SF_30_140R6024Q0085_Amendment_0002_0002.pdf

(x)

140R6024Q0085 x x

1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted ; or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGEMENT TO BE

RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR

OFFER. If by virtue of this amendment you desire to change an offer already submitted , such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

x

Billings MT 59101

R60

2021 4th Avenue North Regional Office Missouri Basin Region Bureau of Reclamation

07/10/20240002

13. THIS ITEM ONLY APPLIES TO MODIFICATION OF CONTRACTS/ORDERS. IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

12. ACCOUNTING AND APPROPRIATION DATA (If required) is not extended.is extended, Items 8 and 15, and returning

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended , by one of the following methods: (a) By completing

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

FACILITY CODE CODE

10B. DATED (SEE ITEM 13)

10A. MODIFICATION OF CONTRACT/ORDER NO.

9B. DATED (SEE ITEM 11)

9A. AMENDMENT OF SOLICITATION NO.

CODE

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code)

7. ADMINISTERED BY (If other than Item 6)CODE 6. ISSUED BY

PAGE OF PAGES

4. REQUISITION/PURCHASE REQ. NO.3. EFFECTIVE DATE2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO. (If applicable)

1. CONTRACT ID CODE

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

07/10/2024

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority) appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

E. IMPORTANT: Contractor is not is required to sign this document and return __________________ copies to the issuing office.

ORDER NO. IN ITEM 10A.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

The purpose of this amendment is to add the drawings of the generator air coolers. Please see the attached document.

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)15A. NAME AND TITLE OF SIGNER (Type or print)

15C. DATE SIGNED 16B. UNITED STATES OF AMERICA 15B. CONTRACTOR/OFFEROR 16C. DATE SIGNED

(Signature of person authorized to sign) (Signature of Contracting Officer)

Travis Stephens

STANDARD FORM 30 (REV. 11/2016)

Prescribed by GSA FAR (48 CFR) 53.243

Previous edition unusable

Except as provided herein, all terms and conditions of the document referenced in Item 9 A or 10A, as heretofore changed, remains unchanged and in full force and effect .

Solicitation No. 140R6024Q0085 Amendment No. 00001

Description of Changes: The following changes are hereby incorporated into and made a part of this solicitation:

1) Inclusion of drawings for the generator air housing coolers. (please see the attached drawings)

Receipt of Quotes: The hour and date for receipt of the quotes has not changed.

Third Party: If you have given a copy of the solicitation to someone else, please forward this amendment accordingly.

4 12

3.

3.

4.

3.

8 4X

17 20

14 20 16X

10X

3X

STATIONARY END

6X

16 20

152022X 2X

2X

2X

FLOATING END

4X

1/2

4X

25 1.

2.

50X2. 16 20 16X

3X

NOTES:

1. TUBE COLLARS ARE NOT CENTERED ON TUBES. ENSURE TUBES ARE INSTALLED

INTO FRAME WITH COLLARS CENTERED WITHIN THE FRAME TUBE SUPPORT.

2. SET EXPANSION JOINT GAP IN FLOATING END TO 1/2" BEFORE ROLLING TUBES.

ROLL TUBES TO CONTACT, THEN ROLL TO 8-10% WALL REDUCTION.

3. APPLY SILICONE OR POLYMER SEALANT TO WATER BOX GASKETS, DO NOT APPLY

TO FRAME GASKETS.

4. FOR THE EXPANSION JOINT GASKET, CUT THE GUM RUBBER TUBING TO LENTGH

AND CUT LAP JOINTS IN ENDS OF SHORT PIECES TO SEAL CORNERS. APPLY

CONTACT ADHESIVE TO FRAME TO HOLD THE TUBING IN PLACE.

5. PRESSURE TEST ASSEMBLED COOLER AT 75 PSIG FOR 2 HOURSNO LEAKS ARE

PERMITTED.

6. REFER TO DRAWING 10398-00-DWG-02 FOR DETAILS AND OUTLINE DIMENSIONS.

C

17 68

REVISIONS

5 3 24

APPROVED

JHG

D

DESCRIPTION

REVZONE DATE

ISSUED FOR PRODUCTION 9/8/23

SHEET OF

23 AUG 2023

E. RIVERA

D

REV

1/8

10398-00-DWG-01

PRODUCTION

PARTS LIST / LIST OF MATERIALS

QTY QTY

SCALE

ITEM PART NUMBER DESCRIPTION MATERIAL / SPECIFICATION

DRAWING NO.

B

Monte Vista, CO 81144

(719) 852-5070 - FAX (719) 852-2717

www.brimhallindustrial.com

GRISCOM-RUSSELL K-FIN COOLER

PROJECT NO.

DO NOT SCALE DRAWING

DRAWN BY:

COOLER ASSY

6 SEP 2023

DATE

CHECKED BY

230409APPROVED BY

8 SEP 2023JHG

TOLERANCES

.XXX `.001, .XX `.01

FRACTION `1/64

ANGLES `1_

r.001, b.001, f.001, c.001

Brimhall Industrial, Inc.

SIZE

THIRD ANGLE

PROJECTION

J. GARRARD

UNLESS OTHERWISE SPECIFIED:

ALL DIMENSIONS IN INCHES [MM]

REMOVE ALL BURRS

BREAK EDGES .010-.020

SURFACE FINISH -

-01

A

QUALITY

ASTM A36 STEEL WELDMENT (SEE DRAWING)FRAME10398-0111

UNS-C46400 NAVAL BRASS, 1/4 HARD, ASTM B171TUBESHT, FLTG10398-0212

CAST BRONZECOVER, FLTG10398-0313

UNS-C46400 NAVAL BRASS, ASTM B171TUBESHT, STA10398-0414

CAST BRONZEWTR BOX,STA10398-0515

CAST BRONZECOVER, STA10398-0616

ASTM A36 PLATE, 1/4"THKBRKT,LFT,FLTG10398-1217

AISI 1018 COLD DRAWN STEEL ROD, 5/8" X 3" LPIN, GUIDE10398-1348

UNS-C70600 90/10 CuNi WITH Cu FINS, SOLDER DIPPEDTUBE, FINNED10384-17509

SYNTHETIC FIBER GASKET, NITRILE BINDER, 1/8" THKSPACER, STA10398-19110

SYNTHETIC FIBER GASKET, NITRILE BINDER, 1/16" THKGASKET, FLTG10398-20111

SYNTHETIC FIBER GASKET, NITRILE BINDER, 1/16" THKGSKT,STA TS10398-21112

SYNTHETIC FIBER GASKET, NITRILE BINDER, 1/16" THKGSKT, STA COV10398-22113

STEEL, GRADE B7, 3/4-10 UNC X 3-IN LSTUD,3/4-10X3M98750A3051614

STEEL, GRADE B7, 3/4-10 UNC X 4-IN LSTUD,3/4-10X4M98750A3092215

STEEL, GRADE B7, 3/4-10 UNC X 4-1/2 IN LSTUD,3/4-10X4.5M98750A3111816

STEEL, GRADE B7, 3/4-10 UNC X 12-IN LSTUD,3/4-10X12M98957A5021017

STEEL, CUP PT, SQ HD, 5/8-11 UNC X 2 IN LSCREW, SETM9140A843418

STEEL, CUP PT, SQ HD, 5/8-11 UNC X 3 IN LSCREW, SETM91410A806419

STEEL, GRADE 5, 3/4-10 EXTRA WIDE, 1-1/4 HEX X .734" TNUT,HEX,WDM95045A0366620

BRASS, SQ HD, LOW PRESSURE, 1/2" NPTPLUG, NPTM4429K314521

BRASS, SQ HD, LOW PRESSURE, 3/4" NPTPLUG, NPTM4429K315522

BRASS, SQ HD, LOW PRESSURE, 1" NPTPLUG, NPTM4429K287223

BRASS, SQ HD, LOW PRESSURE, 2" NPTPLUG, NPTM4429K291624

GUM RUBBER, 1/2" ID X 3/4" OD, SHORE A45, CUT TO LENGTHTUBE,GUM RBRM5733N172125

58 4 PROPERTY RIGHTS OF THIS DRAWING ARE CONVEYED TO BUREAU OF RECLAMATION. ANY USE OR REPRODUCTION WITHOUT WRITTEN PERMISSION IS PROHIBITED.

7 6

A

C

D

B

121 5/16

1 3/16105 1/16

107 1/2 FRAME LENGTH1/2 EXP JT

28 15/16

WATER BOX

26 1/2

FRAME

18 1/2

13 1/4

WATER BOX

1 11/16

FRAME

4 7/8

64 °

13 COVER

28 3/4

COVER

13 15/16 WATER BOX

28 15/16

WATER BOX

STATIONARY END

13 15/16 COVER

26 1/2

COVER

FLOATING END

5 n7 n2

129 OAL

INLET/OUTLET PORTS

4 X n 3/4 x THRU n5-1/2 BC n2 n7

4XØ3/4 THRU

NOTES:

1. TUBES -

UNS-C70600 90/10 CUPRO-NICKEL PER ASTM B111

1.000 INCH OD X .065 INCH AW

2. TUBE FINS -

1.800 INCH OD X .015 IN THICK COPPER, 7 FPI, EDGE TENSION WOUND, LEAD FREE SOLDER DIPPED

SUPPORT COLLAR .020 THICK OVER FIN OD

3. TUBE SHEETS -

NAVAL BRASS PER ASTM B171

4. FRACTIONAL DIMENSIONS ARE `1/16".

5. SEE DRAWING 10398-00-DWG-01 FOR ASSEMBLY DETAILS.

REV

10398-00-DWG-02

A

DRAWING NO.

Monte Vista, CO 81144

(719) 852-5070 - FAX (719) 852-2717

www.brimhallindustrial.com

GRISCOM-RUSSELL K-FIN COOLER

1SHEET OF

Brimhall Industrial, Inc.

COOLER,

FINNED TUBES, 4-PASS

D

C

B

REVISIONS

ZONE DESCRIPTIONREV DATE APPROVED

5 4 28 67 3 1

B

C

PROPERTY RIGHTS OF THIS DRAWING ARE CONVEYED TO BUREAU OF RECLAMATION. ANY USE OR REPRODUCTION WITHOUT WRITTEN PERMISSION IS PROHIBITED.

D

A

1/10

THIRD ANGLE

PROJECTION JHG

7 4

SCALE

8 SEP 2023

8 5 2

CHECKED BY

QUALITY

-01

23 AUG 2023

PRODUCTION

DATEDRAWN BY:

E. RIVERA

DO NOT SCALE DRAWING

UNLESS OTHERWISE SPECIFIED:

ALL DIMENSIONS IN INCHES [MM]

REMOVE ALL BURRS

BREAK EDGES .010-.020

SURFACE FINISH - 6 SEP 2023

TOLERANCES

.XXX `.001, .XX `.01

FRACTION `1/64

ANGLES `1_

r.001, b.001, f.001, c.001

J. GARRARD

QTY REQD

APPROVED BY

ITEM PART NUMBER DESCRIPTION MATERIAL / SPECIFICATION

PARTS LIST / LIST OF MATERIALS

230409

PROJECT NO.SIZE

ISSUED FOR PRODUCTION JHG9/8/230

107 1/2

2 102 7/8

5/8

1. 2.1/4 1/8

4X

105 1/161 1/4 1 3/16

A

A

1/4 1/4

36X 24 1/2

4X 5 EQ SP HOLES

32X 2 HOLES

6 1/8( )

4X 105 9/16 (18 EQ SP HOLES) 15/16( )

36X 1

1( ) 53 7/8

107 1/2

6.210( )

10 X 5/8-11 UNC-2B x 1 3/8 w 118° x 1 1/2 MAX TAP DRILL

BOTH SIDES

32 X 5/8-11 UNC-2B x THRU

BOTH SIDES

B

2X 9 1/4

5 EQ SP

HOLES

2 5/16( ) 2 3/8( )

2X 2 3/8

13/16( ) 2X26 7/8 (8 EQ SP HOLES) 13/16

7/8

8X12 1/4

7/8( )

2 7/82X22 3/4

8 EQ SP

HOLES

2 7/8( )

28 1/2 1 1/2

10 X 3/4-10 UNC-2B

x 1 1/4 w 118° x 1 1/2 MAX TAP DR

3/8 60°

4X

16 X 3/4-10 UNC-2B

x 1 1/4w118 ° x1 1/2 MAX TAP DRILL

1.

9 3/16

2 13/32( )

2 13/32

7 1/16

1 1/4 1 1/4( )

1 1/2

26 1/2

1/2

4 x n 11/16 x THRU n1 x THRU

3/8 60°

4X1.

11 1 10398-17 SUPPORT, TUBE ASTM A36 STEEL PLATE, 14 X 22-1/2 X 7/8 THK

10 1 10398-16 BKT, STA LFT ASTM A36 HOT ROLLED STEEL FLAT, 3-1/4" X 3/4" X 4" L (AISI 1018 CRS PERMISSIBLE)

9 1 10398-15 FR END, STA TOP ASTM A36 HOT ROLLED STEEL FLAT, 3-1/2" X 5/8" THK X 14" L (AISI 1018 CRS PERMISSIBLE)

8 2 10398-14 FR END, STA H ASTM A36 HOT ROLLED STEEL FLAT, 2" X 2" X 24-1/2" L (AISI 1018 CRS PERMISSIBLE)

7 4 10398-11 FR END, VERT ASTM A36 HOT ROLLED STEEL FLAT, 2" X 2" X 14" L (AISI 1018 CRS PERMISSIBLE)

6 2 10398-10 FR END, FLTG H ASTM A36 HOT ROLLED STEEL FLAT, 2" X 2" X 22-1/2" L (AISI 1018 CRS PERMISSIBLE)

5 1 10398-09 ANGLE, FRAME ASTM A-36 ANGLE, 1-1/2" X 1-1/2" X 1/4" THK X 105-1/16" L

4 2 10398-08-2 FR STIF, SHT ASTM A36 HOT ROLLED STEEL FLAT, 1-1/4" X 1/2" X 101-7/8" L (AISI 1018 CRS PERMISSIBLE)

3 2 10398-08-1 FR STIF, LG ASTM A36 HOT ROLLED STEEL FLAT, 1-1/4" X 1/2" X 102-1/2" L (AISI 1018 CRS PERMISSIBLE)

2 1 10398-07-2 PANEL, SIDE ASTM A36 SHEET, 10GA (.1345" THK), 2" X 14" U CHANNEL, 102-7/8" L

1 1 10398-07-1 PANEL, SIDE ASTM A36 SHEET, 10GA (.1345" THK), 2" X 14" U CHANNEL, 103-1/2" L

Section A-A

A

1/84X

4X .95

2X2

Detail A

1/4 2-16 1/8

4X

3/8 2-16 3/8

4X

SCALE: FULL

1/2

Detail B

103 1/8 (16 EQ SP PLUG WELDS) 31/32

16X 3/4 6 7/8( )

5/8 6-7/8 16X

1. GRIND EXTERIOR WELDS FLUSH WITH

FRAME TO MEET OVERALL ENVELOPE

DIMENSIONS.

2. FILLET WELD INSIDE CHANNEL, SQUARE

WELD OUTSIDE CHANNEL TO FRAME ENDS.

3. INCREASE FRACTIONAL TOLERANCE TO

`1/32.

REV

TOLERANCES

.XXX `.001, .XX `.01

FRACTION `1/64

ANGLES `1_

r.001, b.001, f.001, c.001

C

SCALE

QUALITY

PROPERTY RIGHTS OF THIS DRAWING ARE CONVEYED TO BUREAU OF RECLAMATION. ANY USE OR REPRODUCTION WITHOUT WRITTEN PERMISSION IS PROHIBITED.

DO NOT SCALE DRAWING 10398-01-DWG-01

Brimhall Industrial, Inc.11 AUG 2023

ZONE

DATE

A

B

-01

DATE

1:8 & NOTED

C

UNLESS OTHERWISE SPECIFIED:

ALL DIMENSIONS IN INCHES [MM]

REMOVE ALL BURRS

BREAK EDGES .010-.020

SURFACE FINISH -

SHEET OF

REVISIONS

SIZE

B

Monte Vista, CO 81144

(719) 852-5070 - FAX (719) 852-2717

www.brimhallindustrial.com

REV

JHG

8 SEP 2023

A

5 4

JHG

9/8/23

CHECKED BY

APPROVED BY

PROJECT NO.

D

E. RIVERA GRISCOM-RUSSELL K-FIN COOLER

ITEM PART NUMBER DESCRIPTION MATERIAL / SPECIFICATION

FRAME WELDMENT

230409

ISSUED FOR PRODUCTION

APPROVED

PRODUCTION

DRAWING NO.

QTY QTY

DESCRIPTION

DTHIRD ANGLE

PROJECTION

PARTS LIST / LIST OF MATERIALS

6 SEP 2023

J. GARRARD

DRAWN BY:

D

1.

1/4

4X .185±.005

1.000`.015

13/324X

4X 3/4

1.

3.

24.000

2X 1.250

1.250( )

2X 2.375 2X 9.188 2.375( )

2X 24.750

9 EQ SP HOLES

.875

.875( )

3.094( )

9X .844 9X 12.250

2X 5 EQ SP HOLES

7X 2 HOLES

.844( )

3.062( )

6X 3/4-10 UNC-2B x THRU

18X 3/4-10 UNC-2B x THRU4X 5/8-11 UNC-2B x .500 x.585 MAX TAP DR

FLAT BOTTOM FRAME SIDE

3.

3.

3.

3.

3X 4.250

2.125( )

1.906( )1.906 4.000

7.813

26 1/2

3X 19.125

10 EQ SP HOLES

3.125( )

3.063 3.063( )

2X 3.188

2X 19.125

10 EQ SP

HOLES

4.188( )

13 15/16

10X 6.969

2.125( )

50X Ø1.010±0.002

REAMED

6.969( )

WATER BOX SIDE

3.

3.

3. 3.

3.

3.

NOTES:

1. SURFACES TO BE FLAT, WATER BOX SIDE TO BE FREE OF SCRATCHES

IN SEALING AREAS. SKIM IF NECESSARY.

2. CENTER CNC PROGRAM ON MATERIAL WHEN MACHINING.

3. TOLERANCE FOR NON CNC DRILLING TO BE `.005".

CHECKED BY

DESCRIPTION

9/8/23

ITEM PART NUMBER DESCRIPTION MATERIAL / SPECIFICATION

UNS-C46400 NAVAL BRASS, 1/4 HARD, ASTM B171

THIRD ANGLE

PROJECTION

A

E. RIVERA

10398-02-DWG-01

10398-02

B

PRODUCTION

DATE

UNLESS OTHERWISE SPECIFIED:

ALL DIMENSIONS IN INCHES [MM]

REMOVE ALL BURRS

BREAK EDGES .010-.020

SURFACE FINISH -

PROPERTY RIGHTS OF THIS DRAWING ARE CONVEYED TO BUREAU OF RECLAMATION. ANY USE OR REPRODUCTION WITHOUT WRITTEN PERMISSION IS PROHIBITED.

D

Monte Vista, CO 81144

(719) 852-5070 - FAX (719) 852-2717

www.brimhallindustrial.com

D

DRAWN BY:

8 SEP 2023

TOLERANCES

.XXX `.001, .XX `.01

FRACTION `1/64

ANGLES `1_

r.001, b.001, f.001, c.001

C

A

DRAWING NO.

REV

SCALE

TUBESHT,FLTG

GRISCOM-RUSSELL K-FIN COOLER

DATE

230409

APPROVED

SIZE

ZONE

JHG

Brimhall Industrial, Inc.

APPROVED BY

QTY REQD

JHG

6 SEP 2023

ISSUED FOR PRODUCTION

DO NOT SCALE DRAWING

PARTS LIST / LIST OF MATERIALS

26 JUL 2023

J. GARRARD/ER

B

C

SHEET OF1/2

QUALITY

REV

D

PROJECT NO.

-02

REVISIONS

TUBE SHEET,

FLOATING

2X 2 3/8

2X 2 5/16

5 1/24 7/32

5 1/24 7/32 4 7/32( )

4 7/32( )

13 15/16

26 1/2 n2 7/8

5 1/2

2X 15 1/2

5 1/2( )

A

A

EXTERIOR SIDE

1/2-13 UNC-2B x .750w118 ° x1.000 MAX TAP DR

2X 3/4 - 14 NPT x THRU

FROM THIS SIDE

2X 1/2 - 14 NPT x THRU

FROM THIS SIDE

4X 5/8-11 UNC-2B x THRU vn.656 x 1.000

.875

3.094( )

5X 24.750

2X 9 EQ SP HOLES

3X 2 HOLES

.875( )

.844

3.062( )

9X 12.250

2X 5 EQ SP HOLES

7X 2 HOLES

.844( )

14.00

.40

2X 1.75

4X 1.75

8.169`.010

5.769`.0102X .40

2X R3/8

2X R3/8

8X R3/8

TUBE SHEET SIDE

6x n.875 x THRU

18x n.875 x THRU

3.

3.

5.

5.

5.

5.

R 3/8

BOTH

POCKETS

2X 1 3/8

BOTH

POCKETS

2 3/8 3/4

Section A-A

1.

NOTES:

1. SURFACES TO BE FLAT, TUBE SHEET SIDE TO BE FREE OF SCRATCHES

IN SEALING AREAS. SKIM IF NECESSARY.

2. CENTER CNC PROGRAM ON MATERIAL WHEN MACHINING.

3. TEST FIT ONTO TUBE SHEET AND BEVEL DIVIDER AND PERIMETER TO

CLEAR TUBES IF NEED.

4. ORIGINAL COVER IS CAST BRONZE WITH INTERIOR DRAFT ANGLES - NOT

REQUIRED WITH ANY NEW WELDED FABRICATION.

5. TOLERANCE FOR NON CNC DRILLING TO BE `.005".

DATE

PARTS LIST / LIST OF MATERIALS

A

APPROVED BY

UNLESS OTHERWISE SPECIFIED:

ALL DIMENSIONS IN INCHES [MM]

REMOVE ALL BURRS

BREAK EDGES .010-.020

SURFACE FINISH -

DESCRIPTION

UNS-C46400 NAVAL BRASS, 1/4 HARD, ASTM B171

JHG

APPROVED

8 SEP 2023

PROJECT NO.

7 4

26 JUL 2023

D

Brimhall Industrial, Inc.

10398-03-DWG-01

DATE

SCALE

230409

J. GARRARD/ER

C

DO NOT SCALE DRAWING

THIRD ANGLE

PROJECTION 1

9/8/23

ZONE

-03

SIZE

ITEM PART NUMBER DESCRIPTION MATERIAL / SPECIFICATION

REV

COVER & WATER BOX,

FLOATING

CHECKED BY

B

E. RIVERA

SHEET OF

B

JHG

QUALITY

TOLERANCES

.XXX `.001, .XX `.01

FRACTION `1/64

ANGLES `1_

r.001, b.001, f.001, c.001

Monte Vista, CO 81144

(719) 852-5070 - FAX (719) 852-2717

www.brimhallindustrial.com

DRAWING NO.

DRAWN BY:

REV

10398-03

ISSUED FOR PRODUCTION

6 SEP 2023

COVER,FLTG

A

REVISIONS

D

PRODUCTION

D

C

1/2

GRISCOM-RUSSELL K-FIN COOLER

QTY REQD

PROPERTY RIGHTS OF THIS DRAWING ARE CONVEYED TO BUREAU OF RECLAMATION. ANY USE OR REPRODUCTION WITHOUT WRITTEN PERMISSION IS PROHIBITED.

3.063

1.906 4.000 1.906

7.813 3.063( )

6.969 6.969( )

13 15/16

28 3/4

3.188

2.125( )

2X 19.125

10 EQ SP HOLES

3X 19.125

10 EQ SP HOLES

4.250

5.375( ) 6.438( )

2.125( )

50X Ø1.010±.002

REAMED

WATER BOX SIDE

1.000`.015 2.313( )

2X 2.344 2X 9.250 (5 EQ SP HOLES) 2.344( )

.938( )

5X 26.875

5X .938

2X 3.000

2X 22.750

8 EQ SP HOLES

3.000( )

3.250( )

8X .422 8X 12.250 .844( )

26X Ø.875±.005

FRAME SIDE

NOTES:

1. SURFACES TO BE FLAT, WATER BOX SIDE TO BE FREE OF SCRATCHES

IN SEALING AREAS. SKIM IF NECESSARY.

2. CENTER CNC PROGRAM ON MATERIAL WHEN MACHINING.

C

JHG

1/2 1

DESCRIPTION

JHG 1SHEET OF

DO NOT SCALE DRAWING

ISSUED FOR PRODUCTION

TOLERANCES

.XXX `.001, .XX `.01

FRACTION `1/64

ANGLES `1_

r.001, b.001, f.001, c.001

THIRD ANGLE

PROJECTION

CHECKED BY

PROPERTY RIGHTS OF THIS DRAWING ARE CONVEYED TO BUREAU OF RECLAMATION. ANY USE OR REPRODUCTION WITHOUT WRITTEN PERMISSION IS PROHIBITED.

Brimhall Industrial, Inc.

SCALE

10398-04-DWG-01

QTY REQD

PRODUCTION

6 SEP 2023

DRAWN BY:UNLESS OTHERWISE SPECIFIED:

ALL DIMENSIONS IN INCHES [MM]

REMOVE ALL BURRS

BREAK EDGES .010-.020

SURFACE FINISH -

DRAWING NO.

DATE

APPROVED BY

GRISCOM-RUSSELL K-FIN COOLER

PARTS LIST / LIST OF MATERIALS

ZONE

TUBESHT, STA

SIZE

E. RIVERA

PROJECT NO.

D

C

1 10398-04 -04

B

REV

D

TUBE SHEET,

STATIONARY

9/8/23

A

REV

230409

Monte Vista, CO 81144

(719) 852-5070 - FAX (719) 852-2717

www.brimhallindustrial.com32

26 JUL 2023

8 SEP 2023

APPROVED

J. GARRARD/ER

DATE

QUALITY

B

UNS-C46400 NAVAL BRASS, 1/4 HARD, ASTM B171

D

ITEM PART NUMBER DESCRIPTION MATERIAL / SPECIFICATIONA

2 1

REVISIONS

2X 2 2X 9 1/4

5 EQ SP HOLES

2 5/16( )

2X 3 3/32

2X 22 3/4

8 EQ SP

HOLES

3 1/4( )

8X 1 8X 2 13/16

2X 6 3/16

4X 6 5/8

13 1/4

28 15/16

6 XR1 1/2

R4 1/2

5X 26 7/8

5X 1 1/32

10X n 7/8 x THRU16X 3/4-10 UNC-2B x 7/8 x 59/64 MAX DRILL

FLAT BOTTOM

COVER SIDE

3X 2 - 11.5 NPT

x 7/8

25 5/8

1 9/16( )

1 9/16

12 31/32 n3

1 3/8

7 5/8

1 3/8

18 1/2

1/22X

3/32

3/32( )

5 1/8

1 11/16

7 9/16 n2 13/16

6 1/2

116 ° n3

5 1 - 11.5 NPT x 7/8

8X 27/32 8X 12 1/4

2X 3

2X 22 3/4

8 EQ SP

HOLES

15/165X

3 1/4( )

5X 26 7/8

2 5/16( )

2X 2 11/32 2X 9 1/4

5 EQ SP HOLES

13 15/16

28 3/4

10x n 7/8 x THRU

16x n 7/8 x THRU

3X 2 - 11.5 NPT

x 7/8

TUBE SHEET SIDE

4.

3.

n2

1/26X

1 31/32 10 1 31/32( )

11/32n7 n2 13/16

2X 1 3/4

2X 1 11/16 3 3/8

5/8

1 - 11.5 NPT x 7/84X n 3/4 x THRU

5-1/2 BC

ALIGNED AS SHOWN

2.

4XØ3/4 X THRU AT 5-1/2 BC

ALIGNED AS SHOWN

n2 n7

2.

NOTES:

1. ORIGINAL PART IS CAST BRONZE, FUTURE

MANUFACTURING CAN BE WELDED STEEL.

2. INLET/OUTLET PIPES ARE 2" ID X 3" OD.

SPOTFACE BACKSIDE OF FLANGE HOLES

TO n1-3/8 IF A CASTING IS USED.

3. BEVEL AND RELIEVE INTERIOR PERIMETTER

AND DIVIDERS IF NECESSARY TO CLEAR

TUBES ON TUBE SHEET SIDE.

4. SPOTFACE BACKSIDE OF FRAME FLANGES

TO n1-1/2 IF A CASTING IS USED.

DRAWN BY:

REV

WATER BOX,

STATIONARY

A

DESCRIPTION

APPROVED

B

A

SCALE

PROJECT NO.

SHEET OF1

THIRD ANGLE

PROJECTION

Brimhall Industrial, Inc.

11 AUG 2023

SIZE

PRODUCTION

0D 10398-05-DWG-01

WTR BOX,STA

E. RIVERA

D

230409

B

REVISIONS

GRISCOM-RUSSELL K-FIN COOLER

DATE

C

Monte Vista, CO 81144

(719) 852-5070 - FAX (719) 852-2717

www.brimhallindustrial.com

DO NOT SCALE DRAWING

JHG

DATE

DRAWING NO.

-05

UNLESS OTHERWISE SPECIFIED:

ALL DIMENSIONS IN INCHES [MM]

REMOVE ALL BURRS

BREAK EDGES .010-.020

SURFACE FINISH -

CAST BRONZE

J. GARRARD

9/8/23

QTY REQD

ZONE

8 SEP 2023

REV

TOLERANCES

.XXX `.001, .XX `.01

FRACTION `1/64

ANGLES `1_

r.001, b.001, f.001, c.001

PROPERTY RIGHTS OF THIS DRAWING ARE CONVEYED TO BUREAU OF RECLAMATION. ANY USE OR REPRODUCTION WITHOUT WRITTEN PERMISSION IS PROHIBITED.

CHECKED BY

D

JHG

1/4

APPROVED BY

6 SEP 2023

ITEM PART NUMBER DESCRIPTION MATERIAL / SPECIFICATION

QUALITY

C

PARTS LIST / LIST OF MATERIALS

ISSUED FOR PRODUCTION

10398-05

7/16

WEB

2 5/16

5 1/167/16

WEB

2 11/32

3 7/8

7/16

2 11/32

7 1/16

7/16

1 1/16

1 1/16

2 5/16

5 1/16

B

B

AA

C

C

2 1/8

5 3/16

5/8

R3/16-1/4

INSIDE PASSAGEWAY

R 3/16 3/4

Section A-A

2 5/8

12 1/8

1/23X

3X 10 3/8

3X 2 5/83X 2 1/2

Section B-B n2 x 11/16 4X R3/16

1 1/42 1/8

1 11/16 1 3/4

Section C-C

2X 7 7/8

2X 13

2X 32X 31/32

2 21/328 5/82 21/32( )

4X R1/4

4X R3/8

6X R1/8

12X R1/2

4X 5/8-11 UNC-2B

x THRU

Monte Vista, CO 81144

(719) 852-5070 - FAX (719) 852-2717

www.brimhallindustrial.com

SEE SHEET 1

D

PROPERTY RIGHTS OF THIS DRAWING ARE CONVEYED TO BUREAU OF RECLAMATION. ANY USE OR REPRODUCTION WITHOUT WRITTEN PERMISSION IS PROHIBITED.

E. RIVERA

A

-05

THIRD ANGLE

PROJECTION

APPROVED

DATE

ITEM PART NUMBER DESCRIPTION MATERIAL / SPECIFICATION

JHG 2SHEET OF

UNLESS OTHERWISE SPECIFIED:

ALL DIMENSIONS IN INCHES [MM]

REMOVE ALL BURRS

BREAK EDGES .010-.020

SURFACE FINISH -

C

DATE

DRAWING NO.

PARTS LIST / LIST OF MATERIALS

PROJECT NO.

CHECKED BY

APPROVED BY

B

DESCRIPTION

GRISCOM-RUSSELL K-FIN COOLER

QTY REQD

TOLERANCES

.XXX `.001, .XX `.01

FRACTION `1/64

ANGLES `1_

r.001, b.001, f.001, c.001

SEE SHEET 1

A

DRAWN BY:

QUALITY

D

8 7

REV

REV

8 13

DO NOT SCALE DRAWING

C

11 AUG 2023

230409

SCALE

WATER BOX,

STATIONARY

ZONE

REVISIONS

B

1/4

D

6 SEP 2023

8 SEP 2023

10398-05-DWG-01

Brimhall Industrial, Inc.

J. GARRARD

PRODUCTION

SIZE

28 3/4

2 3/4

4 1/2

10 1/4

2 3/4

3X 2 3/4

3X 2 3/4

5 3/4 1 3/4

EXTERIOR SIDE

3X 1/2 - 14 NPT x THRU

3X 3/4 - 14 NPT x THRU

1.000`.015

2.313( )

2X 1.875 2X 4.625 (5 EQ SP HOLES) 1.875( )

.938( )

5X 26.875

5X .938

2X 3.000

2X 22.750

8 EQ SP HOLES

3.000( )

3.250( )

8X .875 8X 11.250 .875( )

26X Ø.875±.005

WATER BOX SIDE

5 11/32 1/2 1/2-13 UNC-2B x .750w118 ° x.875 MAX TAP DR

NOTES:

1. SURFACES TO BE FLAT, WATER BOX SIDE TO BE FREE OF SCRATCHES

IN SEALING AREAS. SKIM IF NECESSARY.

2. CENTER CNC PROGRAM ON MATERIAL WHEN MACHINING.

UNS-C46400 NAVAL BRASS, 1/4 HARD, ASTM B171

D

GRISCOM-RUSSELL K-FIN COOLER

Monte Vista, CO 81144

(719) 852-5070 - FAX (719) 852-2717

www.brimhallindustrial.com

230409

D

COVER,

STATIONARY

DO NOT SCALE DRAWING

D

JHG

ZONE

SIZE

QTY REQD

6 SEP 2023

C

DESCRIPTION

JHG

B

THIRD ANGLE

PROJECTION

B

CHECKED BY

C

UNLESS OTHERWISE SPECIFIED:

ALL DIMENSIONS IN INCHES [MM]

REMOVE ALL BURRS

BREAK EDGES .010-.020

SURFACE FINISH -

REV

TOLERANCES

.XXX `.001, .XX `.01

FRACTION `1/64

ANGLES `1_

r.001, b.001, f.001, c.001

10398-06-DWG-01

DATE

-06

REV

QUALITY

10398-06

ISSUED FOR PRODUCTION

PROJECT NO.

18 SEP 2023

PARTS LIST / LIST OF MATERIALS

SCALE

J. GARRARD

COVER, STA

DRAWING NO.

E. RIVERA

PROPERTY RIGHTS OF THIS DRAWING ARE CONVEYED TO BUREAU OF RECLAMATION. ANY USE OR REPRODUCTION WITHOUT WRITTEN PERMISSION IS PROHIBITED.

26 JUL 2023

DRAWN BY:

A A

DATE

Brimhall Industrial, Inc.

ITEM PART NUMBER DESCRIPTION MATERIAL / SPECIFICATION

SHEET OF

9/8/23

1/2

PRODUCTION

REVISIONS

APPROVED BY

APPROVED

"A" +0 / -1/32

14+0 -1/32

A

.95

10 GA (.1345)

2X2+0 -1/32

4X R1/8

Detail A

SCALE: FULL

NOTES:

1. FABRICATE ONE PANEL OF EACH LENGTH AS SHOWN IN THE DIMENSION TABLE.

DIMENSION TABLE

PART NO. DIM "A"

10398-07-1 103-1/2

10398-07-2 102-7/8

DESCRIPTION

ZONE

TOLERANCES

.XXX `.001, .XX `.01

FRACTION `1/64

ANGLES `1_

r.001, b.001, f.001, c.001

SHEET OF

ASTM A36 HOT ROLLED STEEL SHEET, 10 GA

DATE

REV

PANEL, SIDE

UNLESS OTHERWISE SPECIFIED:

ALL DIMENSIONS IN INCHES [MM]

REMOVE ALL BURRS

BREAK EDGES .010-.020

SURFACE FINISH -

CHECKED BY

C

D

QUALITY

-07-1

PANEL, SHT1

B

DRAWING NO.

9/8/23

ITEM PART NUMBER DESCRIPTION MATERIAL / SPECIFICATION

Monte Vista, CO 81144

(719) 852-5070 - FAX (719) 852-2717

www.brimhallindustrial.com

THIRD ANGLE

PROJECTION

REV

1/5 & NOTED

D

25 AUG 2023

DO NOT SCALE DRAWING 10398-07-DWG-01

PROJECT NO.

QTY REQD

APPROVED BY

ASTM A36 HOT ROLLED STEEL SHEET, 10 GA

PROPERTY RIGHTS OF THIS DRAWING ARE CONVEYED TO BUREAU OF RECLAMATION. ANY USE OR REPRODUCTION WITHOUT WRITTEN PERMISSION IS PROHIBITED.

E. RIVERA

8 SEP 2023

GRISCOM-RUSSELL K-FIN COOLER

DRAWN BY:

JHG

A

A

SIZE

PRODUCTION

D

B

SCALE

Brimhall Industrial, Inc.

PANEL, LG

REVISIONS

APPROVED

10398-07-1 -07-2

ISSUED FOR PRODUCTION

J. GARRARD

6 SEP 2023

10398-07-2

JHG

C

230409

PARTS LIST / LIST OF MATERIALS

"A"` 1/32

1 1/4

1/2

NOTES:

1. FABRICATE TWO BARS OF EACH LENGTH AS SHOWN IN THE DIMENSION TABLE.

DIMENSION TABLE

PART NO. DIM "A"

10398-08-1 102-1/2

10398-08-2 101-7/8

DIMENSION TABLE

PART NO. DIM "A"

10398-08-1 102-1/2

10398-08-2 101-7/8

BAR, STIFFENER,

LONG

ISSUED FOR PRODUCTION

REV

10398-08-2

DO NOT SCALE DRAWING

ASTM A36 HOT ROLLED STEEL FLAT, 1/2 X 1-1/4

DRAWN BY:

APPROVED BY

QTY REQDA

6 SEP 2023E. RIVERA

PROJECT NO.

APPROVED

REVISIONS

BAR,STIF,LG

ASTM A36 HOT ROLLED STEEL FLAT, 1/2 X 1-1/4

8 SEP 2023

UNLESS OTHERWISE SPECIFIED:

ALL DIMENSIONS IN INCHES [MM]

REMOVE ALL BURRS

BREAK EDGES .010-.020

SURFACE FINISH -

JHG

Brimhall Industrial, Inc.

-08-2

ZONE

GRISCOM-RUSSELL K-FIN COOLER

9/8/23

SHEET OF

B

-08-1

230409

DESCRIPTION

PARTS LIST / LIST OF MATERIALS

D

SCALE

D

DATE

B

JHG

QUALITY

10398-08-DWG-01

C

CHECKED BY

DRAWING NO.

D

REV DATE

PRODUCTION

PROPERTY RIGHTS OF THIS DRAWING ARE CONVEYED TO BUREAU OF RECLAMATION. ANY USE OR REPRODUCTION WITHOUT WRITTEN PERMISSION IS PROHIBITED. FULL

Monte Vista, CO 81144

(719) 852-5070 - FAX (719) 852-2717

www.brimhallindustrial.com

SIZE

TOLERANCES

.XXX `.001, .XX `.01

FRACTION `1/64

ANGLES `1_

r.001, b.001, f.001, c.001

10398-08-1

THIRD ANGLE

PROJECTION

25 AUG 2023

BAR,STIF,SHT

C

J. GARRARD

ITEM PART NUMBER DESCRIPTION MATERIAL / SPECIFICATION

A

105 1/16` 1/32

3/4

103 1/8± 1/16 (16 EQ SP HOLES) 31/32

6 7/8( )

16x n 5/8 x THRU

1 1/2( )

1 1/2( )

5/16( )

B

8 SEP 2023

10398-09-DWG-01

7 2

J. GARRARD

A

DATE

C

ANGLE, FRAME

REV

9/8/23

D

5 2

E. RIVERA

230409

UNLESS OTHERWISE SPECIFIED:

ALL DIMENSIONS IN INCHES [MM]

REMOVE ALL BURRS

BREAK EDGES .010-.020

SURFACE FINISH -

25 AUG 2023

TOLERANCES

.XXX `.001, .XX `.01

FRACTION `1/64

ANGLES `1_

r.001, b.001, f.001, c.001

DATE

SHEET OF

QTY REQD

APPROVED

D

ZONE

Brimhall Industrial, Inc.

PROJECT NO.

6 SEP 2023

DO NOT SCALE DRAWING 0

Monte Vista, CO 81144

(719) 852-5070 - FAX (719) 852-2717

www.brimhallindustrial.com

C

ISSUED FOR PRODUCTION

A

B

D

JHG

PARTS LIST / LIST OF MATERIALS

DRAWING NO.

PROPERTY RIGHTS OF THIS DRAWING ARE CONVEYED TO BUREAU OF RECLAMATION. ANY USE OR REPRODUCTION WITHOUT WRITTEN PERMISSION IS PROHIBITED.

REVISIONS

THIRD ANGLE

PROJECTION

-09

ASTM A36 HOT ROLLED STEEL ANGLE, 1-1/4 X 1-1/4 X 5/16 WEB

10398-09

SCALE

QUALITY

DESCRIPTION

FULL

ANGLE

GRISCOM-RUSSELL K-FIN COOLER

DRAWN BY:

PRODUCTION

1 1

SIZE

ITEM PART NUMBER DESCRIPTION MATERIAL / SPECIFICATION

REV

JHG

CHECKED BY

APPROVED BY

22 1/2+0 -1/32 2( )

2( )

SIZE

10398-10

D

PARTS LIST / LIST OF MATERIALS

9/8/23

C

Monte Vista, CO 81144

(719) 852-5070 - FAX (719) 852-2717

www.brimhallindustrial.com

BAR, FRAME,

FLOATING END, LG

REV

TOLERANCES

.XXX `.001, .XX `.01

FRACTION `1/64

ANGLES `1_

r.001, b.001, f.001, c.001

B

DRAWN BY:

JHG

D

QUALITY

REV

DATE

SCALE

A

E. RIVERA

QTY REQD

DESCRIPTION APPROVED

J. GARRARD

SHEET OF

PROJECT NO.

1 1

CHECKED BY

PROPERTY RIGHTS OF THIS DRAWING ARE CONVEYED TO BUREAU OF RECLAMATION. ANY USE OR REPRODUCTION WITHOUT WRITTEN PERMISSION IS PROHIBITED.

25 AUG 2023

DO NOT SCALE DRAWING

ZONE

D

ISSUED FOR PRODUCTION

UNLESS OTHERWISE SPECIFIED:

ALL DIMENSIONS IN INCHES [MM]

REMOVE ALL BURRS

BREAK EDGES .010-.020

SURFACE FINISH -

C

A

8 SEP 2023

APPROVED BY

DRAWING NO.

BAR

REVISIONS

DATE

FULL

JHG

THIRD ANGLE

PROJECTION

230409

6 SEP 2023

GRISCOM-RUSSELL K-FIN COOLER

-10

Brimhall Industrial, Inc.

10398-10-DWG-01

ITEM PART NUMBER DESCRIPTION MATERIAL / SPECIFICATION

PRODUCTION

ASTM A36 HOT ROLLED STEEL FLAT, 2 X 2

B

2( )

ZONE DATE

PARTS LIST / LIST OF MATERIALS

TOLERANCES

.XXX `.001, .XX `.01

FRACTION `1/64

ANGLES `1_

r.001, b.001, f.001, c.001

PROPERTY RIGHTS OF THIS DRAWING ARE CONVEYED TO BUREAU OF RECLAMATION. ANY USE OR REPRODUCTION WITHOUT WRITTEN PERMISSION IS PROHIBITED.

ASTM A36 HOT ROLLED STEEL FLAT, 2 X 2

DRAWN BY:

QUALITY

230409

DATE

C

GRISCOM-RUSSELL K-FIN COOLER

D

CHECKED BY

ITEM PART NUMBER DESCRIPTION MATERIAL / SPECIFICATION

SIZE PROJECT NO.

B

-11

DRAWING NO.

FULL8 SEP 2023

APPROVED

9/8/23

C

Monte Vista, CO 81144

(719) 852-5070 - FAX (719) 852-2717

www.brimhallindustrial.com

DO NOT SCALE DRAWING

B

QTY REQD

10398-11-DWG-01THIRD ANGLE

PROJECTION

25 AUG 2023

10398-11

D

J. GARRARD

PRODUCTION

UNLESS OTHERWISE SPECIFIED:

ALL DIMENSIONS IN INCHES [MM]

REMOVE ALL BURRS

BREAK EDGES .010-.020

SURFACE FINISH -

A

6 SEP 2023

REV

BAR, FRAME,

FLTG/STA END, SHT

Brimhall Industrial, Inc.

SHEET OF

BAR

JHGISSUED FOR PRODUCTION

REV

SCALE

A

E. RIVERA

D

DESCRIPTION

APPROVED BY

JHG

REVISIONS

R1 1/2

2X R1/2

2XR1/2

2X R1 3/8

3 1/4

R 13/16

6 1/8

3 1/16

2X R1/2

2X R1 1/4

80 °( )

2x n 7/8 x THRU n1 x THRU

1/4

5 59/64( )

5 1/2

2 3/4

2X 1 7/16

2X R1/2

B

QTY REQD

DATE

Monte Vista, CO 81144

(719) 852-5070 - FAX (719) 852-2717

www.brimhallindustrial.com

TOLERANCES

.XXX `.001, .XX `.01

FRACTION `1/64

ANGLES `1_

r.001, b.001, f.001, c.001

REV

J. GARRARD

FULL 1

APPROVED

B

REV

PRODUCTION

THIRD ANGLE

PROJECTION

CHECKED BY

Brimhall Industrial, Inc.

QUALITY

SIZE

02 AUG 2023

A

DESCRIPTION

SHEET OF

PARTS LIST / LIST OF MATERIALS

REVISIONS

ASTM A36 HOT ROLLED STEEL PLATE, 1/4" THK

BRACKET, LIFTING,

FLOATING END

DRAWN BY:

DATE

PROJECT NO.

-12

D

ITEM PART NUMBER DESCRIPTION MATERIAL / SPECIFICATION

6 SEP 2023

ISSUED FOR PRODUCTION

PROPERTY RIGHTS OF THIS DRAWING ARE CONVEYED TO BUREAU OF RECLAMATION. ANY USE OR REPRODUCTION WITHOUT WRITTEN PERMISSION IS PROHIBITED.

BKT,LFT,FLTG

D

C

10398-12-DWG-01

JHG

JHG

APPROVED BY

UNLESS OTHERWISE SPECIFIED:

ALL DIMENSIONS IN INCHES [MM]

REMOVE ALL BURRS

BREAK EDGES .010-.020

SURFACE FINISH -

230409

SCALE8 SEP 2023

E. RIVERA

DO NOT SCALE DRAWING

D

DRAWING NO.

C

9/8/23

A

GRISCOM-RUSSELL K-FIN COOLER

10398-12

ZONE

1/2 n.625`.005

5/8-11 UNC-2A

PRODUCTION

QTY REQD

DATE

B

APPROVED BY

A-13

PROJECT NO.

230409 10398-13-DWG-01

QUALITY

REV

D

C

Brimhall Industrial, Inc.

SHEET OF

REVISIONS

E. RIVERA

PIN, GUIDE

8 SEP 2023

J. GARRARD

ITEM PART NUMBER DESCRIPTION MATERIAL / SPECIFICATION

DRAWN BY:

6 SEP 2023

D

JHG

10398-13

APPROVED

D

DRAWING NO.

PIN, GUIDE,

FLOATING END

B

C

DATE

JHG

CHECKED BY

GRISCOM-RUSSELL K-FIN COOLER

SCALE

REV

3 1

DESCRIPTION

2X

9/8/23

A

MILD CARBON STEEL

25 AUG 2023

PROPERTY RIGHTS OF THIS DRAWING ARE CONVEYED TO BUREAU OF RECLAMATION. ANY USE OR REPRODUCTION WITHOUT WRITTEN PERMISSION IS PROHIBITED.

SIZE

ISSUED FOR PRODUCTION

PARTS LIST / LIST OF MATERIALS

Monte Vista, CO 81144

(719) 852-5070 - FAX (719) 852-2717

www.brimhallindustrial.com

DO NOT SCALE DRAWING

TOLERANCES

.XXX `.001, .XX `.01

FRACTION `1/64

ANGLES `1_

r.001, b.001, f.001, c.001

UNLESS OTHERWISE SPECIFIED:

ALL DIMENSIONS IN INCHES [MM]

REMOVE ALL BURRS

BREAK EDGES .010-.020

SURFACE FINISH -

THIRD ANGLE

PROJECTION

ZONE

24 1/2+0

2( )

UNLESS OTHERWISE SPECIFIED:

ALL DIMENSIONS IN INCHES [MM]

REMOVE ALL BURRS

BREAK EDGES .010-.020

SURFACE FINISH -

REV

DO NOT SCALE DRAWING

DATE

PARTS LIST / LIST OF MATERIALS

-14

QUALITY

DATEDRAWN BY:

D

DESCRIPTION

Monte Vista, CO 81144

(719) 852-5070 - FAX (719) 852-2717

www.brimhallindustrial.com

THIRD ANGLE

PROJECTION

QTY REQD

7 2

10398-14

APPROVED

ISSUED FOR PRODUCTION

8 SEP 2023 FULL

GRISCOM-RUSSELL K-FIN COOLER

DRAWING NO.

SHEET OF

Brimhall Industrial, Inc.

A

PRODUCTION

SCALE

D

TOLERANCES

.XXX `.001, .XX `.01

FRACTION `1/64

ANGLES `1_

r.001, b.001, f.001, c.001

REVISIONS

PROPERTY RIGHTS OF THIS DRAWING ARE CONVEYED TO BUREAU OF RECLAMATION. ANY USE OR REPRODUCTION WITHOUT WRITTEN PERMISSION IS PROHIBITED.

ASTM A36 HOT ROLLED STEEL FLAT, 2 X 2

10398-14-DWG-01

JHG

REV

BAR

25 AUG 2023

B

E. RIVERA

JHG9/8/23

B

230409APPROVED BY

ITEM PART NUMBER DESCRIPTION MATERIAL / SPECIFICATION

C

BAR, FRAME,

STATIONARY END, LG

ZONE

A

SIZE

PROJECT NO.

D

C

CHECKED BY

6 SEP 2023

J. GARRARD

-1/32 5/8( )

3 1/2( )

JHG

C

PARTS LIST / LIST OF MATERIALS

ITEM PART NUMBER DESCRIPTION MATERIAL / SPECIFICATION

ZONE

A

JHG

10398-15

J. GARRARD

DATE

D

ASTM A36 HOT ROLLED STEEL FLAT, 3-1/2 X 5/8

E. RIVERA

GRISCOM-RUSSELL K-FIN COOLER

DATE

SHEET OF

10398-15-DWG-01

8 4

DESCRIPTION

D

SCALE

Brimhall Industrial, Inc.

ISSUED FOR PRODUCTION

QTY REQD

BAR, FRAME SPACER,

STATIONARY END

D

A

6 SEP 2023

CHECKED BY

PROJECT NO.

BAR1

230409

-15

FULL

REV

QUALITY

3 2

DRAWN BY:

REVISIONS

TOLERANCES

.XXX `.001, .XX `.01

FRACTION `1/64

ANGLES `1_

r.001, b.001, f.001, c.001

REV

25 AUG 2023

APPROVED

SIZE

DO NOT SCALE DRAWING

C

Monte Vista, CO 81144

(719) 852-5070 - FAX (719) 852-2717

www.brimhallindustrial.com

B

UNLESS OTHERWISE SPECIFIED:

ALL DIMENSIONS IN INCHES [MM]

REMOVE ALL BURRS

BREAK EDGES .010-.020

SURFACE FINISH -

B

APPROVED BY

8 SEP 2023

DRAWING NO.

PRODUCTION

THIRD ANGLE

PROJECTION

9/8/23

PROPERTY RIGHTS OF THIS DRAWING ARE CONVEYED TO BUREAU OF RECLAMATION. ANY USE OR REPRODUCTION WITHOUT WRITTEN PERMISSION IS PROHIBITED. 1

FULL R` 1/16

n1

4` 1/32

2 3/8` 1/32

3 1/2 3 1/4

A

A

1.

3/4

Section A-A

NOTES:

1. WIDTH DEPENDS ON STOCK AVAILABLE, IF 3-1/4" IS NOT AVAILABLE, USE 3-1/2" WIDTH.

10398-16

25 AUG 2023

A

QUALITY

JHG

E. RIVERA

ZONE

GRISCOM-RUSSELL K-FIN COOLER

SCALE

B

THIRD ANGLE

PROJECTION

DATE

Monte Vista, CO 81144

(719) 852-5070 - FAX (719) 852-2717

www.brimhallindustrial.com

PROPERTY RIGHTS OF THIS DRAWING ARE CONVEYED TO BUREAU OF RECLAMATION. ANY USE OR REPRODUCTION WITHOUT WRITTEN PERMISSION IS PROHIBITED.

DATE

2X

DRAWN BY:

DESCRIPTION

ASTM A36 HOT ROLLED STEEL FLAT, 3/4 X 3-1/4 (OR 3-1/2)

DRAWING NO.

BRACKET, LIFTING,

STATIONARY END

C

APPROVED BY

C

D

PRODUCTION

SIZE

D

J. GARRARD

9/8/23

TOLERANCES

.XXX `.001, .XX `.01

FRACTION `1/64

ANGLES `1_

r.001, b.001, f.001, c.001

D

A QTY REQD

230409

-16

ISSUED FOR PRODUCTION

REV

Brimhall Industrial, Inc.

REV

CHECKED BY

10398-16-DWG-01

SHEET OF

BRACKET

6 SEP 2023

8 SEP 2023

UNLESS OTHERWISE SPECIFIED:

ALL DIMENSIONS IN INCHES [MM]

REMOVE ALL BURRS

BREAK EDGES .010-.020

SURFACE FINISH -

APPROVED

REVISIONS

DO NOT SCALE DRAWING

PARTS LIST / LIST OF MATERIALS

B

JHG

ITEM PART NUMBER DESCRIPTION MATERIAL / SPECIFICATION

PROJECT NO.

22.50

14.00

2X 1.156±.005 2X 19.125±.005 (10 HOLES EQ SP)

2.219`.005 3X 19.125±.005 (10 HOLES EQ SP)

2.125( )

2.219( )

1.156( )

10X 5.000±.005

10X 4.000±.005

10X 7.000±.005

10X 3.906±.005

10X 3.906±.005

5.000( )

50X Ø1.850±.005

.231( ).231( ) A

A

.875`.015

Section A-A

PARTS LIST / LIST OF MATERIALS

APPROVED

UNLESS OTHERWISE SPECIFIED:

ALL DIMENSIONS IN INCHES [MM]

REMOVE ALL BURRS

BREAK EDGES .010-.020

SURFACE FINISH -

JHG

THIRD ANGLE

PROJECTION

10398-17-DWG-01

9/8/23

GRISCOM-RUSSELL K-FIN COOLER6 SEP 2023

ASTM A36 HOT ROLLED STEEL PLATE

APPROVED BY

DO NOT SCALE DRAWING

-17ITEM PART NUMBER DESCRIPTION MATERIAL / SPECIFICATION

Brimhall Industrial, Inc.

SIZE

SHEET OF

QUALITY

10398-17

C

Monte Vista, CO 81144

(719) 852-5070 - FAX (719) 852-2717

www.brimhallindustrial.com

TOLERANCES

.XXX `.001, .XX `.01

FRACTION `1/64

ANGLES `1_

r.001, b.001, f.001, c.001

ISSUED FOR PRODUCTION

PROPERTY RIGHTS OF THIS DRAWING ARE CONVEYED TO BUREAU OF RECLAMATION. ANY USE OR REPRODUCTION WITHOUT WRITTEN PERMISSION IS PROHIBITED.

8 4

DESCRIPTION

D

CHECKED BY

D

B

230409

D

QTY REQD

DRAWN BY:

8 SEP 2023

1-1/2X

B

REV

E. RIVERA

DRAWING NO.

SUPPORT,

TUBE

DATE

C

PRODUCTION

REV

A

01 AUG 2023

REVISIONS

JHG

ZONE

J. GARRARD

A

PROJECT NO.

SUPPORT

SCALE

DATE

6 1

2X 1 5/8+1/8 -0

54 1/2` 1/16

110 1/4 +1/8 / -0 n1.000`.004

1 1/2` 1/16

A 6.

Ø1.800+.000 -.030

.065`.005

Detail A

SCALE: 2X

1. FIN MATERIAL: C110 COPPER, .015" THK

2. TUBE MATERIAL: C706 (90/10 CUNI) SB111, 1.000" OD X .065 AW X 110.250" L.

3. FIN STYLE: EDGE TENSION WOUND, SOLDER DIPPED, 7 (+1/-0) FPI.

4. COATING: LEAD FREE 95/5 TIN.

5. TUBE ENDS: SMOOTH

6. COLLARS: .020 THK X 1.5" L SST COLLAR IN LOCATION SHOWN.

7. HYDRO TESTING: 100% AFTER FINNING @ 150 PSIG FOR 1 MIN.

DRAWING NO.

SIZE

1/2 & NOTED

DATE

10398-18

230409

ISSUED FOR PRODUCTION

QTY REQD

SCALE8 SEP 2023

C

PARTS LIST / LIST OF MATERIALS

TUBE, COLLAR

J. GARRARD

TUBE,

WITH COLLAR

D

UNLESS OTHERWISE SPECIFIED:

ALL DIMENSIONS IN INCHES [MM]

REMOVE ALL BURRS

BREAK EDGES .010-.020

SURFACE FINISH -

TOLERANCES

.XXX `.001, .XX `.01

FRACTION `1/64

ANGLES `1_

r.001, b.001, f.001, c.001

D

SHEET OFJHG

C

50 SEE NOTES

PROJECT NO.

DESCRIPTION

REVISIONS

7 5

B

Monte Vista, CO 81144

(719) 852-5070 - FAX (719) 852-2717

www.brimhallindustrial.com

QUALITY

PRODUCTION

10398-18-DWG-01

PROPERTY RIGHTS OF THIS DRAWING ARE CONVEYED TO BUREAU OF RECLAMATION. ANY USE OR REPRODUCTION WITHOUT WRITTEN PERMISSION IS PROHIBITED.

REV

CHECKED BY

E. RIVERA

APPROVED BY

APPROVED

DRAWN BY:

ITEM PART NUMBER DESCRIPTION MATERIAL / SPECIFICATION

A

THIRD ANGLE

PROJECTION

9/8/230

SURFACE AIR COOLER

D

Brimhall Industrial, Inc.

DO NOT SCALE DRAWING

-18

JHG

REV

B

ZONE

A

6 SEP 2023

04 AUG 2023

2X 3 2X 22 3/4 (8 EQ SP HOLES)

3 1/4( )

2X 2 11/32

2X 9 1/4

EQ SP HOLES

2 11/32( )

13 15/16

3( )

15/165X 5X 26 7/8 15/16( )

28 3/4

2 2

8X 27/32

8X 12 1/4

27/32( )

10x n 7/8 x THRU

16x n 7/8 x THRU

1/8

DESCRIPTION

CHECKED BY

-19

A

ITEM PART NUMBER DESCRIPTION MATERIAL / SPECIFICATION

Brimhall Industrial, Inc.

QUALITY

6 1

SCALE

DATE

A

10398-19-DWG-01

GRISCOM-RUSSELL K-FIN COOLER

JHG 8 SEP 2023

APPROVED BY

SHEET OF

DO NOT SCALE DRAWING

REVISIONS

QTY REQD

25 AUG 2023

PROJECT NO.

4 1

TOLERANCES

.XXX `.001, .XX `.01

FRACTION `1/64

ANGLES `1_

r.001, b.001, f.001, c.001

PARTS LIST / LIST OF MATERIALS

J. GARRARD

B

DRAWN BY:

1/2

6 SEP 2023

C

GSKT, SPCR

DATE

230409

SYNTHETIC FIBER GASKET, NITRILE BINDER, 1/8" THK

UNLESS OTHERWISE SPECIFIED:

ALL DIMENSIONS IN INCHES [MM]

REMOVE ALL BURRS

BREAK EDGES .010-.020

SURFACE FINISH -

Monte Vista, CO 81144

(719) 852-5070 - FAX (719) 852-2717

www.brimhallindustrial.com

B

JHG

C

10398-19

ZONE

D

D

DRAWING NO.

APPROVED

GASKET,

STATIONARY SPACER

PROPERTY RIGHTS OF THIS DRAWING ARE CONVEYED TO BUREAU OF RECLAMATION. ANY USE OR REPRODUCTION WITHOUT WRITTEN PERMISSION IS PROHIBITED.

E. RIVERA

REV

THIRD ANGLE

PROJECTION

SIZE

9/8/23

REV

PRODUCTION

ISSUED FOR PRODUCTION

13 15/16

26 1/2

2X 1 3/4

.40

2X 1 3/45 49/64 2X .40

8 11/64

2X R3/8

2X R3/8

8X R3/8

COVER SIDE

7/8

3.094( )

5X 24 3/4

2X 9 EQ SP HOLES

3X 2 HOLES

7/8( )

27/32

3.062( )

9X 12 1/4

2X 5 EQ SP HOLES

7X 2 HOLES

27/32( )

TUBE SHEET SIDE

18X n 7/8 x THRU

6X n 7/8 x THRU

1/16

NOTES:

1. SURFACES TO BE FLAT AND FREE OF SCRATCHES

IN SEALING AREAS.

2. USE FLOATING COVER/WATER BOX AS A TEMPLATE.

Brimhall Industrial, Inc.

ISSUED FOR PRODUCTION

PARTS LIST / LIST OF MATERIALS

J. GARRARD 25 AUG 2023

10398-20

8 4

SHEET OF8 SEP 2023

-20

DESCRIPTION

DRAWING NO.

C

REV

TOLERANCES

.XXX `.001, .XX `.01

FRACTION `1/64

ANGLES `1_

r.001, b.001, f.001, c.001

APPROVED

SCALE

REV

ITEM PART NUMBER DESCRIPTION MATERIAL / SPECIFICATION

PROPERTY RIGHTS OF THIS DRAWING ARE CONVEYED TO BUREAU OF RECLAMATION. ANY USE OR REPRODUCTION WITHOUT WRITTEN PERMISSION IS PROHIBITED.

D

CHECKED BY

SIZE

E. RIVERA

230409

GRISCOM-RUSSELL K-FIN COOLER

JHG

QUALITY

A

D

DATEDRAWN BY:

Monte Vista, CO 81144

(719) 852-5070 - FAX (719) 852-2717

www.brimhallindustrial.com

SYNTHETIC FIBER GASKET, NITRILE BINDER, 1/16" THK

REVISIONS

GASKET,

FLOATING END

JHG

B

C

DO NOT SCALE DRAWING

ZONE DATE

QTY REQDA

UNLESS OTHERWISE SPECIFIED:

ALL DIMENSIONS IN INCHES [MM]

REMOVE ALL BURRS

BREAK EDGES .010-.020

SURFACE FINISH -

PROJECT NO.

9/8/23

D

PRODUCTION

6 SEP 2023

GASKET,FLTG

APPROVED BYTHIRD ANGLE

PROJECTION 1/2

B

10398-20-DWG-01

2X 2 11/32 2X 9 1/4 (5 EQ SP HOLES)

2 5/16( )

2X 3

2X 22 3/4

8 EQ SP HOLES

3 1/4( )

8X 27/32 8X 12 1/4

13 15/16

28 3/4 5X 26 7/8

15/165X

3( )

15/16( )

2 11/32( )

27/32( ) 16 x n 7/8 x THRU

10x n 7/8 x THRU WATER BOX SIDE

1/16

3X 2 1/4

3 7/8

.40

3X2 1/4

7 1/16

.40

2 21/32 2 3/4 2X .40

2X 2 21/322 3/42X .402X 1 1/16

12XR1/4

4XR1/4

4X R1/4

TUBE SHEET SIDE

NOTES:

1. SURFACES TO BE FLAT AND FREE OF SCRATCHES

IN SEALING AREAS.

2. USE FLOATING COVER/WATER BOX AS A TEMPLATE.

10398-21

10398-21-DWG-01

JHG

25 AUG 2023

UNLESS OTHERWISE SPECIFIED:

ALL DIMENSIONS IN INCHES [MM]

REMOVE ALL BURRS

BREAK EDGES .010-.020

SURFACE FINISH -

GASKET, WATER BOX,

STATIONARY

ISSUED FOR PRODUCTION

GASKET,STA

PROPERTY RIGHTS OF THIS DRAWING ARE CONVEYED TO BUREAU OF RECLAMATION. ANY USE OR REPRODUCTION WITHOUT WRITTEN PERMISSION IS PROHIBITED.

A

DATE

1/2

JHG

C

CHECKED BY

E. RIVERA

8 SEP 2023

8 5

DESCRIPTION

PROJECT NO.

PRODUCTION

ZONE

SCALE

DO NOT SCALE DRAWING

A

J. GARRARD

PARTS LIST / LIST OF MATERIALS

DATE

6 SEP 2023

SIZE

SYNTHETIC FIBER GASKET, NITRILE BINDER, 1/16" THK

GRISCOM-RUSSELL K-FIN COOLER

ITEM PART NUMBER DESCRIPTION MATERIAL / SPECIFICATION

TOLERANCES

.XXX `.001, .XX `.01

FRACTION `1/64

ANGLES `1_

r.001, b.001, f.001, c.001

APPROVED

-21

SHEET OF

D

Monte Vista, CO 81144

(719) 852-5070 - FAX (719) 852-2717

www.brimhallindustrial.com

REV

REV

C

9/8/23

DRAWN BY:

D

Brimhall Industrial, Inc.

THIRD ANGLE

PROJECTION

QTY REQD

REVISIONS

DRAWING NO.

D

B

230409

B

QUALITY

APPROVED BY

2X 2 2X 9 1/4 (5 EQ SP HOLES)

2 5/16( )

2X 3 3/32

2X 22 3/4

8 EQ SP HOLES

3 1/4( )

8X 1/2 8X 11 1/4

13 1/4

28 15/16 5X 26 7/8

5X1 1/32

3 3/32( )

1 1/32( )

2( )

1( ) 16 x n 7/8 x THRU

10x n 7/8 x THRU COVER SIDE

1/16

3X 2 11/32

3 7/8

.40

3X 2 11/32

7 1/16

.40

2 5/16 2 3/4 2X .40

2X 2 5/162 3/42X 0.402X 1 1/16

12X R1/4

4X R1/8

4X R1/4

WATER BOX SIDE

NOTES:

1. SURFACES TO BE FLAT AND FREE OF SCRATCHES

IN SEALING AREAS.

2. USE FLOATING COVER/WATER BOX AS A TEMPLATE.

SCALE

GASKET, COVER,

STATIONARY

-22

GASKET,STA

ITEM PART NUMBER DESCRIPTION MATERIAL / SPECIFICATION

9/8/23

APPROVED

QTY REQD

DO NOT SCALE DRAWING

25 AUG 2023

PROJECT NO.

A

D

SIZE

SYNTHETIC FIBER GASKET, NITRILE BINDER, 1/16" THK

D

1/2

QUALITY

B

8 SEP 2023

C

10398-22

THIRD ANGLE

PROJECTION

Monte Vista, CO 81144

(719) 852-5070 - FAX (719) 852-2717

www.brimhallindustrial.com

B

D

E. RIVERA

A

APPROVED BY

TOLERANCES

.XXX `.001, .XX `.01

FRACTION `1/64

ANGLES `1_

r.001, b.001, f.001, c.001

PARTS LIST / LIST OF MATERIALS

JHG

DRAWING NO.

ISSUED FOR PRODUCTION

SHEET OF

J. GARRARD

REVISIONS

UNLESS OTHERWISE SPECIFIED:

ALL DIMENSIONS IN INCHES [MM]

REMOVE ALL BURRS

BREAK EDGES .010-.020

SURFACE FINISH -

REV

230409

PRODUCTION

DATE

DESCRIPTION

10398-22-DWG-01

C

DATE

JHG

6 SEP 2023

PROPERTY RIGHTS OF THIS DRAWING ARE CONVEYED TO BUREAU OF RECLAMATION. ANY USE OR REPRODUCTION WITHOUT WRITTEN PERMISSION IS PROHIBITED. 1

REV

CHECKED BY

DRAWN BY:

ZONE

Brimhall Industrial, Inc.

GRISCOM-RUSSELL K-FIN COOLER