140R6024R0017_Norman_Fire_Break.pdf

U.S. Department of the Interior Bureau of Reclamation Missouri Basin and Arkansas-Rio Grande-Texas Gulf Regions Billings, Montana August 2024

Request for Proposal Solicitation No. 140R6024R0017

Norman Fire Break Clearing and Fencing

Lake Thunderbird State Park Norman Project, Oklahoma

Forward – 1

Norman Fire Break Clearing and Fencing

FORWARD

Work is located at Lake Thunderbird. Lake Thunderbird is approximately 15 miles east of Norman on S.H. 9 in Cleveland County, Oklahoma.

Principle components of work include: (1) Surveying; (2) Demolition of existing fencing; (3) Mechanically clearing firebreak; (4) Constructing new 5-strand barbed wire fence; (5) Constructing steel corner posts and H-braces; (6) Constructing steel post and cable fencing.

POINT OF CONTACT – The Contract Specialist for this requirement is Mr. Howard Heflin.

All questions and correspondence concerning this solicitation shall be directed to him via email at hheflin@usbr.gov.

METHOD OF PROCUREMENT – This requirement is solicited as a Request for Proposal (RFP) using the Federal Acquisition Regulation (FAR) subpart 19.8 – Contracting with the Small Business Administration (The 8(a) Program), and FAR part 15 – Contracting by Negotiation.

ORGANIZED SITE VISIT – An organized site visit shall be coordinated with the Contracting Officer Representative (COR), Cody McCrackin at (405) 470-4824 or cmccrackin@usbr.gov.

RECLAMATION SAFETY AND HEALTH STANDARDS (2014 EDITION) – For information regarding Bureau of Reclamation’s publication “Reclamation Safety and Health Standards” (revised in June 2024 unless a later date is noted, at https://www.usbr.gov/safety/rshs/index.html) which is applicable to work under this contract, see clause at “WBR 1452.223-81 – Safety and Health”.

SYSTEM FOR AWARD MANAGEMENT (SAM) – Effective October 2018, all contractors interested in doing business with the Federal Government must be registered in the System for Award Management (SAM) database at the time they submit their offer. Note: Registering in SAM does not constitute an automatic award of any contract or agreement to the registering contractor. SAM is a centralized database for consolidating the Central Contractor Registration (CCR), the Online Representation and Certifications Application (ORCA), and the Excluded Parties List System (EPLS).

Additionally, the contractor’s business and financial information are required for SAM registration and annual confirmation requirements, which must be accomplished through the SAM website at https://sam.gov/. For assistance with registering in SAM, contact the Federal Services Desk at 1-866-606-8220.

mailto:hheflin@usbr.gov mailto:cmccrackin@usbr.gov https://www.usbr.gov/safety/rshs/index.html https://sam.gov/

Forward – 2

INVOICE PROCESSING PLATFORM (IPP) – Payment requests for the anticipated contract or agreement must be submitted electronically through the U.S. Department of Treasury’s “Invoice Processing Platform” (IPP) System via the IPP website at https://www.ipp.gov.

Contractors are required to use the IPP website to access and use IPP for submitting request for payment. Registration assistance can be obtained by contacting the “IPP Production Helpdesk” via email ippgroup@bos.fbr.org or phone 1-866-973-3131. If the contractor is unable to comply with the requirement to use IPP for submitting invoices for payment, the contractor can submit a waiver request in writing to the Contractor Officer with its proposal.

Note: Waivers will be on a case-by-case basis and not automatically granted as determined by the Contract Officer. Please see Paragraph G.3, DOI-AAAP-0028 for more specific information on the process for submitting invoices in IPP.

END OF FORWARD

https://www.ipp.gov/ mailto:ippgroup@bos.fbr.org

Table of Contents

00 01 10 - 1

TABLE OF CONTENTS

PART I – THE SCHEDULE

SECTION A – SOLICITATION, OFFER, AND AWARD: STANDARD FORM 1442

SECTION B – PRICE SCHEDULE

SECTION C – DESCRIPTION / SPECIFICATIONS

DIVISION 01 - GENERAL REQUIREMENTS

01 11 00 Summary of Work 01 14 12 Work Restrictions 01 31 19 Project Management and Coordination 01 33 00 Submittals 01 35 10 Safety Data Sheets 01 35 20 Safety and Health 01 35 30 Contractor’s Onsite Safety Personnel 01 42 10 Reference Standards 01 46 00 Quality Procedures 01 51 00 Temporary Utilities 01 55 20 Traffic Control 01 56 10 Protection of Existing Installations 01 56 15 Protection of Existing Utilities 01 56 20 Demolition of Existing Fences 01 57 20 Environmental Controls 01 57 30 Water Pollution Control 01 60 00 Product Requirements 01 71 20 Surveying

DIVISION 31 - EARTHWORK

31 11 00 Clearing

DIVISION 32 - EXTERIOR IMPROVEMENTS

32 31 30 Fencing and Gates

DIVISION 51 - INFORMATION AVAILABLE TO OFFERORS

51 00 00 Information Available to Offerors 51 01 71 United States Boundary Information

DIVISION 52 - DRAWINGS

52 00 00 Drawings

00 01 10 - 2

SECTION D – NOT USED

SECTION E – INSPECTION AND ACCEPTANCE

E.1 52.246-12 Inspection of Construction

SECTION F – DELIVERIES OR PERFORMANCE

F.1 52.211-10 Commencement, Prosecution, and Completion of Work F.2 52.211-18 Variation in Estimated Quantity F.3 52.236-15 Schedules for Construction Contracts F.4 52.242-14 Suspension of Work

SECTION G – CONTRACT ADMINISTRATION DATA

G.1 1452.201-70 Authorities and Delegations G.2 WBR 1452.201-80 Contracting Officer’s Representative’s Authorities and Limitations G.3 DOI-AAAP 0028 Electronic Invoicing and Payment Requirements – Invoice

Processing Platform (IPP) G.4 DOI-AAAP 0050 Notice to Contractors – Contractor Performance Assessment

Reporting System

SECTION H – SPECIAL CONTRACT REQUIREMENTS

H.1 MB-1 Schedule of Values

PART II – CONTRACT CLAUSES

SECTION I – CONTRACT CLAUSES

I.1 52.252-2 Clauses Incorporated by Reference I.2 52.204-21 Basic Safeguarding of Covered Contractor Information Systems I.3 52.215-8 Order of Precedence – Uniform Contract Format I.4 52.219-14 Limitations on Subcontracting I.5 52.219-17 Section 8(a) Award I.6 52.219-28 Post-Award Small Business Program Rerepresentation I.7 52.222-23 Notice or Requirement for Affirmative Action to Ensure Equal

Employment Opportunity for Construction I.8 52.223-3 ALT I Hazardous Material Identification and Material Safety Data –

Alternate I I.9 52.225-9 Buy American–Construction Materials I.10 52.228-2 Additional Bond Security I.11 52.228-15 Performance and Payment Bonds – Construction I.12 52.232-5 Payments Under Fixed-Price Construction Contracts I.13 52.232-27 Prompt Payment for Construction Contracts I.14 52.232-40 Providing Accelerated Payments to Small Business Subcontractors I.15 52.236-2 Differing Site Conditions I.16 52.236-13 Accident Prevention

00 01 10 - 3

I.17 52.236-21 Specifications and Drawings for Construction I.18 52.243-4 Changes I.19 52.246-21 Warranty of Construction I.20 52.252-6 Authorized Deviations in Clauses I.21 1452.203-70 Restriction on Endorsements – Department of the Interior I.22 1452.204-70 Release of Claims – Department of the Interior I.23 WBR 1452.209-82 Prohibition on Release of Information – Bureau of Reclamation I.24 1452.215-70 Examination of Records by the Department of the Interior I.25 WBR 1452.219-81 Section 8(a) Direct Award – Bureau of Reclamation I.26 WBR 1452.223-80 Asbestos-Free Warranty – Bureau of Reclamation I.27 WBR 1452.223-81 Safety and Health – Bureau of Reclamation I.28 WBR 1452.223-82 Ensuring Adequate COVID-19 Safety Protocols in Federal

Buildings and Federally Controlled Facilities – Bureau of Reclamation

I.29 1452.228-70 Liability Insurance – Department of the Interior I.30 WBR 1452.232-81 Payment for Mobilization and Preparatory Work – Bureau of Reclamation I.31 WBR 1452.236-84 Preservation of Cultural Resources – Bureau of Reclamation I.32 WBR 1452.237-80 Security Requirements – Bureau of Reclamation – Alternate III

ALT III

I.33 WBR 1452.242-80 Postaward Conference – Bureau of Reclamation I.34 WBR 1452.243-80 Modification Proposals – Bureau of Reclamation – Alternate II

ALT II

PART III – DOCUMENTS, EXHIBITS, AND OTHER ATTACHMENTS

SECTION J – LIST OF DOCUMENTS, EXHIBITS, AND OTHER ATTACHMENTS

Attachment No. 0001…………………………………...General Decision Number OK20240029 Attachment No. 0002……………………………………………...Standard Form 24 – Bid Bond

PART IV – REPRESENTATIONS AND CERTIFICATIONS

SECTION K – REPRESENTATIONS, CERTIFICATIONS, AND OTHER

STATEMENTS OF OFFERORS

K.1 52.204-8 Annual Representations and Certifications K.2 52.204-24 Representation Regarding Certain Telecommunications and Video

Surveillance Services or Equipment K.3 52.209-7 Information Regarding Responsibility Matters K.4 52.209-13 Violation of Arms Control Treaties or Agreements-Certification

SECTION L – INSTRUCTIONS, CONDITIONS, AND NOTICES TO OFFERORS

L.1 52.204-7 System for Award Management L.2 52.204-16 Commercial and Government Entity Code Reporting L.3 52.204-22 Alternative Line Item Proposal

00 01 10 - 4

L.4 52.211-1 Availability of Specifications Listed in the GSA Index of Federal Specifications, Standards and Commercial Item Descriptions, FPMR Part 101-29

L.5 52.211-2 Availability of Defense Specifications, Standards and Data Item Descriptions Listed in the Acquisition Streamlining and Standardization Information System (ASSIST)

L.6 52.214-34 Submission of Offers in the English Language L.7 52.214-35 Submission of Offers in U.S. Currency L.8 52.216-1 Type of Contract L.9 52.222-5 Construction Wage Rate Requirements – Secondary Site of the

Work L.10 52.225-10 Notice of Buy American Requirement – Construction Materials L.11 52.228-1 Bid Guarantee L.12 52.228-17 Individual Surety – Pledge of Assets (Bid Guarantee) L.13 1452.233-2 Service of Protest – Department of the Interior (DEVIATION) L.14 52.236-27 Site Visit (Construction) L.15 52.236-28 Preparation of Proposals – Construction L.16 52.252-1 Solicitation Provisions Incorporated by Reference L.17 52.252-5 Authorized Deviations in Provisions L.18 1452.215-71 Use and Disclosure of Proposal Information – Department of the

Interior L.19 WBR 1452.215-81 Proposal Instructions – Bureau of Reclamation L.20 WBR 1452.236-85 Instruction for Mobilization and Preparatory Work Schedule Line

Item – Bureau of Reclamation

SECTION M – EVALUATION FACTORS FOR AWARD

M.1 WBR 1452.215-80 Source Selection Evaluation Procedures – Bureau of Reclamation M.2 WBR 1452.215-85 Evaluation Factors for Award – Lowest Price Technically Acceptable Source Selection Process – Bureau of Reclamation

END OF CONTENTS

SECTION A

SOLICITATION, OFFER, AND AWARD

(STANDARD FORM 1442)

SOLICITATION, OFFER,

AND AWARD

2. TYPE OF SOLICITATION

6. PROJECT NO. 4. CONTRACT NO. 5. REQUISITION/PURCHASE REQUEST NO.

PAGE OF PAGES

7. ISSUED BY CODE 8. ADDRESS OFFER TO

SOLICITATION

(Construction, Alteration, or Repair)

1. SOLICITATION NO. 3. DATE ISSUED

IMPORTANT -- The "offer" section on the reverse must be fully completed by offeror.

9.

INFORMATION CALL

a. NAME b. TELEPHONE NO. (Include area code) (NO COLLECT CALLS)

NOTE: In sealed bid solicitations "offer" and "offeror" mean "bid" and "bidder."

FOR

SEALED BID (IFB)

NEGOTIATED (RFP)

0040654703

Bureau of Reclamation

Missouri Basin Region

Regional Office 2021 4th Avenue North

R60

Billings MT 59101

Bureau of Reclamation

Attn: MB-5000 / Howard Heflin

2021 4th Avenue North Billings MT 59101

Howard Heflin 4062477797

1x 08/30/2024

140R6024R0017

INVITATION FOR BID

REQUEST FOR PROPOSAL

10. THE GOVERNMENT REQUIRES PERFORMANCE OF THE WORK DESCRIBED IN THESE DOCUMENTS (Title, identifying no., date)

Norman Fire Break Clearing and Fencing, Lake Thunderbird State Park, Norman Project, Oklahoma

The magnitude of this project is between $250,000 and $500,000.

The North American Industry Classification System (NAICS) code is: 115310 Exception 2 - Fuels Management Services.

The Small Business Size Standard is: $34 Million.

The Product Service Code (PSC) is: F003 - Fire Suppression/Presuppression.

This solicitation is conducted under the authority of 41 U.S.C. 3304(a)(5) for use of other than full and open competition. This authority authorizes a sole source award under the 8(a) Program.

Proposal is to be submitted via email to hheflin@usbr.gov and camaurer@usbr.gov.

Reclamation's email servers limits attachments to 25 MB per email. Therefore, the offeror may need to submit multiple emails to ensure the Contract Specialist and Contracting Officer receive the complete proposal (Volumes 1-3).

The Offeror shall fill out the following:

Taxpayer Identification Number (TIN): _______________

System for Award Management (SAM) Unique Entity Identification (UEI): ______________

Commercial and Government Entity Code (CAGE): _______________

11. The Contractor shall begin performance within

12a. THE CONTRACTOR MUST FURNISH ANY REQUIRED PERFORMANCE AND PAYMENT BONDS?

award, notice to proceed. The performance period is mandatory negotiable. (See ________________________________________________.)

13. ADDITIONAL SOLICITATION REQUIREMENTS:

a. Sealed offers in original and is not required.is, b. An offer guarantee

c. All offers are subject to the (1) work requirements, and (2) other provisions and clauses incorporated in the solicitation in full text or by reference.

(date). If this is a sealed bid solicitation, offers will be publicly opened at that time. Sealed envelopes containing offers shall be marked to show the offeror's name and address, the solicitation number, and the date and time offers are due.

d. Offers providing less than

12b. CALENDAR DAYSYES NO

(If "YES", indicate within how many calendar days after award in Item 12b.)

10 250 calendar days and complete it within ________________ ________________ calendar days after receiving

Paragraph F.1.

09/13/2024

NSN 7540-01-155-3212

x x x x copies to perform the work required are due at the place specified in Item 8 by _____________ ___________________ (hour) local time calendar days for Government acceptance after the date offers are due will not be considered and will be rejected . _________________

STANDARD FORM 1442 (Rev. 12/2022)

Prescribed by GSA

FAR(48 CFR) 53.236-1(d)

17. The offeror agrees to perform the work required at the prices specified below in strict accordance with the terms of this solicitation, if this offer is accepted by the Government in writing within ____________________ calendar days after the date offers are due. (Insert any number equal to or greater than the minimum requirement stated in item 13d. Failure to insert any number means the offeror accepts the minimum in item 13d.)

14. NAME AND ADDRESS OF OFFEROR (Include ZIP Code) 15. TELEPHONE NO. (Include area code)

16. REMITTANCE ADDRESS (Include only if different than item 14.)

CODE FACILITY CODE

AMOUNTS

18. The offeror agrees to furnish any required performance and payment bonds.

19. ACKNOWLEDGEMENT OF AMENDMENTS

OFFER (Must be fully completed by offeror)

(The offeror acknowledges receipt of amendments to the solicitation -- give number and date of each)

AMENDMENT NO.

DATE.

20a. NAME AND TITLE OF PERSON AUTHORIZED TO SIGN OFFER (Type or print) 20b. SIGNATURE 20c. OFFER DATE

AWARD (To be completed by Government)

21. ITEMS ACCEPTED:

22. AMOUNT 23. ACCOUNTING AND APPROPRIATION DATA

24. SUBMIT INVOICES TO ADDRESS SHOWN IN

(4 copies unless otherwise specified)

ITEM 25. OTHER THAN FULL AND OPEN COMPETITION PURSUANT TO THE UNITED STATES CODE AT

26. ADMINISTERED BY CODE 27. PAYMENT WILL BE MADE BY

CONTRACTING OFFICER WILL COMPLETE ITEM 28 OR 29 AS APPLICABLE

(Contractor is required to sign this document solicitation is hereby accepted as to the items listed. This award consummates the contract, which consists of (a) the Government solicitation and your offer, and (b) this contract award. No further contractual document is necessary.

30a. NAME AND TITLE OF CONTRACTOR OR PERSON AUTHORIZED TO SIGN (Type or print) 31a. NAME OF CONTRACTING OFFICER (Type or print)

30b. SIGNATURE 30c. DATE 31b. UNITED STATES OF AMERICA 31c. DATE

BY

2PAGE OF

Bureau of Reclamation Missouri Basin Region

Regional Office 2021 4th Avenue North

R60

Billings MT 59101

Charlene Maurer

28. NEGOTIATED AGREEMENT 29. AWARD

and deliver all items or perform all work requirements identified on this form and any continuation sheets for the consideration stated in this contract. The rights and obligations of the parties to this contract shall be governed by (a) this contract award, (b) the solicitation, and (c) the clauses, representations,certifications, and specifications incorporated by reference in or attached to this contract.

copies to issuing office.) Contractor agrees to furnish

10 U.S.C. 3204(a) 41 U.S.C. 3304(a)

STANDARD FORM 1442 (REV. 12/2022) BACK

and return

(Contractor is not required to sign this document.) Your offer on this

Invoice Processing Platform System US Department of Treasury https://www.ipp.gov

Paragraph G.3 X 5

ITEM NO.

(A)

SUPPLIES/SERVICES

(B)

QUANTITY

(C)

UNIT

(D)

UNIT PRICE

(E)

AMOUNT

(F)

NAME OF OFFEROR OR CONTRACTOR

3 3

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

140R6024R0017

00010 1 AU $______________Norman Fire Break Clearing and Fencing

Product/Service Code: F003

Product/Service Description: NATURAL

RESOURCES/CONSERVATION- FOREST-RANGE FIRE

SUPPRESSION/PRESUPPRESSION

NSN 7540-01-152-8067 OPTIONAL FORM 336 (4-86)

Sponsored by GSA

FAR (48 CFR) 53.110

SECTION B

THE SCHEDULE

Norman Project, Oklahoma .

Price Schedule B-1

SECTION B - SUPPLIES OR SERVICES AND PRICES / COSTS

B.1 PRICE SCHEDULE

(a) Offers will be considered for award on the following Price Schedule, but no offer will be considered for award on only part of the Price Schedule.

(b) Offers are subject to the terms and conditions of this solicitation.

(c) Quantities in the Price Schedule are estimated quantities for comparison of offers only.

Except as provided in the contract clause at FAR 52.211-18, Variation in Estimated Quantity, no claim shall be made against Government for overruns or underruns. The contract clause at FAR 52.211-18, Variation in Estimated Quantity does not apply to lump sum items.

(d) See the contract clause at WBR 1452.232-81, Payment for Mobilization and Preparatory Work, for CLIN 1.

(e) Definitions:

(1) CLIN - Contract Line Item Number.

Schedule A – Fire Break Clearing and Fencing

CLIN Section Supplies or Services Quantity and Unit

Unit Price Amount

1 WBR

1452.232-

Mobilization and Preparatory work

For the lump sum of

2 01 71 20 Surveying

For the lump sum of

3 01 56 20 Demolition of Existing Fencing

9,875 LF $ $

4 31 11 00 Mechanical Clearing 20 feet wide (Adjacent to Private Property)

11,760 LF $ $

Price Schedule B-2

5 31 11 00 Mechanical Firebreak Restoration 10 feet wide

11,760 LF $ $

6 32 31 30 5- Strand Barbed Wire Fence 8,475 LF $ $

32 31 30 2-Rail H-Brace 8 EA $ $

32 31 30 3-Rail Corner Post 8 EA $ $

9 32 31 30 Walk-Thru Gate 8 EA $ $

10 32 31 30 Steel Post and Cable Fencing 8,475 LF $ $

TOTAL FOR SCHEDULE A $

END OF SUPPLIES OR SERVICES AND PRICES / COSTS

SECTION C

DESCRIPTION / SPECIFICATIONS

Summary of Work

01 11 00 - 1

SECTION 01 11 00

SUMMARY OF WORK

PART 1 GENERAL

1.01 LOCATION

A. Work required under this contract is located on the south and north sides of Lake

Thunderbird. The reservoir is located east of Norman, Oklahoma on S.H. 9 in Cleveland

County, Oklahoma.

1.02 PRINCIPAL COMPONENTS OF WORK

A. Property boundary surveying.

B. Construct new 5-strand barbed wire fence including T-posts, corner posts, and H-braces.

Clearing areas as necessary to construct new fencing.

C. Construct steel post and cable fencing at designated locations. Clearing areas as necessary to construct new fencing.

D. Locations of features on the drawings are approximate. Exact locations of items to be constructed or installed shall be approved by COR once surveying and clearing work has been completed.

1.03 SPECIFICATIONS REQUIREMENTS

A. Requirements in Division 1, General Requirements, apply to Divisions 2 through 52.

B. Imperative statements in these specifications are Contractor requirements, unless otherwise stated.

C. Where specifications are written in streamlined form, the words “shall be” are included by inference where a colon (:) is used within the sentence or phrase.

1.04 DEFINITIONS

A. When the specifications use a word or term defined in the Federal Acquisition

Regulations (FAR), the definition of the word or term shall be in accordance with FAR sections in effect at the time the solicitation was issued.

1.05 ACRONYMS

A. The following acronyms apply to specifications Divisions 1 through 52:

1. CO: Contracting Officer

Summary of Work

01 11 00 - 2

2. COR: Contracting Officer’s Representative

PART 2 PRODUCTS

Not Used

PART 3 EXECUTION

Not Used

4.03 CONSTRUCTION COMPLETION

A. Construction period is 250 calendar days from the receipt of the Notice to Proceed, for all work. No work is to be performed on weekends or Federal holidays.

END OF SECTION

Norman Project, Oklahoma Solicitation No.

Work Restrictions

01 14 12 - 1

SECTION 01 14 12

WORK RESTRICTIONS

PART 1 GENERAL

1.01 MEASUREMENT AND PAYMENT

A. Cost:

1. Include in prices offered in the Price Schedule for other items of work.

1.02 WORK RESTRICTIONS

A. Work hours:

1. Monday through Friday, 7 am to 7 pm.

2. Additional hours per COR approval. Request in writing and be approved 7 days in advance.

3. Additional days per COR approval. Request in writing and be approved 21 days in advance.

B. Allow public access to Lake Thunderbird State Park throughout construction.

1. Includes use of public roads and campground areas.

2. Maintain public use of all roadways and access to and from campgrounds during construction.

C. All work performed under this contract is accessible via public roads or Federal lands.

D. Contractor shall allow Reclamation 90 days to review the completed boundary survey prior to clearing areas requiring survey. Contractor shall not begin clearing, demolition or fencing areas requiring survey prior to receiving written approval of the survey by

Reclamation.

PART 2 PRODUCTS

Not Used

PART 3 EXECUTION

Project Management and Coordination

01 31 19 - 1

SECTION 01 31 19

PROJECT MANAGEMENT AND COORDINATION

PART 1 GENERAL

1.01 MEASUREMENT AND PAYMENT

A. Cost:

1. Include in the prices offered in the Price Schedule for other items of work.

1.02 REFERENCE STANDARDS

A. Bureau of Reclamation (USBR)

1. RSHS Reclamation Safety and Health Standards, including revisions posted at http://www.usbr.gov/ssle/safety/RSHS/rshs.

html

1.03 SUBMITTALS

A. Submit the following in accordance with Section 01 33 00 - Submittals.

B. RSN 01 31 19-1, Work Plan Summary.

1. Summary of upcoming work and traffic plans for next 60 days.

PART 2 PRODUCTS

Not Used

PART 3 EXECUTION

3.01 PROJECT COORDINATION

A. The following meetings are considered significant, but do not relieve Contractor from the responsibility of other meetings required outside this section.

B. Schedule Update Joint Review Meeting:

1. Meet weekly with COR to review work, progress made, difficulties in performing work, and resolution necessary to meet specifications requirements.

2. Meetings include review of construction program work and updating of progress reports.

Project Management and Coordination

01 31 19 - 2

C. Work Plan Summary:

1. Prepare written monthly summary of work plans. Provide summary to COR at least 7 days before the start of the month

D. After survey and clearing has been completed, Contractor shall stake locations for new fencing, H-Braces, Corner Braces, Gates, Pipe Rail Fencing, and Post and Cable Fencing in accordance with Section 32 31 30 – Barbed Wire Fencing, Steel Post and Cable

Fencing, and Gates. Once staking is complete, Contractor shall contact COR a minimum of seven days prior to starting fence construction to schedule an on-site meeting to review all fence locations. Contractor shall not construct new fencing prior to receiving written approval from COR.

3.02 STAGING AREAS

A. Contractor may store materials and equipment within cleared firebreaks. Other unsecured staging areas may be available upon request to COR.

B. United States shall not be liable for damage to or theft of contractor materials or equipment.

Submittals

01 33 00 - 1

SECTION 01 33 00

SUBMITTALS

PART 1 GENERAL

1.01 MEASUREMENT AND PAYMENT

A. Cost:

1. Include in prices offered in the Price Schedule for other items of work.

1.02 REFERENCE STANDARDS

A. American Society of Mechanical Engineers (ASME)

1. ASME Y14.1-12 Decimal Inch Drawing Sheet Size and

Format

B. National Institute of Building Sciences (NIBS)

1. NIBS NCS-14 United States National CAD Standards, Version 6

1.03 DEFINITIONS

A. Days: Calendar days.

B. Required Submittal Number (RSN): Identifies items to be submitted together as a complete submittal.

1.04 SUBMITTAL REQUIREMENTS

A. In case of conflict between requirements of this section and requirements included elsewhere in these specifications, requirements included elsewhere take precedence.

B. General:

1. Prepare in English.

2. Label with contract number and title, and RSN.

3. Measurement Units: US Customary Units.

C. Samples Submittals:

1. Label with complete manufacturer’s product and color identification.

2. Include type and quantity of materials specified in the referenced section in each

“set” of samples.

3. Samples: Representative of product to be installed.

01 33 00 - 2

4. Label each sample, sample kit with contract number and title.

D. Product Data:

1. Mark manufacturer's data for commercial products or equipment, such as catalog cut sheets.

a. Identify manufacturer's name, type, model, size, and characteristics.

b. Illustrate that product or equipment meets requirements of specifications.

c. Mark items to be furnished in a manner that will photocopy (no highlighter).

d. Strike through items that do not apply.

E. Certifications:

1. Certifications by a registered professional: Signed and sealed by registered professional.

2. Manufacturer’s certifications: Signed by authorized representative of manufacturer.

F. Manuals:

1. Copies:

a. Printed copies: Bound and indexed.

b. Electronic copies: Adobe pdf on CD or DVD discs.

1) Bookmark longer files to assist in navigating file.

2. Contents:

a. Parts identification lists, lists of special tools, and accessories.

b. Schematics and wiring diagrams.

c. Detailed instructions for installing, operating, lubricating, and maintaining equipment.

d. As-built drawings, photographs, and test records or reports if required by the specifications.

G. Samples and Color Selection Submittals:

1. Label with complete manufacturer's product and color identification.

2. Include type and quantity of materials specified in the referenced section in each

“set” of samples.

3. Samples: Representative of product to be installed. Xerographic sheets for color selection are not acceptable.

4. Color Chips: Sample paint chips. Ink color reproductions are not acceptable.

01 33 00 - 3

5. Label each sample, sample kit, set of color chips, or color chart with contract number and title.

6. The Government will select architectural color and pattern after product approval.

1.05 SUBMITTALS PROCEDURES

A. Submit only checked submittals. Submittals without evidence of Contractor's approval will be returned for resubmission.

B. Submit complete sets of required materials for each RSN as specified in “Submittals Required” column in Table 01 33 00A - List of Submittals. A complete set includes all listed items for RSNs with multiple parts.

C. Submit number of sets specified in “Sets to be sent to:” columns in Table 01 33 00A - List of Submittals.

1. Electronic submittals:

a. In Portable Document Format (.pdf).

b. Include RSN transmittal letter.

c. Do not include Personally Identifiable Information (PII) in electronic submittals.

d. Submittal method (size based):

1) Government can receive e-mails up to 10 MB. Receipt of e-mails exceeding 10 MB (extra-large) may be possible. E-mailing of extra-large electronic submittals may occur only after size limit for transmittal of extra-large email has been verified.

2) Electronic media for submittals too large for e-mail: CD or DVD.

D. Include the following information in transmittal letters:

1. Contract number and title.

2. RSN for each attached submittal.

3. Responsible code.

4. Number of sets for each RSN.

5. Identify submittal as initial or resubmittal.

E. Resubmittal of submittals not approved:

1. Mark changes such that they are readily identifiable and show revision date.

2. Describe reasons for significant changes in transmittal letter.

3. Resubmit returned submittals within 7 days after receiving comments, unless otherwise directed.

01 33 00 - 4

4. Requirements for initial submittals apply to resubmittals.

F. Submit each RSN under a separate transmittal letter. Multiple RSNs submitted under a single letter will be returned for resubmittal.

1.06 REVIEW OF SUBMITTALS

A. Time Required:

1. Submittal review will require 28 days for review of each submittal or resubmittal, unless otherwise specified.

2. Time required for review of each submittal or resubmittal begins when complete sets of materials required for a particular RSN are received and extends through return mailing postmark date.

B. Time in Excess of Specified:

1. CO may extend contract completion date to allow additional time for completing work affected by excess review time.

a. Time extension will be to extent that excess review time caused delay to contract completion date.

b. Time extension will not exceed time used in excess of specified number of days for review of submittals or resubmittals.

c. Concurrent days of excess review time resulting from review of 2 or more separate submittals or resubmittals will be counted only once in extending contract completion date.

2. No time extension will be allowed if Contractor fails to make complete action submittals in sequence and within time periods specified.

3. Adjustment for delay will be made only to extent that:

a. Approval was required under contract,

b. Requests for approval were properly and timely submitted and were approved.

4. Adjustment will be subject to terms of paragraphs (b) and (c) of the clause at FAR

52.242-14, Suspension of Work; however, no such delay shall be deemed to be a “suspension order” as the term is used in that clause.

C. Submittal response:

1. Response letter will indicate whether submittal is approved, approved subject to identified changes, or not approved.

a. Revise and resubmit submittals not approved.

b. Do not change designs without approval of CO after drawings, documentation, and technical data have been approved.

01 33 00 - 5

1.07 TRANSMITTAL

A. Addresses for codes receiving paper copy submittals listed in Table 01 33 00A - List of Submittals:

1. CO, Bureau of Reclamation, Attention GP-5000 P.O. Box 36900, Billings, MT

59107-6900; Physical Address: 2021 4th Avenue North, Billings, MT 59101.

2. COR, Bureau of Reclamation, Attention OK-McCrackin, Oklahoma-Texas Area

Office, Oklahoma City Field Office, 5924 NW 2nd Street, Suite 200, Oklahoma City, OK 73127-6514.

B. E-mail address for electronic submittals listed in Table 01 33 00A – List of Submittals:

cmccrackin@usbr.gov.

1. Submit electronic submittals that are too large for e-mail along with paper copy.

C. Submittals required by specifications, but not listed in Table 01 33 00A - List of Submittals:

1. Submit in accordance with this section.

2. Submit to COR, unless otherwise specified.

PART 2 PRODUCTS

Not Used

PART 3 EXECUTION

01 33 00 - 6

Table 01 33 00A. - List of Submittals ** CO indicates Contracting Officer, COR indicates Contracting Officer’s Representative.

RSN

Clause or

Section Title

Submittals required Due date or delivery time

Responsible code

Sets to be sent: **

CO COR

1 Performance and Payment Bonds - Construction 52.228-15

Performance and Payment Bonds

Within 10 calendar days after award

CO 1

electronic

2 Additional Bond Security 52.228-2

Evidence of Increase in Bond Security

Within 10 calendar days after modifications increasing contract value

CO 1

electronic

3 Insurance-Work on a Government Installation 1452.228-70

1) Written certification that the required insurance has been obtained

2) Current certification of insurance for each subcontractor

Before commencing onsite work

CO 1

electronic

4 Liability Insurance 1452.228-70

Acceptable Certificate of Liability Insurance

Prior to commencement of work under the contract

CO 1

electronic

5 Equal Opportunity 52.222-26

Information required by Executive Order

112246 (SF-100)

Within 30 days following award

CO 1

electronic

6 Reporting Executive Compensation and First Tier Subcontract Awards 52.204-10

Certification that executive compensation and subcontract awards were reported

Within 10 days of each report being submitted

CO 1

electronic

7 Schedule of Values

MB-1

Required for lump-sum items in the Bid Schedule

Submitted and approved before any payment other than bonds and insurance

CO 1

electronic

8 DOI-AAAP-0028

Electronic Invoicing and Payment Requirements (IPP)

DRAFT Invoice before entering into IPP

10 Days Prior to Payment Request

CO 1

electron ic

9 Release of Claims 1452.204-70

Release of Claims (DI-137) against the Government

After completion of the work and prior to final payment

CO 1

01 33 00 - 7

Table 01 33 00A. - List of Submittals ** CO indicates Contracting Officer, COR indicates Contracting Officer’s Representative.

RSN

Clause or

Section Title

Submittals required Due date or delivery time

Responsible code

Sets to be sent: **

CO COR

10 Labor Standards Data 52.222-11

1) List of subcontractors

2) Statement and acknowledgement Form (SF-1413) for each subcontract

Within 14 days after award of contract

COR 1

electronic

11 Payrolls and Basic Records 52.222-8

Copies of all payrolls Weekly for each week of contract performance

COR 1

electronic electronic

12 WBR 1452.237-80

Alt III – Security Requirements – Bureau of Reclamation – Alternate III

List of contractor and subcontractor employees

At least 10 days prior to arriving at worksite

COR 0 1

electronic

13 WBR 1452.237-80

Alt III – Security Requirements – Bureau of Reclamation – Alternate III

List of vehicles and equipment to be brought onsite

At least 10 days prior to arriving at worksite

COR 0 1

electronic

01 31 19-1 Project Management Work Plan Summary At least 60 days prior to starting work

COR 0 1

electronic

01 35 10-1 Safety Data Sheets Complete LHM and

SDS

At least 14 days before jobsite delivery of hazardous material

COR 0 1

electronic

01 35 10-2 Safety Data Sheets Updated LHM and

SDS

At least 14 days before jobsite delivery of hazardous material not previously listed

COR 0 1

electronic

01 35 20-1 Safety and Health Safety Program Submitted and accepted before commencing onsite work. See Section 3 of RSHS

COR 0 1

electronic

01 35 20-2 Safety and Health Monthly Accident Summary Report

First day of every month

COR 0 1

electronic

01 35 30-1 Contractors Onsite Safety Personnel

Resume At least 28 days before starting onsite work

COR 0 1

electronic

01 35 30-2 Contractors Onsite Safety Personnel

Safety Inspection Reports

Weekly COR 0 1

01 33 00 - 8

Table 01 33 00A. - List of Submittals ** CO indicates Contracting Officer, COR indicates Contracting Officer’s Representative.

RSN

Clause or

Section Title

Submittals required Due date or delivery time

Responsible code

Sets to be sent: **

CO COR

01 55 20-1 Traffic Control Traffic Control Plan At least 35 days before affecting public traffic

COR 0 1

electronic

01 56 10-1 Protection of Existing Installations

Plan for Protecting Existing Installations

At least 28 days before starting onsite work

COR 0 1

electronic

01 57 20-1 Environmental Controls

Fire Prevention Plan At least 28 days before starting onsite work

COR 0 1

electronic

01 57 30-1 Water Pollution Control

Water Quality Management Plan

At least 28 days before delivery or storage of oil

COR 0 1

electronic

01 57 30-2 Water Pollution Control

Pollution Prevention Plan

At least 28 days before delivery or storage of oil

COR 0 1

electronic

01 57 30-3 Water Pollution Control

Spill Prevention, Control, and Countermeasure (SPCC) Plan

At least 28 days before delivery or storage of oil

COR 0 1

electronic

01 71 20-1 Surveying Surveying Plan At least 35 days before beginning survey work; At least 35 days before personnel change

COR 0 1

electronic

01 71 20-2 Surveying Resume At least 35 days before beginning survey work; At least 35 days before personnel change

COR 0 1

electronic

32 31 30-1 Fencing and Gate Certification At least 28 days prior to procuring

COR 0 1

electronic

32 31 30-2 Fencing and Gate Certification At least 28 days prior to procuring

COR 0 1

electronic

32 31 30-3 Fencing and Gate Certification At least 28 days prior to procuring

COR 0 1

electronic

32 31 30-4 Fencing and Gate Certification At least 28 days prior to procuring

COR 0 1

Safety Data Sheets

01 35 10 - 1

SECTION 01 35 10

SAFETY DATA SHEETS

PART 1 GENERAL

1.01 MEASUREMENT AND PAYMENT

A. Cost:

1. Include in prices offered in the schedule for other items of work.

1.02 DEFINITIONS

A. LHM: List of Hazardous Materials

B. MSDS: Material Safety Data Sheet.

1.03 APPLICATION

A. For the purposes of this contract, the definition of “materials delivered under this contract” in the clause at FAR 52.223-3, Hazardous Material Identification and Material

Safety Data - Alternate 1, includes materials delivered to the Government, materials incorporated into the work, and materials used by the Contractor during contract performance at the jobsite.

1.04 SUBMITTALS

A. Submit the following in accordance with Section 01 33 00 - Submittals.

B. RSN 01 35 10-1, Complete LHM and MSDS.

C. RSN 01 35 10-2, Updated LHM and MSDS:

1. Comply with paragraph (e) of clause at FAR 52.223-3, Hazardous Material

Identification and Material Safety Data - Alternate 1.

1.05 DELIVERY

A. Do not deliver hazardous materials to jobsite which are not included on the original or previously updated LHM and MSDS before receipt of updated LHM and MSDS by the

Contracting Officer.

PART 2 PRODUCTS

Safety Data Sheets

01 35 10 - 2

PART 3 EXECUTION

Safety and Health

01 35 20 - 1

SECTION 01 35 20

SAFETY AND HEALTH

PART 1 GENERAL

1.01 MEASUREMENT AND PAYMENT

A. Cost:

1. Include in prices offered in the schedule for other items of work.

1.02 REFERENCE STANDARDS

A. Bureau of Reclamation (USBR)

1. RSHS Reclamation Safety and Health Standards.

Available on the Internet at:

http://www.usbr.gov/ssle/safety/RSHS/rshs.

html

2. FIST 1-1-12 Hazardous Energy Control Program.

Available on the Internet at:

www.usbr.gov/power/data/fist_pub.html

B. Occupational Safety and Health Administration (OSHA)

1. 29 CFR Part 1910 Occupational Safety and Health Standards

2. 29 CFR Part 1926 Safety and Health Regulations for

Construction. Available on the Internet at www.osha.gov

C. American Conference of Governmental Industrial Hygienists (ACGIH)

1. Threshold Limit Values (TLVs). Available at www.acgih.org

1.03 SUBMITTALS

A. Submit the following in accordance with Section 01 33 00 - Submittals.

B. RSN 01 35 20-1, Safety program:

1. Submit a comprehensive, job-specific safety and health program in accordance with Section 01 33 00 - Submittals and in accordance with the requirements of

Section 3.3 of the Reclamation Safety and Health Standards (RSHS) and these specifications.

2. The Safety Program will not be accepted for review by the COR unless it addresses, in order, lettered and numbered per Appendix B of the RSHS, a http://www.osha.gov/ http://www.acgih.org/

01 35 20 - 2 comprehensive narrative for each applicable item in the outline and program elements contained in these specifications.

3. Generic company safety programs are not acceptable. The Safety Program must be site specific for this contract.

4. The Contractor’s Safety Program must be submitted and accepted by Reclamation prior to commencing onsite work, including mobilization.

5. The Safety Program Statement of Responsibility must state that “the contractor is responsible for ensuring that all work will be in compliance with Reclamation

Safety and Health Standards and these specifications.”

C. RSN 01 35 20-2, Monthly accident summary report:

1. Form 7-2218 or other acceptable form in accordance with paragraph 3.8 of RSHS.

2. Submit on the first day of every month.

1.04 SAFETY AND HEALTH

A. Comply with RSHS, local safety programs, and any other referenced safety and health standards. Perform work in accordance with the specific safety program elements and referenced standards.

B. Provide and maintain a work environment and procedures that will:

1. Safeguard the public, Government personnel, and Contractor employees from

Contractor operations and activities that are unsanitary, hazardous, or dangerous to health and safety.

C. For each operation requiring the use of heavy equipment, in addition to the use of backup alarms and high visibility vests, include in the Job Hazard Analysis specific steps to ensure the protection of onsite personnel (internal traffic control) from the hazards of being struck by or caught between moving equipment while working around such equipment. Possible methods of controlling said hazards may include radio communications, backup cameras and/or proximity devices, designated observers, etc.

Provide all appropriate safety barricades, signs, and warnings.

D. Comply specifically with all requirements contained in RSHS Section 3 - Contractor

Requirements.

E. Investigate and report all accidents, incidents and near misses in accordance with RSHS

Section 3.7.

F. When the Contractor fails or refuses to promptly correct a compliance directive, the

Contracting Officer may issue an order to stop all or any part of the work.

1. When satisfactory corrective action is taken, an order to resume work will be issued.

01 35 20 - 3

2. The Contractor shall not be entitled to extension of time or to claim for damage or to additional compensation by reason of ether the directive or the stop order.

3. Failure of the Contracting Officer to order discontinuance of any or all of the

Contractor’s operations shall not relieve the Contractor of the responsibility for the safety of personnel and property.

G. Disputes regarding safety and health issues will be settled in accordance with RSHS

Section 3.

H. The Contractor shall be responsible for providing medical and emergency assistance in a timely manner that is consistent with recognized emergency protocols.

1. In instances where local emergency responders are not readily available, the responsibility to provide emergency services shall default back to the Contractor.

I. The Contractor shall be responsible for insuring that Subcontractors comply with the requirements set forth in this specification, written programs, the regulatory standards and the industry standards incorporated by reference in the RSHS and OSHA standards.

J. Where there is conflict between the standards, the more stringent or restrictive shall be utilized.

K. The Contractor shall fully participate in the Contractor Safety Program Review meeting, according to RSHS Section 3.4.1. The Contractor Safety Program Review meeting will take place before the start of construction.

1. Include subcontractor management representatives.

2. The Safety Personnel shall be present, in order to discuss in detail the Safety

Program and Plans.

3. The COR, the Contractor's principal onsite representative, and designated members of respective staffs must participate in the Price Scheduled monthly safety meeting (JPSM) according to RSHS Section 3.4.2.

L. The minimum work crew at any time on the construction site shall consist of no less than two (2) people.

PART 2 PRODUCTS

Not Used

PART 3 EXECUTION

Contractor’s Onsite Safety Personnel

01 35 30 - 1

SECTION 01 35 30

CONTRACTOR’S ONSITE SAFETY PERSONNEL

PART 1 GENERAL

1.01 MEASUREMENT AND PAYMENT

A. Cost:

1. Include in prices offered in the schedule for other items of work.

1.02 SUBMITTALS

A. Submit the following in accordance with Section 01 33 00 - Submittals.

B. RSN 01 35 30-1, Resume:

1. Contractor’s Onsite Safety Representative

C. RSN 01 35 30-2, Safety Inspection Reports:

1. List noted deficiencies, their abatement dates, and follow-up action for jobsite activities.

2. Base inspection report on findings of jobsite walk-through with Government personnel.

1.03 QUALIFICATIONS

A. Contractor’s Onsite Safety Representative:

1. Competent supervisory employee with appropriate level of safety related training and experience.

1.04 APPLICATION

A. Designate an employee as the Contractor’s Onsite Safety Representative prior to start of construction.

B. Contractor’s Onsite Safety Representative authorities, duties, and responsibilities:

1. Review and approve the Contractor’s Safety Program prior to submittal.

2. Responsible for effectively implementing the Contractor’s Safety Program

3. Full authorization to correct unsafe acts on the spot.

4. Prepare safety inspection reports.

5. Onsite during construction activities.

Contractor’s Onsite Safety Personnel

01 35 30 - 2

1.05 QUALITY ASSURANCE

A. Contractor’s Onsite Safety Representative:

1. The effectiveness of the Contractor’s Onsite Safety Representative in prosecuting the safety program will be subject to continued review and approval by the CO.

2. Should the Contractor’s safety effort be considered inadequate, the CO has the option to require the Contractor to employ a qualified Safety Professional.

B. Safety Program:

1. The effectiveness of the Contractor’s Safety Program will be subject to continued review and approval by the CO.

PART 2 PRODUCTS

Not Used

PART 3 EXECUTION

Reference Standards

01 42 10 - 1

SECTION 01 42 10

REFERENCE STANDARDS

PART 1 GENERAL

1.01 MEASUREMENT AND PAYMENT

A. Cost:

1. Include in prices offered in the schedule for other items of work.

1.02 REFERENCE STANDARDS

A. Referenced editions of standard specifications, codes, and manuals form a part of this specification to the extent referenced.

B. These specifications take precedence when conflicting requirements occur between specifications and referenced standard.

1.03 JOBSITE REFERENCE STANDARDS

A. Maintain at fabrication site, a copy of referenced standard specifications, codes, and manuals required for work in progress at fabrication site. Make available for use by the

Government.

B. Maintain onsite, a copy of referenced standard specifications, codes, and manuals required for onsite work in progress. Make available for use by the Government.

1.04 AVAILABILITY

A. Code of Federal Regulation (CFR):

1. Available online, authorized by the National Archives and Records

Administration (NARA) and the Government Printing Office (GPO), at www.gpoaccess.gov/cfr/index.html.

B. Federal Specifications, Standards, and Commercial Item Descriptions; and Military

Specifications:

1. Copies of Federal Specifications, Standards, and Commercial Item Descriptions may be obtained from GSA Federal Supply Service, see the provision at FAR

52.211-1, Availability of Specifications Listed in the GSA Index of Federal

Specifications, Standards and Commercial Item Descriptions, FPMR Part 101-29.

2. Copies of Military Specifications may be obtained from Department of Defense, see the provision at FAR 52.211-2, Availability of Specifications, Standards, and

Data Item Descriptions Listed in the Acquisition Streamlining and

Standardization Information System (ASSIST).

01 42 10 - 2

C. Bureau of Reclamation Documents:

1. Reclamation Safety and Health Standards (RSHS), 2009 edition, may be downloaded at http://www.usbr.gov/ssle/safety/RSHS/rshs.html.

a. Hard copies of RSHS, stock number 024-003-00204-6, may be purchased from The Superintendent of Documents at the U.S. Government Printing

Office (GPO), phone number (202) 512-1800.

1) GPO online bookstore:

http://bookstore.gpo.gov/actions/GetPublication.do?stocknumber=

024-003-00204-6.

2. Bureau of Reclamation Standard Specifications are designated with an M-number. Copies of individual standards may be obtained from Bureau of

Reclamation, Attn 86-68170, PO Box 25007, Denver CO 80225-0007. Specify which standard(s) is needed when requesting a copy.

3. Bureau of Reclamation manuals and other publications including significant scientific, technical, and engineering works are available from the National

Technical Information Service (NTIS). Information regarding availability and pricing may be obtained by contacting NTIS at the following address:

United States Department of Commerce

National Technical Information Service

5285 Port Royal Road

Springfield, Virginia 22161

Telephone: (703)487-4650 or 1-800-553-6847

D. Industrial and Governmental Documents:

1. When a reference has a joint designation (e.g. ANSI/IEEE) these specifications generally cite the proponent organization (e.g. IEEE).

2. Addresses for obtaining industrial and governmental (other than Federal and

Bureau of Reclamation specifications and standards) specifications, standards, and codes are listed in Table 01 42 10A - Addresses for Specifications, Standards, and Codes.

http://www.usbr.gov/ssle/safety/RSHS/rshs.htm http://bookstore.gpo.gov/actions/GetPublication.do?stocknumber=024-003-00204-6 http://bookstore.gpo.gov/actions/GetPublication.do?stocknumber=024-003-00204-6

01 42 10 - 3

Table 01 42 10A - Addresses for Specifications, Standards, and Codes

Acronym Name and Address Telephone

AASHTO American Association of State Highway and

Transportation Officials

444 North Capitol St., NW, Suite 249

Washington, DC 20001 www.aashto.org

(202) 624-5800

(800) 231-3475

AGC Associated General Contractors of America

333 John Carlyle Street, Suite 200

Alexandria VA 22314 www.agc.org

(703) 548-3118

AISC American Institute of Steel Construction

One East Wacker Dr., Suite 3100

Chicago, IL 60601-2001 www.aisc.org

(312) 670-2400

ANSI American National Standards Institute

1819 L. Street, N.W.

Washington, DC 20036 www.ansi.org

(202) 293-8020

APA/EWA APA-The Engineered Wood Association

P.O. Box 11700

Tacoma, WA 98411-0700 www.apawood.org

(253) 565-6600

ASME American Society of Mechanical Engineers

3 Park Ave.

New York, NY 10016-5990 www.asme.org

(800) 843-2763

ASTM ASTM International

PO Box C700

100 Barr Harbor Dr.

West Conshohocken, PA 19428-2959 www.astm.org

(610) 832-9585

AWS American Welding Society

550 NW LeJeune Rd.

Miami, FL 33126 www.amweld.org

(800) 443-9353

(305) 443-9353 http://www.aashto.org/ http://www.agc.org/ http://www.aisc.org/ http://www.ansi.org/ http://www.apawood.org/ http://www.asme.org/ http://www.astm.org/ http://www.amweld.org/

01 42 10 - 4

Table 01 42 10A - Addresses for Specifications, Standards, and Codes

Acronym Name and Address Telephone

CLFMI Chain Link Fence Manufacturers Institute

9891 Broken Land Pkwy, Suite 300

Columbia, MD 21046 www.chainlinkinfo.org

(301) 596-2583

IEEE Institute of Electrical and Electronics Engineers

3 Park Ave.,17th Floor

New York, NY 10016-5997 www.ieee.org

(212) 419-7900

NACE NACE International

1440 South Creek Drive

Houston, TX 77084 www.nace.org

(281) 228-6200

NEMA National Electrical Manufacturers Association

1300 N 17th St., Suite 1847

Rosslyn, VA 22209 www.nema.org

(703) 841-3200

NFPA National Fire Protection Association

One…