2024-11-22 SOW DRAFT BPA INTERCEPTOR FLEET SSN.docx

ATTACHMENT 1

STATEMENT OF WORK (SOW)

INL BOGOTA

PURCHASE, PREVENTIVE MAINTENANCE, CORRECTIVE MAINTENNACE, AND OVERHAUL OF INTERCEPTOR AND LITTORAL BOATS BRAND NAME SAFEBOATS INTERNATIONAL.

October 15, 2024

Table of Contents

Section 1 – Required Supplies and Services

1.1. Background

The mission of the Bureau of International Narcotics and Law Enforcement (INL) is to minimize the impact of international crime and illegal drugs on the United States, its citizens, and partner nations by providing effective foreign assistance and by fostering global cooperation. A key component of this mission in Colombia is assisting the Colombian Navy with sustainment of the Coast Guard (CG) interceptor boat fleet and the Marines littoral fleet executing maritime counternarcotics operations. The U.S. government (USG) donated interceptor boats brand name Safe Boats International, classes APOSTLE, DEFENDER and MARINES LITTORAL. To build up the fleet, the government of Colombia (GOC) with own budget, also purchased interceptor boats of the same brand name and classes. In contribution to the fleet’s operational readiness rate, INL Bogota agreed to complement GOC ongoing investment with the purchase or new boats, performance of preventive and corrective maintenance for the existing fleet, and overhaul process when required by establishing a firm fixed unit cost Blanket Purchase Agreement (BPA) to included pricing for new boats, maintenance, overhauls, and major components.

1.2 Required Products and Services

All boats and services must meet or exceed the minimum specifications and must be suited to fulfill the intended use description.

Minimum Requirements: Boats and/or services that do not meet these requirements will not be considered for award.

Preferred Requirements: While boats that do not meet these requirements may be considered for an award, the Government will consider boats meeting these requirements to be more beneficial to the Government when conducting any price-technical tradeoffs.

CLIN 001: SAFE BOATS International 65 feet full cabin inboard a.k.a. Archangel.

Quantity: TBD in each order

Intended Use: All proposed boats must be suitable for the intended use. All boats in this CLIN will be used to execute counter narcotics maritime interdiction operations in Colombian territorial waters for the Colombian Navy Coast Guard. These boats will be primarily used at sea during day and night time in high-speed persecutions under inclement weather and rough sea state conditions where construction material (aluminum 5086), hull and deck design compliance with ABS high speed structural requirements, design features such as angled stringer system, steeped transom, planning shoe, strake design, and performance fin, Safety of life at sea (SOLAS) features, water tightness integrity, stability, agility, performance, dependability, durability, payload capability, engine power, fuel capacity, top speed, range, communications, navigation and surveillance equipment are paramount to the function of the solicited items.

The requirements are outlined below:

A. Minimum Requirements

Designed to ABS high speed craft structural requirements 4 watertight compartments Hydro pressure and leak test fuel tanks Reinforced keel Fully welded performance strakes Self-bailing weather decks Jet guard and swim deck at transom Bow eye for full load vessel towing Anchor system 18 inches aluminum welded cleats 10 inches aluminum welded cleat for anchor tie off on forepeak Sacrificial hull anodes Integral sea chest

Port/starboard and aft hinged doors for exterior access

X-band navigation radar, GPS, magnetic compass, depth sounder, search lights.

Communications package to include:

Loudhailer, VHF radios, law enforcement lighting strobes

CLIN 002: SAFEBOATS International 41 feet interceptor a.k.a. “APOSTLE” with Boatmaster Aluminum Trailer, 24,000lb GVRW, for SAFE 41 Stepped Hull

Quantity: TBD in each order

Intended Use: All proposed boats must be suitable for the intended use. All boats in this CLIN will be used to execute counter narcotics maritime interdiction operations in Colombian territorial waters for the Colombian Navy Coast Guard. These boats will be primarily used at sea during day and night time in high-speed persecutions under inclement weather and rough sea state conditions where construction material (aluminum 5086), hull and deck design compliance with ABS high speed structural requirements, design features such as angled stringer system, steeped transom, planning shoe, strake design, and performance fin, Safety of life at sea (SOLAS) features, water tightness integrity, stability, agility, performance, dependability, durability, payload capability, engine power, fuel capacity, top speed, range, communications, navigation and surveillance equipment are paramount to the function of the solicited items.

The requirements are outlined below:

A. Minimum Requirements

Mercury engine rigging with hydraulic power assist steering

· 5/16 inch– 5086 bottom plate with SAFE Boats exclusive stringer system with angled transverse framing

· Reinforced keel beaching plate

· Stepped transom with speed shoe in bottom plate

· Performance wings below collars for increased lift and stabilization while maneuvering

· Fully welded performance lifting strakes

· Self bailing decks with high volume scupper drains

· Forward anchor locker

· Dual aft locker system with topside access stowage and front side rigging access

· Transom inspection hatch

· Sacrificial hull anode(s)

· Trim Tabs, Mercury K-Planes - 941 Series SAFE Boats

· Port and starboard weapons mount foundations - Level 1 on SAFE 41 CC-OS.

· Reinforced push knees

· Tow post and tow line guide

· Black nonskid paint

· Fixed windscreen

· Swing down radar arch

· Safety hand/grab rail system with black rubberized rail wrap

· Two-tier removable outboard motor guard with fairleads

· Gray rubberized rail wrap

· Seat storage box/cooler in front of console

· Gray rubberized dash skid

· Aft storage bolster with large aft facing gasketed aluminum doors

· Allsalt 4800 suspension seat, fore/aft/height adjust, lap belt, black upholstery

· One (1) binnacle box to mount on helm seat

· Upgrade SAFE XDR collars with additional black rub strake & doubled collar material on aft section.

· Black rubberized dash skid

· Upholstered headliner

· Marine grade carpet and insulation

· Custom fabricated weld-on pick eyes with stainless steel inserts

· Weld-on bow eye with triple stainless-steel inserts

· Weld-on transom tie downs

· Forward tow post with single stainless steel cross pin

· Blue Sea 360 marine grade breaker system

· Backlit switch panel with marine grade switches

· Four (4) 12VDC power receptacles - two (2) on dash and two (2) on mid console

· Self-parking intermittent windshield wiper system with washer

· Additional house battery wired in parallel with existing 12VDC house battery creating a dual bank, 12VDC, single house battery bank

· 110VAC Shore Power Kit - 4 Battery System with Pronautic

· Dimmable LED walkway lights

· Six (6) red/white dome lights – two (2) on overhead and one (1) in cuddy

· Seven (7) LED flood lights - two (2) port, two (2) starboard, one (1) forward and two (2) aft

· One (1) 12VDC rechargeable flashlight

· Four (04) Whelen L22 LED law enforcement strobes, 12VDC, 2 blue, 2 red with two (2) weld on pods installed forward on T-top, (2) weld on pods installed on outboard sides on mid T-top

· Magnetic compass w/ dimmable back-lighting

· C-Map NT chart, chart cartography (unlock codes) for all of Colombia MM3-VSA-500 C-map chart pack and MM3-VNA-027 C-map chart

· Furuno DRS6AX 6kW UHD digital radar for TZ touch & TZ Touch2 with 3.5 inches open array & 12/24V DC Converter

· Furuno Nav Net TZ T12F TZ touch 3 chart plotter and fish finder 12 inches hybrid control IPS display

· Furuno GP330B GPS/WAAS sensor - NMEA 2000 compatible antenna for stand alone GPS on NAVNET 3D

· Furuno PG700 NMEA2000 Rate Compensated Heading Sensor

· Furuno SC33 Compact Dome Satellite Compass

· FLIR M364C dual payload stabilized 640 thermal 24 deg FoV & HD color low-light camera with JCU1 PoE injector kit, weld on camera bracket and space & power reservations for FLIR M camera

· Icom M605 VHF marine transceiver with Shakespeare PHASE III 6225 8 feet VHF Antenna with SS ratchet mount

· Icom IC A-220 VHF air band receiver with antenna

· Whelen loudhailer system. WPA112, WPA3, SA315

· Furuno HUB102 5-port ethernet hub, for use with NavNet series MFD's

· SS60 0 Degree SS 600W thru-hull transducer

· Two (02) ACR RCL-100 LED Remote Control Searchlight, 220,000 CD, 12/24VDC with space and power reservations & (2) Weld on pods to accommodate the (2) searchlights

· One (1) bolt on overhead radio bracket for two Radios

· Life ring mount

· Telescoping swim ladder mounted on outboard bracket

· Winslow 6 person ultra light offshore life raft with pelican case & cradle

· ACR 2851 GlobalFix V5 category I EPIRB with integral GPS/AIS and automatic release bracket

· EPA-compliant fill and vent system with integrated check-valves, refueling vapors through carbon canister

· Docking Kit for 39-45 feet hulls

· Anchor Kit 39-45 feet hulls

· Drawing package(s)

· Operator/repair manual(s)

CLIN 003: SAFE BOATS International 38 feet full cabin a.k.a.”DEFENDER” with Boatmaster Aluminum 21,000lb GVRW, trailer for SAFE 3812 Hulls.

Intended Use: All proposed boats must be suitable for the intended use. All boats in this CLIN will be used to execute counter narcotics maritime interdiction operations in Colombian territorial waters for the Colombian Navy Coast Guard. These boats will be primarily used at sea during day and night time in high-speed persecutions under inclement weather and rough sea state conditions where construction material (aluminum 5086), hull and deck design compliance with ABS high speed structural requirements, design features such as angled stringer system, steeped transom, planning shoe, strake design, and performance fin, Safety of life at sea (SOLAS) features, water tightness integrity, stability, agility, performance, dependability, durability, payload capability, engine power, fuel capacity, top speed, range, communications, navigation and surveillance equipment are paramount to the function of the solicited items.

The requirements are outlined below:

A. Minimum Requirements

Mercury engine rigging with hydraulic power assist steering

· 5/16 inch– 5086 bottom plate with SAFE Boats exclusive stringer system with angled transverse framing

· Reinforced keel beaching plate

· Stepped transom with speed shoe in bottom plate

· Performance wings below collars for increased lift and stabilization while maneuvering

· Fully welded performance lifting strakes

· Self bailing decks with high volume scupper drains

· Forward cockpit with self draining decks

· Bow storage/anchor locker with aft facing door.

· Dual aft rigging locker system with topside access

· Transom inspection hatch

· Sacrificial hull anode(s)

· Reinforced push knees

· Reinforcement of a SAFE 38 Hull

· Black nonskid paint

· Cuddy with bench seating

· Weather tight cuddy access hatch

· Sliding side aft windows

· Overhead spotter windows (tinted)

· Safety glass used in all windows

· Overhead cuddy ceiling hatch

· Swing down radar pod

· Safety hand/grab rail system with black rubberized rail wrap

· Two-tier removable outboard motor guard with fairleads

· Gray rubberized rail wrap

· Warm weather passive air system in main cabin

· SBI universal gun locks installed in aft cabin

· Overhead instrument panel

· Gray rubberized dash skid

· Positions 3 and 4 - Bentley shock mitigating seats with seat belts fore/aft and height adjustments

· Port and starboard aft jump seat/storage boxes with upholstered cushions

· Port and starboard cuddy benches with upholstered cushions

· Remove Bentley suspension seat

· Allsalt 4800 suspension seat, fore/aft/height adjust, lap belt, black upholstery

· Upgrade SAFE XDR collars with additional black rub strake & doubled collar material on aft section

· Black rubberized dash skid

· Marine grade carpet and insulation

· Upholstered headliner

· Black mesh snap covers on interior storage box openings

· Rubberized deck matting on interior walking surfaces

· Custom fabricated weld-on pick eyes with stainless steel inserts

· Weld-on bow eye with triple stainless-steel inserts

· Weld-on transom tie downs

· Forward tow post with single stainless steel cross pin

· Motor guard/tow line guide

· Blue Sea 360 marine grade breaker system

· Backlit switch panel with marine grade switches

· Five (5) 12VDC power receptacles – one on gauge pod two (2) on dash and two (2) on arch.

· Self-parking intermittent windshield wiper system with washer

· 110VAC Shore Power Kit - 4 Battery System with Pronautic

· Additional house battery wired in parallel with existing 12VDC house battery creating a dual bank, 12VDC, single house battery bank

Lighting

· LED navigation lights (running and anchor)

· Independently controlled interior/exterior dimmable LED walkway lights

· Three (3) red/white dome lights - two (2) in cabin, one (1) in cuddy

· Four (4) flood lights - one (1) port, one (1) starboard and two (2) aft deck

· One (1) 12VDC rechargeable flashlight

· Two (02) Whelen L22 LED law enforcement strobes, 12VDC, blue with one (1) weld on pod installed

· Magnetic compass with dimmable backlighting

· C-Map NT chart, chart cartography (unlock codes) for all of Colombia MM3-VSA-500 C-map chart pack and MM3-VNA-027 C-map chart

· Furuno DRS6AX 6kW UHD digital radar for TZ touch & TZ Touch2 with 3.5 inches open array & 12/24V DC converter

· Two (02) Furuno Nav Net TZ T12F TZ touch 3 chart plotter and fish finder 12 inches hybrid control IPS display

· Furuno GP330B GPS/WAAS sensor - NMEA 2000 compatible antenna for stand alone GPS on NAVNET 3D

· Furuno PG700 NMEA2000 Rate Compensated Heading Sensor

· Furuno FA70 Black Box Class B AIS Transponder with Shakespeare skinny mini 36 inches AIS VHF Antenna.

· FLIR M364C dual payload stabilized 640 thermal 24 deg FoV & HD color low-light camera with JCU1 PoE injector kit, weld on camera bracket and space & power reservations for FLIR M camera

· Icom M605 VHF marine transceiver with Shakespeare PHASE III 6225 8 feet VHF Antenna with SS ratchet mount

· Icom IC A-220 VHF air band receiver with antenna

· Whelen loudhailer system. WPA112, WPA3, SA315

· Furuno HUB102 5-port ethernet hub, for use with NavNet series MFD's

· SS60 0 Degree SS 600W thru-hull transducer

· One (01) ACR RCL-100 LED Remote Control Searchlight, 220,000 CD, 12/24VDC with space and power reservations & (1) Weld on pod to accommodate the searchlight

· Life ring mount

· Cabin dewatering pump, 1100GPH

· CO detector(s) mounted in cabin

· Telescoping swim ladder mounted on outboard bracket

· ACR 2851 GlobalFix V5 category I EPIRB with integral GPS/AIS and automatic release bracket

· EPA-compliant fill and vent system with integrated check-valves, refueling vapors through carbon canister

· Docking Kit for 39-45 feet hulls

· Anchor Kit 39-45 feet hulls

· Drawing Package(s)

· Operator/Repair Manual(s)

CLIN 004: SAFE BOATS International 38 feet full cabin a.k.a.”DEFENDER” Quantity: TBD

Intended Use: All proposed boats must be suitable for the intended use. These boats will be primarily used at sea during day and night operations in high-speeds under inclement weather and rough sea state conditions where construction material (aluminum 5086), hull and deck design compliance with ABS high speed structural requirements, design features such as angled stringer system, steeped transom, planning shoe, strake design, and performance fin, Safety of life at sea (SOLAS) features, water tightness integrity, stability, agility, performance, dependability, durability, payload capability, engine power, fuel capacity, top speed, range, communications, navigation and surveillance equipment are paramount to the function of the solicited items.

The requirements are outlined below:

A. Minimum Requirements

Engines rigging Power assist steering

5/16″ – 5086 bottom plate with reinforced beaching plate Stepped transom with speed shoe in bottom plate Performance wings below collars for increased lift and stabilization while maneuvering Fully welded performance lifting strakes Self-bailing decks with high-volume scupper drains Forward anchor locker Dual aft locker system with topside access stowage and front side rigging access Transom inspection hatch Sacrificial hull anode(s)

Fixed windscreen Swing down radar pipe arch Safety hand/grab rail system

Seat storage box/cooler in front of console

Aft storage bolster with large aft-facing gasketed aluminum doors

Marine-grade carpet and insulation

Custom fabricated weld-on pick eyes with stainless steel inserts Weld-on bow eye with triple stainless-steel inserts Weld-on transom tie downs Forward tow post with single stainless steel cross pin

Backlit switch panel with marine-grade switches Four (4) 12VDC power receptacles – two (2) on dash and two (2) on mid console Self-parking, intermittent windshield wiper system with washer

Lighting

LED navigation lights (running, towing and anchor) Dimmable LED walkway lights Three (3) red/white dome lights – two (2) on overhead and one (1) in cuddy - Include high output LED search lights with integrated IR or separate IR light

Navigation Package Thermal/Low Light Camera Systems Loudhailer

AIS

Satellite Weather Receiver/Overlay

VHF/UHF

David Clark Wireless Intercom System

EPIRB

Law Enforcement Lighting Strobes/Bars (blue/red/amber) Searchlight Upgraded Flood Lights Underwater Dive Lights Laptop Mounting/Docking Station(s) Customer Furnished Equipment (CFE) Installation Shore Power

Life ring mount Telescoping swim ladder mounted on outboard bracket

EPA-compliant fill and vent system with integrated check-valves, refueling vapors through carbon canister

Docking Kit Anchor Kit Personnel Flotation Device(s) (PFD)

Topside/Cabin Paint Bottom Paint

Rolling Ship Yard Cradle

Drawing Package(s) Operator/Repair Manual(s)

CLIN 005: SAFEBOATS International 29 feet central console Colombian Marines littoral boats with Trailer, 16000 – 29 feet hulls, aluminum.

Intended Use: All proposed boats must be suitable for the intended use. All boats in this CLIN will be used to execute counter narcotics maritime interdiction operations in Colombian territorial waters for the Colombian Navy Coast Guard. These boats will be primarily used at sea during day and night time in high-speed persecutions under inclement weather and rough sea state conditions where construction material (aluminum 5086), hull and deck design compliance with ABS high speed structural requirements, design features such as angled stringer system, steeped transom, planning shoe, strake design, and performance fin, Safety of life at sea (SOLAS) features, water tightness integrity, stability, agility, performance, dependability, durability, payload capability, engine power, fuel capacity, top speed, range, communications, navigation and surveillance equipment are paramount to the function of the solicited items.

The requirements are outlined below:

A. Minimum Requirements

Stroke V8 30 inches shaft

5/16″ – Marine Grade Aluminum 5086 Polyurethane foam blocks or equivalent material that improves the buoyancy.

Step in Hull - additional step built in at the aft end of the hull which allows for outboard engines to be mounted higher, reducing drag.

Speed Shoe - which is designed and proven to increase efficiency and improve fuel economy Performance Fins - composed of 5086 marine grade aluminum alloy welded to the side plate just above the chine.

Concave Strakes Angled Stringer System Airtight Decks - The complete hull and deck of the vessel is 100% air and watertight.

Raised bow to ensure better protection against waves for littoral operations.

Aluminum tube guard, which surrounds and protects outboard engines.

Aluminum beaching plate at forward/bow section of keel.

Mechanical drop bow for quick disembarking and embarking.

Four (04) lifting points in aluminum Deck: Unobstructed, coated and nonskid applied in transit areas with a minimum of four (4) scuppers designed for adequate drainage of liquids without forward movement (self-bailing) and without depositing directly into any bilge.

Outboard: nonskid material installed on the gunwale and bow.

Draft at maximum payload (including full fuel, crew, engines trimmed completely down) 32 inches

Time to reach max velocity at max acceleration with light load condition 40 seconds

01 Raymarine GA150 GPS, 01 Raymarine CPTS transducer 01 Raymarine EV-1 Heading Sensor 01 Raymarine Quantum 2 Q24D Radar 01 Compass, 01 ACR Global Fix Ipro EPIRB, 01 FLIR M364 Camera Colombian rivers electronic chart

01 Whelen Loudhailer WPA112 01 provisions for Harris Ref. 7800 MMP radio

systems, electronic systems, navigation systems. Foldable radar arch for radar and FLIR camera.

Front access for inspections/maintenance.

Aft tow post to tow other boats of similar or less weight.

30 feet long 5/8 inch braided nylon, color black mooring lines.

100 feet long 3/4 inch double-braided, nylon, color black towing line.

One (01) internal aluminum tank with baffles, high resistant to impact and independent from the boat structure.

Outboard engines OEM recommended water and particles separator.

Type A1 supply hoses and type A2 venting hoses.

Marine environment resistant dual control box with switches, remote engine trim, double clutch wires and throttle control.

Marine specifications cable lugs, terminal and application switches Three separate distribution lines 12 VDC, one for each engine and one for the boat basic electrical system including the drainage system and communications.

Sealed maintenance free batteries with marine type terminals with rubber protectors.

Electric pumps with floating switch, filter system to avoid obstructions, high flexibility hoses for suction and discharge.

150 feet long, 3/8 inch double braided nylon anchor line 150 feet long ¼ double braided buoy line Floating buoy for the anchor.

Operator’s manual, drawings, maintenance schedule, spare parts and user’s manuals of all the installed equipment including engines and accessories.

CLIN 006: Individual boat assessment for corrective maintenance of a SAFEBOATS International 41 feet interceptor a.k.a. “APOSTLE”. Assessment to be performed either in Colombia, Costa Rica, or Panama. Refer to attachment 4 for the list of boats included.

Intended service: Individual boat assessment to be performed immediately before corrective maintenance of the SAFEBOATS International 41 feet interceptor a.k.a. “APOSTLE” including as minimum the following features:

· Hull and Deck to include hull pressurization verification

· Super Structure

· Console and Dash

· Collar system

· Coatings, Coverings and Lettering

· Towing, Lifting and Attachment Points

· Electrical System and Power Generation to include equipment electric insulation

· Lighting

· Electronics, Navigation and Communication

· Safety, Rescue and Diving Equipment

· Fuel System

· Propulsion

· Electronics

Contractor shall deliver for COR’s approval a technical report with the assessment’s results including a detailed list of the inspected elements with status description and technically supported description of the recommended action. The government reserves the right to exclude contractors recommended repairs based on the technical report results.

Unit price shall include a complete breakout of all costs, labor, materials, disassembly, complete cleaning; all inspection tasks, all required nondestructive testing, reassembly, all testing and adjustments, all functional testing of installed accessories and assemblies, all consumables for complete maintenance, all hardware used, equipment repairs and/or replacement if required, filters replacement, oil sampling, harbor trials (HAT) and sea trials (SAT).

CLIN 007: Corrective maintenance for the SAFEBOATS International 41 feet interceptor a.k.a. “APOSTLE” to be performed either in Colombia, Costa Rica, Ecuador, or Panama.

Intended service: Perform recommended corrective maintenance based on the results of the individual boat assessment in CLIN 5 for one (1) SAFEBOATS International 41 feet interceptor a.k.a. “APOSTLE”.

Unit price shall include a complete breakout of all costs, labor, materials, disassembly, complete cleaning; all inspection tasks, all required nondestructive testing, reassembly, all testing and adjustments, all functional testing of installed accessories and assemblies, all consumables for complete maintenance, all hardware used, equipment repairs and/or replacement if required, filters replacement, oil sampling, harbor trials (HAT) and sea trials (SAT).

CLIN 008: Individual boat assessment for corrective maintenance of a SAFEBOATS International 38 feet full cabin a.k.a “DEFENDER”. Assessment to be performed either in Colombia, Costa Rica, or Panama. Refer to attachment 4 for the list of boats included.

Quantity: TBD in each order

Intended service: Individual boat assessment to be performed immediately before corrective maintenance of the SAFEBOATS International 38 feet full cabin a.k.a. “DEFENDER” including as minimum the following features:

· Hull and Deck to include hull pressurization verification

· Super Structure

· Console and Dash

· Collar system

· Coatings, Coverings and Lettering

· Towing, Lifting and Attachment Points

· Electrical System and Power Generation to include equipment electric insulation

· Lighting

· Electronics, Navigation and Communication

· Safety, Rescue and Diving Equipment

· Fuel System

· Propulsion

· Electronics

Contractor shall deliver for COR’s approval a technical report with the assessment’s results including a detailed list of the inspected elements with status description and technically supported description of the recommended action. The government reserves the right to exclude contractors recommended repairs based on the technical report results.

Unit price shall include a complete breakout of all costs, labor, materials, disassembly, complete cleaning; all inspection tasks, all required nondestructive testing, reassembly, all testing and adjustments, all functional testing of installed accessories and assemblies, all consumables for complete maintenance, all hardware used, equipment repairs and/or replacement if required, filters replacement, oil sampling, harbor trials (HAT) and sea trials (SAT).

CLIN 009: Corrective maintenance for the SAFEBOATS International 38 feet full cabin a.k.a. “DEFENDER” to be performed either in Colombia, Costa Rica, or Panama.

Intended service: Intended service: Perform recommended corrective maintenance based on the results of the individual boat assessment in CLIN 7 for one (1) SAFEBOATS International 38 feet full cabin a.k.a. “DEFENDER”.

Unit price shall include a complete breakout of all costs, labor, materials, disassembly, complete cleaning; all inspection tasks, all required nondestructive testing, reassembly, all testing and adjustments, all functional testing of installed accessories and assemblies, all consumables for complete maintenance, all hardware used, equipment repairs and/or replacement if required, filters replacement, oil sampling, harbor trials (HAT) and sea trials (SAT).

CLIN 010: Individual boat assessment for corrective maintenance of a SAFEBOATS International 29 feet central console Colombian Marines littoral boat. Assessment to be performed either in Colombia, Costa Rica, or Panama. Refer to attachment 4 for the list of boats included.

Quantity: TBD in each order

Intended service: Individual boat assessment to be performed immediately before corrective maintenance of the SAFEBOATS International 29 feet central console Colombian Marines littoral boat including as minimum the following features:

· Hull and Deck to include hull pressurization verification

· Super Structure

· Console and Dash

· Collar system

· Coatings, Coverings and Lettering

· Towing, Lifting and Attachment Points

· Electrical System and Power Generation to include equipment electric insulation

· Lighting

· Electronics, Navigation and Communication

· Safety, Rescue and Diving Equipment

· Fuel System

· Propulsion

· Electronics

Contractor shall deliver for COR’s approval a technical report with the assessment’s results including a detailed list of the inspected elements with status description and technically supported description of the recommended action. The government reserves the right to exclude contractors recommended repairs based on the technical report results.

Unit price shall include a complete breakout of all costs, labor, materials, disassembly, complete cleaning; all inspection tasks, all required nondestructive testing, reassembly, all testing and adjustments, all functional testing of installed accessories and assemblies, all consumables for complete maintenance, all hardware used, equipment repairs and/or replacement if required, filters replacement, oil sampling, harbor trials (HAT) and sea trials (SAT).

CLIN 011: Corrective maintenance for the SAFEBOATS International 29 feet central console Colombian Marines littoral boat to be performed either in Colombia, Costa Rica, or Panama.

Intended service: Intended service: Perform recommended corrective maintenance based on the results of the individual boat assessment in CLIN 7 for one (1) SAFEBOATS International 29 feet central console Colombian Marines littoral boat.

Unit price shall include a complete breakout of all costs, labor, materials, disassembly, complete cleaning; all inspection tasks, all required nondestructive testing, reassembly, all testing and adjustments, all functional testing of installed accessories and assemblies, all consumables for complete maintenance, all hardware used, equipment repairs and/or replacement if required, filters replacement, oil sampling, harbor trials (HAT) and sea trials (SAT).

CLIN 012: Overhaul maintenance of one (01) SAFEBOATS International 41 feet interceptor a.k.a. “APOSTLE” to be performed either in Colombia, Costa Rica, or Panama.

Quantity: TBD in each order

Intended service: Overhaul maintenance for the SAFEBOATS International 41 feet interceptor a.k.a. “APOSTLE” to include as minimum the following:

· Hull and Deck to include annual hull pressurization verification

· Super Structure

· Console and Dash

· Collar system to include collar protective membrane replacement and/or collar expandible foam replacement

· Coatings, Coverings and Lettering

· Towing, Lifting and Attachment Points

· Electrical System and Power Generation to include equipment electric insulation

· Lighting

· Electronics, Navigation and Communication

· Safety, Rescue and Diving Equipment

· Fuel System

· Propulsion

· Electronics

Unit price shall include a complete breakout of all costs, labor, materials, disassembly, complete cleaning; all inspection tasks, all required nondestructive testing, reassembly, all testing and adjustments, all functional testing of installed accessories and assemblies, all consumables for complete maintenance, all hardware used, equipment repairs and/or replacement if required, filters replacement, oil sampling, harbor trials (HAT) and sea trials (SAT).

CLIN 013: Overhaul maintenance of one (01) SAFEBOATS International 38 feet full cabin a.k.a. “DEFENDER” to be performed either in Colombia, Costa Rica, or Panama.

Quantity: TBD in each order

Intended service: Overhaul maintenance for one (01) SAFEBOATS International 38 feet full cabin a.k.a. “DEFENDER” to include as minimum the following features:

· Hull and Deck to include annual hull pressurization verification

· Super Structure

· Console and Dash

· Collar system to include collar protective membrane replacement and/or collar expandible foam replacement

· Coatings, Coverings and Lettering

· Towing, Lifting and Attachment Points

· Electrical System and Power Generation to include equipment electric insulation

· Lighting

· Electronics, Navigation and Communication

· Safety, Rescue and Diving Equipment

· Fuel System

· Propulsion

· Electronics

Unit price shall include a complete breakout of all costs, labor, materials, disassembly, complete cleaning; all inspection tasks, all required nondestructive testing, reassembly, all testing and adjustments, all functional testing of installed accessories and assemblies, all consumables for complete maintenance, all hardware used, equipment repairs and/or replacement if required, filters replacement, oil sampling, harbor trials (HAT) and sea trials (SAT).

CLIN 014: Overhaul maintenance of one (01) SAFEBOATS International 29 feet central console Colombian Marines littoral boat to be performed either in Colombia, Costa Rica, Ecuador, or Panama.

Intended service: Corrective maintenance for the SAFE BOATS INTERNATIONAL 29 feet central console Colombian Marines littoral boats to include as minimum the following features:

· Hull and Deck to include annual hull pressurization verification

· Super Structure

· Console and Dash

· Collar system to include collar protective membrane replacement and/or collar expandible foam replacement

· Coatings, Coverings and Lettering

· Towing, Lifting and Attachment Points

· Electrical System and Power Generation to include equipment electric insulation

· Lighting

· Electronics, Navigation and Communication

· Safety, Rescue and Diving Equipment

· Fuel System

· Propulsion

· Electronics

Unit price shall include a complete breakout of all costs, labor, materials, disassembly, complete cleaning; all inspection tasks, all required nondestructive testing, reassembly, all testing and adjustments, all functional testing of installed accessories and assemblies, all consumables for complete maintenance, all hardware used, equipment repairs and/or replacement if required, filters replacement, oil sampling, harbor trials (HAT) and sea trials (SAT).

CLIN 015: Spare parts and replacement equipment for the SAFEBOATS International 41 feet interceptor a.k.a. “APOSTLE”, SAFEBOATS International 38 feet full cabin a.k.a. “DEFENDER”, and SAFEBOATS International 29 feet central console Colombian Marines littoral boats to include as minimum the spare parts and replacement equipment included in the Price Schedule PS0054 per the following constructive groups:

· Navigation and communications equipment.

· Fuel system

· Hydraulic system

· Propulsion system

· Collar system

· Steering system

· Trailers

Quantity: TBD in each order

Intended use: Replace damaged equipment in the existing SAFEBOATS interceptor fleet and trailers to maintain the highest operational readiness rate.

1.3 Delivery and acceptance

For line-item numbers 1 through 3

FOB Destination. Contractor shall deliver the requested boats to the delivery location as soon as possible.

The Contractor shall provide full destination services (shipping, custom clearance, temporary warehousing, local delivery, loading/offloading at final destination). Cost of delivery is to be included / not separately priced (NSP).

Contractor shall coordinate all deliveries with the designated COR(s). Partial deliveries are acceptable if approved in writing by the COR. The Contractor shall provide an itemized commercial invoice of all cargo prior to delivery.

Delivery POC Name and Contact Information: To be provided for each order.

Delivery Location in Colombia: Cartagena and/or Buenaventura ports.

Delivery Location in Costa Rica: TBD Delivery Location in Panama: TBD

For services in line-item numbers 4 through 12

Colombia boat assessments and maintenance services to be performed in Cartagena and/or Buenaventura

Costa Rica boat assessments and maintenance services to be performed in TBD

Panama boat assessments and maintenance services to be performed in TBD

Intervened boats satisfactory pass the harbor acceptance trials (HAT) and sea acceptance trials (SAT).

1.4 Warranties

SAFE Boats International, LLC (“SBI”), for the time periods detailed in the table below warrants that

1) all SBI manufactured products conform to SBI’s specifications and are free of any defect in materials or workmanship

2) All SBI provided equipment has been properly installed. The coverage period is measured from the date of acceptance of the vessel. Original Manufacture Equipment is warranted by the respective manufacturer.

HULL

10 years from the acceptance of the Vessel

FUEL TANK

5 Years from the acceptance of the Vessel

SUPERSTRUCTURE

2 years from the acceptance of the Vessel

COLLAR SYSTEM

2 years from the acceptance of the Vessel

Warranty work to be performed at the Consumer’s location, or the facility of an authorized SBI agent.

SBI shall provide a detailed procedure to submit warranty claims.

Warranty costs are Not Separately Priced.

Section 2 – Special Conditions

2.1. INL Source – Nationality Restrictions

Not applicable.

2.2. Type of BPA Call

Firm Fixed Price (FFP) call order(s) payable entirely in US dollars (USD). No additional sums will be payable for any escalation in the cost of performance or because of the Contractor's failure to properly estimate or accurately predict the difficulty of completing this delivery order. The Government will not adjust the delivery order price due to fluctuations in exchange rates.

2.3. Taxes and Import Duties

This requirement is a part of technical assistance project registered with the Government of Colombia, which is not subject to taxation. USG will provide all necessary project registration documents for vendor to claim tax and import duty exemptions in Colombia upon request. All requests must be submitted in writing to the order designated COR.

This requirement is a part of technical assistance project registered with the Government of (Costa Rica, Panama), which is not subject to taxation. USG will provide all necessary project registration documents for vendor to claim tax and import duty exemptions in (Costa Rica, Panama) upon request. All requests must be submitted in writing to the order designated COR.

2.4. Government Furnished Property (GFP)

The Department of State (DoS) will make the following GFP available for performance of this delivery order:

In Colombia TBD In Costa Rica: TBD In Panama: TBD In Ukraine: TBD

2.5. Government Furnished Information (GFI)

The Department of State (DoS) will make the following GFI available for performance of this delivery order: None.

2.6. Host Country Provided Support

The host country will provide the following support for performance of this BPA: None.

Section 3 – Basis for Selection

3.1. Eligibility for Award

The Contracting Officer may issue an award to the contractor with the lowest proposed priced. In addition to price, the Government will consider the following factors when selecting contractor for award.

1. Boats Specifications

2. Delivery and Logistics Plan

3. Warranty Terms and Service Locations

4. Price

If the contractor expects to recruit Third Country National (TCNs) for performance of this project, the contractor must submit a Recruitment Plan. If the contractor expects to provide employer-furnished housing for performance of this project, the contractor must submit a Housing Plan. Should these plans be required, a contractor must submit acceptable plans to be eligible for award.

3.3. Issuance of Delivery (CALL) Order

The government will submit a request for quote/proposal for each call order placed against the BPA. Quotes submitted by the contractor shall be in accordance with the pricing contained in the BPA (pricing schedule).

The Government reserves the right to issue a call order for less than the quantity on which your quote/proposal is based, at the quoted price, unless you tell us in your cover letter that you will not accept a delivery order on that basis.

Section 4 – Instructions and Notices

To assure timely and fair consideration of your delivery order proposal, you must follow the instructions contained herein. Call order proposals must be complete, self-sufficient, and respond directly to the requirement of this BPA. Failure to provide requested information in the format specified in this section may result in an unfavorable evaluation or non-consideration of your company’s delivery order proposal.

Your Call order proposal must be based on the terms of the underlying Blanket Purchase Agreement (BPA). The Government may reject any delivery order proposal that is not based on these terms in every respect.

4.1. Delivery Order Proposal Due Date and Time

TBD

1. Appendix A - List of boats

Defender: