RFQ-19KU2027Q0005- Diesel Generator Rental with ATS..pdf

PDF 782 KB Posted

Attached to
Rental, installation, and maintenance of Two (2) 500 kVA Standby Diesel Generators with Automatic Transfer Switches (ATS)
Solicitation number
19KU2027Q0005
Issued by

About this file

This is a Request for Quotations (RFQ) for the rental, installation, maintenance, and emergency support of two (2) 500 kVA standby diesel generators with Automatic Transfer Switches (ATS) at the U.S. Embassy in Kuwait. The base contract period is one month, commencing December 20, 2026, with four one-month option periods. The government intends to award to the responsible, licensed contractor submitting the lowest-priced technically acceptable quotation. Quotations must be submitted electronically by December 8, 2026, at 10:00 AM Kuwait local time, with questions accepted until November 25, 2026, at 10:00 AM Kuwait local time. A mandatory site visit is scheduled for November 24, 2026, at 11:00 AM Kuwait local time.

The scope of work requires the contractor to furnish, deliver, install, test, commission, operate, and maintain two Caterpillar Model C15 (or equivalent) generators rated at minimum 500 kVA / 400 kW at 0.8 power factor with 50 Hz frequency, including weatherproof sound-attenuated enclosures, digital auto-start controllers, and comprehensive protection systems. The generators must include standby fuel tanks with capacity for 72 hours of continuous operation at full load, and the contractor must supply an initial 10,000 liters of diesel fuel as a one-time charge plus up to 5,000 additional liters during the rental period at a separately invoiced unit price per liter. The ATS installations must be rated at least 800 A with mechanical and electrical interlocks preventing simultaneous grid and generator connection. All pricing must be provided in Kuwaiti Dinars (KWD) with four separate line items: commissioning and decommissioning charges (CLIN 0001), mobilization and demobilization charges (CLIN 0002), diesel charges for 10,000 liters (CLIN 0003), and monthly rental charges for the two generators including ATS installation (CLIN 0004), with identical pricing structures for four option periods (CLINs 0005–0008). The firm-fixed price must include all labor, materials, equipment, overhead, profit, and insurance, including Defense Base Act insurance for covered employees. Quotations must remain valid for 30 calendar days, and payment will be made in local currency on a monthly basis within 30 days of invoice receipt. Offerors must demonstrate relevant past performance with at least two contracts completed within the preceding five years involving diesel generator rental, installation, or maintenance at 400 kVA or higher capacity, provide qualified technical personnel documentation, confirm equipment availability, establish diesel fuel supply capability either directly or through subcontractors, and submit a comprehensive implementation plan addressing mobilization, installation, maintenance, emergency response within two hours with replacement unit capability within 24 hours if unrepaired, and decommissioning procedures. The evaluation criteria prioritize technical acceptability and past performance, with award based on lowest evaluated price among compliant proposals.

View the file

Other files

File Type Posted
RFQ-19KU2027Q0005- Diesel Generator Rental with ATS.docx DOCX document

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

United States Embassy GSO/Procurement

Kuwait City November 18, 2026

Dear Prospective Quoters:

Subject: Request for Quotations number RFQ 19KU2027Q0005 - Rental, installation, and maintenance of Two (2) 500 kVA Standby Diesel Generators with Automatic Transfer Switches

(ATS) – Caterpillar Model C15 or Equal

Enclosed is a Request for Quotations (RFQ) 19KU2027Q0005- Rental, installation, and maintenance of Two (2) a 500 kVA Standby Diesel Generator each equipped with Automatic

Transfer Switch (ATS), Caterpillar Model C15 or Cummins or equal, meeting or exceeding the minimum salient characteristics specified in the Pricing Table and Section 4.1 of the Scope of Work

(SOW), incorporated into the continuation of SF 1449. The requirement will be for one month with four one-month options to extend, subject to funds availability and Government’s best interest. If you would like to submit quotation, follow the instructions in Section 3 of the solicitation, complete the required portions of the attached document, and submit it to the address shown on Standard Form 1449 that follows this letter.

A site visit has been scheduled for Nov 24, 2026, at 11:00 AM Kuwait local time. For more information, please refer to page 46. Interested contractors are strongly encouraged to attend the scheduled site visit to inspect the premises prior to finalizing their proposals. It is the contractor’s sole responsibility to thoroughly assess the site during this visit. Any inaccuracies, omissions, or cost discrepancies in the submitted proposal resulting from failure to inspect the site shall be the contractor’s full responsibility.

1. Basis for Award

The Government intends to award a fixed price one-month purchase order with four one-month options to the responsible, licensed contractor submitting an acceptable quotation at the lowest price.

The Government intends to evaluate an award without discussion but reserves the right to conduct discussions in accordance with FAR 12.203 and 12.204 if determined to be in the Government’s best interest.

2. SAM Registration

Note: Prospective offerors are strongly encouraged, though not required, to register in the System for Award Management (SAM) at https://www.sam.gov.

• Offerors with an active SAM registration need only provide their Unique Entity Identifier

(UEI) number and are not required to complete the information 52.204-90 since relevant information is found in their SAM registration.

• Offerors without an active SAM registration must complete FAR 52.204-90, Offeror

Identification, in Section 5, Representations and Certifications. This information must be updated annually if option years are included in the solicitation or award.

Offerors are strongly encouraged to maintain an active SAM account https://www.sam.gov/

For a quotation to be considered, you must also complete and submit the following:

1. SF-1449 (12, 17a, 24, 30a, 30b and 30c)

2. Section 1, Pricing (Completed pricing schedule, including unit prices and total price;

3. Section 5, Representations and Certifications

4. Additional information as required in Section 3 and/or in the solicitation

5. Proof of SAM Registration / Unique Entity ID, or if not, SAM registered, complete FAR 52.204-90, Offeror Identification, Failure to submit the required information may render the quotation non-compliant and ineligible for further consideration.

Direct any questions regarding this RFQ to Kuwait_Solicitation@state.gov no later than Nov 25, 2026.

at 10:00 am Kuwait local time No questions will be accepted beyond this date. Please enter the title of your email as “Questions for RFQ: 19KU2027Q0005- Diesel Generator Rental with ATS.”

Submit your quote electronically by email to Kuwait_Solicitation@state.gov. Quotations are due by

Dec 8, 2026, at 10:00 am Kuwait local time. No quotes will be accepted after this time. Please enter the title of your email as “Quote for RFQ: 19KU2027Q0005- Diesel Generator Rental with ATS.”

Sincerely, Jennifer S Bowmar Contracting Officer mailto:Kuwait_Solicitation@state.gov

TABLE OF CONTENTS

SECTION 1 - THE SCHEDULE

• SF 1449 cover sheet

• Continuation To SF-1449, RFQ Number 19KU2027Q0005 - Diesel Generator Rental with ATS

Prices, Block 23

• Continuation To SF-1449, RFQ Number 19KU2027Q0005- Diesel Generator Rental with ATS, Schedule of Supplies/Services, Block 20 Description/Specifications/Work Statement

• Attachment 1: Crane

SECTION 2 - CONTRACT CLAUSES

• Contract Clauses

• Addendum to Contract Clauses - FAR and DOSAR Clauses not Prescribed in Part 12

SECTION 3 - SOLICITATION PROVISIONS

• Solicitation Provisions

• Addendum to Solicitation Provisions - FAR and DOSAR Provisions not Prescribed in Part 12

SECTION 4 - EVALUATION FACTORS

• Evaluation Factors

• Addendum to Evaluation Factors - FAR and DOSAR Provisions not Prescribed in Part 12

SECTION 5 - REPRESENTATIONS AND CERTIFICATIONS

• Offeror Representations and Certifications

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL PRODUCTS AND COMMERCIAL

SERVICES

NOTE: OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, & 30 1. REQUISITION NUMBER

PR16381128

PAGE 1 OF

2. CONTRACT NO.

3. AWARD/EFFECTIVE

DATE

4. ORDER NUMBER

19KU

2027Q0005

5. SOLICITATION NUMBER

19KU2027Q0005

6. SOLICITATION ISSUE DATE

Nov 18, 2026

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

Mohamad ELChami

b. TELEPHONE NUMBER (No collect calls)

+965-2259-1216

8. OFFER DUE DATE/ LOCAL

TIME Kuwait

Dec 8, 2026 @ 10:00 am

9.ISSUED BY CODE: 19KU20

10. THIS ACQUISITION IS UNRESTRICTED OR SET ASIDE: ____ % FOR:

American Embassy Kuwait

General Services Office

Procurement Office.

SMALL BUSINESS WOMEN-OWNED SMALL BUSINESS

HUBZONE SMALL

BUSINESS

(WOSB) ELLIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM NAICS:

SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

EDWOSB

8 (A) SIZE STANDARD:

11. DELIVERY FOR FOB DESTINAT-

SECTION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

12. DISCOUNT TERMS

13a. THIS CONTRACT IS A

RATED ORDER UNDER

DEFENSE PRIORITIES AND

ALLOCATIONS SYSTEM -

DPAS (15 CFR 700)

13b. RATING

14. METHOD OF SOLICITATION

RFQ Request for Quote IFB Invitation for Bid

RFP Request for Proposal

15. DELIVER TO CODE 19KU20 16. ADMINISTERED BY CODE 19KU20

Kuwait_Solicitation@state.gov

AMERICAN EMBASSY, KUWAIT

GENERAL SERVICES OFFICE

MASJID AL AQSA STREET, BAYAN KUWAIT

17a. CONTRACTOR/

OFFERER

TELEPHONE NO.

CODE

FACILITY

CODE

18a. PAYMENT WILL BE MADE BY

Budget and Fiscal Office

American Embassy Kuwait

Email: KuwaitDBO@state.gov

CODE 19KU20

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN

OFFER

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK

BELOW IS CHECKED SEE ADDENDUM

19.ITEM NO. 20.SCHEDULE OF SUPPLIES/SERVICES 21.QUANTITY 22.UNIT 23.UNIT PRICE 24.AMOUNT

• CLIN 0001

• CLIN 0002

• CLIN 0003

• CLIN 0004

-Commissioning & decommissioning charges

-Mobilization & demobilization charges

-Diesel charges for 10,000 liters

-Rental, installation, and maintenance of two (2) a

500 kVA Standby Diesel Generator with Automatic

Transfer Switch for one month

(Base period of performance)

Lot

Month

25. ACCOUNTING AND APPROPRIATION DATA 26. TOTAL AWARD AMOUNT (For Govt. Use Only)

27a.SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1, 52.212-4. ARE ARE NOT ATTACHED

27b.CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. ARE ARE NOT ATTACHED mailto:KuwaitDBO@state.gov

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN _1__

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON

ANY ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS

SPECIFIED HEREIN.

29. AWARD OF CONTRACT: REF. _________________ OFFER DATED

____________. YOUR OFFER ON SOLICITATION (BLOCK 5), INCLUDING ANY

ADDITIONS OR CHANGES WHICH ARE SET FORTH HEREIN, IS ACCEPTED AS

TO ITEMS:

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)

30b. NAME AND TITLE OF SIGNER (Type or print)

30c. DATE SIGNED

31b. NAME OF CONTRACTING OFFICER (Type or print)

31c. DATE SIGNED

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 11/2021)

Prescribed by GSA - FAR (48 CFR) 53.212

STANDARD FORM 1449 (REV. Jan 2011) BACK

19.ITEM NO. 20.SCHEDULE OF SUPPLIES/SERVICES 21.QUANTITY 22.UNIT 23.UNIT PRICE 24.AMOUNT

CLIN 0005

-Option 1. Rental, Installation, and Maintenance of two (2) a

500 kVA Standby Diesel Generator with Automatic Transfer

Switch for one month

1 1 month

CLIN 0006

-Option 2. Rental, Installation, and Maintenance of two (2) a

500 kVA Standby Diesel Generator with Automatic Transfer

Switch for one month

1 1 month

CLIN 0007

-Option 3. Rental, Installation, and Maintenance of two (2) a

500 kVA Standby Diesel Generator with Automatic Transfer

Switch for one month 1 1 month

CLIN 0008

-Option 4. Rental, Installation, and Maintenance of two (2) a

500 kVA Standby Diesel Generator with Automatic Transfer

Switch for one month

(Details as attached)

1 1 month

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: _______________________________

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f. TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

33. SHIP NUMBER 34.VOUCHER

NUMBER

35. AMOUNT VERIFIED

CORRECT FOR

36. PAYMENT 37.CHECK NUMBER

PARTIAL FINAL COMPLETE PARTIAL FINAL

STOCK RECORD (S/R) 40. PAID BY

38. S/R ACCOUNT NO.

39. S/R VOUCHER

NO.

41.a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT 42a. RECEIVED BY (Print)

41b. SIGNATURE AND TITLE OF CERTIFYING

OFFICER

41C. DATE

42b. RECEIVED AT (Location)

42c. DATE REC’D (YY/MM/DD) 42d. TOTAL CONTAINERS

SECTION 1 - THE SCHEDULE

CONTINUATION TO SF-1449

RFQ NUMBER 19KU2027Q0005

Rental, Installation, and Maintenance of Two (2) a 500 kVA Standby Diesel Generator with

Automatic Transfer Switch

PRICES, BLOCK 23

1. PERFORMANCE WORK STATEMENT

The purpose of this firm fixed price purchase order is for the rental, installation, and maintenance of two (2) a 500 kVA standby diesel generator each equipped with Automatic Transfer Switch (ATS) at U.S. Embassy Kuwait. The Contractor shall furnish, deliver, install, connect, test, commission, operate, maintain, and remove at the end of the contract the rented diesel generator sets.

The set shall include a standby fuel tank that holds enough fuel for at least 72 hours (3 days) of continuous operation at maximum load, an ATS, and all power and control cabling needed to connect the generator to the residence's main isolator.

A. Contract Duration and Delivery Schedule:

1. Duration: The contract will be for one month with four one-month options.

2. Rental Start Date: The tentative start date for the base period shall commence

December 20, 2026.

3. Delivery Requirement: The contractor must complete delivery of the required generators along with other related equipment to make sure they are operational from the start date of this rental.

B. The Government reserves the right to exercise any option period, if found to be in the best interest of the Government, subject to availability of funds.

C. In consideration of the Contractor's satisfactory performance of all services required under this contract, the Government shall pay the Contractor the fixed monthly rental rate per generator, as specified in the contract pricing schedule, together with applicable one-time charges.

Additional diesel fuel supplied during the rental period shall be invoiced separately and paid based solely on the actual quantities ordered, delivered, and accepted by the Government, at the established contract unit price per liter, subject to the authorized contract quantities and funding limitations.

D. The Government will make payment in local currency. Invoices to be submitted at end of every month to process for payment.

2. Pricing

2.1 VALUE ADDED TAX. Value Added Tax (VAT) is not applicable to this contract and shall not be included in the CLIN rates or Invoices because the U.S. Embassy has a tax exemption certificate from the host government

2.2 The firm-fixed price shall include all direct and indirect costs necessary to perform the generator rental service, including labor, supervision, materials, equipment, overhead, profit, and all required insurance, including insurance requirement for employees assigned to this purchase order who are

U.S. citizens, local National and direct hires and are subject to the Defense Base Act (DBA), the

Contractor shall obtain and maintain Defense Base Act insurance in accordance with FAR 52.228-3, Workers' Compensation Insurance (Defense Base Act). To comply with DOSAR 652.228-71(b), the

Contractor shall procure Defense Base Act (DBA) insurance directly from a Department of Labor

(DOL) approved insurance provider. Information regarding approved DBA insurance carriers is available through the U.S. Department of Labor at: Web site at Longshore Authorized Carriers and

Self-insured Employers | U.S. Department of Labor. All costs associated with DBA insurance shall be included in the firm-fixed prices for the base period and each option period.

2.3 The Contractor shall provide firm-fixed prices in Kuwaiti Dinars (KWD) for all Contract Line- Item Numbers (CLINs).

No additional compensation will be provided for increases in labor, material, transportation, shipping, insurance, registration, or any other associated costs, nor will the purchase order price be adjusted due to currency exchange rate fluctuations or the Contractor's failure to accurately estimate the costs of performance.

2.4 One-Time Charges

Item No. Description QTY Total Amount/KWD

CLIN 0001 Commissioning & decommissioning charges 1 Job

CLIN 0002 Mobilization & demobilization charges 1 Job

CLIN 0003 Diesel charges for 10,000 liters 1 Job https://www.dol.gov/agencies/owcp/dlhwc/lscarrier https://www.dol.gov/agencies/owcp/dlhwc/lscarrier

2.5 Base Period (One Month) – Rental Monthly Charges – CLIN 0004

Item No.

Description QTY Monthly Rental

(KWD)

CLIN

The Government requires a Caterpillar Model C15 generator set, or Cummins or equal, meeting or exceeding the following minimum salient characteristics (Caterpillar model C15, 500kva/44kE, 415*230 v, 3 phase 50 Hz, 500rpm, in sound attenuated enclosure)

The monthly lease charges shall include all items listed in this CLIN

Required salient characteristics:

Parameter Requirement

Rating Minimum 500 kVA / 400 kW at 0.8 power factor, standby rating

Voltage /

Phase

[415/230 V, 3-phase, 4-wire]

Frequency [50 Hz]

Engine Diesel, water-cooled, with electronic or mechanical governor (±0.5% frequency regulation or better)

Alternator Brushless, self-excited, with automatic voltage regulator (AVR), ±1% voltage regulation or better

Enclosure Weatherproof, sound-attenuated canopy, maximum [75 dBA at 7 meters]

Controller Digital auto-start controller with display of voltage, current, frequency, kW, kVA, power factor, run hours, fuel level, oil pressure, and coolant temperature

Protection Shutdown and alarm for low oil pressure, high coolant temperature, overspeed, over/under voltage, over/under frequency, overcurrent, short circuit, low fuel, and failure to start

Output breaker

Generator-mounted main circuit breaker sized to the generator rating

Starting 12/24 V DC electric start, batteries with automatic battery charger

Condition Equipment no more than [5] years old or under

[10,000] run hours, in good working order

Automatic Transfer Switch (ATS) Installation

Rating: 3-pole or 4-pole (to match the site's neutral and earthing system), rated at least [800] A or the generator's full-load current plus 25%, whichever is greater.

Fuel Tank 5,000L 2

7 x 1C x 240 Sqmm Cable x 30 m 1 set – 210m

7 x 1C x 240 Sqmm Cable x 10 m 2 sets – 140m

Total Monthly Lease

The Contractor shall invoice diesel fuel supplied during the rental period separately from the monthly generator rental charges. The Government shall pay only for the actual quantities of diesel fuel ordered, delivered, and accepted, based on the contractually agreed unit price per liter and within the authorized contract limits.

Item No Description Estimated

Liters Amount/KWD

1 Additional diesel fuel supply and refueling during the rental period

5000 -----------------

2.6 1st option period one (1) additional month rental charges - CLIN 5

Item No. Description QTY Monthly Rental

(KWD)

CLIN 0005

The Government requires a Caterpillar Model C15 generator set, or Cummins or equal, meeting or exceeding the following minimum salient characteristics (Caterpillar model C15, 500kva/44kE, 415*230 v, 3 phase 50 Hz, 500rpm, in sound attenuated enclosure)

The monthly lease charges shall include all items listed in this

CLIN

Required salient characteristics:

Parameter Requirement

Rating Minimum 500 kVA / 400 kW at 0.8 power factor, standby rating

Voltage /

Phase

[415/230 V, 3-phase, 4-wire]

Frequency [50 Hz]

Engine Diesel, water-cooled, with electronic or mechanical governor (±0.5% frequency regulation or better)

Alternator Brushless, self-excited, with automatic voltage regulator (AVR), ±1% voltage regulation or better

Enclosure Weatherproof, sound-attenuated canopy, maximum

[75 dBA at 7 meters]

Controller Digital auto-start controller with display of voltage, current, frequency, kW, kVA, power factor, run hours, fuel level, oil pressure, and coolant temperature

Protection Shutdown and alarm for low oil pressure, high coolant temperature, overspeed, over/under voltage, over/under frequency, overcurrent, short circuit, low fuel, and failure to start

Output breaker

Generator-mounted main circuit breaker sized to the generator rating

Starting 12/24 V DC electric start, batteries with automatic battery charger

Rating: 3-pole or 4-pole (to match the site's neutral and earthing system), rated at least [800] A or the generator's full-load current plus 25%, whichever is greater.

Fuel Tank 5,000L 2

The Contractor shall invoice diesel fuel supplied during the rental period separately from the monthly ordered, delivered, and accepted, based on the contractually agreed unit price per liter and within the authorized contract limits.

Item No Description Estimated

Liters Amount/KWD

Additional diesel fuel supply and refueling during

2.7 2nd option period one (1) additional month rental charges – CLIN 6

Item No. Description QTY Monthly Rental

(KWD)

CLIN

The Government requires a Caterpillar Model C15 generator set, or Cummins or equal, meeting or exceeding the following minimum salient characteristics (Caterpillar model C15, 500kva/44kE, 415*230 v, 3 phase 50 Hz, 500rpm, in sound attenuated enclosure)

The monthly lease charges shall include all items listed in this

CLIN

Required salient characteristics:

Parameter Requirement

Rating Minimum 500 kVA / 400 kW at 0.8 power factor, standby rating

Voltage /

Phase

[415/230 V, 3-phase, 4-wire]

Frequency [50 Hz]

Engine Diesel, water-cooled, with electronic or mechanical governor (±0.5% frequency regulation or better)

Alternator Brushless, self-excited, with automatic voltage regulator (AVR), ±1% voltage regulation or better

Enclosure Weatherproof, sound-attenuated canopy, maximum

[75 dBA at 7 meters]

Controller Digital auto-start controller with display of voltage, current, frequency, kW, kVA, power factor, run hours, fuel level, oil pressure, and coolant temperature

Protection Shutdown and alarm for low oil pressure, high coolant temperature, overspeed, over/under voltage, over/under frequency, overcurrent, short circuit, low fuel, and failure to start

Output breaker

Generator-mounted main circuit breaker sized to the generator rating

Starting 12/24 V DC electric start, batteries with automatic battery charger system), rated at least [800] A or the generator's full-load current plus 25%, whichever is greater.

Fuel Tank 5,000L 2

The Contractor shall invoice diesel fuel supplied during the rental period separately from the monthly ordered, delivered, and accepted, based on the contractually agreed unit price per liter and within the authorized contract limits.

Item No Description Estimated Liters

Amount/KWD

1 Additional diesel fuel supply and refueling during the rental period

2.8 3rd option period one (1) additional month rental charges – CLIN 7

Item No. Description QTY Monthly Rental

(KWD)

CLIN

The Government requires a Caterpillar Model C15 generator set, or Cummins or equal, meeting or exceeding the following minimum salient characteristics (Caterpillar model C15, 500kva/44kE, 415*230 v, 3 phase 50 Hz, 500rpm, in sound attenuated enclosure)

The monthly lease charges shall include all items listed in this CLIN

Required salient characteristics:

Parameter Requirement

Rating Minimum 500 kVA / 400 kW at 0.8 power factor, standby rating

Voltage /

Phase

[415/230 V, 3-phase, 4-wire]

Frequency [50 Hz]

Engine Diesel, water-cooled, with electronic or mechanical governor (±0.5% frequency regulation or better)

Alternator Brushless, self-excited, with automatic voltage regulator (AVR), ±1% voltage regulation or better

Enclosure Weatherproof, sound-attenuated canopy, maximum [75 dBA at 7 meters]

Controller Digital auto-start controller with display of voltage, current, frequency, kW, kVA, power factor, run hours, fuel level, oil pressure, and coolant temperature

Protection Shutdown and alarm for low oil pressure, high coolant temperature, overspeed, over/under voltage, over/under frequency, overcurrent, short circuit, low fuel, and failure to start

Output breaker

Generator-mounted main circuit breaker sized to the generator rating

Starting 12/24 V DC electric start, batteries with automatic battery charger

Condition Equipment no more than [5] years old or under [10,000] run hours, in good working order system), rated at least [800] A or the generator's full-load current plus 25%, whichever is greater.

Fuel Tank 5,000L 2

The Contractor shall invoice diesel fuel supplied during the rental period separately from the monthly ordered, delivered, and accepted, based on the contractually agreed unit price per liter and within the authorized contract limits.

Item No Description Estimated

Liters Amount/KWD

1 Additional diesel fuel supply and refueling during

2.9 4th option period one (1) additional month rental charges – CLIN 8

Item No. Description QTY Monthly Rental

(KWD)

CLIN

The Government requires a Caterpillar Model C15 generator set, or Cummins or equal, meeting or exceeding the following minimum salient characteristics (Caterpillar model C15, 500kva/44kE, 415*230 v, 3 phase 50 Hz, 500rpm, in sound attenuated enclosure)

The monthly lease charges shall include all items listed in this

CLIN

Required salient characteristics:

Parameter Requirement

Rating Minimum 500 kVA / 400 kW at 0.8 power factor, standby rating

Voltage /

Phase

[415/230 V, 3-phase, 4-wire]

Frequency [50 Hz]

Engine Diesel, water-cooled, with electronic or mechanical governor (±0.5% frequency regulation or better)

Alternator Brushless, self-excited, with automatic voltage regulator (AVR), ±1% voltage regulation or better

Enclosure Weatherproof, sound-attenuated canopy, maximum

[75 dBA at 7 meters]

Controller Digital auto-start controller with display of voltage, current, frequency, kW, kVA, power factor, run hours, fuel level, oil pressure, and coolant temperature

Protection Shutdown and alarm for low oil pressure, high coolant temperature, overspeed, over/under voltage, over/under frequency, overcurrent, short circuit, low fuel, and failure to start

Output breaker

Generator-mounted main circuit breaker sized to the generator rating

Starting 12/24 V DC electric start, batteries with automatic battery charger system), rated at least [800] A or the generator's full-load current plus 25%, whichever is greater.

Fuel Tank 5,000L 2

The Contractor shall invoice diesel fuel supplied during the rental period separately from the monthly ordered, delivered, and accepted, based on the contractually agreed unit price per liter and within the authorized contract limits.

Item No Description Estimated

Liters Amount/KWD

Additional diesel fuel supply and refueling during

2.10 Grand Total Summary – Base Month and All Option Months

CLIN

Lease Period

Total Lease Price

Base Period of one month

1st option period of one additional month

2nd option period of one additional month

3rd option period of one additional month

4th option period of one additional month

Grand Total

CONTINUATION TO SF-1449

RFQ NUMBER 19KU2027Q0005

SCHEDULE OF SUPPLIES/SERVICES, BLOCK 20

DESCRIPTION/SPECIFICATIONS/PERFORMANCE WORK STATEMENT

Scope of Work: Rental, Installation, and Maintenance of two (2) a 500 kVA Standby Diesel Generator with Automatic Transfer Switch

1. Background

The U.S. Government (USG) residence(s) at SDH draw power from the city grid. Grid outages disrupt operations and residents' safety and security. The USG needs a rented standby diesel generator. When the grid fails, the generator must start automatically and pick up the residence load through an

Automatic Transfer Switch (ATS). When grid power returns, the ATS must transfer the load back to the grid.

2. Objective

The Contractor shall furnish, deliver, install, connect, test, commission, operate, maintain, and remove at the end of the contract two (2) 500 kVA diesel generator sets equipped with ATS. The set shall include a standby fuel tank that holds enough fuel for at least 72 hours (3 days) of continuous operation at maximum load, an ATS, and all power and control cabling needed to connect the generator to the residence's main isolator.

3. Scope of Work

The Contractor shall provide all labor, supervision, equipment, materials, transportation, tools, permits, and consumables needed to:

1. Survey the site and confirm the electrical configuration before mobilizing.

2. Deliver and place the generator set, fuel tank, and ATS at the location the COR approves.

3. Supply and install all power cables, control wiring, terminations, and cable protection between the generator, the ATS, and the main isolator.

4. Connect the generator output cables to the main isolator through the ATS.

5. Test and commission the complete system.

6. Operate, maintain, and repair the equipment for the full rental period.

7. Disconnect, remove, demobilize all equipment at contract end and restore the site to its original condition.

4. Technical Requirements

4.1 Generator Set. The Government requires a Caterpillar Model C15 generator set, or Cummins or equal, meeting or exceeding the following minimum salient characteristics: quotations offering products other than the specified Caterpillar model shall clearly identify the manufacturer, brand, model number, and country of manufacture and include technical specifications, manufacturer data sheets, and supporting documentation demonstrating compliance with all stated salient characteristics.

The Government will consider equivalent generator models that meet or exceed the specified minimum technical and performance requirements. Failure to demonstrate compliance with the salient characteristics may result in the quotation being determined technically unacceptable. The generator offered shall be manufactured by an established generator manufacturer and comply with applicable internationally recognized technical, electrical, safety, and performance standards, including relevant

ISO and IEC standards. The offeror shall provide manufacturer documentation demonstrating compliance with the specified salient characteristics.

Evaluation: An equal product must satisfy the identified salient characteristics; it need not duplicate every feature of the Caterpillar C15 or Cummins

Parameter Requirement Rating Minimum 500 kVA / 400 kW at 0.8 power factor, standby rating Voltage / Phase [415/230 V, 3-phase, 4-wire] Frequency [50 Hz] Engine Diesel, water-cooled, with electronic or mechanical governor (±0.5% frequency regulation or better) Alternator Brushless, self-excited, with automatic voltage regulator (AVR), ±1% voltage regulation or better Enclosure Weatherproof, sound-attenuated canopy, maximum [75 dBA at 7 meters] Controller Digital auto-start controller with display of voltage, current, frequency, kW, kVA, power factor, run hours, fuel level, oil pressure, and coolant temperature Protection Shutdown and alarm for low oil pressure, high coolant temperature, overspeed, over/under voltage, over/under frequency, overcurrent, short circuit, low fuel, and failure to start

Output breaker Generator-mounted main circuit breaker sized to the generator rating Starting 12/24 V DC electric start, batteries with automatic battery charger Condition Equipment no more than [5] years old or under [10,000] run hours, in good working order

4.2 Standby Diesel Fuel Tank and Storage

1. The Contractor shall provide a fuel tank (base tank, external bulk tank, or both) with usable capacity for a minimum of 72 hours of continuous operation at 100% rated load.

2. The Contractor shall size the tank from the manufacturer's published full-load fuel consumption rate and submit the calculation with its proposal. (For planning only: a 500 kVA set typically consumes roughly 100–115 liters per hour at full load, which works out to about

7,200–8,300 liters over 72 hours. The Contractor's manufacturer data governs.)

3. The tank shall include a fuel level gauge, low-fuel alarm tied to the generator controller, vent, lockable fill cap, and drain valve.

4. Fuel lines between the bulk tank and the generator shall be rated for diesel, protected from physical damage, and leak-free.

5. Fuel Supply and Refueling: The Contractor shall be responsible for the supply and delivery of an initial 10,000 liters of diesel fuel at the commencement of the rental period, as a one-time charge, including filling the generator fuel tanks.

During the rental period, the Contractor shall also be responsible for supplying and delivering up to an additional 5,000 liters of diesel fuel, including refueling services, as required to maintain uninterrupted generator operations.

The initial 10,000 liters shall be invoiced separately as a one-time charge. Any additional diesel fuel supplied during the rental period shall be invoiced separately based on the actual quantities delivered and accepted by the Government, at the contractually agreed unit price per liter, not to exceed 5,000 additional liters without prior written authorization from the Contracting

Officer.

The Contractor shall monitor fuel levels and coordinate timely refueling to maintain the generator fuel tanks at no less than 75% of their capacity throughout the rental period, subject to the contracted fuel quantities."

6. The contractor is responsible to top-up diesel as and when required.

4.3 Automatic Transfer Switch (ATS)

1. Rating: 3-pole or 4-pole (to match the site's neutral and earthing system), rated at least [800]

A or the generator's full-load current plus 25%, whichever is greater.

2. Operation sequence:

o The ATS monitors city grid voltage and frequency on all phases continuously.

o On grid failure or phase loss, the ATS sends a start signal to the generator after an adjustable delay (0–10 seconds).

o Once generator voltage and frequency stabilize, the ATS transfers the load to the generator. Total time from outage to transfer shall not exceed [15] seconds.

o When grid power returns and stays stable for an adjustable period (default 5 minutes), the ATS transfers the load back to the grid.

o The generator then runs unloaded through an adjustable cool-down period (default 5 minutes) and shuts down automatically.

3. Interlocking: Mechanical and electrical interlocks that prevent the grid and generator from ever connecting to the load at the same time (no backfeed to the city grid).

4. Controls: Auto/Manual/Off selector, manual override, source-available and source-connected indicators, and an exercise timer for scheduled test runs.

5. Enclosure: Minimum IP54 if installed indoors, IP65 if outdoors, lockable.

4.4 Cables and Connections

1. The Contractor shall supply and install copper power cables, sized for the generator's full-load current plus at least 25% margin, with allowance for voltage drop (maximum 3%) over the actual route length.

2. Cables shall be armored or installed in conduit/cable tray and protected from vehicles, foot traffic, weather, and UV exposure. Cable crossings at walkways or driveways shall use rated cable protectors or buried ducts.

3. The Contractor shall terminate cables with properly sized lugs, glands, and phase identification.

4. The Contractor shall connect the generator output cables to the residence's main isolator through the ATS. The Contractor shall coordinate the shutdown of the main supply with the COR and Facility Manager at least [48] hours in advance and keep the outage to a minimum.

5. The Contractor shall install control wiring between the ATS and the generator controller for the remote start/stop signal.

4.5 Earthing and Bonding

The Contractor shall earth the generator frame, neutral (per the site's earthing system), fuel tank, and

ATS enclosure. Earth resistance shall not exceed [5] ohms. The Contractor shall bond the system to the existing building earth where required.

4.6 Codes and Standards

All work shall comply with local electrical codes and with the applicable international standards

(e.g., IEC 60364, ISO 8528, IEC 60947-6-1 for ATS) or the U.S. equivalents (NFPA 70, NFPA 110, UL 1008 for ATS), whichever are more stringent. All work shall also comply with Department of

State and Bureau of Overseas Buildings Operations (OBO) facility requirements as directed by the

COR.

5. Site Preparation and Installation

1. The Contractor shall place the generator on a level, stable base (concrete pad or steel skid) that the COR approves.

2. Generator location shall provide adequate ventilation and exhaust discharge away from windows, doors, air intakes, and occupied areas.

3. The Contractor shall maintain clearance around the unit for maintenance access and refueling vehicles.

4. The Contractor shall provide fire extinguishers (minimum one 9 kg dry chemical or CO₂) at the generator and fuel tank.

6. Testing and Commissioning

The Contractor shall perform the following tests:

1. Insulation resistance test on all new cables.

2. Phase rotation checks to confirm the generator and grid rotation match.

3. Load bank test: 4 hours total, including at least 1 hour at 100% rated load, recording voltage, frequency, current, and temperatures every 15 minutes.

4. ATS functional test: Simulate grid failure by opening the utility supply, and verify auto-start, transfer time, retransfer, cool-down, and shutdown.

5. Protection and alarm test: Verify that all shutdowns and alarms work.

6. Earth resistance test.

The Contractor shall submit a signed commissioning report. The USG will issue acceptance only after the system passes all tests.

7. Operation and Maintenance During the Rental Period

1. Preventive maintenance: The Contractor shall service the equipment according to the manufacturer's schedule (oil, filters, coolant, belts, batteries) at no extra cost.

2. Weekly no-load run: Automatic exercise of [15–30] minutes per week, logged.

3. Monthly inspection: Visual inspection, fluid levels, battery condition, fuel level, leak check, and ATS check, with a written report to the COR.

4. Emergency response: The Contractor shall provide a 24/7 hotline and arrive on site within

[2] hours of a call. If the generator cannot be repaired within [8] hours, the Contractor shall supply a replacement unit of equal or greater capacity within [24] hours at no extra cost.

5. Run-hour and fuel logs: The Contractor shall keep these logs and submit them to the COR monthly.

8. Safety and Environmental Requirements

1. The Contractor shall follow lockout/tagout procedures for all electrical work.

2. Only qualified, licensed electricians shall perform connection work.

3. Personnel shall wear appropriate PPE.

4. The Contractor shall prevent fuel and oil spills. It shall keep a spill kit on site, clean up any spills immediately at its own cost, and dispose of waste oil, filters, and contaminated materials in line with local environmental regulations.

5. The Contractor shall report all accidents, injuries, and spills to the COR immediately.

9. Security and Access

1. Contractor personnel shall comply with Post's security and escort requirements and submit personnel information for clearance working days before site access.

2. Work at the residence shall take place only during hours the COR approves, with advance coordination with the residents.

10. ACCESS TO GOVERNMENT BUILDINGS AND STANDARDS OF CONDUCT

10.1 General. The Contractor shall designate a representative who shall supervise the Contractor's mechanics and be the Contractor's liaison with the U.S. Embassy/Consulate. The Contractor's employees shall be on-site only for contractual duties and not for any other business or purposes.

10.2 Personnel Security. The Government reserves the right to deny access to U.S owned and U.S.-operated facilities to any individual. The Contractor shall provide the names, biographic data and police clearance on all Contractor personnel who shall be used on this contract prior to their utilization.

The Government shall issue identity cards to approved Contractor personnel, each of whom shall display his/her card(s) on the uniform at all times while on Government property or while on duty at private residences serviced under this contract. These identity cards are the property of the Government. The Contractor shall return all identity cards when the contract is completed, when a Contractor’s employee leaves this contract, or at the request of the Government.

10.3 Standards of Conduct

10.3.1 General. The Contractor shall maintain satisfactory standards of employee competency, conduct, cleanliness, appearance and integrity and shall be responsible for taking such disciplinary action with respect to employees as may be necessary. Each Contractor employee shall adhere to standards of conduct that reflect credit on themselves, their employer, and the United States

Government. The Government reserves the right to direct the Contractor to remove an employee from the worksite for failure to comply with the standards of conduct. The Contractor shall immediately replace such an employee to maintain continuity of services at no additional cost to the Government.

10.3.2 Uniforms and Personal Equipment. The Contractor's employees shall wear clean, neat and complete uniforms when on duty. All employees shall wear uniforms approved by the Contracting Officer's Representative (COR). The Contractor shall provide, to each employee and supervisor, uniforms and personal equipment. The Contractor shall be responsible for the cost of purchasing, cleaning, pressing, and repair of the uniforms.

10.3.3 Neglect of duties shall not be condoned. This includes sleeping while on duty, unreasonable delays or failures to carry out assigned tasks, conducting personal affairs during duty hours and refusing to render assistance or cooperate in upholding the integrity of the worksite security.

10.3.4 The Contractor shall not condone disorderly conduct, use of abusive or offensive language, quarreling, and intimidation by words, actions, or fighting. Also included is participation in disruptive activities that interfere with normal and efficient Government operations.

10.3.5 Intoxicants and Narcotics. The Contractor shall not allow its employees while on duty to possess, sell, consume, or be under the influence of intoxicants, drugs or substances which produce similar effects.

10.3.6 Criminal Actions. Contractor employees may be subject to criminal actions as allowed by law in certain circumstances. These circumstances include but are not limited to the following actions:

falsification or unlawful concealment, removal, mutilation, or destruction of any official documents or records or concealment of material facts by willful omission from official documents or records;

unauthorized use of Government property, theft, vandalism, or immoral conduct; unethical or improper use of official authority or credentials; security violations; organizing or participating in gambling in any form; and misuse of weapons.

10.3.7 Key Control. The Contractor shall receive, secure, issue and account for any keys issued for access to buildings, offices, equipment, gates, or other areas, for the purposes of this contract. Keys shall not be duplicated without the COR's approval. Where the Government determines that the Contractor or its agents have duplicated a key without permission of the COR, the Contractor shall remove the individual(s) responsible from performing work under the contract. If the Contractor has lost any such keys, the Contractor shall immediately notify the COR. In either event, the Contractor shall reimburse the Government for the cost of rekeying that portion of the system so compromised.

11. Insurance Requirement

11.1 Personal Injury, Property Loss or Damage (Liability). The Contractor assumes absolute responsibility and liability for any and all personal injuries or death and property damage or losses suffered due to negligence of the Contractor's personnel in the performance of this contract

The Contractor's assumption of absolute liability is independent of any insurance policies.

Insurance. The Contractor, at its own expense, shall provide and maintain during the entire period of performance of this contract, whatever insurance is legally necessary. The Contractor shall carry the following minimum insurance:

(1) BODILY INJURY, ON OR OFF THE SITE, IN U.S. DOLLARS

Per Occurrence US$ 10,000

Cumulative US$ 10,000

(2) PROPERTY DAMAGE, ON OR OFF THE SITE, IN U.S.

DOLLARS

Per Occurrence US$ 30,000

Cumulative US$ 30,000

11.2 Worker's Compensation Insurance. The Contractor agrees to provide all employees with worker's compensation benefits as required by the laws of either the country in which the employees are working or the employee's native country, whichever offers greater benefits, following FAR 52.228- 3.

12.0 PERMITS

The Contractor shall maintain in full force and affect all permits, licenses, and appointments required for the prosecution of work under this contract at no additional cost to the Government. The Contractor shall obtain these permits, licenses, and appointments in compliance with host country laws.

13.0 LOCAL LAW REGISTRATION

If the local law or decree requires that one or both parties to the contract register the contract with the designated authorities to insure compliance with this law or decree, the entire burden of this registration shall rest upon the Contractor. Any local or other taxes which may be assessed against the contract shall be payable by the Contractor without Government reimbursement.

14. QUALITY ASSURANCE AND SURVEILLANCE PLAN (QASP)

14.1 This plan provides an effective method to promote satisfactory contractor performance. The

QASP provides a method for the Contracting Officer's Representative (COR) to monitor Contractor performance, advise the Contractor of unsatisfactory performance, and notify the Contracting

Officer of continued unsatisfactory performance. The Contractor, not the Government, is responsible for management and quality control to meet the terms of the contract. The role of the

Government is to monitor quality to ensure that contract standards are achieved.

Performance Objective Scope of Work

Para Performance Threshold

Services.

Performs all services set forth in the scope of work.

All.

All required services are performed and no more than one

(1) customer complaint is received per month.

14.2 Surveillance. The COR will receive and document all complaints from Government personnel regarding the services provided. If appropriate, the COR will send the complaints to the Contractor for corrective action.

14.3 Standard. The performance standard is that the Government receives no more than one (1) customer complaint per month. The COR shall notify the Contracting Officer of the complaints so that the Contracting Officer may take appropriate action to enforce the inspection clause (FAR 52.212-4, Contract Terms and Conditions-Commercial Items), if any of the services exceed the standard.

14.4. Procedures.

14.4.1 If any Government personnel observe unacceptable services, either incomplete work or required services not being performed they should immediately contact the COR.

14.4.2 The COR will complete appropriate documentation to record the complaint.

14.4.3 If the COR determines the complaint is invalid, the COR will advise the complainant. The COR will retain the annotated copy of the written complaint for his/her files.

14.4.4 If the COR determines the complaint is valid, the COR will inform the Contractor and give the Contractor additional time to correct the defect, if additional time is available. The COR shall determine how much time is reasonable.

14.4.5 The COR shall, as a minimum, orally notify the Contractor of any valid complaints.

14.4.6 If the Contractor disagrees with the complaint after investigation of the site and challenges the validity of the complaint, the Contractor will notify the COR. The COR will review the matter to determine the validity of the complaint.

14.4.7 The COR will consider complaints as resolved unless notified otherwise by the complainant.

14.4.8 Repeat customer complaints are not permitted for any services. If a repeat customer complaint is received for the same deficiency during the service period, the COR will contact the Contracting Officer for appropriate action under the Inspection clause

Attachment 1 – Crane

U.S. Embassy-Kuwait-POSHO Office

CRANE OPERATION REQUIREMENTS AND SAFETY GUIDELINES

All contractors and vendors intending to provide crane services within the U.S. Embassy compound or on Embassy property in Kuwait must comply with the following minimum documentation, operational, and safety requirements.

1. Required Documentation

Prior to the commencement of any crane operation, the contractor shall submit the following documents for review and recordkeeping:

• Valid crane inspection and load testing reports/certificates.

• Proof of qualification and competency of the crane operator.

• Proof of qualification of personnel assigned to rigging activities, as applicable.

• A lift plan and job-specific safety plan outlining the proposed crane operation.

2. Crane Access and Site Safety Requirements

The contractor shall ensure that the following requirements are strictly observed during crane operations:

• Crane Access: The crane must enter the Embassy compound through the designated back gate. Entry through the front gate is not permitted.

• Ground Escort: At least one designated escort shall be available on the ground throughout the crane operation. The escort shall guide the crane along the approved travel route and alert pedestrians and other personnel to remain clear of the crane's swing radius and load-handling area.

• Barricades and Warning Devices: The contractor shall provide all necessary barricades, warning tape, traffic cones, and appropriate signage to restrict unauthorized access to the crane's swing area, load-handling area, and general work zone.

• Pedestrian and Vehicle Control: The contractor shall ensure that pedestrians and vehicles are safely diverted away from the crane's operating and lifting areas.

3. POSHO Coordination and Prior Approval

In accordance with Department of State Office of Building Operations (OBO) and Safety, Health, and Environmental Management (SHEM) guidelines, all crane rentals and operations within the

Embassy compound or on Embassy property must be coordinated with the Post Occupational Safety and Health Officer (POSHO) Office before the crane is rented or mobilized.

The requesting office shall notify the POSHO Office of the proposed crane operation and provide the following information:

• Purpose and Scope of Work (SOW): A brief description of the work to be performed, including the reason for requiring a crane.

• Lift Plan: A detailed description of the proposed lifting operation, including the lifting sequence and equipment to be used.

• Date and Location: The proposed date, time, and exact location of the crane operation.

• Crane Capacity: The required crane capacity and specifications.

• Load Information: The estimated weight, dimensions, and nature of the load to be lifted or relocated.

3.1 Lift Plan and Safety Requirements

The contractor shall submit a comprehensive lift plan addressing, at a minimum, the following:

• Engineering controls and relevant calculations to demonstrate that the crane and associated lifting equipment are suitable for the proposed operation.

• A site-specific safety plan identifying potential hazards and corresponding mitigation measures.

• Traffic management and access control arrangements, including proposed barriers for vehicles and pedestrians.

• Fall protection and other applicable personal protective equipment (PPE) requirements.

• Wind speed, weather conditions, and other environmental factors that may affect safe crane operation, including operations on inclined or uneven terrain.

• Measures to protect the contractor's personnel, Embassy employees, visitors, pedestrians, and other individuals who may be affected by the operation.

• The proposed crane setup location, travel route, lifting radius, and load-handling area.

3.2 Mandatory Site Walkthrough

Before finalizing the contract or mobilizing the crane, the requesting office and contractor shall conduct a joint site walkthrough, in coordination with the POSHO Office as required.

The walkthrough shall identify and assess:

• The designated crane entrance and access route.

• Crane setup and operating locations.

• Driveways, turning areas, and available clearances.

• Existing structures, overhead obstructions, underground utilities, and other potential hazards.

• Pedestrian and vehicle traffic patterns.

• The proposed lifting area and load placement location.

Any identified hazards shall be addressed and appropriate control measures agreed upon before the operation is approved.

4. Contractor and Vendor Responsibilities

The requesting office and Procurement Office shall ensure that all crane-related safety and operational requirements are clearly communicated to the contractor/vendor and incorporated into the contractual arrangements, as applicable.

The contractor shall provide the following assurances and documentation:

a. Crane Inspection and Operating Compliance

The…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated .