14593 Burgess HRM Report 08.14.2026.pdf

PDF 3 MB Posted

Attached to
Planned Residential Demolition: Group 9. 3. 26 (14593 Burgess - Demo Only)
Solicitation number
300000151967510
Issued by
Michigan

About this file

This is a Hazardous/Regulated Materials Survey & Inspection Report prepared by Environmental Testing & Consulting, Inc. for the City of Detroit Demolition Department regarding a residential property at 14593 Burgess Street, Detroit, Michigan (Parcel #22112398). The inspection was conducted on July 31, 2026, with the report issued on August 14, 2026, in support of a planned residential demolition project (Group 9.3.26). The single-story, 851 square-foot house was built in 1963 with a cinderblock foundation. The survey identified multiple asbestos-containing materials (ACM) throughout the property, including ceiling/wall drywall composite (5,860 SF), transite siding (1,250 SF), asphalt sealant (30 LF), and exterior caulk (410 LF). The engineering survey documented structural damage including water damage affecting multiple functional spaces and holes in the roof, with several areas marked as partially or completely inaccessible. Sample collection occurred on July 31, 2026, with comprehensive laboratory analysis completed by August 5, 2026. The report includes detailed polarized light microscopy (PLM) and point count analysis results for 78 bulk samples across 26 material categories, identifying specific asbestos concentrations and locations throughout interior and exterior areas.

The laboratory analysis results confirmed the presence of asbestos-containing materials at various concentrations. Multiple samples tested positive for chrysotile asbestos, including transite siding at 5% chrysotile, exterior caulk/sealant materials ranging from trace amounts to 8% chrysotile, and certain adhesive and powdery materials. Several samples received "Positive Stop" designations, indicating confirmed asbestos presence that halted further analysis per EPA protocols. Materials with less than 1% asbestos content were classified as trace asbestos. No other hazardous materials or tires were observed at the property. The contractor is responsible for verifying all quantities of identified asbestos during the bid process. The report was prepared by licensed Michigan Asbestos Inspectors Andre Richardson (License #A45125) and reviewed by Mark Smith (License #A55707), with support from Environmental Testing Laboratories, Inc., located in Romulus, Michigan. The detailed material list and sample documentation provide contractors with comprehensive information necessary for developing safe demolition procedures and waste disposal protocols compliant with OSHA and EPA regulations.

View the file

Other files

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Hazardous/Regulated Materials Survey & Inspection Report

14593 Burgess Street, Detroit, MI 48223 Parcel #: 22112398.

Date of Inspection: 07/31/2026 Date of Report: 08/14/2026

Prepared For:

City of Detroit Demolition Department

1301 3rd Avenue, 6th Floor

Detroit, MI 48226

Project #: 2026 BPO 7.20.2026

Fieldwork conducted by: Report Reviewed and Approved by:

Andre Richardson Mark Smith Michigan Asbestos Inspector License #: A45125 Michigan Asbestos Inspector License #: A55707 Inspector’s E-Mail: Andre.Richardson@2etc.com E-Mail: Mark.Smith@2etc.com

38900 West Huron River Drive Romulus, MI 48174

734-955-6600 www.2etc.com

Hazardous/Regulated Materials Survey & Inspection Report ETC Job #: 293121

14593 Burgess Street, Detroit, MI 48223 Parcel #: 22112398.

Asbestos Containing Materials

TABLE 1: ASBESTOS CONTAINING MATERIALS

Category Material Description Location Quantity

M Ceiling/Wall Drywall Composite, White FS 1-7 5860 SF

M Transite Siding, Beige EA 1-4 1250 SF

M Asphalt Sealant, Black EA 1 30 LF

M Exterior Caulk, Beige EA 1-4 410 LF TSI = Thermal System Insulation; S = Surfacing; M = Miscellaneous; SF= Square Feet; LF = Linear Feet;

CY = Cubic Yards; CF = Cubic Feet

Quantities that are listed are estimates only. It is the contractor’s responsibility to verify all amounts of asbestos identified during the bid process.

Hazardous Materials & Tires

TABLE 2: HAZARDOUS MATERIALS

Material Description Location Quantity

None Observed

Engineering Survey

14593 Burgess Street

Reviewed 08/2025

Pre-Demolition Engineering Survey Report

Detroit, MI 48223

Prepared for City of Detroit Demolition Department

1301 Third Street, 6th Floor Detroit, Michigan 48226

Prepared by Environmental Testing & Consulting, Inc.

38900 West Huron River Drive Romulus, MI 48174

Report Date July 30, 2026

Reviewed 08/2025

Survey Details and Site Information Date(s) of Engineering Survey: July 30, 2026

Engineering Survey Inspector name: Jeremy Westcott

Engineering Survey Inspector #: INSP01045

Engineering Survey Inspector email: Jeremy.Westcott@2etc.com

Engineering Survey Inspector phone #: 734-955-6600

Engineering Survey Inspector signature:

Reviewing PE/Architect name:

Reviewing PE/Architect license state/#:

Reviewing PE/Architect email:

Reviewing PE/Architect phone #:

Reviewing PE/Architect signature:

Property Address: 14593 Burgess Street, Detroit, MI 48223

# and types of structure(s): 1 House

Foundation type Cinderblock

Year built: 1963

# of floors: 1

Total square footage: 851 ft2

William Earle, P.E. (WI)

WI 35407-6

William.Earle@oneatlas.com

847-971-0979

Reviewed 08/2025

Engineering Survey Findings – Exterior Areas Designation Inaccessible Reason Description/Notes

EA-1

EA-2

EA-3

EA-4

EA-5

Key:

• Inaccessible: “P” = Partially inaccessible; “C” = Completely inaccessible

• Reason: “F” = Fire damage, “W” = Water damage, “S” = Structural damage, “T” = Termite damage, “O” = Other damage

C S Holes in roof

Reviewed 08/2025

Engineering Survey Findings – Functional Spaces Designation Inaccessible Reason Description/Notes

FS-1

FS-2

FS-3

FS-4 P W Floor is soft on EA2 side

FS-5

FS-6

FS-7 P W Floor is soft on EA2 side

FS-8 P W Floor is soft on EA2 side; exposed ceiling

FS-9

FS-10

FS-11 P W Floor is soft on EA2 side

Key:

• Inaccessible: “P” = Partially inaccessible; “C” = Completely inaccessible

• Reason: “F” = Fire damage, “W” = Water damage, “S” = Structural damage, “T” = Termite damage, “O” = Other damage

Site Drawings

Reviewed 08/2025

Site Photographs

EA1 EA2

EA3 EA4

Reviewed 08/2025

EA5 FS1

FS2 FS3

Reviewed 08/2025

FS4 FS5

FS6 FS7

Reviewed 08/2025

FS8 FS9

FS10 FS11

Electronic Chain of Custody

Submitting Client:

Detroit, MI - 48226

37575 W Huron River Drive

Romulus, Michigan 48174

(734) 955-6600, Fax: (734) 955-6604

Environmental Testing Laboratories, Inc.

City of Detroit - Demolition Department

1301 Third Street - Suite 606

Asbestos-Bulk

72 Hours

No

Yes, 400.00 Points

ETC STND

Sample Type:

Turn Around:

Positive Stop:

Point Counting:

P.C. Criteria:

Sample ID Client Sample ID

ETL Project :Project Location: 29312114593 Burgess, Detroit, MI 48223

Collection DateSample Location Sample Description

1914518 2026-07-311A FS4 Ceiling / Wall / Drywall Composite - White -

HA(1)

1914519 2026-07-311B FS5 Ceiling / Wall / Drywall Composite - White -

HA(1)

1914520 2026-07-311C FS6 Ceiling / Wall / Drywall Composite - White -

HA(1)

1914521 2026-07-312A FS11 Insulation / Rolled-In - Yellow - HA(2)

1914522 2026-07-312B FS11 Insulation / Rolled-In - Yellow - HA(2)

1914523 2026-07-312C FS11 Insulation / Rolled-In - Yellow - HA(2)

1914524 2026-07-313A FS1 Concrete / Floor - Grey - HA(3)

1914525 2026-07-313B FS2 Concrete / Floor - Grey - HA(3)

1914526 2026-07-313C FS1 Concrete / Floor - Grey - HA(3)

1914527 2026-07-314A FS1 Wall (Ext.) / Window (Glazing) - White - HA(4)

1914528 2026-07-314B FS2 Wall (Ext.) / Window (Glazing) - White - HA(4)

1914529 2026-07-314C FS1 Wall (Ext.) / Window (Glazing) - White - HA(4)

1914530 2026-07-315A FS7 Floor / Tile - Brown & Grey - HA(5)

1914531 2026-07-315B FS7 Floor / Tile - Brown & Grey - HA(5)

1914532 2026-07-315C FS7 Floor / Tile - Brown & Grey - HA(5)

1914533 2026-07-316A FS7 Floor / Tile Mastic - Clear - HA(6)

1914534 2026-07-316B FS7 Floor / Tile Mastic - Clear - HA(6)

1914535 2026-07-316C FS7 Floor / Tile Mastic - Clear - HA(6)

1914536 2026-07-317A FS7 Ceramic Tile / Tile - White - HA(7)

Sample ID Client Sample ID

ETL Project :Project Location: 29312114593 Burgess, Detroit, MI 48223

Collection DateSample Location Sample Description

1914537 2026-07-317B FS7 Ceramic Tile / Tile - White - HA(7)

1914538 2026-07-317C FS7 Ceramic Tile / Tile - White - HA(7)

1914539 2026-07-318A FS7 Ceramic Tile / Adhesive - Brown - HA(8)

1914540 2026-07-318B FS7 Ceramic Tile / Adhesive - Brown - HA(8)

1914541 2026-07-318C FS7 Ceramic Tile / Adhesive - Brown - HA(8)

1914542 2026-07-319A FS10 Ceiling / Tile - White - HA(9)

1914543 2026-07-319B FS10 Ceiling / Tile - White - HA(9)

1914544 2026-07-319C FS10 Ceiling / Tile - White - HA(9)

1914545 2026-07-3110A FS10 Ceiling / Glue Pod - Brown - HA(10)

1914546 2026-07-3110B FS10 Ceiling / Glue Pod - Brown - HA(10)

1914547 2026-07-3110C FS10 Ceiling / Glue Pod - Brown - HA(10)

1914548 2026-07-3111A EA1 Concrete / Porch - Grey - HA(11)

1914549 2026-07-3111B EA1 Concrete / Porch - Grey - HA(11)

1914550 2026-07-3111C EA1 Concrete / Porch - Grey - HA(11)

1914551 2026-07-3112A EA1 Concrete / Walkway - Grey - HA(12)

1914552 2026-07-3112B EA2 Concrete / Walkway - Grey - HA(12)

1914553 2026-07-3112C EA3 Concrete / Walkway - Grey - HA(12)

1914554 2026-07-3113A EA2 Concrete / Driveway - Grey - HA(13)

1914555 2026-07-3113B EA2 Concrete / Driveway - Grey - HA(13)

1914556 2026-07-3113C EA2 Concrete / Driveway - Grey - HA(13)

1914557 2026-07-3114A EA1 Transite / Siding - Beige - HA(14)

1914558 2026-07-3114B EA2 Transite / Siding - Beige - HA(14)

1914559 2026-07-3114C EA3 Transite / Siding - Beige - HA(14)

1914560 2026-07-3115A EA1 Transite Seam-Tape - Black - HA(15)

1914561 2026-07-3115B EA2 Transite Seam-Tape - Black - HA(15)

1914562 2026-07-3115C EA3 Transite Seam-Tape - Black - HA(15)

1914563 2026-07-3116A EA1 Wall (Ext.) / Vapor Barrier - Black - HA(16)

1914564 2026-07-3116B EA2 Wall (Ext.) / Vapor Barrier - Black - HA(16)

Collection DateSample Location Sample Description

1914565 2026-07-3116C EA3 Wall (Ext.) / Vapor Barrier - Black - HA(16)

1914566 2026-07-3117A EA1 Concrete / Wall - Grey - HA(17)

1914567 2026-07-3117B EA2 Concrete / Wall - Grey - HA(17)

1914568 2026-07-3117C EA3 Concrete / Wall - Grey - HA(17)

1914569 2026-07-3118A EA1 Wall (Ext.) / Brick - Grey - HA(18)

1914570 2026-07-3118B EA1 Wall (Ext.) / Brick - Grey - HA(18)

1914571 2026-07-3118C EA1 Wall (Ext.) / Brick - Grey - HA(18)

1914572 2026-07-3119A EA1 Caulk / Exterior - Brown - HA(19)

1914573 2026-07-3119B EA2 Caulk / Exterior - Brown - HA(19)

1914574 2026-07-3119C EA3 Caulk / Exterior - Brown - HA(19)

1914575 2026-07-3120A EA1 Caulk / Exterior - Black - HA(20)

1914576 2026-07-3120B EA2 Caulk / Exterior - Black - HA(20)

1914577 2026-07-3120C EA3 Caulk / Exterior - Black - HA(20)

1914578 2026-07-3121A EA1 Asphalt Sealant - Black - HA(21)

1914579 2026-07-3121B EA1 Asphalt Sealant - Black - HA(21)

1914580 2026-07-3121C EA1 Asphalt Sealant - Black - HA(21)

1914581 2026-07-3122A EA1 Cinderblock - Grey - HA(22)

1914582 2026-07-3122B EA1 Cinderblock - Grey - HA(22)

1914583 2026-07-3122C EA1 Cinderblock - Grey - HA(22)

1914584 2026-07-3123A EA1 Mortar / Cinderblock - Grey - HA(23)

1914585 2026-07-3123B EA1 Mortar / Cinderblock - Grey - HA(23)

1914586 2026-07-3123C EA1 Mortar / Cinderblock - Grey - HA(23)

1914587 2026-07-3124A EA5 Roofing / Asphalt (Shingles) - Black - HA(24)

1914588 2026-07-3124B EA5 Roofing / Asphalt (Shingles) - Black - HA(24)

1914589 2026-07-3124C EA5 Roofing / Asphalt (Shingles) - Black - HA(24)

1914590 2026-07-3125A EA5 Roofing / Tar Paper - Black - HA(25)

1914591 2026-07-3125B EA5 Roofing / Tar Paper - Black - HA(25)

1914592 2026-07-3125C EA5 Roofing / Tar Paper - Black - HA(25)

Collection DateSample Location Sample Description

1914593 2026-07-3126A EA1 Caulk / Exterior - Beige - HA(26)

1914594 2026-07-3126B EA2 Caulk / Exterior - Beige - HA(26)

1914595 2026-07-3126C EA3 Caulk / Exterior - Beige - HA(26)

Seal Intact:

Preservative (if required):

Containers Labled :

Yes

Yes

Analyst

Yes

Collection DateSample Location Sample Description

Received By:

Received Date:

Relinquished By:

Relinquished Date:

James Farinas

2026-07-31 09:49 AM

Andre Richardson

Jul 31 2026 12:00AM Asha Davidson

Ben Jones

Chris Canilao

OJ Ivey

Teagan Murphy

Tia Ray

Material List

Client : City of Detroit - Demolition Department 1301 Third Street - Suite 606 Detroit, MI - 48226

Project Location: 14593 Burgess st. Detroit Mi. Job #:293121

Material Id Material Description Material Sub Classification Size Quantity Locations

1 Ceiling / Wall/D rywall Composite-White Drywall Composite M 5860 S F F S-01,F S-02,F S-03,F S-04,F S-05,F S-06,F S-07

2 Insulation/Rolled-In-Yellow Rolled-In T 798 S F F S-11

3 Concrete/F loor-Grey F loor M 790 S F F S-01,F S-02

4 Wall (Ext.)/Window (Glazing)-White Window (Glazing) M 7 Unit E A-01,E A-02,E A-03,E A-04

5 F loor/Ti le-B rown & Grey Tile M 68 S F F S-07

6 F loor/Ti le Mastic-C lear Ti le Mastic M 68 S F F S-07

7 Ceramic Ti le/Ti le-White Ti le M 97 S F F S-07

8 Ceramic Ti le/Adhesive-Brown Adhesive M 97 S F F S-07

9 Ceiling/Ti le-White Ti le M 185 S F F S-10

10 Ceiling/Glue Pod-Brown Glue Pod M 185 S F F S-10

11 Concrete/Porch-Grey Porch M 25 S F E A-01

12 Concrete/Walkway-Grey Walkway M 185 S F E A-01,E A-02,E A-03,E A-04

13 Concrete/D riveway-Grey Driveway M 650 S F E A-02

14 Transite/S iding-Beige S iding M 1250 S F E A-02,E A-03,E A-01,E A-04

15 Transite Seam-Tape-B lack M 1250

16 Wall (Ext.)/Vapor Barrier-B lack Vapor Barrier M 1250 S F E A-01,E A-02,E A-03,E A-04

17 Concrete/Wall-Grey Wall M 980 S F E A-01,E A-02,E A-03,E A-04

18 Wall (Ext.)/B rick-Grey Brick M 89 S F E A-01

19 Caulk/Exterior-B rown Exterior M 285 LF E A-01,E A-02,E A-03,E A-04

20 Caulk/Exterior-B lack Exterior M 290 LF E A-01,E A-02,E A-03,E A-04

21 Asphalt Sealant-B lack M 30 LF E A-01

22 C inderblock-Grey M 50 S F E A-09,E A-01

23 Mortar/C inderblock-Grey C inderblock M 50 S F E A-01

24 Roofing/Asphalt (Shingles)-B lack Asphalt (Shingles) M 990 S F E A-05

25 Roofing/Tar Paper-B lack Tar Paper M 990 S F E A-05

26 Caulk/Exterior-Beige Exterior M 410 LF E A-01,E A-02,E A-03,E A-04

Environmental Testing Laboratories, Inc.

37575 W Huron River Drive Romulus, Michigan 48174

(734) 955-6600

Fax: (734) 955-6604

To:

Attention:

Environmental Testing And Consulting Inc.

38900 Huron River Drive

Romulus, MI 48174

Project Location: 14593 Burgess, Detroit, MI 48223

Client Project: 293121

293121ETL Job:

Al Dyer

Report Issued: 08/05/2026

Lab Sample Number Client Sample Number Sample Type CompletedSampled Analyst

1914518 Asbestos1A 08/05/2026 Asha Davidson07/31/2026

1914519 Asbestos1B 08/05/2026 Asha Davidson07/31/2026

1914520 Asbestos1C 08/05/2026 Asha Davidson07/31/2026

1914521 Asbestos2A 08/05/2026 Asha Davidson07/31/2026

1914522 Asbestos2B 08/05/2026 Asha Davidson07/31/2026

1914523 Asbestos2C 08/05/2026 Asha Davidson07/31/2026

1914524 Asbestos3A 08/05/2026 Asha Davidson07/31/2026

1914525 Asbestos3B 08/05/2026 Asha Davidson07/31/2026

1914526 Asbestos3C 08/05/2026 Asha Davidson07/31/2026

1914527 Asbestos4A 08/05/2026 Teagan Murphy07/31/2026

1914528 Asbestos4B 08/05/2026 Teagan Murphy07/31/2026

1914529 Asbestos4C 08/05/2026 Teagan Murphy07/31/2026

1914530 Asbestos5A 08/05/2026 Teagan Murphy07/31/2026

1914531 Asbestos5B 08/05/2026 Teagan Murphy07/31/2026

1914532 Asbestos5C 08/05/2026 Teagan Murphy07/31/2026

1914533 Asbestos6A 08/05/2026 Teagan Murphy07/31/2026

This report is intended for use solely by the individual or entity to which it is addressed. This report may not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government. It may contain information that is privileged, confidential and otherwise exempt by law from disclosure. If the reader of this information is not the intended recipient or an employee of its intended recipient, you are herewith notified that any dissemination, distribution or copying of this information is strictly prohibited. If you have received this information in error, please notify ETL immediately. Thank you.

Lab Sample Number Client Sample Number Sample Type CompletedSampled Analyst

1914534 Asbestos6B 08/05/2026 Teagan Murphy07/31/2026

1914535 Asbestos6C 08/05/2026 Teagan Murphy07/31/2026

1914536 Asbestos7A 08/05/2026 Teagan Murphy07/31/2026

1914537 Asbestos7B 08/05/2026 Teagan Murphy07/31/2026

1914538 Asbestos7C 08/05/2026 Teagan Murphy07/31/2026

1914539 Asbestos8A 08/05/2026 Teagan Murphy07/31/2026

1914540 Asbestos8B 08/05/2026 Teagan Murphy07/31/2026

1914541 Asbestos8C 08/05/2026 Teagan Murphy07/31/2026

1914542 Asbestos9A 08/05/2026 Teagan Murphy07/31/2026

1914543 Asbestos9B 08/05/2026 Teagan Murphy07/31/2026

1914544 Asbestos9C 08/05/2026 Teagan Murphy07/31/2026

1914545 Asbestos10A 08/05/2026 Teagan Murphy07/31/2026

1914546 Asbestos10B 08/05/2026 Teagan Murphy07/31/2026

1914547 Asbestos10C 08/05/2026 Teagan Murphy07/31/2026

1914548 Asbestos11A 08/05/2026 Chris Canilao07/31/2026

1914549 Asbestos11B 08/05/2026 Chris Canilao07/31/2026

1914550 Asbestos11C 08/05/2026 Chris Canilao07/31/2026

1914551 Asbestos12A 08/05/2026 Chris Canilao07/31/2026

1914552 Asbestos12B 08/05/2026 Chris Canilao07/31/2026

1914553 Asbestos12C 08/05/2026 Chris Canilao07/31/2026

1914554 Asbestos13A 08/05/2026 Chris Canilao07/31/2026

1914555 Asbestos13B 08/05/2026 Chris Canilao07/31/2026

1914556 Asbestos13C 08/05/2026 Chris Canilao07/31/2026

1914557 Asbestos14A 08/05/2026 Ben Jones07/31/2026

1914558 Asbestos14B 08/05/2026 Ben Jones07/31/2026

1914559 Asbestos14C 08/05/2026 Ben Jones07/31/2026

This report is intended for use solely by the individual or entity to which it is addressed. This report may not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government. It may contain information that is privileged, confidential and otherwise exempt by law from disclosure. If the reader of this information is not the intended recipient or an employee of its intended recipient, you are herewith notified that any dissemination, distribution or copying of this information is strictly prohibited. If you have received this

1914560 Asbestos15A 08/05/2026 Ben Jones07/31/2026

1914561 Asbestos15B 08/05/2026 Ben Jones07/31/2026

1914562 Asbestos15C 08/05/2026 Ben Jones07/31/2026

1914563 Asbestos16A 08/05/2026 Ben Jones07/31/2026

1914564 Asbestos16B 08/05/2026 Ben Jones07/31/2026

1914565 Asbestos16C 08/05/2026 Ben Jones07/31/2026

1914566 Asbestos17A 08/05/2026 Tia Ray07/31/2026

1914567 Asbestos17B 08/05/2026 Tia Ray07/31/2026

1914568 Asbestos17C 08/05/2026 Tia Ray07/31/2026

1914569 Asbestos18A 08/05/2026 Tia Ray07/31/2026

1914570 Asbestos18B 08/05/2026 Tia Ray07/31/2026

1914571 Asbestos18C 08/05/2026 Tia Ray07/31/2026

1914572 Asbestos19A 08/05/2026 Tia Ray07/31/2026

1914573 Asbestos19B 08/05/2026 Tia Ray07/31/2026

1914574 Asbestos19C 08/05/2026 Tia Ray07/31/2026

1914575 Asbestos20A 08/05/2026 Asha Davidson07/31/2026

1914576 Asbestos20B 08/05/2026 Asha Davidson07/31/2026

1914577 Asbestos20C 08/05/2026 Asha Davidson07/31/2026

1914578 Asbestos21A 08/05/2026 Asha Davidson07/31/2026

1914579 Asbestos21B 08/05/2026 Asha Davidson07/31/2026

1914580 Asbestos21C 08/05/2026 Asha Davidson07/31/2026

1914581 Asbestos22A 08/05/2026 Asha Davidson07/31/2026

1914582 Asbestos22B 08/05/2026 Asha Davidson07/31/2026

1914583 Asbestos22C 08/05/2026 Asha Davidson07/31/2026

1914584 Asbestos23A 08/05/2026 Asha Davidson07/31/2026

1914585 Asbestos23B 08/05/2026 Asha Davidson07/31/2026

This report is intended for use solely by the individual or entity to which it is addressed. This report may not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government. It may contain information that is privileged, confidential and otherwise exempt by law from disclosure. If the reader of this information is not the intended recipient or an employee of its intended recipient, you are herewith notified that any dissemination, distribution or copying of this information is strictly prohibited. If you have received this

1914586 Asbestos23C 08/05/2026 Asha Davidson07/31/2026

1914587 Asbestos24A 08/05/2026 OJ Ivey07/31/2026

1914588 Asbestos24B 08/05/2026 OJ Ivey07/31/2026

1914589 Asbestos24C 08/05/2026 OJ Ivey07/31/2026

1914590 Asbestos25A 08/05/2026 OJ Ivey07/31/2026

1914591 Asbestos25B 08/05/2026 OJ Ivey07/31/2026

1914592 Asbestos25C 08/05/2026 OJ Ivey07/31/2026

1914593 Asbestos26A 08/05/2026 OJ Ivey07/31/2026

1914594 Asbestos26B 08/05/2026 OJ Ivey07/31/2026

1914595 Asbestos26C 08/05/2026 OJ Ivey07/31/2026

Reviewed by:

Summary

Sample Layer MasticMethod

PLM 78 8

Point Count 5

Dawson Bradley

This report is intended for use solely by the individual or entity to which it is addressed. This report may not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government. It may contain information that is privileged, confidential and otherwise exempt by law from disclosure. If the reader of this information is not the intended recipient or an employee of its intended recipient, you are herewith notified that any dissemination, distribution or copying of this information is strictly prohibited. If you have received this

Certificate of Analysis

Polarized Light Microscopy Asbestos Analysis Report

Location :

To :

Romulus,MI 48174

Environmental Testing And Consulting Inc.

38900 Huron River Drive

14593 Burgess, Detroit, MI 48223

ETL Job :

Client Project :

293121

293121

Environmental Testing Laboratories, Inc.

37575 W Huron River Drive

Romulus, Michigan 48174

(734) 955-6600, Fax: (734) 955-6604

Sample Description Appearance % Fibrous % Non-Fibrous % Asbestos

07/31/2026

07/31/2026

Date Collected :

Date Received :

PLM None Detected 1914518

1A PLM 100% OtherPLM Trace CelluloseWhiteCeiling / Wall / Drywall

Composite - White - HA(1) Non-Fibrous

HomogenousFS4

Layer-1 Analyst: Asha Davidson

Date Analyzed : 08/05/2026

PLM 2% Chrysotile1914518

1A PLM 98% OtherPLM Trace CelluloseWhiteMud

Non-Fibrous

HomogenousFS4

Layer-2 Analyst: Asha Davidson

Date Analyzed : 08/05/2026

PLM None Detected 1914518

1A PLM 5% OtherPLM 95% CelluloseRedPaper Backing

Fibrous

HomogenousFS4

Layer-3 Analyst: Asha Davidson

Date Analyzed : 08/05/2026

PLM None Detected 1914519

1B PLM 100% OtherPLM Trace CelluloseWhiteCeiling / Wall / Drywall

Composite - White - HA(1) Non-Fibrous

HomogenousFS5

Layer-1 Analyst: Asha Davidson

Date Analyzed : 08/05/2026

1914519

1B

Positive Stop

FS5

Layer-2 Analyst: Asha Davidson

Date Analyzed : 08/05/2026

Layer Not Analyzed

PLM None Detected 1914519

1B PLM 5% OtherPLM 95% CelluloseRedPaper Backing

Fibrous

HomogenousFS5

Layer-3 Analyst: Asha Davidson

Date Analyzed : 08/05/2026

ETL, Inc. maintains liability limited to cost of analysis. This report relates only to the samples reported and may not be reproduced without written approval by ETL, Inc. Test Method EPA 600/R-93-116 & EPA 600/M4-82/020 or NYSDOH-ELAP item 198.1 and/or 198.6 was used to analyze all samples. Matrix interference and/or resolution limits (i.e. detecting asbestos in non-friable organically bound materials) may yield false results in certain circumstances. Quantitative transmission electron microscopy (TEM) is currently the only method that can pronounce materials as non-asbestos containing. Interpretation and use of test results are the responsibility of the client. ETL, Inc. is not responsible for the accuracy of the results when requested to physically separate and analyze layered samples. Any

PLM results below 10% should be re-analyzed using the EPA recommended Point Count method. Any material that has greater than 1% asbestos content is considered to be an Asbestos Containing Material (ACM). These materials are regulated by both OSHA and the EPA and must be treated accordingly. Results are related to only to samples that were tested. An estimate of uncertainty can be provided at the client's request.

Polarized Light Microscopy Asbestos Analysis Report

Location :

To :

Romulus,MI 48174

Environmental Testing And Consulting Inc.

38900 Huron River Drive

14593 Burgess, Detroit, MI 48223

ETL Job :

Client Project :

293121

293121

Environmental Testing Laboratories, Inc.

37575 W Huron River Drive

Romulus, Michigan 48174

(734) 955-6600, Fax: (734) 955-6604

Sample Description Appearance % Fibrous % Non-Fibrous % Asbestos

07/31/2026

07/31/2026

Date Collected :

Date Received :

PLM None Detected 1914520

1C PLM 100% OtherPLM Trace CelluloseWhiteCeiling / Wall / Drywall

Composite - White - HA(1) Non-Fibrous

HomogenousFS6

Layer-1 Analyst: Asha Davidson

Date Analyzed : 08/05/2026

1914520

1C

Positive Stop

FS6

Layer-2 Analyst: Asha Davidson

Date Analyzed : 08/05/2026

Layer Not Analyzed

PLM None Detected 1914520

1C PLM 5% OtherPLM 95% CelluloseRedPaper Backing

Fibrous

HomogenousFS6

Layer-3 Analyst: Asha Davidson

Date Analyzed : 08/05/2026

PLM None Detected 1914521

2A PLM 5% OtherPLM 95% CelluloseYellow/WhiteInsulation / Rolled-In - Yellow -

HA(2) Fibrous

Non-HomogenousFS11

Layer-1 Analyst: Asha Davidson

Date Analyzed : 08/05/2026

With Fibrous Material

PLM None Detected 1914521

2A PLM 5% OtherPLM 95% CelluloseBlackFibrous Backing

Fibrous

HomogenousFS11

Layer-2 Analyst: Asha Davidson

Date Analyzed : 08/05/2026

ETL, Inc. maintains liability limited to cost of analysis. This report relates only to the samples reported and may not be reproduced without written approval by ETL, Inc. Test Method EPA 600/R-93-116 & EPA 600/M4-82/020 or NYSDOH-ELAP item 198.1 and/or 198.6 was used to analyze all samples. Matrix interference and/or resolution limits (i.e. detecting asbestos in non-friable organically bound materials) may yield false results in certain circumstances. Quantitative transmission electron microscopy (TEM) is currently the only method that can pronounce materials as non-asbestos containing. Interpretation and use of test results are the responsibility of the client. ETL, Inc. is not responsible for the accuracy of the results when requested to physically separate and analyze layered samples. Any

PLM results below 10% should be re-analyzed using the EPA recommended Point Count method. Any material that has greater than 1% asbestos content is considered to be an Asbestos Containing Material (ACM). These materials are regulated by both OSHA and the EPA and must be treated accordingly. Results are related to only to samples that were tested. An estimate of uncertainty can be provided at the client's request.

Polarized Light Microscopy Asbestos Analysis Report

Location :

To :

Romulus,MI 48174

Environmental Testing And Consulting Inc.

38900 Huron River Drive

14593 Burgess, Detroit, MI 48223

ETL Job :

Client Project :

293121

293121

Environmental Testing Laboratories, Inc.

37575 W Huron River Drive

Romulus, Michigan 48174

(734) 955-6600, Fax: (734) 955-6604

Sample Description Appearance % Fibrous % Non-Fibrous % Asbestos

07/31/2026

07/31/2026

Date Collected :

Date Received :

PLM None Detected 1914522

2B PLM 5% OtherPLM 95% CelluloseYellowInsulation / Rolled-In - Yellow -

HA(2) Fibrous

HomogenousFS11

Layer-1 Analyst: Asha Davidson

Date Analyzed : 08/05/2026

PLM None Detected 1914522

2B PLM 5% OtherPLM 95% CelluloseBlackFibrous Backing

Fibrous

HomogenousFS11

Layer-2 Analyst: Asha Davidson

Date Analyzed : 08/05/2026

PLM None Detected 1914523

2C PLM 5% OtherPLM 95% CelluloseYellowInsulation / Rolled-In - Yellow -

HA(2) Fibrous

HomogenousFS11

Layer-1 Analyst: Asha Davidson

Date Analyzed : 08/05/2026

PLM None Detected 1914523

2C PLM 5% OtherPLM 95% CelluloseBlackFibrous Backing

Fibrous

HomogenousFS11

Layer-2 Analyst: Asha Davidson

Date Analyzed : 08/05/2026

PLM None Detected 1914524

3A PLM 100% OtherPLM Trace CelluloseGreyConcrete / Floor - Grey - HA(3)

Non-Fibrous

HomogenousFS1

Layer-1 Analyst: Asha Davidson

Date Analyzed : 08/05/2026

PLM None Detected 1914525

3B PLM 100% OtherPLM Trace CelluloseGreyConcrete / Floor - Grey - HA(3)

Non-Fibrous

HomogenousFS2

Layer-1 Analyst: Asha Davidson

Date Analyzed : 08/05/2026

ETL, Inc. maintains liability limited to cost of analysis. This report relates only to the samples reported and may not be reproduced without written approval by ETL, Inc. Test Method EPA 600/R-93-116 & EPA 600/M4-82/020 or NYSDOH-ELAP item 198.1 and/or 198.6 was used to analyze all samples. Matrix interference and/or resolution limits (i.e. detecting asbestos in non-friable organically bound materials) may yield false results in certain circumstances. Quantitative transmission electron microscopy (TEM) is currently the only method that can pronounce materials as non-asbestos containing. Interpretation and use of test results are the responsibility of the client. ETL, Inc. is not responsible for the accuracy of the results when requested to physically separate and analyze layered samples. Any

PLM results below 10% should be re-analyzed using the EPA recommended Point Count method. Any material that has greater than 1% asbestos content is considered to be an Asbestos Containing Material (ACM). These materials are regulated by both OSHA and the EPA and must be treated accordingly. Results are related to only to samples that were tested. An estimate of uncertainty can be provided at the client's request.

Polarized Light Microscopy Asbestos Analysis Report

Location :

To :

Romulus,MI 48174

Environmental Testing And Consulting Inc.

38900 Huron River Drive

14593 Burgess, Detroit, MI 48223

ETL Job :

Client Project :

293121

293121

Environmental Testing Laboratories, Inc.

37575 W Huron River Drive

Romulus, Michigan 48174

(734) 955-6600, Fax: (734) 955-6604

Sample Description Appearance % Fibrous % Non-Fibrous % Asbestos

07/31/2026

07/31/2026

Date Collected :

Date Received :

PLM None Detected 1914526

3C PLM 100% OtherPLM Trace CelluloseGreyConcrete / Floor - Grey - HA(3)

Non-Fibrous

HomogenousFS1

Layer-1 Analyst: Asha Davidson

Date Analyzed : 08/05/2026

PC 0.25% Chrysotile1914527

4A PC 99.75% OtherWhiteWall (Ext.) / Window (Glazing) -

White - HA(4) Non-Fibrous

HomogenousFS1

Layer-1 Analyst: Teagan Murphy

Date Analyzed : 08/05/2026

PC Trace Chrysotile1914528

4B PC 100% OtherWhiteWall (Ext.) / Window (Glazing) -

White - HA(4) Non-Fibrous

HomogenousFS2

Layer-1 Analyst: Teagan Murphy

Date Analyzed : 08/05/2026

PC Trace Chrysotile1914529

4C PC 100% OtherWhiteWall (Ext.) / Window (Glazing) -

White - HA(4) Non-Fibrous

HomogenousFS1

Layer-1 Analyst: Teagan Murphy

Date Analyzed : 08/05/2026

PLM None Detected 1914530

5A PLM 100% OtherBrown/GreyFloor / Tile - Brown & Grey -

HA(5) Non-Fibrous

HomogenousFS7

Layer-1 Analyst: Teagan Murphy

Date Analyzed : 08/05/2026

PLM None Detected 1914531

5B PLM 100% OtherBrown/GreyFloor / Tile - Brown & Grey -

HA(5) Non-Fibrous

HomogenousFS7

Layer-1 Analyst: Teagan Murphy

Date Analyzed : 08/05/2026

ETL, Inc. maintains liability limited to cost of analysis. This report relates only to the samples reported and may not be reproduced without written approval by ETL, Inc. Test Method EPA 600/R-93-116 & EPA 600/M4-82/020 or NYSDOH-ELAP item 198.1 and/or 198.6 was used to analyze all samples. Matrix interference and/or resolution limits (i.e. detecting asbestos in non-friable organically bound materials) may yield false results in certain circumstances. Quantitative transmission electron microscopy (TEM) is currently the only method that can pronounce materials as non-asbestos containing. Interpretation and use of test results are the responsibility of the client. ETL, Inc. is not responsible for the accuracy of the results when requested to physically separate and analyze layered samples. Any

PLM results below 10% should be re-analyzed using the EPA recommended Point Count method. Any material that has greater than 1% asbestos content is considered to be an Asbestos Containing Material (ACM). These materials are regulated by both OSHA and the EPA and must be treated accordingly. Results are related to only to samples that were tested. An estimate of uncertainty can be provided at the client's request.

Polarized Light Microscopy Asbestos Analysis Report

Location :

To :

Romulus,MI 48174

Environmental Testing And Consulting Inc.

38900 Huron River Drive

14593 Burgess, Detroit, MI 48223

ETL Job :

Client Project :

293121

293121

Environmental Testing Laboratories, Inc.

37575 W Huron River Drive

Romulus, Michigan 48174

(734) 955-6600, Fax: (734) 955-6604

Sample Description Appearance % Fibrous % Non-Fibrous % Asbestos

07/31/2026

07/31/2026

Date Collected :

Date Received :

PLM None Detected 1914532

5C PLM 100% OtherBrown/GreyFloor / Tile - Brown & Grey -

HA(5) Non-Fibrous

HomogenousFS7

Layer-1 Analyst: Teagan Murphy

Date Analyzed : 08/05/2026

PLM None Detected 1914533

6A PLM 99% OtherPLM 1% CelluloseClearFloor / Tile Mastic - Clear -

HA(6) Non-Fibrous

HomogenousFS7

Layer-1 Analyst: Teagan Murphy

Date Analyzed : 08/05/2026

PLM None Detected 1914534

6B PLM 99% OtherPLM 1% CelluloseClearFloor / Tile Mastic - Clear -

HA(6) Non-Fibrous

HomogenousFS7

Layer-1 Analyst: Teagan Murphy

Date Analyzed : 08/05/2026

PLM None Detected 1914535

6C PLM 99% OtherPLM 1% CelluloseClearFloor / Tile Mastic - Clear -

HA(6) Non-Fibrous

HomogenousFS7

Layer-1 Analyst: Teagan Murphy

Date Analyzed : 08/05/2026

PLM None Detected 1914535

6C PLM 98% OtherPLM 2% CelluloseWhitePowdery Material

Non-Fibrous

HomogenousFS7

Layer-2 Analyst: Teagan Murphy

Date Analyzed : 08/05/2026

ETL, Inc. maintains liability limited to cost of analysis. This report relates only to the samples reported and may not be reproduced without written approval by ETL, Inc. Test Method EPA 600/R-93-116 & EPA 600/M4-82/020 or NYSDOH-ELAP item 198.1 and/or 198.6 was used to analyze all samples. Matrix interference and/or resolution limits (i.e. detecting asbestos in non-friable organically bound materials) may yield false results in certain circumstances. Quantitative transmission electron microscopy (TEM) is currently the only method that can pronounce materials as non-asbestos containing. Interpretation and use of test results are the responsibility of the client. ETL, Inc. is not responsible for the accuracy of the results when requested to physically separate and analyze layered samples. Any

PLM results below 10% should be re-analyzed using the EPA recommended Point Count method. Any material that has greater than 1% asbestos content is considered to be an Asbestos Containing Material (ACM). These materials are regulated by both OSHA and the EPA and must be treated accordingly. Results are related to only to samples that were tested. An estimate of uncertainty can be provided at the client's request.

Polarized Light Microscopy Asbestos Analysis Report

Location :

To :

Romulus,MI 48174

Environmental Testing And Consulting Inc.

38900 Huron River Drive

14593 Burgess, Detroit, MI 48223

ETL Job :

Client Project :

293121

293121

Environmental Testing Laboratories, Inc.

37575 W Huron River Drive

Romulus, Michigan 48174

(734) 955-6600, Fax: (734) 955-6604

Sample Description Appearance % Fibrous % Non-Fibrous % Asbestos

07/31/2026

07/31/2026

Date Collected :

Date Received :

PLM None Detected 1914536

7A PLM 99% Ceramic

PLM 1% Other

WhiteCeramic Tile / Tile - White -

HA(7) Non-Fibrous

HomogenousFS7

Layer-1 Analyst: Teagan Murphy

Date Analyzed : 08/05/2026

PLM None Detected 1914536

7A PLM 99% OtherPLM 1% CelluloseWhiteGrout

Non-Fibrous

HomogenousFS7

Layer-2 Analyst: Teagan Murphy

Date Analyzed : 08/05/2026

PLM None Detected 1914537

7B PLM 99% Ceramic

PLM 1% Other

WhiteCeramic Tile / Tile - White -

HA(7) Non-Fibrous

HomogenousFS7

Layer-1 Analyst: Teagan Murphy

Date Analyzed : 08/05/2026

PLM None Detected 1914538

7C PLM 99% Ceramic

PLM 1% Other

WhiteCeramic Tile / Tile - White -

HA(7) Non-Fibrous

HomogenousFS7

Layer-1 Analyst: Teagan Murphy

Date Analyzed : 08/05/2026

PLM None Detected 1914539

8A PLM 97% OtherPLM 3% CelluloseBrownCeramic Tile / Adhesive - Brown

- HA(8) Non-Fibrous

HomogenousFS7

Layer-1 Analyst: Teagan Murphy

Date Analyzed : 08/05/2026

ETL, Inc. maintains liability limited to cost of analysis. This report relates only to the samples reported and may not be reproduced without written approval by ETL, Inc. Test Method EPA 600/R-93-116 & EPA 600/M4-82/020 or NYSDOH-ELAP item 198.1 and/or 198.6 was used to analyze all samples. Matrix interference and/or resolution limits (i.e. detecting asbestos in non-friable organically bound materials) may yield false results in certain circumstances. Quantitative transmission electron microscopy (TEM) is currently the only method that can pronounce materials as non-asbestos containing. Interpretation and use of test results are the responsibility of the client. ETL, Inc. is not responsible for the accuracy of the results when requested to physically separate and analyze layered samples. Any

PLM results below 10% should be re-analyzed using the EPA recommended Point Count method. Any material that has greater than 1% asbestos content is considered to be an Asbestos Containing Material (ACM). These materials are regulated by both OSHA and the EPA and must be treated accordingly. Results are related to only to samples that were tested. An estimate of uncertainty can be provided at the client's request.

Polarized Light Microscopy Asbestos Analysis Report

Location :

To :

Romulus,MI 48174

Environmental Testing And Consulting Inc.

38900 Huron River Drive

14593 Burgess, Detroit, MI 48223

ETL Job :

Client Project :

293121

293121

Environmental Testing Laboratories, Inc.

37575 W Huron River Drive

Romulus, Michigan 48174

(734) 955-6600, Fax: (734) 955-6604

Sample Description Appearance % Fibrous % Non-Fibrous % Asbestos

07/31/2026

07/31/2026

Date Collected :

Date Received :

PLM None Detected 1914540

8B PLM 97% OtherPLM 3% CelluloseBrownCeramic Tile / Adhesive - Brown

- HA(8) Non-Fibrous

HomogenousFS7

Layer-1 Analyst: Teagan Murphy

Date Analyzed : 08/05/2026

PC Trace Chrysotile1914540

8B PC 100% OtherBeigePowdery Material

Non-Fibrous

HomogenousFS7

Layer-2 Analyst: Teagan Murphy

Date Analyzed : 08/05/2026

PLM None Detected 1914541

8C PLM 97% OtherPLM 3% CelluloseBrownCeramic Tile / Adhesive - Brown

- HA(8) Non-Fibrous

HomogenousFS7

Layer-1 Analyst: Teagan Murphy

Date Analyzed : 08/05/2026

PC 0.25% Chrysotile1914541

8C PC 99.75% OtherBeigePowdery Material

Non-Fibrous

HomogenousFS7

Layer-2 Analyst: Teagan Murphy

Date Analyzed : 08/05/2026

PLM None Detected 1914541

8C PLM 2% OtherPLM 98% CelluloseBeigeFibrous Material

Fibrous

HomogenousFS7

Layer-3 Analyst: Teagan Murphy

Date Analyzed : 08/05/2026

PLM None Detected 1914542

9A PLM 8% OtherPLM 92% Mineral woolWhiteCeiling / Tile - White - HA(9)

Fibrous

HomogenousFS10

Layer-1 Analyst: Teagan Murphy

Date Analyzed : 08/05/2026

ETL, Inc. maintains liability limited to cost of analysis. This report relates only to the samples reported and may not be reproduced without written approval by ETL, Inc. Test Method EPA 600/R-93-116 & EPA 600/M4-82/020 or NYSDOH-ELAP item 198.1 and/or 198.6 was used to analyze all samples. Matrix interference and/or resolution limits (i.e. detecting asbestos in non-friable organically bound materials) may yield false results in certain circumstances. Quantitative transmission electron microscopy (TEM) is currently the only method that can pronounce materials as non-asbestos containing. Interpretation and use of test results are the responsibility of the client. ETL, Inc. is not responsible for the accuracy of the results when requested to physically separate and analyze layered samples. Any

PLM results below 10% should be re-analyzed using the EPA recommended Point Count method. Any material that has greater than 1% asbestos content is considered to be an Asbestos Containing Material (ACM). These materials are regulated by both OSHA and the EPA and must be treated accordingly. Results are related to only to samples that were tested. An estimate of uncertainty can be provided at the client's request.

Polarized Light Microscopy Asbestos Analysis Report

Location :

To :

Romulus,MI 48174

Environmental Testing And Consulting Inc.

38900 Huron River Drive

14593 Burgess, Detroit, MI 48223

ETL Job :

Client Project :

293121

293121

Environmental Testing Laboratories, Inc.

37575 W Huron River Drive

Romulus, Michigan 48174

(734) 955-6600, Fax: (734) 955-6604

Sample Description Appearance % Fibrous % Non-Fibrous % Asbestos

07/31/2026

07/31/2026

Date Collected :

Date Received :

PLM None Detected 1914543

9B PLM 8% OtherPLM 92% Mineral woolWhiteCeiling / Tile - White - HA(9)

Fibrous

HomogenousFS10

Layer-1 Analyst: Teagan Murphy

Date Analyzed : 08/05/2026

PLM None Detected 1914544

9C PLM 8% OtherPLM 92% Mineral woolWhiteCeiling / Tile - White - HA(9)

Fibrous

HomogenousFS10

Layer-1 Analyst: Teagan Murphy

Date Analyzed : 08/05/2026

PLM None Detected 1914545

10A PLM 99% OtherPLM 1% CelluloseBrownCeiling / Glue Pod - Brown -

HA(10) Non-Fibrous

HomogenousFS10

Layer-1 Analyst: Teagan Murphy

Date Analyzed : 08/05/2026

PLM None Detected 1914546

10B PLM 99% OtherPLM 1% CelluloseBrownCeiling / Glue Pod - Brown -

HA(10) Non-Fibrous

HomogenousFS10

Layer-1 Analyst: Teagan Murphy

Date Analyzed : 08/05/2026

PLM None Detected 1914547

10C PLM 99% OtherPLM 1% CelluloseBrownCeiling / Glue Pod - Brown -

HA(10) Non-Fibrous

HomogenousFS10

Layer-1 Analyst: Teagan Murphy

Date Analyzed : 08/05/2026

PLM None Detected 1914548

11A PLM 100% OtherPLM Trace CelluloseGreyConcrete / Porch - Grey - HA(11)

Non-Fibrous

HomogenousEA1

Layer-1 Analyst: Chris Canilao

Date Analyzed : 08/05/2026

ETL, Inc. maintains liability limited to cost of analysis. This report relates only to the samples reported and may not be reproduced without written approval by ETL, Inc. Test Method EPA 600/R-93-116 & EPA 600/M4-82/020 or NYSDOH-ELAP item 198.1 and/or 198.6 was used to analyze all samples. Matrix interference and/or resolution limits (i.e. detecting asbestos in non-friable organically bound materials) may yield false results in certain circumstances. Quantitative transmission electron microscopy (TEM) is currently the only method that can pronounce materials as non-asbestos containing. Interpretation and use of test results are the responsibility of the client. ETL, Inc. is not responsible for the accuracy of the results when requested to physically separate and analyze layered samples. Any

PLM results below 10% should be re-analyzed using the EPA recommended Point Count method. Any material that has greater than 1% asbestos content is considered to be an Asbestos Containing Material (ACM). These materials are regulated by both OSHA and the EPA and must be treated accordingly. Results are related to only to samples that were tested. An estimate of uncertainty can be provided at the client's request.

Polarized Light Microscopy Asbestos Analysis Report

Location :

To :

Romulus,MI 48174

Environmental Testing And Consulting Inc.

38900 Huron River Drive

14593 Burgess, Detroit, MI 48223

ETL Job :

Client Project :

293121

293121

Environmental Testing Laboratories, Inc.

37575 W Huron River Drive

Romulus, Michigan 48174

(734) 955-6600, Fax: (734) 955-6604

Sample Description Appearance % Fibrous % Non-Fibrous % Asbestos

07/31/2026

07/31/2026

Date Collected :

Date Received :

PLM None Detected 1914549

11B PLM 100% OtherPLM Trace CelluloseGreyConcrete / Porch - Grey - HA(11)

Non-Fibrous

HomogenousEA1

Layer-1 Analyst: Chris Canilao

Date Analyzed : 08/05/2026

PLM None Detected 1914550

11C PLM 100% OtherPLM Trace CelluloseGreyConcrete / Porch - Grey - HA(11)

Non-Fibrous

HomogenousEA1

Layer-1 Analyst: Chris Canilao

Date Analyzed : 08/05/2026

PLM None Detected 1914551

12A PLM 100% OtherPLM Trace CelluloseGreyConcrete / Walkway - Grey -

HA(12) Non-Fibrous

HomogenousEA1

Layer-1 Analyst: Chris Canilao

Date Analyzed : 08/05/2026

PLM None Detected 1914552

12B PLM 100% OtherPLM Trace CelluloseGreyConcrete / Walkway - Grey -

HA(12) Non-Fibrous

HomogenousEA2

Layer-1 Analyst: Chris Canilao

Date Analyzed : 08/05/2026

PLM None Detected 1914553

12C PLM 100% OtherPLM Trace CelluloseGreyConcrete / Walkway - Grey -

HA(12) Non-Fibrous

HomogenousEA3

Layer-1 Analyst: Chris Canilao

Date Analyzed : 08/05/2026

PLM None Detected 1914554

13A PLM 100% OtherPLM Trace CelluloseGreyConcrete / Driveway - Grey -

HA(13) Non-Fibrous

HomogenousEA2

Layer-1 Analyst: Chris Canilao

Date Analyzed : 08/05/2026

ETL, Inc. maintains liability limited to cost of analysis. This report relates only to the samples reported and may not be reproduced without written approval by ETL, Inc. Test Method EPA 600/R-93-116 & EPA 600/M4-82/020 or NYSDOH-ELAP item 198.1 and/or 198.6 was used to analyze all samples. Matrix interference and/or resolution limits (i.e. detecting asbestos in non-friable organically bound materials) may yield false results in certain circumstances. Quantitative transmission electron microscopy (TEM) is currently the only method that can pronounce materials as non-asbestos containing. Interpretation and use of test results are the responsibility of the client. ETL, Inc. is not responsible for the accuracy of the results when requested to physically separate and analyze layered samples. Any

PLM results below 10% should be re-analyzed using the EPA recommended Point Count method. Any material that has greater than 1% asbestos content is considered to be an Asbestos Containing Material (ACM). These materials are regulated by both OSHA and the EPA and must be treated accordingly. Results are related to only to samples that were tested. An estimate of uncertainty can be provided at the client's request.

Polarized Light Microscopy Asbestos Analysis Report

Location :

To :

Romulus,MI 48174

Environmental Testing And Consulting Inc.

38900 Huron River Drive

14593 Burgess, Detroit, MI 48223

ETL Job :

Client Project :

293121

293121

Environmental Testing Laboratories, Inc.

37575 W Huron River Drive

Romulus, Michigan 48174

(734) 955-6600, Fax: (734) 955-6604

Sample Description Appearance % Fibrous % Non-Fibrous % Asbestos

07/31/2026

07/31/2026

Date Collected :

Date Received :

PLM None Detected 1914555

13B PLM 100% OtherPLM Trace CelluloseGreyConcrete / Driveway - Grey -

HA(13) Non-Fibrous

HomogenousEA2

Layer-1 Analyst: Chris Canilao

Date Analyzed : 08/05/2026

PLM None Detected 1914556

13C PLM 100% OtherPLM Trace CelluloseGreyConcrete / Driveway - Grey -

HA(13) Non-Fibrous

HomogenousEA2

Layer-1 Analyst: Chris Canilao

Date Analyzed : 08/05/2026

PLM 5% Chrysotile1914557

14A PLM 95% OtherPLM Trace CelluloseBeigeTransite / Siding - Beige -

HA(14) Non-Fibrous

HomogenousEA1

Layer-1 Analyst: Ben Jones

Date Analyzed : 08/05/2026

1914558

14B

Positive Stop

EA2

Analyst: Ben Jones

Date Analyzed : 08/05/2026

Sample Not Analyzed

1914559

14C

Positive Stop

EA3

Analyst: Ben Jones

Date Analyzed : 08/05/2026

Sample Not Analyzed

PLM None Detected 1914560

15A PLM 8% OtherPLM 92% CelluloseBlackTransite Seam-Tape - Black -

HA(15) Fibrous

HomogenousEA1

Layer-1 Analyst: Ben Jones

Date Analyzed : 08/05/2026

ETL, Inc. maintains liability limited to cost of analysis. This report relates only to the samples reported and may not be reproduced without written approval by ETL, Inc. Test Method EPA 600/R-93-116 & EPA 600/M4-82/020 or NYSDOH-ELAP item 198.1 and/or 198.6 was used to analyze all samples. Matrix interference and/or resolution limits (i.e. detecting asbestos in non-friable organically bound materials) may yield false results in certain circumstances. Quantitative transmission electron microscopy (TEM) is currently the only method that can pronounce materials as non-asbestos containing. Interpretation and use of test results are the responsibility of the client. ETL, Inc. is not responsible for the accuracy of the results when requested to physically separate and analyze layered samples. Any

PLM results below 10% should be re-analyzed using the EPA recommended Point Count method. Any material that has greater than 1% asbestos content is considered to be an Asbestos Containing Material (ACM). These materials are regulated by both OSHA and the EPA and must be treated accordingly. Results are related to only to samples that were tested. An estimate of uncertainty can be provided at the client's request.

Polarized Light Microscopy Asbestos Analysis Report

Location :

To :

Romulus,MI 48174

Environmental Testing And Consulting Inc.

38900 Huron River Drive

14593 Burgess, Detroit, MI 48223

ETL Job :

Client Project :

293121

293121

Environmental Testing Laboratories, Inc.

37575 W Huron River Drive

Romulus, Michigan 48174

(734) 955-6600, Fax: (734) 955-6604

Sample Description Appearance % Fibrous % Non-Fibrous % Asbestos

07/31/2026

07/31/2026

Date Collected :

Date Received :

PLM None Detected 1914561

15B PLM 8% OtherPLM 92% CelluloseBlackTransite Seam-Tape - Black -

HA(15) Fibrous

HomogenousEA2

Layer-1 Analyst: Ben Jones

Date Analyzed : 08/05/2026

PLM None Detected 1914562

15C PLM 8% OtherPLM 92% CelluloseBlackTransite Seam-Tape - Black -

HA(15) Fibrous

HomogenousEA3

Layer-1 Analyst: Ben Jones

Date Analyzed : 08/05/2026

PLM None Detected 1914563

16A PLM 9% OtherPLM 91% CelluloseBlackWall (Ext.) / Vapor Barrier -

Black - HA(16) Fibrous

HomogenousEA1

Layer-1 Analyst: Ben Jones

Date Analyzed : 08/05/2026

PLM None Detected 1914564

16B PLM 9% OtherPLM 91% CelluloseBlackWall (Ext.) / Vapor Barrier -

Black - HA(16) Fibrous

HomogenousEA2

Layer-1 Analyst: Ben Jones

Date Analyzed : 08/05/2026

PLM None Detected 1914565

16C PLM 9% OtherPLM 91% CelluloseBlackWall (Ext.) / Vapor Barrier -

Black - HA(16) Fibrous

HomogenousEA3

Layer-1 Analyst: Ben Jones

Date Analyzed : 08/05/2026

PLM None Detected 1914566

17A PLM 100% OtherGreyConcrete / Wall - Grey - HA(17)

Non-Fibrous

HomogenousEA1

Layer-1 Analyst: Tia Ray

Date Analyzed : 08/05/2026

ETL, Inc. maintains liability limited to cost of analysis. This report relates only to the samples reported and may not be reproduced without written approval by ETL, Inc. Test Method EPA 600/R-93-116 & EPA 600/M4-82/020 or NYSDOH-ELAP item 198.1 and/or 198.6 was used to analyze all samples. Matrix interference and/or resolution limits (i.e. detecting asbestos in non-friable organically bound materials) may yield false results in certain circumstances. Quantitative transmission electron microscopy (TEM) is currently the only method that can pronounce materials as non-asbestos containing. Interpretation and use of test results are the responsibility of the client. ETL, Inc. is not responsible for the accuracy of the results when requested to physically separate and analyze layered samples. Any

PLM results below 10% should be re-analyzed using the EPA recommended Point Count method. Any material that has greater than 1% asbestos content is considered to be an Asbestos Containing Material (ACM). These materials are regulated by both OSHA and the EPA and must be treated accordingly. Results are related to only to samples that were tested. An estimate of uncertainty can be provided at the client's request.

Polarized Light Microscopy Asbestos Analysis Report

Location :

To :

Romulus,MI 48174

Environmental Testing And Consulting Inc.

38900 Huron River Drive

14593 Burgess, Detroit, MI 48223

ETL Job :

Client Project :

293121

293121

Environmental Testing Laboratories, Inc.

37575 W Huron River Drive

Romulus, Michigan 48174

(734) 955-6600, Fax: (734) 955-6604

Sample Description Appearance % Fibrous % Non-Fibrous % Asbestos

07/31/2026

07/31/2026

Date Collected :

Date Received :

PLM None Detected 1914567

17B PLM 100% OtherGreyConcrete / Wall - Grey - HA(17)

Non-Fibrous

HomogenousEA2

Layer-1 Analyst: Tia Ray

Date Analyzed : 08/05/2026

PLM None Detected 1914568

17C PLM 100% OtherGreyConcrete / Wall - Grey - HA(17)

Non-Fibrous

HomogenousEA3

Layer-1 Analyst: Tia Ray

Date Analyzed : 08/05/2026

PLM None Detected 1914569

18A PLM 100% OtherGreyWall (Ext.) / Brick - Grey -

HA(18) Non-Fibrous

HomogenousEA1

Layer-1 Analyst: Tia Ray

Date Analyzed : 08/05/2026

PLM None Detected 1914569

18A PLM 97% OtherPLM 3% CelluloseTanAdhesive

Non-Fibrous

HomogenousEA1

Layer-2 Analyst: Tia Ray

Date Analyzed : 08/05/2026

PLM None Detected 1914570

18B PLM 100% OtherGreyWall (Ext.) / Brick - Grey -

HA(18) Non-Fibrous

HomogenousEA1

Layer-1 Analyst: Tia Ray

Date Analyzed : 08/05/2026

PLM None Detected 1914570

18B PLM 98% OtherPLM 2% CelluloseTanAdhesive

Non-Fibrous

HomogenousEA1

Layer-2 Analyst: Tia Ray

Date Analyzed : 08/05/2026

ETL, Inc. maintains liability limited to cost of analysis. This report relates only to the samples reported and may not be reproduced without written approval by ETL, Inc. Test Method EPA 600/R-93-116 & EPA 600/M4-82/020 or NYSDOH-ELAP item 198.1 and/or 198.6 was used to analyze all samples. Matrix interference and/or resolution limits (i.e. detecting asbestos in non-friable organically bound materials) may yield false results in certain circumstances. Quantitative transmission electron microscopy (TEM) is currently the only method that can pronounce materials as non-asbestos containing. Interpretation and use of test results are the responsibility of the client. ETL, Inc. is not responsible for the accuracy of the results when requested to physically separate and analyze layered samples. Any

PLM results below 10% should be re-analyzed using the EPA recommended Point Count method. Any material that has greater than 1% asbestos content is considered to be an Asbestos Containing Material (ACM). These materials are regulated by both OSHA and the EPA and must be treated accordingly. Results are related to only to samples that were tested. An estimate of uncertainty can be provided at the client's request.

Polarized Light Microscopy Asbestos Analysis Report

Location :

To :

Romulus,MI 48174

Environmental Testing And Consulting Inc.

38900 Huron River Drive

14593 Burgess, Detroit, MI 48223

ETL Job :

Client Project :

293121

293121

Environmental Testing…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated .