Updated_AMD_0002_Attachment_A_Specifications_0002.pdf

CRSP SCADA Sandbox Programmable Controller and Software

Upper Colorado Basin Region

CRSP SCADA Sandbox Programmable Controller and So�ware

U.S. Department of the Interior

Bureau of Reclamation

Upper Colorado Basin

Salt Lake City, Utah bmurphy Inserted Text luatil

Upper Colorado Basin Region

1.0 BACKGROUND:

The Bureau of Reclama�on is a water management agency overseeing 600 dams in 17 western states. Renowned for construc�ng dams, power plants, and canals, notable projects include Hoover Dam on the Colorado River, Grand Coulee Dam on the Columbia River, and Folsom Dam on the American River. Reclama�on is the largest wholesaler of water in the United States and the second-largest producer of hydroelectric power in the western U.S., organized into five regions, including the Upper Colorado Basin.

2.0 INTRODUCTION:

The Upper Colorado Basin (UCB) Region is seeking to purchase a programmable logic controller, associated modules, and so�ware for the inclusion into the CRSP SCADA sandbox. The specifica�on and system design are based on Rockwell Automa�on’s 1756 ControlLogix pla�orm. The equipment provided shall be the latest newly manufactured, pre-installed with the latest stable firmware version. EQUAL products that meet or exceed the specified product’s technical specifica�ons and the requirements listed with in this specifica�on will be considered.

3.0 REQUIREMENTS:

3.1 Environmental Durability

• In accordance with IEC 61131-2 standards for programmable controllers.

• Operating Temperature: 0°C to 60°C (32°F to 140°F)

• Storage Temperature: -40°C to 85°C (-40°C to 185°F)

• Humidity: 5-95% non-condensing

• Ingress Protection: IP20

• Shock and Vibration: Modules shall be compliant with IEC 60068.

3.2 Performance Specifica�ons

• Cycle Time and Determinism: Shall support a scan cycle time of 10ms or better.

• Real-Time Diagnostics: shall provide real-time diagnostics for monitoring network health, I/O performance, and identifying fault conditions at the module level.

• Timestamping: resolution of 1ms

• Data Retention: Event logs shall provide export or transfer to external logging systems for a minimum 30-day retention.

Upper Colorado Basin Region

3.3 Time Synchroniza�on

• Supported Protocols: Shall support Precision Time Protocol (PTP) (IEEE 1588) and

Network Time Protocol (NTP) for time synchronization.

• Precision: Must be +/- 1ms precision for time-stamping capabilities across modules.

3.4 Protocol Support

• EtherNet/IP: Shall support EtherNet/IP in accordance with IEC 61158 for industrial communication networks.

• DNP3 (serial and ethernet): Support DNP3 protocol natively or via a compatible communication module.

3.5 Modular Design

• Chassis Capacity: Standard 7-slot chassis to allow modular expandability and accommodate additional modules as needed.

• Hot Swappable: Hot swappable I/O modules.

• Backplane shall provide at a minimum of 2Mbps inter-module communication data transfer rate.

• Removable terminal blocks shall be provided to allow for a flexible interconnection between plant wiring and I/O modules. Terminal blocks shall be provided with screw-clamp connections.

3.6 Cybersecurity

• Access Control: shall provide integrated role-based access control (RBAC) to restrict access by user roles and permissions.

• Encryption Standards: Built-in AES-256 encryption for EtherNet/IP communication to secure data in transit.

• Patch Management: Shall support secure firmware patching via Rockwell’s

ControlFLASH or equivalent.

• Logging and Audit: shall support detailed logging and audit trails for user actions, configuration changes, and access attempts.

3.7 Support and Warranty

• Warrant Period: minimum 3-year warranty on all modules and components, covering parts and labor.

• Firmware and Software updates: Manufacturer shall provide regular firmware and software updates, and security patches for all modules.

bmurphy Highlight

Upper Colorado Basin Region

3.8 Addi�onal Considera�ons

• Documentation: Each component shall include full technical documentation, including wiring diagrams, installation guides, and operating manuals.

• Compliance: UL and CE certifications shall be provided.

• Industrial Certification: Components shall meet IEC 61131-2 for programmable controllers in industrial applications.

• Vendor shall provide assurance of spare parts availability for a minimum of 10 years.

4.0 PRODUCTS:

All components, including the controller, power supply, communica�on modules, I/O modules, and so�ware shall be manufactured by the same vendor and be part of the same pla�orm family. This ensures interoperability, reduces maintenance complexity, and supports seamless integra�on. The ProSo� DNP3 Master/Slave Network Interface Module is the only permissible excep�on, or equivalent DNP3 communica�ons module.

Ensure full compa�bility and uniform func�onality across all modules and accessories. Each component shall be na�vely compa�ble and fully supported within the ControlLogix environment, elimina�ng the need for third-party adapta�ons or compa�bility workarounds.

The following products are specified as the basis for design and performance standards.

Equivalent products shall meet or exceed the specified product’s technical specifica�ons and the listed requirements below each.

4.1 1756-L81E, 3MB Controller

Quan�ty: 2 EA Part Number: 1756-L81E Configura�on -

Nonvola�le Memory: 3MB Ports: 1-Ethernet (10/100/1000Mbps), 1-USB 2.0.

Communica�ons: EtherNet/IP, DeviceNet, ControlNet.

Programming Languages: Relay ladder, structured text, func�on block, and sequen�al func�on chart (SFC) Redundancy: Support for controller redundancy.

4.2 1756-A7, 7-Slot Chassis

Quan�ty: 5 EA Part Number: 1756-A7 Configura�on –

Slot Configura�on: 7-slot

Upper Colorado Basin Region

Moun�ng: Back-panel moun�ng

4.3 1756-N2, Blank Slot Fillers

Quan�ty: 6 EA Part Number: 1756-N2 Configura�on – Provide slot fillers to cover any spare slots from dust and debris.

4.4 1756-OF8, 8-Channel Analog Output Module

Quan�ty: 5 EA Part Number: 1756-OF8 Configura�on –

Outputs: 8 common return voltage/current analog outputs Ra�ng: +/- 10VDC or 0-20mA Resolu�on: 15 bits across 10.4V/21mA

4.5 1756-OH8I, Isolated 8-Channel Digital Output Module

Quan�ty – 17 EA Part Number: 1756-OH8I Configura�on -

Outputs: 8 isolated digital outputs Voltage Category: 125V DC Ra�ngs: 90-146VDC externally sourced, 2A con�nuous per point.

4.6 1756-IH16I, Isolated 16-Channel Digital Input Module

Quan�ty: 5 EA Part Number: 1756-IH16I Configura�on-

Inputs: 16 isolated digital inputs, with so�ware configurable state change defini�on Voltage Category: 125V DC Ra�ngs: 90-146VDC

4.7 1756-EN2TR, EtherNet/IP Communica�on Module

Quan�ty: 5 EA Part Number: 1756-EN2TR Configura�on –

Ports: 2, copper Communica�on Rate: 10/100 Mbps TCP/IP Connec�ons: 128

Upper Colorado Basin Region

4.8 1756-PA75, Power Supply

Quan�ty – 6 EA Part Number: 1756-PA75 Configura�on –

Voltage Category: 120V/240V AC Input Ra�ng: 120VAC, 100W, 60Hz Output Ra�ng: 75W max Inrush: 20A max inrush

4.9 1756-TBNH, Terminal Block for Analog Cards

Quan�ty – 4 EA Part Number: 1756-TBNH Configura�on –

Descrip�on: Removable terminal block, 20 posi�on NEMA screw clamp block for analog circuits. Single wire connec�ons, 22-14 AWG solid or stranded shielded copper wire rated 105°C.

4.10 1756-TBCH, Terminal Block for all other Cards

Quan�ty – 20 EA Part Number: 1756-TBCH Descrip�on – 36-pin cage-clamp removable terminal block. Single wire connec�ons, 22-14

AWG solid or stranded shielded copper wire rated 105°C.

4.11 9324M-RLDT80, Studio 5000 Full Edi�on, perpetual license.

Quan�ty – 2 EA Part Number: 9324M-RLDT80 License Type: Perpetual Descrip�on – Provide a perpetual license for Rockwell Automa�on Studio 5000 Full Edi�on

(9324M-RLTD80), or equivalent, with func�onality for configura�on, programming, valida�on, tes�ng, and op�miza�on of all applica�on code.

4.12 9509-USB-DONG2, Ac�va�on Dongle Quan�ty – 2 EA Park Number: 9509-USB-DONG2 Descrip�on – Provide a portable hardware device that stores so�ware licenses allowing users to ac�vate and run the so�ware on any computer which the dongle is connected to, Upper Colorado Basin Region

4.13 MVI56-DNP, Proso� DNP 3.0 Master/Slave Network Interface Module

Quan�ty – 2 EA Part Number: MV156-DNP Descrip�on – DNP 3.0 module to allow the controller processor to interface with devices over the DNP protocol. Compa�ble with the backplane of the proposed controller. Provides two DNP protocol ports capable of being configured as Master/Slave or Slave/Slave.

5.0 DELIVERY:

All items shall be delivered to the address listed below. Each delivery shall include a detailed packing list and contact informa�on for post-delivery support.

Denver Federal Center Ship to: US Bureau of Reclamation 6th Ave and Kipling St Bldg 56, Room 2730 Denver, CO 80225

Submission Instructions to Offerers:

Review all attachments:

• Clauses and Provisions - Pay close attention to highlighted sections.

• Attachment A Specifications

• Incomplete quotes will be considered non responsive.