020)

Alternate I of 52.222-35.(ii) (JUL 2014)

(36)

(i) 52.222-36, Equal Opportunity for Workers with Disabilities (29 U.S.C. 793).(JUN 2020)

Alternate I of 52.222-36.(ii) (JUL 2014)

52.222-37, Employment Reports on Veterans ( ) (38 U.S.C. 4212).(37) JUN 2020

52.222-40, Notification of Employee Rights Under the National Labor Relations Act (38) (DEC 2010) (E.O. 13496).

(39)

(i) 52.222-50, Combating Trafficking in Persons (22 U.S.C. chapter 78 and E.O. 13627).( )OCT 2025

Alternate I of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).(ii) (MAR 2015)

52.222-54, Employment Eligibility Verification (Executive Order 12989). (Not(40) (JAN 2025) applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial products or commercial services as prescribed in FAR 22.1803.)

(41)

(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA-Designated Items (May 2008) ( 42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

Alternate I of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of(ii) (MAY 2008) commercially available off-the-shelf items.)

52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons(42) (42 U.S.C. 7671, ).(MAY 2024) et seq.

52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air(43) Conditioners (42 U.S.C. 7671, ).(MAY 2024) et seq.

52.223-20, Aerosols (42 U.S.C. 7671, ).(44) (MAY 2024) et seq.

52.223-21, Foams (42 U.S.C. 7671, ).(45) (MAY 2024) et seq.

52.223-23, Sustainable Products and Services (E.O. 14057, 7 U.S.C. 8102, 42 U.S.C.(46) (MAY 2024) 6962, 42 U.S.C. 8259b, and 42 U.S.C. 7671l).

(47)

(i) 52.224-3 Privacy Training (5 U.S.C. 552 a).(JAN 2017)

Alternate I of 52.224-3.(ii) (JAN 2017)

(48)

(i) 52.225-1, Buy American-Supplies (41 U.S.C. chapter 83).(OCT 2022)

Alternate I of 52.225-1.(ii) (OCT 2022)

(49)

(i) 52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act (19 U.S.C. 3301(NOV 2023) note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, 19 U.S.C. chapter 29 (sections 4501-4732), Public Law 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110- 138, 112-41, 112-42, and 112-43.

Alternate I [Reserved].(ii)

Alternate II of 52.225-3.(iii) (JAN 2025)

Alternate III of 52.225-3.(iv) (FEB 2024)

Alternate IV (Oct 2022) of 52.225-3.(v)

52.225-5, Trade Agreements (19 U.S.C. 2501, ., 19 U.S.C. 3301 note).(50) (NOV 2023) et seq

52.225-13, Restrictions on Certain Foreign Purchases (E.O.'s, proclamations, and(51) (FEB 2021) statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016)(52) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C.

Subtitle A, Part V, Subpart G Note).

52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150).(53)

52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (42 U.(54) (NOV 2007) S.C. 5150).

52.226-8, Encouraging Contractor Policies to Ban Text Messaging While Driving (E.(55) (MAY 2024) O. 13513).

52.229-12, Tax on Certain Foreign Procurements .(56) (FEB 2021)

52.232-29, Terms for Financing of Purchases of Commercial Products and Commercial Services(57)

(41 U.S.C. 4505, 10 U.S.C. 3805).(NOV 2021)

52.232-30, Installment Payments for Commercial Products and Commercial Services (58) (NOV 2021) (41 U.S.C. 4505, 10 U.S.C. 3805).

52.232-33, Payment by Electronic Funds Transfer-System for Award Management (59) (OCT2018) (31 U.S.C. 3332).

52.232-34, Payment by Electronic Funds Transfer-Other than System for Award Management (Jul(60) 2013) (31 U.S.C. 3332).

52.232-36, Payment by Third Party (31 U.S.C. 3332).(61) (MAY 2014)

52.239-1, Privacy or Security Safeguards (5 U.S.C. 552a).(62) (AUG 1996)

52.240-1, Prohibition on Unmanned Aircraft Systems Manufactured or Assembled by American(63) Security Drone Act-Covered Foreign Entities (Sections 1821-1826, Pub. L. 118-31, 41 U.S.(NOV 2024) C. 3901 note prec.).

52.242-5, Payments to Small Business Subcontractors (15 U.S.C. 637(d)(13)).(64) (JAN 2017)

(65)

(i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (46 U.S.(NOV 2021) C. 55305 and 10 U.S.C. 2631).

Alternate I of 52.247-64.(ii) (APR 2003)

Alternate II of 52.247-64.(iii) (NOV 2021)

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

[ ]Contracting Officer check as appropriate.

52.222-41, Service Contract Labor Standards (41 U.S.C. chapter67).(1) (AUG 2018)

52.222-42, Statement of Equivalent Rates for Federal Hires (29 U.S.C. 206 and 41 U.S.(2) (MAY 2014) C. chapter 67).

52.222-43, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment(3) (Multiple Year and Option Contracts) (29 U.S.C. 206 and 41 U.S.C. chapter 67).(AUG 2018)

52.222-44, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (May(4) 2014) ( 29U.S.C.206 and 41 U.S.C. chapter 67).

52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for(5) Maintenance, Calibration, or Repair of Certain Equipment-Requirements (May 2014) (41 U.S.

C. chapter 67).

52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for(6) Certain Services-Requirements (41 U.S.C. chapter 67).(MAY 2014)

52.222-55, Minimum Wages for Contractor Workers Under Executive Order 14026 .(7) (JAN 2022)

52.222-62, Paid Sick Leave Under Executive Order 13706 (E.O. 13706).(8) (JAN 2022)

52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (Jun 2020) (42 U.S.C. 1792).(9)

52.247-69, Reporting Requirement for U.S.-Flag Air Carriers Regarding Training to Prevent(10) Human Trafficking (49 U.S.C. 40118(g)).(JAN 2025)

(d) . The Contractor shall comply with the provisions ofComptroller General Examination of Record this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, as defined in FAR 2.101, on the date of award of this contract, and does not contain the clause at 52.215-2, Audit and Records-Negotiation.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement.

Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

(e)

(1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1), in a subcontract for commercial products or commercial services. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause-

(i) 52.203-13, Contractor Code of Business Ethics and Conduct (41 U.S.C. 3509).(NOV 2021)

(ii) 52.203-17, Contractor Employee Whistleblower Rights (41 U.S.C. 4712).(NOV 2023)

(iii) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(iv) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities (Section 1634 of Pub. L. 115-91).(DEC 2023)

(v) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Section 889(a)(1)(A) of Pub. L. 115-232).(NOV 2021)

(vi) 52.204-27, Prohibition on a ByteDance Covered Application (Section 102 of(JUN 2023) Division R of Pub. L. 117-328).

(vii)

(A) 52.204-30, Federal Acquisition Supply Chain Security Act Orders-Prohibition. (Pub.(DEC 2023) L. 115-390, title II).

(B) Alternate I of 52.204-30.(DEC 2023)

(viii) 52.219-8, Utilization of Small Business Concerns ( ) (15 U.S.C. 637(d)(2) and (3)), inJAN 2025 all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds the applicable threshold specified in FAR 19.702(a) on the date of subcontract award, the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(ix) 52.222-21, Prohibition of Segregated Facilities .(APR 2015)

(x) 52.222-26, Equal Opportunity (E.O. 11246).(SEP 2016)

(xi) 52.222-35, Equal Opportunity for Veterans (38 U.S.C. 4212).(JUN 2020)

(xii) 52.222-36, Equal Opportunity for Workers with Disabilities (29 U.S.C. 793).(JUN 2020)

(xiii) 52.222-37, Employment Reports on Veterans (38 U.S.C. 4212).(JUN 2020)

(xiv) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (DEC (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40.2010)

(xv) 52.222-41, Service Contract Labor Standards (41 U.S.C. chapter 67).(AUG 2018) (xvi)

(A) 52.222-50, Combating Trafficking in Persons (22 U.S.C.