184170Utilitybody.xls
XLS spreadsheet 39 KB Posted
- Attached to
- Utility body with crane for 184-170
- Solicitation number
- RFQ - 18P - 12061200000000001082
- Issued by
- Kennebec County, Maine
About this file
This is a specifications document for a utility body with integrated crane system for the State of Maine, detailing the requirements for SPEC# 184-170. The project involves the procurement of one heavy-duty galvanized steel service body to be installed on a 2012 Chevy Sierra 3500HD truck. The service body features a 108-inch length with a low-profile 36-inch cabinet height and includes a 2,000-pound capacity electric crane mounted on the left rear compartment with manual boom extension capabilities from 4 to 7 feet. The body includes multiple compartments configured in a V-style layout on both curb and street sides, with front, horizontal, and rear compartments featuring adjustable shelves and comprehensive weatherstripping. Installation and delivery are to be completed at the Augusta location, with the vehicle to be picked up, serviced, and returned to the contracting entity.
The specifications require all-stainless-steel hardware including latches, hinges, and locks, with galvanized or equivalent galvanneal coating on all steel surfaces and exterior painting in GM Greystone Metallic. The body must include FMVSS-compliant lighting, a Class IV trailer hitch rated for 5,000-pound weight carrying capacity, and a 12-volt DC electric winch system with master disconnect and overload protection. Additional accessories specified include a backup alarm, 7-way RV-style trailer connector with integral electric brake controller, and mud flaps. The manufacturer must provide a minimum 5-year rust-through warranty and complete automotive-type undercoating. Bidders are required to include installation and delivery costs in their proposals, with all electrical connections sealed using heat shrink tubing and heavy-duty wire loom, explicitly prohibiting Scotch-Lok style connectors.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| PAYMENT METHOD (2).doc | DOC document | |
| Solicitation_terms.doc | DOC document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Sheet1
| SPEC# 184-170 | STEEL SERVICE BODY | ||||||
| GENERAL DESCRIPTION | Heavy duty galvanized steel service body, fully welded construction. All stainless steel latches, hinges, and hardware. | ||||||
| MINIMUM SPECIFICATIONS | |||||||
| APPLICATION | 2012 Chevy Sierra 3500HD, DRW, Regular cab, 4X2, 6.0 Litre, 13,200 GVW, " WB, cab to axle: 60" | ||||||
| BODY SIZE | Length: 108" Width: 95-3/4" Cabinet Height: 36" (Low Profile) | ||||||
| BODY SHELL | 14 gauge two-sided galvanized steel. Compartment top and back to be one piece seamless design. Drip rails above all doors. All doors, door openings, drip rails, and other exposed steel edges to be hemmed for strength and safety. Undercoated steel rock guards at rear of wheel wells. Front compartment/body aluminum rock guards. Mud flaps front and rear of tires. 12 Gauge full height tread plate on inside of load space sides and front. | ||||||
| FLOOR | 50" Standard treadplate with four 14 gauge floor stiffeners interlaced with crossmembers | ||||||
| TAILGATE | 12" Slammable tailgate, pickup style release handle in the center, 14 gauge double panel construction, parallel to floor when in the down position | ||||||
| COMPARTMENTS CONSTRUCTION | Left rear compartment to be reinforced to support a 2000lb capacity electric crane. Crane to be installed as close to the outside edge as structurely possible to allow maximum swing room for buoy anchors. 12 Gauge tread plate on top of both sides. Side compartment back panel overlaps and interlocks with floor flange for compartment weight support. 20 gauge 2 sided galvanized steel double panel exterior doors with 2 stage slam type rotary latches, rotary locks, heavy duty adjustable strikers, theft proof replaceable hinges, keyed alike locks. Spring loaded over-center door retainers on vertical doors. Double chains or cables on all horizontal doors. Heavy duty, closed cell automotive type weatherstripping continuous with no break for door latches. Shelves to be 18 gauge galvanized, hemmed, rated for 250lb. capacity, with twenty shelf dividers. Drains & vents in all compartments. Note-All locks, latches, hinges, and any other hardware to be stainless steel!! | ||||||
| COMPARTMENTS LAYOUT | Both Curb & Street Sides: (V Style configuration) Front Compartment= 36"h x 33"w x 20"d with two adjustable shelves per side. Horizontal compartment=15"h x 46"w x 20"d with one adjustable shelf per side. Rear Compartment=36"h x 29"w x 20"d with one adjustable shelf per side. | ||||||
| CRANE | 2,000lb (6,500 ft.lb.) Capacity, 1500lbs Capacity at 4', manual boom extension from 4' to 7', 900 lb capacity at 7', 3 Position vertical boom adjustment-0 degrees to +21 degrees to +56 degrees, 340 degree manual rotation, stowed height 30" short tower, 40' of 3/16" galvanized cable with crane hook and snatch block to meest ANSI B30.5, 12 volt DC electric planetary winch with master disconnect & capacity overload system, winch brake for static & dynamic load controls, 12' pendant control. No jack leg support or spring reinforcement needed. | ||||||
| LIGHTS | FMVSS lighting package. Quick connect loomed wiring harness. Flush mounted tail and backup lights with light guards, clearance lights and reflectors. License plate light with bracket. | ||||||
| PAINT | All steel surfaces galvanized or equivalent galvanneal coating. Exterior GM paint code "16U" (Greystone Metallic). Cabinet interior color to be white or reflective gray. Multi coat chromate primer, acrylic urethane top coat. Complete automotive type undercoating of body and substructure underside. Minimum 5 year rust-thru warranty. | ||||||
| BUMPER & TRAILER HITCH | 8" steel tread plate step (no recess), Class IV trailer hitched rated for a minimum 5000 lbs weight carrying, Towing height must be 22"-please locate reciever accordingly! | ||||||
| FUEL FILL CONE | Aluminum fuel cup | ||||||
| INSTALLATION | Vehicle to be picked up at our location in Augusta, items installed, and vehicle returned to CFM in Augusta. (Please include in bid!!) All electrical connections to be sealed with heat shrink and fully protected with heavy duty wire loom. Absolutely no "Scotch-Lok" style connectors | ||||||
| ACCESSORIES | Back up Alarm, 7 way RV style trailer connector (Integral Electric brake controller equipped from factory). | ||||||
| MAKE | Model | ||||||
| Possible Quantity | Unit Cost | Total Cost | |||||
| 1 | |||||||
| Bidder (Vendor) | Contact Person | Contact's Telephone | |||||
| VENDOR COMMENTS | |||||||
| ESTIMATED TIME FOR DELIVERY: |
Sheet2
Sheet3
File details come from the government source that posted it. Updated .