Page 1 of 53ORDER NUMBER:

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, & 30

1. REQUISITION NUMBER PAGE 1 OF

2. CONTRACT NO. 3. AWARD/EFFECTIVE

DATE

4. ORDER NUMBER 5. SOLICITATION NUMBER 6. SOLICITATION ISSUE

DATE

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME b. TELEPHONE NUMBER (No collect calls)

8. OFFER DUE DATE/

LOCAL TIME

9. ISSUED BY

13b. RATING

14. METHOD OF SOLICITATION

CODE

15. DELIVER TO 16. ADMINISTERED BY CODE

18a. PAYMENT WILL BE MADE BY CODE17a. CONTRACTOR/

OFFEROR

CODE

FACILITY

CODE

CODE

TELEPHONE NO.

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN

OFFER

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK

BELOW IS CHECKED

RFQ IFB RFP

SEE ADDENDUM

19.

ITEM NO.

20.

SCHEDULE OF SUPPLIES/SERVICES

21.

QUANTITY

22.

UNIT

23.

UNIT PRICE

24.

AMOUNT

(Use Reverse and/or Attach Additional Sheets as Necessary)

25. ACCOUNTING AND APPROPRIATION DATA 26. TOTAL AWARD AMOUNT (For Govt. Use Only)

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED

29. AWARD OF CONTRACT: REF. OFFER

DATED . . YOUR OFFER ON SOLICITATION

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

30a. SIGNATURE OF OFFEROR/CONTRACTOR

30b. NAME AND TITLE OF SIGNER (Type or print) 30c. DATE SIGNED

31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)

31b. NAME OF CONTRACTING OFFICER (Type or print) 31c. DATE SIGNED

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA - FAR (48 CFR) 53.212

10. THIS ACQUISITION IS UNRESTRICTED OR

NAICS:

SIZE STANDARD:

13a. THIS CONTRACT IS A

RATED ORDER UNDER

DPAS (15 CFR 700)

SET ASIDE: % FOR:

11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

12. DISCOUNT TERMS

ARE ARE NOT ATTACHED

ARE ARE NOT ATTACHED

27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1, 52.212-4. FAR 52.212-3 AND 52.212-5 ARE ATTACHED. ADDENDA

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA

Coll. No.

8 (A)

EDWOSB

WOMEN-OWNED SMALL BUSINESS

(WOSB) ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

HUBZONE SMALL

BUSINESS

SMALL BUSINESS

FLT000926

Wayne Mayfield 304-379-5356

VIM1

VIM1

391014499

UNDETERMINED SOURCE

NA BLANK

WASHINGTON DC 20534

UNICOR FPI CENTRAL ACCOUNTS PAYABLE

PO BOX 11849

LEXINGTON, KY 40578-1849

1600003690 See Section B

UNICOR FUNDS 15X4500 FUNDS SHALL BE OBLIGATED BY INDIVIDUAL DELIVERY ORDERS AND NOT BY THE CONTRACT ITSELF

Wayne Mayfield

X

06/16/2026

06/23/2026

10:00 AM

VIM1

VICTORVILLE UPFIT

13777 AIR EXPRESSWAY BLVD

VICTORVILLE CA 92394-0510

VICTORVILLE UPFIT

13777 AIR EXPRESSWAY BLVD

VICTORVILLE CA 92394-0510

06/16/2026

VICTORVILLE UPFIT

13777 AIR EXPRESSWAY BLVD

VICTORVILLE CA 92394-0510

06/16/2026

Page 2 of 53ORDER NUMBER:

SECTION B

SUPPLIES OR SERVICES AND PRICES/COSTS

Item No. SUPPLIES OR SERVICE Quantity U/M UNIT PRICE AMOUNT IN US$ Delivery Date

Terms:

00001 ADH0023 150 EA 07/24/2026

732-SILICONE-RUBBER-SEALANT,CLEAR,10OZ.

MATERIAL:

THIS IS A 732 SILICONE RUBBER SEALANT THAT CURES TO TOUGH,

FLEXIBLE SEAL

SPECIFICATIONS:

RTV Silicone Based Formula

Fast Curing

Skins And Ready For Assembly In 10 To 15 Minutes

Full Cure In 24 Hours

Adheres To Metal, Wood, Plastic, Ceramic, Concrete, Etc.

Chemical Restant Compound Withstands Oil, Grease, Hydraulic Fluid

Glycol, And Water Mixtures

Weatherproofing Agents Withstands Most All Enviroments

Long Service Life

Gel Flowing Chemistry That Fills Uneven Surfaces And Assures A

Positive Seal

COLOR: Clear

CONTENTS: 10.1 fl. oz. Caulk Tube

TEMPERATURE RANGE: -60 Degree F To 450 Degree F

USDA RATING: P1

Page 3 of 53ORDER NUMBER:

BSBM LAST DATA TEXT REVISION 4-26-12

00002 ADH0328 350 EA 07/24/2026

MEDIUM-STRENGH,THREAD-LOCKER,CAPSULE-242

MATERIAL:

THIS IS A BLUE LIQUID THREADLOCKER USED ON THREADED

FASTENERS TO PREVENT LOOSENING.

SPECIFICATIONS:

* TYPE: THREADLOCKER.

* CONTAINER SIZE: SMALLER THAN 1oz. ( .5-ml.)

* FORM: LIQUID.

* STRENGHT: MEDIUM

* CONTAINER TYPE: BOTTLE

* SERIES: 242

* SERIES PART #: 24221 (MUST BE EQUIVALENT)

* REMOVAL METHOD: HAND TOOL; HEAT

* FULL CURE TIME: 24:00

* MAXIMUM SERVICE TEMP.: 300.00

00003 ADH0505 8 EA 07/24/2026

LIQUID-NAILS,ADHESIVE TO BE USED FOR ADHESION OF

PLYWOOD FOR M129A2C BOX TRAILERS.

VENDOR:H AND E CENTERS

PART NUMBER:2207860172

00004 AHW0001 332 EA 07/24/2026

SPACER,NYLON,OD-0.5",ID-0.14"

Page 4 of 53ORDER NUMBER:

DESCRIPTION:

THIS IS A SPACER FOR #6 SCREW SIZE, NYLON,

PLAIN, 1/4" OVERALL LG, 0.14" INSIDE DIA.

SPECIFICATIONS:

SPACER TYPE- ROUND

MATERIAL- NYLON

FINISH- PLAIN

COLOR- BLACK

INSIDE DIAMETER- 0.14 in

OUTSIDE DIAMETER- 0.5 in

OVERALL LENGTH- 1/4 in

***MUST BE EQUIVALENT TO GRAINGER PART# 13SP213B***

00005 AHW0732 100 EA 07/24/2026

CABLE-TIES,NYLON,BLACK,11-7/8"L,.30"W

MATERIAL:

THIS IS A HEAVY DUTY BLACK CABLE TIE

2011 SPECIFICATIONS:

Natural Nylon 6/6

RU-UL Recognized

QPL Listed

COLOR: Black

BUNDLE DIAMETER RANGE: 3/16-3 Inch

LENGTH: 11 7/8 Inch

WIDTH: .30 Inch

MIN. LOOP TENSILE STRENGTH: 120 Pounds

TEMPERATURE RANGE: -40 Degrees To 185 Degrees F

MUST BE EQUIVALENT TO BARNES PART NUMBER (KP4831)

00006 AHW0751 1,100 EA 07/24/2026

SPACER,NYLON,OD-.625",ID-.281"

DESCRIPTION:

Page 5 of 53ORDER NUMBER:

THIS IS A BLACK NYLON SPACER, PLAIN,

.25" OVERALL LG, .281" INSIDE DIA.

SPECIFICATIONS:

SPACER TYPE- ROUND

MATERIAL- NYLON

FINISH- PLAIN

COLOR- BLACK

INSIDE DIAMETER- .281 in

OUTSIDE DIAMETER- .625 in

OVERALL LENGTH- .25 in

00007 AHW2201 41 EA 07/24/2026

BUTT-CONNECTOR,NON-INSULATED,6GA

MATERIAL:

THIS IS A NON-INSULATED BUTT CONNECTOR

2011 SPECIFICATIONS:

Constructed Of ETP Copper

Funnel Entry

Operating Temperature: 350 Degrees F

WIRE SIZE: 6

MUST BE EQUIVALENT TO MSC PART# 54057310

00008 AHW2202 2,725 EA 07/24/2026

BUTT-CONNECTOR,NON-INSULATED,8GA

MATERIAL:

THIS IS A NON-INSULATED BUTT CONNECTOR

2011 SPECIFICATIONS:

Constructed Of ETP Copper

Funnel Entry

Operating Temperature: 350 Degrees F

WIRE SIZE: 8

Page 6 of 53ORDER NUMBER:

MUST BE EQUIVALENT TO GRAINGER PART# M8BCK

00009 AHW6482 6 CT 07/24/2026

SPLIT-WIRE-LOOM,STANDARD,BLACK,1"

ALL SPECIFICATIONS LISTED BELOW ARE MANDATORY!

SPECIFICATIONS:

THIS IS A CONVOLUTED SLEEVING USED FOR WIRE AND CABLE

ROUTING IN CAR, BOAT, TRAILER AND TRUCK APPLICATIONS.

1. Conduit-LIke Convoluted Sleeving.

2. Made Of Polyethylene.

3. Split For Easy Wire And Cable Insertion.

4. Will Not Gap When Bent.

5. Solvent And Acid Resistant.

6. Weather Resistant.

7. Abrasion Resistant.

8. UV Stable For Outdoor Use.

9. COLOR: Black

10. INNER DIAMETER (ID): 1 Inch

11. NOM. INNER DIAMETER: 1.00 Inch

12. NOM. OUTER DIAMETER: 1.280 Inch

13. TEMPERATURE RANGE: -40 Degrees To +200 Degrees F

BSBM LAST DATA TEXT REVISION 11-20-12

00010 AHW8282 385 FT 07/24/2026

RUBBER-EDGE-TRIM,NEOPRENE,15/32"

MATERIAL:

THIS IS A NEOPRENE RUBBER EDGE TRIM USED TO COVER EXPOSED

OR UNFINISHED METAL, PLASTIC, WOOD, AND GLASS EDGES

Page 7 of 53ORDER NUMBER:

2011 SPECIFICATIONS:

Neoprene Rubber

Medium-Hard With A Durometer Hardness Of 45A-70A

Has Good Fuel, Water, And Ozone Resistance

For Indoor And Outdoor Use

Rounded Edges

TEMPERATURE RANGE: 40 Degrees - 158 Degrees F

COLOR: Black

INNER WIDTH: 1/8 Inch

INNER DEPTH: 15/32 Inch

OUTER WIDTH: 23/64 Inch

OUTER DEPTH: 5/8 Inch

MUST BE EQUIVALENT TO McMASTER-CARR PART NUMBER (8507K16)

00011 AHW9751 450 EA 07/24/2026

FUSE-HOLDER-W/CAP,MINI-FUSE,30AMP,12GA

MATERIAL:

THIS IS A MINI-FUSE TYPE FUSE HOLDER WITH PROTECTIVE CAP

2011 SPECIFICATIONS:

In-Line Type

With Protective Cap

With Two 4 Inch Wire Leads

FOR WIRE SIZE: 12 Gauge

RATING: 30 AMP

MUST BE EQUIVALENT TO BARNES PART NUMBER (8698)

00012 AUT1923 1,072 FT 07/24/2026

HEAT-SHRINK,ADHESIVE-LINED,1/4"

ALL SPECIFICATIONS LISTED BELOW ARE MANDATORY!

SPECIFICATIONS:

THIS IS A 3:1 ADHESIVE LINED HEAT SHRINK TUBING DESIGNED

FOR USE IN WIRE IDENTIFICATION, WIRE BUNDLING, MECHANICAL

Page 8 of 53ORDER NUMBER:

PROTECTION, COLOR CODING, LIGHTWEIGHT HARNESSING,

PHYSICAL PROTECTION OF COMPONENTS, STRAIN RELIEF AND

SOLDER INSULATION.

1. Thin Dual Wall Design.

2. Outer Wall Made Of Polyolefin Heat Shrink.

3. Inner Wall Made Of A Hot Melt Adhesive.

4. Inner Layer Provides A Water-Tight Seal.

5. 3:1 Shrink Ratio.

6. NOMINAL SIZE: 0.250 Inch

7. COLOR: Black

8. OPERATING TEMPERATURE: -55 Degrees C To 100 Degrees C

9. SHRINK TEMPERATURE: 100 Degrees C

00013 AUT3751 13,440 IN 07/24/2026

HEAT-SHRINK,ADHESIVE-LINED,1/8"

ALL SPECIFICATIONS LISTED BELOW ARE MANDATORY!

SPECIFICATIONS:

THIS IS A 3:1 ADHESIVE LINED HEAT SHRINK TUBING DESIGNED

FOR USE IN WIRE IDENTIFICATION, WIRE BUNDLING, MECHANICAL

PROTECTION, COLOR CODING, LIGHTWEIGHT HARNESSING,

PHYSICAL PROTECTION OF COMPONENTS, STRAIN RELIEF AND

SOLDER INSULATION.

1. Thin Dual Wall Design.

2. Outer Wall Made Of Polyolefin Heat Shrink.

3. Inner Wall Made Of A Hot Melt Adhesive.

4. Inner Layer Provides A Water-Tight Seal.

5. 3:1 Shrink Ratio.

6. NOMINAL SIZE: 0.125 Inch

7. COLOR: Black

8. OPERATING TEMPERATURE: -55 Degrees C To 100 Degrees C

9. SHRINK TEMPERATURE: 100 Degrees C

00014 AUT3753 8,832 IN 07/24/2026

Page 9 of 53ORDER NUMBER:

HEAT-SHRINK,ADHESIVE-LINED,3/8"

ALL SPECIFICATIONS LISTED BELOW ARE MANDATORY!

SPECIFICATIONS:

THIS IS A 3:1 ADHESIVE LINED HEAT SHRINK TUBING DESIGNED

FOR USE IN WIRE IDENTIFICATION, WIRE BUNDLING, MECHANICAL

PROTECTION, COLOR CODING, LIGHTWEIGHT HARNESSING,

PHYSICAL PROTECTION OF COMPONENTS, STRAIN RELIEF AND

SOLDER INSULATION.

1. Thin Dual Wall Design.

2. Outer Wall Made Of Polyolefin Heat Shrink.

3. Inner Wall Made Of A Hot Melt Adhesive.

4. Inner Layer Provides A Water-Tight Seal.

5. 3:1 Shrink Ratio.

6. NOMINAL SIZE: 0.375 Inch

7. COLOR: Black

8. OPERATING TEMPERATURE: -55 Degrees C To 100 Degrees C

9. SHRINK TEMPERATURE: 100 Degrees C

00015 AUT3754 416 IN 07/24/2026

HEAT-SHRINK,ADHESIVE-LINED,1/2"

ALL SPECIFICATIONS LISTED BELOW ARE MANDATORY!

SPECIFICATIONS:

THIS IS A 3:1 ADHESIVE LINED HEAT SHRINK TUBING DESIGNED

FOR USE IN WIRE IDENTIFICATION, WIRE BUNDLING, MECHANICAL

PROTECTION, COLOR CODING, LIGHTWEIGHT HARNESSING,

PHYSICAL PROTECTION OF COMPONENTS, STRAIN RELIEF AND

SOLDER INSULATION.

1. Thin Dual Wall Design.

2. Outer Wall Made Of Polyolefin Heat Shrink.

3. Inner Wall Made Of A Hot Melt Adhesive.

4. Inner Layer Provides A Water-Tight Seal.

5. 3:1 Shrink Ratio.

Page 10 of 53ORDER NUMBER:

6. NOMINAL SIZE: 0.5 Inch

7. COLOR: Black

8. OPERATING TEMPERATURE: -55 Degrees C To 100 Degrees C

9. SHRINK TEMPERATURE: 100 Degrees C

00016 AUT4929 4 EA 07/24/2026

BK12849-15,SHIELD-CAP(60A-80A)(LC100M)

Shield Cap Precision Cut (LC100M)

PART#: BK12849-18

VENDOR MOST LIKELY USED: LINCOLN ELECTRIC #80302734

00017 BLT0196 1,500 EA 07/24/2026

CARRIAGE-BOLT,GRADE-5-STL,3/8-16,1-1/2"

MATERIAL:

THIS IS A MEDIUM CARBON STEEL GRADE 5 CARRIAGE BOLT

2011 SPECIFICATIONS:

Meets SAE J429 Grade 5 Specifications

Through-Hardened

120,000 psi Minimum Tensile Strength

THREAD STYLE: Threaded To Square

MATERIAL: Medium Carbon Steel

DIAMETER: 3/8

TPI: 16

LENGTH: 1-1/2 Inch

MUST BE EQUIVALENT TO BARNES PART NUMBER (-32164-11/2)

00018 BRD0051 3,728 FT 07/24/2026

TINNED,FLAT,COPPER,BRAID,1/2"

TINNED FLAT COPPER BRAID

SIZE: ½ INCH X 100FT ROLL

Page 11 of 53ORDER NUMBER:

NEWARK STOCK NUMBER (89K8038) MFG PART NUMBER (1233/2)

OR EQUIVALENT

00019 BUT0001 52 EA 07/24/2026

PUSH,BUTTON,SWITCH,12V,BLACK

DESCRIPTION:

THIS IS A DAIERTEK 12MM MOMENTARY PUSH BUTTON SWITCH

12V BLACK WATERPROOF PUSHBUTTON SWITCH 2 PIN PRE-WIRED

NORMALLY OPEN FOR AUTOMOTIVES.

MATERIALS:

FUNCTION: THIS 12V PUSHBUTTON SWITCH FOR MOMENTARY ON

OFF SPST FUNCTION. WHEN YOU PRESS THE BUTTON AND MAINTAIN,

THE MOMENTARY PUSH BUTTON SWITCH ON, RELEASE OFF.

RATING: THE RATING OF THIS SMALL MOMENTARY PUSH BUTTON

SWITCH IS 5A 12V DC; 3A 250V AC. HOLDING MORE THAN 50,000

CYCLES LONG ELECTRICAL LIFE.

PRE-WIRED: DUE TO THE DESIGN OF PRE-SOLDERED WIRES, THE

MOMENTARYPUSH BUTTON SWITCH 12V IS CONVENIENT FOR

INSTALLATION. THE MOUNTING HOLE SIZE IS 12MM (1/2").

Page 12 of 53ORDER NUMBER:

WATERPROOF: THIS 12V PUSHBUTTON SWITCH POSSESS IP65

WATERPROOF SO THAT IT WORKS WELL IN HUMID CONDITION

AND OUTDOORS. ITS BLACK SHELL WAS MADE OF HIGH QUALITY

METAL MATERIAL.

APPLICATION:THE MARINE PUSH BUTTON SWITCH HOLDS WIDE

RANGE OF APPLICATIONSUCH AS AUTOMOTIVE, CAR, BOAT,

SHIP, VEHICLE, INDUSTRIALEQUIPMENT, ETC.

***MUST INCLUDE ALL HARDWARE***

***MUST INCLUDE ALL INSTUCTIONS***

00020 CLP0034 100 EA 07/24/2026

MATERIAL:

THIS IS A WIRE AND TUBE CLIP WITH A NEOPRENE COVER

2011 SPECIFICATIONS:

Closed Type Furnished Open

Zinc Plated Finish

Neoprene Rubber Cushion

Meets MIL R-3065 And AMS-3209 Specifications

TUBE DIAMETER: 5/8 Inch

WIDTH: 1/2 Inch

MOUNTING BOLT SIZE: 1/4 Inch

THICKNESS: .032 Inch

INDUSTRY NUMBER: -10

MUST BE EQUIVALENT TO BARNES PART NUMBER (17752)

00021 CLP0054 60 EA 07/24/2026

WIRE<(>&<)>TUBE-CLAMP,NEOPRENE-CVR,1",1/2"

MATERIAL:

THIS IS A WIRE AND TUBE CLIP WITH A NEOPRENE COVER

Page 13 of 53ORDER NUMBER:

Closed Type Furnished Open

Zinc Plated Finish

Neoprene Rubber Cushion

Meets MIL R-3065 And AMS-3209 Specifications

TUBE DIAMETER: 1 Inch

WIDTH: 1/2 Inch

MOUNTING BOLT SIZE: 1/4 Inch

THICKNESS: .032 Inch

INDUSTRY NUMBER: -16

MUST BE EQUIVALENT TO BARNES PART NUMBER (17756)

00022 CMP0031 500 EA 07/24/2026

WIRE<(>&<)>TUBE-CLAMP,NEOPRENE-CVR,3/8",1/2"

MATERIAL:

THIS IS A WIRE AND TUBE CLIP WITH A NEOPRENE COVER

2011 SPECIFICATIONS:

Closed Type Furnished Open

Zinc Plated Finish

Neoprene Rubber Cushion

Meets MIL R-3065 And AMS-3209 Specifications

TUBE DIAMETER: 3/8 Inch

WIDTH: 1/2 Inch

MOUNTING BOLT SIZE: 1/4 Inch

THICKNESS: .032 Inch

INDUSTRY NUMBER: -6

MUST BE EQUIVALENT TO BARNES PART NUMBER (17748)

00023 CMP0047 150 EA 07/24/2026

WIRE<(>&<)>TUBE-CLAMP,NEOPRENE-CVR,1/4",1/2"

MATERIAL:

THIS IS A WIRE AND TUBE CLIP WITH A NEOPRENE COVER

Closed Type Furnished Open

Page 14 of 53ORDER NUMBER:

Zinc Plated Finish

Neoprene Rubber Cushion

Meets MIL R-3065 And AMS-3209 Specifications

TUBE DIAMETER: 1/4 Inch

WIDTH: 1/2 Inch

MOUNTING BOLT SIZE: 1/4 Inch

THICKNESS: .032 Inch

INDUSTRY NUMBER: -4

MUST BE EQUIVALENT TO BARNES PART NUMBER (17746)

00024 CMP0051 154 EA 07/24/2026

KP67174,HEAVY,DUTY,CLAMP-1/4",HOLE-1"

HEAVY DUTY CLAMP

SIZE:CLAMP-1/4",HOLE-1" (1 PER PACK)

BARNES PRODUCTS PART NUMBER

00025 CTR0053 130 EA 07/24/2026

6-CAVITY-MALE-CONNECTOR,16-18-GAUGE

MATERIAL:

THIS IS A METRI PACK 150 SERIES SEALED ELECTRICAL CONNECTOR

SPECIFICATIONS:

MALE CONNECTOR

ACCEPT 16-18 GA. WIRE

NUMBER OF CAVITIES:6

COLOR: BLACK

00026 CTR0071 50 EA 07/24/2026

PUSH-ON-TERMINAL,FEMALE,3PC,16-14ga

MATERIAL:

THIS IS A FULLY NYLON-INSULATED, THREE-PIECE FEMALE QUICK

DISCONNECT WITH INSULATION GRIP SLEEVE AND TWO HUMP

Fully Insulated Grip Sleeve

Page 15 of 53ORDER NUMBER:

Nylon Insulation

Two Hump

CONNECTION: Female

WIRE SIZE: 16-14 Gauge

INSULATION COLOR: Blue

STUD SIZE: .250

MUST BE EQUIVALENT TO BARNES PART NUMBER (C85867)

00027 CTR0128 300 EA 07/24/2026

MATERIAL:

THIS IS A NYLON-INSULATED GRIP, FEMALE, PUSH-ON

QUICK DISCONNECT

2011 SPECIFICATIONS:

Nylon Insulated Grip

Funnel Entry

Mates With Male Push-Ons Or Male Tabs

WIRE SIZE: 16-14 Gauge

INSULATION COLOR: Blue

TAB SIZE: .187

TAB THICKNESS: .020

MUST BE EQUIVALENT TO BARNES PART NUMBER (23091)

00028 CTR0851 300 EA 07/24/2026

FUSE-TAPPER-3/16-MALE-TAB-FOR-MINI-FUSE

SPECIFICATIONS:

THIS BRACKET IS A BRASS FUSE TAPPER PUSH ON. 3/16'' WILL BE

THE TAB SIZE FOR THE CONNECTING POINT FOR THE FEMALE

SPADE TERMINAL.

Page 16 of 53ORDER NUMBER:

BSBM LAST DATA TEXT REVISION 11-26-13

00029 CTR232544 2,870 EA 07/24/2026

TPA-SECONDARY-LOCK,3-CAVITY-CONNECTOR

"TPA SECONDARY LOCK FITS METRI PACK 150 SERIES

NUMBER OF CAVITIES:3

THREE CAVITY CONNECTOR SECONDARY LOCK

TERMINAL SUPPLY COMPANY PART NUMBER (12052845) OR EQUIVALENT

Page 17 of 53ORDER NUMBER:

00030 CTR232545 1,340 EA 07/24/2026

TPA-SECONDARY-LOCK,2-CAVITY-CONNECTOR

"TPA SECONDARY LOCK FITS METRI PACK 150 SERIES

NUMBER OF CAVITIES:2

TWO CAVITY CONNECTOR SECONDARY LOCK

TERMINAL SUPPLY COMPANY PART NUMBER (12052634) OR EQUIVALENT

Page 18 of 53ORDER NUMBER:

00031 CTR232547 460 EA 07/24/2026

2-CAVITY-FEMALE-CONNECTOR,16-18-GAUGE

"METRI PACK 150 SERIES SEALED

FEMALE CONNECTORS ACCEPT 16-18 GA. WIRE

NUMBER OF CAVITIES:2

COLOR:BLACK WITH GRAY WEATHER SEAL

REQUIRES ONE SECONDARY LOCK <(>&<)> TWO WIRE SEALS

TERMINAL SUPPLY COMPANY PART NUMBER (12052641) OR EQUIVALENT

00032 CTR232548 830 EA 07/24/2026

Page 19 of 53ORDER NUMBER:

2-CAVITY-MALE-CONNECTOR,16-18-GAUGE

"METRI PACK 150 SERIES SEALED

MALE CONNECTORS ACCEPT 16-18 GA. WIRE

NUMBER OF CAVITIES:2

COLOR:BLACK WITH GRAY WEATHER SEAL

REQUIRES ONE SECONDARY LOCK <(>&<)> TWO WIRE SEALS

TERMINAL SUPPLY COMPANY PART NUMBER (12162000) OR EQUIVALENT

Page 20 of 53ORDER NUMBER:

00033 CTR232549 1,370 EA 07/24/2026

"METRI PACK 150 SERIES SEALED

FEMALE CONNECTORS ACCEPT 16-18 GA. WIRE

NUMBER OF CAVITIES:3

COLOR:BLACK WITH VIOLET WEATHER SEAL

REQUIRES ONE SECONDARY LOCK <(>&<)> THREE WIRE SEALS

TERMINAL SUPPLY COMPANY PART NUMBER (12110293) OR EQUIVALENT

00034 CTR232550 1,400 EA 07/24/2026

3-CAVITY-MALE-CONNECTOR,16-18-GAUGE

"METRI PACK 150 SERIES SEALED

MALE CONNECTORS ACCEPT 16-18 GA. WIRE

NUMBER OF CAVITIES:3

COLOR:BLACK WITH VIOLET WEATHER SEAL

REQUIRES ONE SECONDARY LOCK <(>&<)> THREE WIRE SEALS

TERMINAL SUPPLY COMPANY PART NUMBER (12129615) OR EQUIVALENT

Page 21 of 53ORDER NUMBER:

Page 22 of 53ORDER NUMBER:

00035 CTR232595 120 EA 07/24/2026

TPA-SECONDARY-LOCK,6-CAVITY-CONNECTOR

TPA SECONDARY LOCK FITS METRI PACK 150 SERIES

NUMBER OF CAVITIES:6

SIX CAVITY CONNECTOR SECONDARY LOCK

TERMINAL SUPPLY COMPANY PART NUMBER (12052850) OR EQUIVALENT

Page 23 of 53ORDER NUMBER:

00036 FSE0047 1,225 EA 07/24/2026

MINI-FUSE,3-AMP,VIOLET

ALL SPECIFICATIONS LISTED BELOW ARE MANDATORY!

SPECIFICATIONS:

THIS IS A MINI STYLE INDUSTRY STANDARD FUSE DESIGNED FOR

LOW-VOLTAGE AUTOMOTIVE AND OTHER ELECTRONIC

APPLICATIONS.

1. Mini Style Design.

Page 24 of 53ORDER NUMBER:

2. Plastic Housing.

3. Color Coded Amperage Rating.

4. Built To Exacting OEM Specifications.

5. UL Listed.

6. Fast acting.

7. Parallel Tabs.

8. RATING: 3 AMP

9. COLOR CODE: Violet

10. VOLTAGE RATING: 32V AC/DC

11. TAB SIZE: 3/32 Inch

BSBM LAST DATA TEXT REVISION 11-15-12

00037 FSE0049 540 EA 07/24/2026

MINI-FUSE,5-AMP,TAN

ALL SPECIFICATIONS LISTED BELOW ARE MANDATORY!

SPECIFICATIONS:

THIS IS A MINI STYLE INDUSTRY STANDARD FUSE DESIGNED FOR

LOW-VOLTAGE AUTOMOTIVE AND OTHER ELECTRONIC

APPLICATIONS.

1. Mini Style Design.

2. Plastic Housing.

3. Color Coded Amperage Rating.

4. Built To Exacting OEM Specifications.

5. UL Listed.

6. Fast acting.

7. Parallel Tabs.

8. RATING: 5 AMP

9. COLOR CODE: Tan

10. VOLTAGE RATING: 32V AC/DC

11. TAB SIZE: 3/32 Inch

Page 25 of 53ORDER NUMBER:

BSBM LAST DATA TEXT REVISION 11-15-12

00038 FSE0050 1,780 EA 07/24/2026

MINI-FUSE,10-AMP,RED

ALL SPECIFICATIONS LISTED BELOW ARE MANDATORY!

SPECIFICATIONS:

THIS IS A MINI STYLE INDUSTRY STANDARD FUSE DESIGNED FOR

LOW-VOLTAGE AUTOMOTIVE AND OTHER ELECTRONIC

APPLICATIONS.

1. Mini Style Design.

2. Plastic Housing.

3. Color Coded Amperage Rating.

4. Built To Exacting OEM Specifications.

5. UL Listed.

6. Fast acting.

7. Parallel Tabs.

8. RATING: 10 AMP

9. COLOR CODE: Red

10. VOLTAGE RATING: 32V AC/DC

11. TAB SIZE: 3/32 Inch

BSBM LAST DATA TEXT REVISION 11-15-12

00039 FSE0052 1,455 EA 07/24/2026

MINI-FUSE,30-AMP,GREEN

ALL SPECIFICATIONS LISTED BELOW ARE MANDATORY!

SPECIFICATIONS:

THIS IS A MINI STYLE INDUSTRY STANDARD FUSE DESIGNED FOR

LOW-VOLTAGE AUTOMOTIVE AND OTHER ELECTRONIC

Page 26 of 53ORDER NUMBER:

APPLICATIONS.

1. Mini Style Design.

2. Plastic Housing.

3. Color Coded Amperage Rating.

4. Built To Exacting OEM Specifications.

5. UL Listed.

6. Fast acting.

7. Parallel Tabs.

8. RATING: 30 AMP

9. COLOR CODE: Green

10. VOLTAGE RATING: 32V AC/DC

11. TAB SIZE: 3/32 Inch

BSBM LAST DATA TEXT REVISION 11-15-12

00040 FSE0054 375 EA 07/24/2026

MINI-FUSE,20-AMP,YELLOW

ALL SPECIFICATIONS LISTED BELOW ARE MANDATORY!

SPECIFICATIONS:

THIS IS A MINI STYLE INDUSTRY STANDARD FUSE DESIGNED FOR

LOW-VOLTAGE AUTOMOTIVE AND OTHER ELECTRONIC

APPLICATIONS.

1. Mini Style Design.

2. Plastic Housing.

3. Color Coded Amperage Rating.

4. Built To Exacting OEM Specifications.

5. UL Listed.

6. Fast acting.

7. Parallel Tabs.

8. RATING: 20 AMP

9. COLOR CODE: Yellow

10. VOLTAGE RATING: 32V AC/DC

Page 27 of 53ORDER NUMBER:

11. TAB SIZE: 3/32 Inch

BSBM LAST DATA TEXT REVISION 11-15-12

00041 FSE0147 10 EA 07/24/2026

ATM,JCASE,BLADE,AUTO-FUSE,ATM-50-AMP

ALL SPECIFICATIONS LISTED BELOW ARE MANDATORY!

SPECIFICATIONS:

THIS IS A JCASE STYLE HIGH AMP INDUSTRY STANDARD FUSE

DESIGNED FOR LOW-VOLTAGE AUTOMOTIVE AND OTHER

ELECTRONIC APPLICATIONS.

1. JCASE Style Design.

2. High Amperage Capability.

3. Provides Increased Time Delay.

4. Provides Low Voltage Drop.

5. UL Listed.

6. Color Coded Amperage Rating.

7. ANSI Standard OCR-A Font For Visual Inspection Systems.

8. Double Spring-Beam Box Terminal.

9. Secondary Locking Feature To Hold Terminal Firmly In Place.

10. RATING: 50 AMP

11. COLOR CODE: RED

12. VOLTAGE RATING: 32V AC/DC

00042 GLO0035 160 EA 07/24/2026

NITRILE,GLOVES,5MIL

MATERIAL:

THIS IS A BOX OF 100 DERMA-LITE POWDER FREE

NITRILE EXAM GLOVES

SPECIFICATIONS:

QTY: 100 PER BOX

Page 28 of 53ORDER NUMBER:

THICKNESS: 5mil

POWDER FREE EXAM GRADE NITRILE

EXTRAORDINARY STRENGTH AND PUNCTURE RESISTANT

GREAT IN WET DRY CONDITIONS

TEXTURED GRIP PROVIDES ENHANCED GRIPPING POWER

LATEX FREE

MUST BE EQUIVALENT TO TASCO PART (SAS 6608)

00043 GRM0020 600 EA 07/24/2026

HEAVY,DUTY,RUBBER,GROMMET

MATERIAL:

THIS IS A BLACK RUBBER GROMMET FOR VEHICLE FIRE EXTINGUISHER

BRACKET

SPECIFICATIONS:

FOR USE WITH FIRE EXTINGUISHER BRACKET

00044 GRM0021 356 EA 07/24/2026

SBR-RUBBER-GROMMET-2"-x-1/4"-GROOVE

DESCRIPTION:

SBR RUBBER GROMMET FOR 2" HOLE DIAMETER AND

1/4" MATERIAL THICKNESS

SBR RUBBER GROMMET SPECIFICATIONS:

FOR HOLE DIA.: 2"

FOR THICKNESS MATERIAL: 1/4"

ID: 1 3/4"

FLANGE DIA.: 2 1/2"

OVERALL HT: 1/2"

HARDNESS RATING: MEDIUM

HARDNESS: DUROMETER 55A

TEMP. RANGE: -30 TO 170 DEGREES

FOR USE OUTDOORS: NO

Page 29 of 53ORDER NUMBER:

COLOR: BLACK

PKG. QTY: (5) FIVE

MCMASTER-CARR PART NUMBER (9600K125) OR COMPARABLE

00045 GRM0028 500 EA 07/24/2026

RUBBER-GROMMET,1/4"-I.D.,1/2"-GROOVE

MATERIAL:

THIS IS A RUBBER GROMMET FOR WIRE TUBING EXTENDING

THROUGH PANELS

2011 SPECIFICATIONS:

Made Of Rubber

Black

HOLE INNER DIAMETER: 1/4 Inch

GROOVE WIDTH: 1/8 Inch

GROOVE DIAMETER: 5/8 Inch

00046 GRM0032 200 EA 07/24/2026

RUBBER-GROMMET,5/16"-I.D.,9/16"-GROOVE

MATERIAL:

THIS IS A RUBBER GROMMET FOR WIRE TUBING EXTENDING

THROUGH PANELS

2011 SPECIFICATIONS:

Made Of Rubber

Black

HOLE INNER DIAMETER: 5/16 Inch

GROOVE WIDTH: 1/8 Inch

GROOVE DIAMETER: 9/16 Inch

MUST BE EQUIVALENT TO BARNES PART NUMBER (C87688)

00047 GRM0244 100 EA 07/24/2026

116840,GROMMET,3/4X1-3/8"X1/8",GROOVE

GROMMET

Page 30 of 53ORDER NUMBER:

SIZE:3/4"ID.X1-3/8"OD.X1/8"THICK WALL GROOVE(25PER PACK)

MCMASTER-CARR PART NUMBER 116840 OR COMPARABLE

00048 HLD0019 500 EA 07/24/2026

FLOOR-MAT-HOLD-DOWN-HOOK

ALL SPECIFICATIONS LISTED BELOW ARE MANDATORY! FORD PART#W715120SSA

SPECIFICATIONS:

THIS IS A HOOK USED TO HELP SECURE A FLOOR MAT AND

PREVENT IT FROM SHIFTING AROUND.

1. Designed To Secure A Floor Mat.

2. Hooks Into the Floor Mat Through The Floor Mat Grommet

And Snaps Into The Base Piece.

3. Installs Through The Vehicle's Carpet.

4. Made Of Hard Plastic

5. COLOR: Black

00049 HNG0279 20 EA 07/24/2026

HINGE,NON-REM-PIN,STL,3"WX.120"TX3"H

SPECIFICATIONS:

THIS IS A SURFACE-MOUNT HINGE WITHOUT HOLES

MATERIAL:

Made Of Unfinished Steel

Reversible For Right-And-Left Hand Mounting

Nonremovable Pin

Designed For Surface Mount Applications

Does Not Have Mounting Holes

Leaves Lay Flat

LEAF THICKNESS: 0.120 Inches

OPEN WIDTH: 3 Inches

PIN DIAMETER: 0.25 Inches

LEAF HEIGHT: 3 Inches

MINIMUM RANGE OF MOTION: 265 Deg (from the folded position)

Page 31 of 53ORDER NUMBER:

LAST BSBM DATA TEXT REVISION 8-6-12

00050 HWS0205 3 EA 07/24/2026

FLEXCUT-ELECTRODE

MATERIAL:

ELECTRODE FOR USE W/LC100M PLASMA TORCHES

MUST BE EQUIVALENT TO LINCOLON ELECTRIC PART NUMBER (BK12849-3)

00051 HWS6001 51 EA 07/24/2026

MULTIPURPOSE-FIRE-EXTINGUISHER

MATERIAL:

THIS IS A MULTIPURPOSE DRY CHEMICAL FIRE EXTINGUISHER

SPECIFICATIONS:

DRY CHEMICAL

ALUMINUM VALVE

COLOR: RED

HEIGHT: 16.0 INCHES

DIAMETER: 4.5 INCHES

CYLINDER MATERIAL: ALUMINUM

SIZE: 5 POUNDS

DISCHARGE TIME: 13-15 SECONDS

OPERATING PRESSURE: 195 PSI

MAXIMUM RANGE: 12 FEET

UL RATING: 3A, 40B, C

Page 32 of 53ORDER NUMBER:

BSBM LAST DATA TEXT REVISION 4-24-12

00052 HWS6002 450 EA 07/24/2026

FIRE-STICK-FIRE-EXTINGUISHER

MATERIAL:

THIS IS A MULTIPURPOSE DRY CHEMICAL FIRE EXTINGUISHER.

INCLUDES:

ONE (1) FIRE STICK EXTUINGUISHER WITH HIGH VISIBILTY

STRIKER AND CAP.

ONE (1) MOUNTING CLIP

SPECIFICATIONS:

100 SECOND DISCHARGE:

ALMOST 10x LONGER THAN A 5lb FIRE EXTINGUISHER BOTTLE

COMPACT <(>&<)> EASY TO USE:

33cm (13") TALL, 3.2cm (1.2") BODY DIAMETER / 4cm (1.6") HANDLE

DIAMETER,

360grams (0.79lbs) WEIGHT

MAKES NO MESS / LEAVES NO RESIDUE <(>&<)> ECO-FRIENDLY:

NO MESS, NON-TOXIC, NON-CORROSIVE, ENVIRONMENTALLY FRIENDLY

ZERO PRESSURE DISCHARGE:

WILL NOT SPREAD OIL <(>&<)> LIQUID FIRES

SAFE <(>&<)> MAINTENACE FREE:

NO MOVING PARTS OR COMPRESSOR LEVER

WEATHERPRROF AND UNAFFECTED FROM TEMPERATURE, HUMIDITY, OR

VIBRATION. SAFE TO STORE IN WET OR HOT ENVIRONMENTS.

FIGHTS ALL MAJOR FIRE CLASSES INCLUDING OIL AND GREASE

Page 33 of 53ORDER NUMBER:

***MUST BE EQUIVALENT TO THE ELEMNET E100 FIRE EXINGUISHER***

00053 LOX0235 10 EA 07/24/2026

PADLOCK-HASPS,STEEL,3-3/8"X1-1/2"

MATERIAL:

THIS IS PADLOCK HASPS WITH FIXED PADLOCK EYE USED ON

THE DAYBOXES, ETC.

2011 SPECIFICATIONS:

Zinc Plated Steel Hasps With Fixed Padlock Eye

LENGTH: 6"

WIDTH: 2-3/8X7/16"

(MARCH 2021)

00054 PMK0002 56 FT 07/24/2026

GREEN-MASKING-PAPER-36"

MATERIAL:

GREEN MASKING PAPER

36" NOMINAL Wide, 625ft NOMINAL Length, 40lb PAPER Weight

MUST BE EQUIVALENT TO TASCO PART NUMBER (CCP36G)

00055 RIV0313 400 EA 07/24/2026

SSTL/SSTL-RIVET,DOME-HEAD,3/16,1/8-1/4

MATERIAL:

THIS IS A OPEN-END BLIND RIVET WITH A DOME HEAD

2011 SPECIFICATIONS:

HEAD STYLE: Dome

RIVET MATERIAL: Stainless Steel

MANDREL MATERIAL: Stainless Steel

RIVET DIAMETER: 3/16 Inch

GRIP RANGE: 1/8 - 1/4 Inch

Page 34 of 53ORDER NUMBER:

MUST BE EQUIVALENT TO BARNES PART NUMBER (34131)

00056 RNG0405 125 EA 07/24/2026

RING-TERMINAL,NON-INSLTD,6,1/4"

MATERIAL:

THIS IS A NON-INSULATED RING TERMINAL

2011 SPECIFICATIONS:

Elecro Tin Plated

Terminal Barrel Is Rolled With Brazed Seam Chamfered To Form

Funnel Entry

Indentations Or Dimples To Provide The Interior Of The BArrel

With Extra Gripping Power

MATERIAL: ETP Copper

WIRE SIZE: 6 Guage

STUD SIZE: 1/4 Inch

MUST BE EQUIVALENT TO BARNES PART NUMBER (23293)

00057 RNG0680 1,200 EA 07/24/2026

RING-TERMINAL,NYLON-INSL,16-14GA,1/4

MATERIAL:

THIS IS A NYLON INSULATED RING TERMINAL

2011 SPECIFICATIONS:

Funnel Entry

Insulation Grip

WIRE SIZE: 16-14 Guage

STUD SIZE: 1/4

INSULATION COLOR: Blue

MUST BE EQUIVALENT TO BARNES PART NUMBER (23024)

00058 SCR0413 200 EA 07/24/2026

PAN-HEAD-SCREW,SSTL,PHILLIPS,1/4-20,3/4"

ALL SPECIFICATIONS LISTED BELOW ARE MANDATORY!

Page 35 of 53ORDER NUMBER:

THIS IS A PAN HEAD MACHINE SCREW. PAN HEAD

MACHINE SCREWS ARE GENERAL PURPOSE SCREWS

TYPICALLY USED IN NONCRITICAL APPLICATIONS. THESE

SCREWS ARE MOST COMMONLY USED TO FASTEN METAL

TO METAL. THEY ARE DESIGNED TO BE INSERTED INTO

A PRETHREADED HOLE OR MATED WITH A NUT . PAN HEAD

SCREWS HAVE A SLIGHTLY ROUNDED TOP. THE PAN HEAD

PROVIDES A DECORATIVE APPEARANCE, MODERATE

HEAD HEIGHT AND HEAD DIAMETER WITH A FLAT BEARING

SURFACE.

1. TYPE: Pan Head Machine Screw

2. MATERIAL: 18-8 Stainless Steel

3. RESISTANCE: Excellent Corrosion Resistance

4. COATING: None Coated

5. STANDARD OR METRIC: Standard

6. DRIVE TYPE: Phillips

7. DRIVE SIZE: #3

8. HEAD TYPE: Pan Head

9. HEAD DIAMETER: 0.492 Inch

10. HEAD HEIGHT: 0.175 Inch

11. SURFACE UNDER HEAD: Flat Bearing Surface

12. THREAD DIAMETER: 1/4 Inch

13. THREAD PER INCH (TPI): 20

14. THREAD LENGTH TYPE: Fully Threaded

15. MINIMUM THREAD LENGTH: Threaded To Head

16. THREAD DIRECTION: Right-Hand Threads

17. THREAD TYPE: UNC Course Thread

18. THREAD FIT: Class 2A

19. SCREW LENGTH: 3/4 Inch

20. SCREW LENGTH MEASURED: From Under The Head

21. TIP TYPE: Blunt Tip

22. MINIMUM TENSILE STRENGTH: 72,000 psi

23. MINIMUM ROCKWELL HARDNESS: B80

24. MINIMUM REQUIRED STANDARD: ASME B18.6.3

25. MINIMUM COMPLIANCE: RoHS Compliant

Page 36 of 53ORDER NUMBER:

BSBM LAST DATA TEXT REVISION 6-19-13

00059 SCR0556 300 EA 07/24/2026

SELF-TAP-SCREW,HEX-WSHR-HD,SSTL,1/4,1"

MATERIAL:

THIS IS A SELF DRILLING/TAPPING SCREW WITH A INDENTED HEX

WASHER HEAD

2011 SPECIFICATIONS:

HEAD STYLE: Indented Hex Washer

POINT: #3

MATERIAL: Stainless Steel

DIAMETER: 1/4

LENGTH: 1 Inch

MUST BE EQUIVALENT TO BARNES PART NUMBER (95595)

00060 SCR1708 20 EA 07/24/2026

THUMB-SCREW,PLSTC-KNURL-HD,5/8",1/4-20

ALL SPECIFICATIONS LISTED BELOW ARE MANDATORY!

SPECIFICATIONS:

THIS IS A KNURLED HEAD THUMB KNOB SCREW WITH A HIGH

SHOULDER THAT LIFTS THE HEAD OFF THE WORK SURFACE

MAKING THE SCREW EASIER TO GRASPS. DESIGNED FOR

APPLICATIONS WHEN "FINGER-TIGHT" IS SUFFICIENT OR IF

FREQUENT ADJUSTMENTS ARE NECESSARY.

1. HEAD MATERIAL TYPE: Plastic

2. HEAD FINISH: Black Acetal Plastic

3. HEAD TYPE: Knurled

4. HEAD STYLE: Round With Shoulder

Page 37 of 53ORDER NUMBER:

5. HEAD DIAMETER (DIA.): 3/4 Inch

6. HEAD HEIGHT (HT.): 3/16 Inch

7. SHOULDER TYPE: Style A

8. SHOULDER LENGTH: 1/8 Inch

9. SHOULDER DIAMETER: 1/2 Inch

10. THREAD MATERIAL TYPE: Stainless Steel

11. THREAD FINISH: 18-8 Stainless Steel

12. THREAD TYPE: Fully Threaded To Shoulder

13. THREAD FIT: Class 3A

14. THREAD DIAMETER: 1/4 Inch

15. THREAD TPI: 20

16. THREAD LENGTH (LG.): 5/8 Inch

17. TIP TYPE: Flat Point

18. TEMPERATURE RANGE: 32 Degrees To 180 Degrees F

BSBM LAST DATA TEXT REVISION 10-29-12

00061 SCR2534 1,000 EA 07/24/2026

PAN-HEAD-SCREW,SSTL,PHILLIPS,6-32,1"

ALL SPECIFICATIONS LISTED BELOW ARE MANDATORY!

SPECIFICATIONS:

THIS IS A PAN HEAD MACHINE SCREW. PAN HEAD

MACHINE SCREWS ARE GENERAL PURPOSE SCREWS

TYPICALLY USED IN NONCRITICAL APPLICATIONS. THESE

SCREWS ARE MOST COMMONLY USED TO FASTEN METAL

TO METAL. THEY ARE DESIGNED TO BE INSERTED INTO

A PRETHREADED HOLE OR MATED WITH A NUT . PAN HEAD

SCREWS HAVE A SLIGHTLY ROUNDED TOP. THE PAN HEAD

PROVIDES A DECORATIVE APPEARANCE, MODERATE

HEAD HEIGHT AND HEAD DIAMETER WITH A FLAT BEARING

SURFACE.

1. TYPE: Pan Head Machine Screw

2. MATERIAL: 18-8 Stainless Steel

3. RESISTANCE: Excellent Corrosion Resistance

4. COATING: None Coated

Page 38 of 53ORDER NUMBER:

5. STANDARD OR METRIC: Standard

6. DRIVE TYPE: Phillips

7. DRIVE SIZE: #2

8. HEAD TYPE: Pan Head

9. HEAD DIAMETER: 0.270 Inch

10. HEAD HEIGHT: 0.097 Inch

11. SURFACE UNDER HEAD: Flat Bearing Surface

12. THREAD DIAMETER: #6

13. THREAD PER INCH (TPI): 32

14. THREAD LENGTH TYPE: Fully Threaded

15. MINIMUM THREAD LENGTH: Threaded To Head

16. THREAD DIRECTION: Right-Hand Threads

17. THREAD TYPE: UNC Course Thread

18. THREAD FIT: Class 2A

19. SCREW LENGTH: 1 Inch

20. SCREW LENGTH MEASURED: From Under The Head

21. TIP TYPE: Blunt Tip

22. MINIMUM TENSILE STRENGTH: 72,000 psi

23. MINIMUM ROCKWELL HARDNESS: B80

24. MINIMUM REQUIRED STANDARD: ASME B18.6.3

25. MINIMUM COMPLIANCE: RoHS Compliant

BSBM LAST DATA TEXT REVISION 6-19-13

00062 SCR2758 20 EA 07/24/2026

THUMB-SCREW,SSTL,SPADE-HD,2",1/4-20

ALL SPECIFICATIONS LISTED BELOW ARE MANDATORY!

SPECIFICATIONS:

THIS IS A SPADE-HEAD THUMB SCREW IDEAL FOR MAKING

FREQUENT ADJUSTMENTS. THE WIDE HEAD MAKES THIS SCREW

EASY TO TURN BY HAND WITH NO TOOLS REQUIRED.

1. Made Of 18-8 Stainless Steel.

Page 39 of 53ORDER NUMBER:

2. Corrosion Resistant.

3. HEAD STYLE: Spade With/Out Shoulder

4. HEAD WIDTH (WD.): 23/32 Inch

5. HEAD HEIGHT (HT.): 1/2 Inch

6. THREAD DIAMETER (DIA): 1/4 Inch

7. THREAD PER INCH (TPI): 20

8. THREAD LENGTH (LG.): 2 Inch

9. THREAD TYPE: Fully Threaded

10. THREAD FIT: Class 2A

11. TENSILE STRENGTH: 80,000 psi

12. MINIMUM ROCKWELL HARDNESS: B85

BSBM LAST DATA TEXT REVISION 02-4-13

00063 SDR0027 66 EA 07/24/2026

SOLDER,0.062"-DIA,1-LB

MATERIAL:

SOLDER, 0.062" DIA, 1 Lb

MUST BE EQUIVALENT TO PART NUMBER: (1UYH3)

00064 STR0038 766 EA 07/24/2026

RUBBER,STRAP,FIRE,EXTINGUISHER

MATERIAL:

THIS IS A BLACK RUBBER STRAP FOR FIRE EXTINGUISHER

BRACKET

SPECIFICATIONS:

FOR USE WITH FIRE EXINGUISHER BRACKET

MUST BE EQUIVALENT TO AMEREX PART (07166)

00065 TAG0001 1,900 EA 07/24/2026

Page 40 of 53ORDER NUMBER:

KEY-TAG-SPLIT-RING-1-1/4"-DIA

DESCRIPTION:

ROUND TAG WITH METAL RIM AND METAL KEY RING,

1 1/4" DIA, WHITE, 50/PACK

MUST BE EQUIVALENT TO NULEAF PART NUMBER (AVE11025)

00066 TAG0070 300 EA 07/24/2026

KEY-TAG,BRASS,ROUND,1-1/2"dia.

MATERIAL:

THIS IS A BRASS KEY TAG

2011 SPECIFICATIONS:

Brass

Round

TAG DIAMETER: 1-1/2 Inch

HOLE DIAMETER: 3/16 Inch

MUST BE EQUIVALENT TO BARNES PART NUMBER (C20683)

00067 TML0266 434 EA 07/24/2026

RING-TERMINAL,NON-INSLTD,5/16",8ga

MATERIAL:

THIS IS A NON-INSULATED RING TERMINAL

2011 SPECIFICATIONS:

Copper Construction

Tin Plated

Anti-Rotational Tongue

Selectively Annealed Barrel

Serrated Inner Barrel

Hardened Tongue

Page 41 of 53ORDER NUMBER:

Long Barrel With Brazed Seam

WIRE SIZE: 8 Gauge

STUD SIZE: 5/16 Inch

MUST BE EQUIVALENT TO BARNES PART NUMBER (78131)

00068 TML0820 6,250 EA 07/24/2026

C,12045773,TERMINALS (MALE)

P/N:12045773 NSN:N/A

CHARACTERISTICS:

PACKARD TERMINALS <(>&<)> CONNECTORS

18-16 WIRE RANGE

METRI-PACK 150 SERIES SEALED

MALE TERMINALS

MUST BE EQUIVALENT TO MSC PART# 62817721

00069 TML1089 5,450 EA 07/24/2026

12048074,SEALED-FEMALE-TERMINAL,18-16GA

CHARACTERISTICS:

SEALED CONNECTOR

FEMALE TERMINAL,18-16GA

MUST BE EQUIVALENT TO P/N: 12048074

VCVH LAST DATA TEXT REVISION 1-26-16

00070 TML1219 767 EA 07/24/2026

RING-TERMINAL,NYLON-INSL,16-14GA,5/16

MATERIAL:

THIS IS A NYLON INSULATED RING TERMINAL

2011 SPECIFICATIONS:

Funnel Entry

Insulation Grip

WIRE SIZE: 16-14 Gauge

Page 42 of 53ORDER NUMBER:

STUD SIZE:5/16-3/8

INSULATION COLORl: Blue

MUST BE EQUIVALENT TO BARNES PART NUMBER (23026)

00071 TPE0522 600 EA 07/24/2026

TAPE,ELECTRICAL,PLUS,33,SUPER,SCOTCH,3M

MATERIAL: 3M BRAND SCOTCH SUPER 33 PLUS

ELECTRICAL TAPE SPECIFICATIONS: HAS A THICKNESS OF 7 MIL;MEETS

REQUIREMENTS OF ASTM-D 3005 TYPE 1,UL 510,HH1599C,AND CSA 22.2;IT

RESISTS UV RAYS AND CORROSION;IT IS PRIMARILY INSULATION FOR CABLE

WIRING; WORKS IN TEMPERATURE RANGE OF 0 DEGREES FAHRENHEIGHT TO 220

DEGREES FAHRENHEIGHT;IT IS FLAME RETARDANT AND MOISTURE RESISTANT;COLOR

IS BLACK

DIMENSIONS: 3/4"WIDTH; 66 FT. LONG ROLL

MUST BE EQUIVALENT TO GRAINGER PART # 2A225

00072 WIR0194 1,000 FT 07/24/2026

WIRE,19-STRAND,PURPLE,16ga

MATERIAL:

THIS IS A PLASTIC INSULATED SINGLE CONDUCTOR PRIMARY WIRE,

1000FT ROLL

SPECIFICATIONS:

PVC Insulation

Stranded Copper Conductor

Resistant To Heat, Moisture, Oil and Weather

Meets SAE J-1128 Type GPT Specifications

50 Volts Maximum

COLOR: Purple

WIRE GAUGE: No. 16 Gauge

STRAND GAUGE: 29 Gauge

NUMBER OF STRANDS: 19

NOMINAL OVERALL DIAMETER: .105

Page 43 of 53ORDER NUMBER:

MUST BE EQUIVALENT TO BARNES PART NUMBER (KP74920)

00073 WIR0239 10,600 EA 07/24/2026

CABLE-TIES,NYLON,BLACK,5.6"L,.130"W

MATERIAL:

THIS IS A HEAVY DUTY BLACK CABLE TIE

2011 SPECIFICATIONS:

Natural Nylon 6/6

RU-UL Recognized

QPL Listed

COLOR: Black

BUNDLE DIAMETER RANGE: 1/16-1 1/4 Inch

LENGTH: 5.6 Inch

WIDTH: .130 Inch

MIN. LOOP TENSILE STRENGTH: 30 Pounds

TEMPERATURE RANGE: -40 Degrees To 185 Degrees F

MUST BE EQUIVALENT TO BARNES PART NUMBER (C96023)

00074 WIR4433 1,000 FT 07/24/2026

PRIMARY-WIRE,19-STRAND,WHITE,16GA

MATERIAL:

THIS IS A PLASTIC INSULATED SINGLE CONDUCTOR PRIMARY WIRE

2011 SPECIFICATIONS:

PVC Insulation

Stranded Copper Conductor

Resistant To Heat, Moisture, Oil And Weather

Meets SAE J-1128 Type GPT Specifications

50 Volts Maximum

COLOR: White

WIRE GAUGE: No. 16 Gauge

STRAND GAUGE: 29 Gauge

NUMBER OF STRANDS: 19

Page 44 of 53ORDER NUMBER:

NOMINAL OVERALL DIAMETER: .105

00075 WSH0420 700 EA 07/24/2026

LOCK-WASHER,SPLIT,GRD-5-STL,#6,0.25"O.D

ALL SPECIFICATIONS LISTED BELOW ARE MANDATORY!

SPECIFICATIONS:

THIS IS A SPLIT LOCK WASHER ALSO KNOWN AS A SPRING

LOCK WASHER. THESE WASHERS REDUCE THE LIKELIHOOD

THAT THE FASTENED JOINT WILL LOOSEN UNDER SHOCK

OR VIBRATION. THEY FEATURE A SPLIT WITH 1 END BENT

SLIGHTLY OUTWARD TO BITE IN AND PREVENT LOOSENING.

UNDER COMPRESSION, SPRING TENSION FORCES THE SPLIT

ENDS TO DIG INTO MATING SURFACES AND HOLD TIGHT.

1. WASHER TYPE: Lock Washer

2. WASHER STYLE: Split Non-Linking

3. MATERIAL: Grade 5 Carbon Steel

4. RESISTANCE: Good Rust Resistance

5. COATING: Zinc Plated

6. STANDARD OR METRIC: Standard

7. SCREW SIZE: #6

8. INNER DIAMETER: 0.14 Inch

9. OUTER DIAMETER: 0.25 Inch

10. MINIMUM THICKNESS: 0.03 Inch

11. MINIMUM ROCKWELL HARDNESS: C38

12. MINIMUM REQUIRED STANDARD: ASME B18.21.1

BSBM LAST DATA TEXT REVISION 6-24-13

00076 CIB3723 3 EA 07/24/2026

MINI-CIRCUIT-BREAKER,PLUG-IN-TYPE,30AMP

MATERIAL:

THIS IS A PLUG IN TYPE MINI CIRCUIT BREAKER

Page 45 of 53ORDER NUMBER:

12 Volt Electrical Circuits

Modified Reset/Type 2

Direct OEM Replacement For MINI Type Fuse

Exceeds SAE J553 Requirements

OVERALL SIZE: .25 Inch Depth x .44 Inch Width x 1 Inch Height

RATING: 30 AMP

**Breakers Resets Once Power Is Turned Off**

MUST BE EQUIVALENT TO BARNES PART NUMBER (KP4666)

00077 BTT1008 8 EA 07/24/2026

BATTERY-RING-LUG,COPPER,4GA,3/8" Comes in pack of 10 from MSC

ALL SPECIFICATIONS LISTED BELOW ARE MANDATORY!

SPECIFICATIONS:

THIS IS A CRIMP OR SOLDER STYLE RING LUG TYPICALLY USED TO

CONNECT A BATTERY CABLE TO A BATTERY TERMINAL.

1. Heavy Duty Crimp Or Solder Type.

2. Made Of Electrolytic Copper.

3. Tin Plated To Resist Corrosion.

4. Flared For Easy Wire Insertion.

5. Fully Annealed For Easy And Secure Crimping.

6. AWG Identification.

7. UL Listed For 600-Volt Industrial Application.

8. CSA Approved.

9. CABLE SIZE: 4 Gauge

10. STUD SIZE: 3/8 Inch

BSBM LAST DATA TEXT REVISION 11-19-12

00078 BTT1009 60 EA 07/24/2026

Page 46 of 53ORDER NUMBER:

BATTERY-RING-LUG,COPPER,4GA,5/16"

ALL SPECIFICATIONS LISTED BELOW ARE MANDATORY!

SPECIFICATIONS:

THIS IS A CRIMP OR SOLDER STYLE RING LUG TYPICALLY USED TO

CONNECT A BATTERY CABLE TO A BATTERY TERMINAL.

1. Heavy Duty Crimp Or Solder Type.

2. Made Of Electrolytic Copper.

3. Tin Plated To Resist Corrosion.

4. Flared For Easy Wire Insertion.

5. Fully Annealed For Easy And Secure Crimping.

6. AWG Identification.

7. UL Listed For 600-Volt Industrial Application.

8. CSA Approved.

9. CABLE SIZE: 4 Gauge

10. STUD SIZE: 5/16 Inch

BSBM LAST DATA TEXT REVISION 11-19-12

00079 CTR0082 1,000 EA 07/24/2026

BUTT-CONNECTOR,NYLON-INSULATED,16-14ga

MATERIAL:

THIS IS A NYLON-INSULATED BUTT CONNECTOR WITH INSULATION

OVERHANG TO PROVIDE SUPPORT TO WIRE

2011 SPECIFICATIONS:

Nylon Insulated

Insulation Overhang

WIRE SIZE: 16-14 Gauge

INSULATION COLOR: Blue

MUST BE EQUIVALENT TO BARNES PART NUMBER (23035)

Page 47 of 53ORDER NUMBER:

00080 FSE0031 5 EA 07/24/2026

JCASE,FUSE,30AMP,LOW,PROFILE,PINK

ALL SPECIFICATIONS LISTED BELOW ARE MANDATORY!

SPECIFICATIONS:

THIS IS A 30 AMP LOW PROFILE JCASE FUSE. INDUSTRY STANDARD FUSE

DESIGNED FOR LOW-VOLTAGE AUTOMOTIVE AND OTHER

ELECTRONIC APPLICATIONS.

1. JCASE STYLE DESIGN.

2. HIGH AMPERAGE CAPABILITY.

3. PROVIDES INCREASED TIME DELAY.

4. PROVIDES LOW VOLTAGE DROP.

5. UL LISTED.

6. COLOR CODED AMPERAGE RATING.

7. ANSI STANDARD OCR-A FONT FOR VISUAL INSPECTION SYSTEMS.

8. DOUBLE SPRING-BEAM BOX TERMINAL.

9. SECONDARY LOCKING FEATURE TO HOLD TERMINAL FIRMLY IN PLACE.

10. RATING: 30 AMP

11. COLOR CODE: PINK

12. VOLTAGE RATING: 32V AC/DC

13. FUSE STYLE LOW PROFILE

14. OVERALL LENGTH: 14.5MM

15. OVERALL WIDTH: 12MM

16. BLADE STYLE: STANDARD

17. COLOR: PINK

18. OVERALL, HEIGHT: 16mm

19. MATERIAL: PSU (COVER); PA66-GF13 (HOUSING)

00081 FSE0051 135 EA 07/24/2026

MINI-FUSE,15-AMP,BLUE

ALL SPECIFICATIONS LISTED BELOW ARE MANDATORY!

Page 48 of 53ORDER NUMBER:

THIS IS A MINI STYLE INDUSTRY STANDARD FUSE DESIGNED FOR

LOW-VOLTAGE AUTOMOTIVE AND OTHER ELECTRONIC

APPLICATIONS.

1. Mini Style Design.

2. Plastic Housing.

3. Color Coded Amperage Rating.

4. Built To Exacting OEM Specifications.

5. UL Listed.

6. Fast acting.

7. Parallel Tabs.

8. RATING: 15 AMP

9. COLOR CODE: Blue

10. VOLTAGE RATING: 32V AC/DC

11. TAB SIZE: 3/32 Inch

BSBM LAST DATA TEXT REVISION 11-15-12

00082 GRM0033 25 EA 07/24/2026

RUBBER-GROMMET,1/2"-I.D.,3/4"-DIA,1"-O.D

MATERIAL:

THIS IS A RUBBER GROMMET FOR WIRE TUBING EXTENDING

THROUGH PANELS.

SPECIFICATIONS:

MADE OF: RUBBER

COLOR: BLACK

INSIDE DIAMETER: 1/2 Inch

OUTSIDE DIAMETER: 1" Inch

PANEL THICKNESS: 1/8 Inch

PANEL HOLE/GROMMET GROOVE DIAMETER: 3/4 Inch

TYPE: GROMMET

UNSPSC#: 39131603

Page 49 of 53ORDER NUMBER:

00083 HWS6004 6 EA 07/24/2026

FIRE,EXTINGUISHER,REFILLABLE-2.5LBS

MATERIAL:

THIS IS A REFILLABLE FIRE EXTINGUISHER WITH ALUMINUM

VALVE AND VEHICLE BRACKET 2.5 LBS CAPACITY

SPECIFICATIONS:

STEEL FIRE EXTINGUSURE,CLASS A:B:C: TYPE FIRES.

2.5 LBS CHARGE,REFILLABLE

3-3/8" DIAMETER X 4-8/7" WIDTH X 14-3/4" HEIGHT

OPERATING PRESSURE 100 POUNDS_PER

*MUST BE EQUIVALENT TO BUCKEYE PART # 13315*

*MUST INCLUDE ALL INSTALLATION INSTRUCTIONS*

00084 MAT0066 80 EA 07/24/2026

SOUND-DEADENING-PAD-500MM-X-500MM

Description:

Sound Deadening Pads suppress noise and vibration. Conformable to allow easy shaping around a variety of stamped shapes, the pads can be applied to vehicle floor pans, engine compartments, hoods, decklids, as well as inside doors and body panels. Featuring an OEM matching diamond emboss.

Pads are self adhesive, easy to apply and paintable.

Center perforation allows easy door panel installation.

Specifications:

Length: 500 mm

Units per Case: 10

Width: 500 mm

Harmonizing Code: 3921190000

ECCN: EAR99

Page 50 of 53ORDER NUMBER:

00085 NUT0378 100 EA 07/24/2026

LOCK-NUT,NYLON-INSERT,18-8-SSTL,5/16-18

ALL SPECIFICATIONS LISTED BELOW ARE MANDATORY!

SPECIFICATIONS:

THIS IS A HEX NUT WITH A NYLON INSERT. THE

NYLON-INSERT ELEMENT RESISTS VIBRATION, ROTATION,

OR LOOSENING WHEN ENGAGED ON THE THREADS OF A

MATING PART SUCH AS A THREADED BOLT OR ROD.

1. NUT TYPE: Lock-Nut With Insert

2. NUT STYLE: Hex

3. MATERIAL: 18-8 Stainless Steel

4. INSERT MATERIAL: Nylon

5. RESISTANCE: Excellent Corrosion Resistance

6. COATING: None Coated

7. STANDARD OR METRIC: Standard

8. NUT WIDTH: 1/2 Inch

9. NUT HEIGHT: 11/32 Inch

10. THREAD SIZE: 5/16 Inch

11. THREAD PER INCH (TPI): 18

12. THREAD LENGTH TYPE: Fully Threaded

13. MINIMUM THREAD LENGTH: Fully Threaded

14. THREAD DIRECTION: Right-Hand Threads

15. THREAD TYPE: UNC Course Thread

16. THREAD FIT: Class 2B

17. TEMPERATURE RANGE: Up To 250º F

18. MINIMUM ROCKWELL HARDNESS: B55

19. MINIMUM REQUIRED STANDARD: IFI 100/107

BSBM LAST DATA TEXT REVISION 7-1-13

Page 51 of 53ORDER NUMBER:

00086 RIV0318 150 EA 07/24/2026

RIVET-NUT,SLOTTED-BODY,1/4"-20,0.02-0.28

MATERIAL: SLOTTED BODY RIVET NUT

SPECIFICATIONS: MADE OF C1008-C1010 ZINC YELLOW CHROMATE

STEEL; THREADS MEET CLASS 2B; HAS A LARGER BACKSIDE

FLANGE TO INCREASE STRENGTH; IDEAL FOR USE IN PLASTIC

AND THIN MATERIALS; CAN ACCOMMODATE A WIDER RANGE OF

MATERIAL THICKNESSES AS WELL AS SLIGHTLY OVERSIZED HOLES

DIMENSIONS: THREAD SIZE: 1/4"-20;MATERIAL THICKNESS

(GRIP) RANGE:0.020"-0.280";SLOTTED BODY:0.384";LENGTH

FROM UNDER HEAD:1";WIDTH ACROSS HEAD OF RIVET:0.645";

THICKNESS OF HEAD OF RIVET:0.059"

00087 SWH0064 10 EA 07/24/2026

TOGGLE-SWITCH,ON-OFF,SPST,35AMP,12VDC

MATERIAL:

THIS IS A TWO POSITION TOGGLE SWITCH

2011 SPECIFICATIONS:

Single Pole, Single Throw

On-Off Position

2 Blade Terminals

35A@12 VDC Electrical Rating

35A@12 VDC

10A@250 VAC Amps At Given Voltage

MUST BE EQUIVALENT TO BARNES PART NUMBER (KP68345)

00088 TML0215 20 EA 07/24/2026

RING-TERMINAL,NON-INSLTD,6GA,5/16

MATERIAL:

THIS IS A NON-INSULATED RING TERMINAL

Elecro Tin Plated

Page 52 of 53ORDER NUMBER:

Terminal Barrel Is Rolled With Brazed Seam Chamfered To Form

Funnel Entry

Indentions Or Dimples To Provide The Interior Of The BArrel

With Extra Gripping Power

MATERIAL: ETP Copper

WIRE SIZE: 6 Gauge

STUD SIZE: 5/16

MUST BE EQUIVALENT TO BARNES PART NUMBER (23294)

00089 AUT3752 35,904 IN 07/24/2026

HEAT-SHRINK,ADHESIVE-LINED,3/16"

ALL SPECIFICATIONS LISTED BELOW ARE MANDATORY!

SPECIFICATIONS:

THIS IS A 3:1 ADHESIVE LINED HEAT SHRINK TUBING DESIGNED

FOR USE IN WIRE IDENTIFICATION, WIRE BUNDLING, MECHANICAL

PROTECTION, COLOR CODING, LIGHTWEIGHT HARNESSING,

PHYSICAL PROTECTION OF COMPONENTS, STRAIN RELIEF AND

SOLDER INSULATION.

1. Thin Dual Wall Design.

2. Outer Wall Made Of Polyolefin Heat Shrink.

3. Inner Wall Made Of A Hot Melt Adhesive.

4. Inner Layer Provides A Water-Tight Seal.

5. 3:1 Shrink Ratio.

6. NOMINAL SIZE: 0.1875 Inch

7. COLOR: Black

8. OPERATING TEMPERATURE: -55 Degrees C To 100 Degrees C

9. SHRINK TEMPERATURE: 100 Degrees C

00090 CBL6867 6,000 EA 07/24/2026

18100-X,PYTHON,CABLE,TIES

CABLE TIES

SIZE:4 INCH (1000 PER PACK)

BARNES PRODUCTS PART NUMBER:18100-X OR COMPARABLE

Page 53 of 53ORDER NUMBER: