Q and A for 19PR5024Q0055.pdf

PDF 82 KB Posted

Attached to
Handheld X-ray Equipment Federal contract opportunity
Solicitation number
19PE5024Q0055
Issued by
Department of State US Embassy Lima

About this file

This document is a Q&A sheet for Request for Quotation (RFQ) 19PE5024Q0055 for handheld X-ray equipment. The RFQ is being issued by the Department of State's U.S. Embassy in Lima, Peru for the International Narcotics and Law Enforcement Section (INL) operation.

The key details from the Q&A sheet are:

  1. The required weight of the handheld X-ray equipment is not to exceed 12 lbs, and the slimline bar weight is not to exceed 1.30 lbs. Offerors cannot propose an X-ray flat panel detector exceeding 9.0 lbs or a slimline bar/panel with a span exceeding 0-405mm clearance.
  2. The required slimline bar/panel length is 405mm detection with up to 25mm steel penetration.
  3. For the training requirement, it is possible to split the 27 officials into 3 groups of 9 and provide 4 hours of training per group.

View the file

Other files for this federal contract opportunity

Other files attached to Handheld X-ray Equipment, newest first.
File Type Posted
RFQ 19PE5024Q0055 Xray solicitation.pdf PDF

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Q&A sheet for RFQ 19PE5024Q0055

1- Question: Requirement: weight 11 lbs, Could we offer an equipment Not to exceed 12 lbs?

Answer: Yes.

2- Question: Requirement: Slimline Bar weight not to exceed 1.30 lbs. Could we offer: Slimline Bar or X-Ray flat panel detector not to exceed 9.0 lbs?

Answer: No.

3- Question: Requirement: Slimline bar span 0-405mm clearance. Could we offer: Slimline bar or X-Ray flat panel detector span 0-405mm clearance?

Answer: No.

4- Question: Requirement: Slimeline bar length 405mm detection bar/ up to 25mm Steel penetration. Could we offer: Slimeline bar or X-Ray flat panel detector length 405mm detection bar or panel/ up to 25mm Steel penetration?.

Answer: No.

5- Question: Requirement: Training. Is it possible to distribute the officials into 3 groups (9 officials per group) and develop the training in periods of 4 hours per group?

Answer: Yes.

File details come from the government source that posted it. Updated .