RFP_No_191Z5018R0002_Attachment_1.pdf

RFP No.: 191Z5018R0002, Attachment 1

U.S. Consulate General Basrah

LED Lighting Package Bill of Material

ATTACHMENT 1

U.S. CONSULATE GENERAL BASRAH

LED OBSTRUCTION LIGHTING PACKAGE

BILL OF MATERIAL

1. Requirement: The vendor shall provide lighting to achieve the following design standards:

A. The response shall specify the lighting foot candles at ground level outward for a distance of

75 feet and a width of 40 feet. At ground level, the average foot candle reading across this area should be no less than 230. At 5 feet, the average foot candle reading should be no less than 300. The response shall provide for a maximum quantity of sixteen (16) LED exterior light fixtures mounted on the top of a maximum of four (4) direct burial poles extending nine

(9) feet above grade (12 feet total length). The package shall include a complete photometric design for all light fixtures, including lamps, poles, pole lighting brackets and mounting hardware. This is to be referred to as Quantity 1.

2. Each fixture will contain:

A. LED light engines with electronic ballasts and surge protection.

B. 220-240 volt, 50 hz power source.

C. Must meet Underwriters Laboratories (UL), Electrical Testing Labs (ETL), or Canadian

Standards Association (CSA) standards and be Restriction of Hazardous Substances (RoHS) compliant.

D. Must be suitable for operating temperatures between -40°F-122°F

E. Maximum 900-watt LED light source

F. Beam spread of 25 degrees

G. 5000K+ color temperature

H. Minimum 80 CRI

I. Compliance to ASTM B117/ISO 9227:2012 salt-spray certification.

J. Die-cast aluminum housing with an EPA no greater than 1.2.

K. LEDs arranged in a minimum of eight (8) independent modules, each using CREE LED chips.

L. Each LED module must be IP67 rated.

M. Adjustable arm mount (slip fitter)

N. LED life expectancy is to be L70 rated at minimum of 200,000 hours.

RFP No.: 191Z5018R0002, Attachment 1

U.S. Consulate General Basrah

LED Lighting Package Bill of Material

3. Pole Design:

A. All LED luminaires shall be compatible with the pole and mounting hardware provided and shall include all attachment hardware. The LED fixtures should be mounted on a maximum of 4 direct burial poles.

B. All poles shall be direct burial with 9 feet above grade (12 feet total length). They must be constructed using a minimum of 7-gauge steel, and be capable of supporting the fixtures including typical wind loads.

C. The pole shall have a below-grade wiring slot and an above-grade reinforced hand-hole with cover.

D. Pole steel must conform to ASTM-A 500 Grade B standards with minimum yield strength of

55,000 psi, with minimum 7-gauge wall thickness.

4. All light fixtures and poles shall use corrosion-resistant powder coating in matching dark bronze or black color.

5. All materials are to include a five-year manufacturer’s warranty.

6. Pricing Details:

a. Provide per unit and total pricing based upon multiples of the quantities described in paragraph 1A above as follows:

a. Quantity 1, cost =? (freight options included separately) b.Quantity 1 - 2, cost =? (freight options included separately)

c. Quantity 3 - 4, cost =? (freight options included separately) d.

7. Shipping/Freight:

Price shall include delivery options to two FOB Destinations:

1. Ikun, LLC – U.S. Consulate – Basrah 2801 Route 130 Unit 1 North Brunswick, NJ 08902, United States

2. U.S. Consulate General – Basrah, Iraq