2__CLIN_0030_DWGS_0030-1_6__Extension.pdf
PDF 387 KB Posted
- Attached to
- TSC IIJA 8530 UNIVERSAL TEST FIXTURE
- Solicitation number
- 140R4026Q0120
About this file
This is an engineering drawing and bill of materials for CLIN 0030: 6-foot Column Extensions, part of the TSC IIJA 8530 Universal Test Fixture project under the Bureau of Reclamation.
The deliverables consist of structural steel components including two W14 X 132 6-foot upper columns, four 1-inch splice plates measuring 49 inches by 14¾ inches, and associated fasteners. The fastener requirements include 224 each of 7/8-inch by 3½-inch UNC A325 bolts, 224 heavy hex nuts, and 448 plain washers. All components must be fabricated per AWS D1.1 welding standards, with all burrs and sharp edges removed unless otherwise noted. The finished assembly requires two coats of Sherwin Williams steel specification 3002 red-oxide paint or equivalent. The drawing is scaled at 1/3 and includes detailed dimensional specifications, hole patterns, and weld locations as shown in Details A and B. The document was drawn by D. Starbuck on 5/5/2026, checked by A. Jenkins on 5/7/2026, and assigned drawing number 0030-1, Sheet 1 of 1, Revision B.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
NAME DESCRIPTION LENGTH PART NUMBER QUANTITY
Splice Plates 1" Plate per dwg. 49" X 14 3/4" 7 4
6' Upper Column W 14 X 132 6' 8 2
Splice Plate to Columns Bolts 7/8" X 3 1/2" UNC A325 Bolts 3 1/2" 224
Nuts 7/8" UNC A325 Heavy Hex Nuts 224
Washers 7/8" Plain Washers A325 448
BILL OF MATERIALS
DETAIL B
SCALE 1/3
DETAIL A
SCALE 1 / 3
A A
B B
C C
D D
DRAWN
CHECKED
QA
MFG
APPROVED
dstarbuck
AJENKINS
5/5/2026
5/7/2026
DWG NO
0030-1
TITLE
CLIN 0030: 6-foot Column Extensions
SCALE
REV
1OF1SHEET
B
A
(6
.0 in
(7
.0 in
6' COLUMN EXTENSION
(QTY 2) W14 X 132
(1
.0 in
(4
.0 in
(14.75) in
(1.000) in n1.00 in THRU
(2.500) in, TYP.
(3 .0 in
T Y
P
(3 .5 in
SPLICE PLATE (QTY 4)
1" PLATE
NOTES
1. REMOVE ALL BURRS AND SHARP EDGES UNLESS OTHERWISE NOTED.
2. WELD PER AWS D1.1.
3. WELD AS NEEDED UNLESS OTHERWISE SPECIFIED.
4. PAINT 2 COATS - SHERWIN WILLIAMS STEEL SPEC 3002, RED-OXIDE, OR EQUAL
5. PROVIDE HARDWARE PER BILL OF MATERIALS.
(2.500) in, TYP. (2.088) in
(3 .0 in (3
.0 in n1.000 in THRU
ALL FLANGES
(6 .0 in
(2.775) in(2.775) in
PROJECT
TSC IIJA 8530 UNIVERSAL TEST FIXTURE
File details come from the government source that posted it. Updated .