B09_Amend_01_Specifications_Revised_0001.pdf

Klondike Gold Rush National Historical Park 102 Broadway

Skagway, Alaska 99840

Supply

Telehandler

NATIONAL PARK SERVICE

REGION 11 ALASKA

National Park Service, Klondike Gold Rush National Historical Park

Technical Specifications Attachment

Revised at Amendment 01

General Description of Needed Materials: The National Park Service requires a telehandler capable of performing a wide range of material‑handling and elevated placement tasks in support of maintenance, construction, and facility operations. The equipment must include a telescoping boom capable of lifting, extending, and positioning loads at various heights and reaches, with sufficient capacity to handle palletized materials, structural components, and other operational supplies. The telehandler shall be delivered with forks but must be compatible with multiple attachments—such as, buckets, and approved personnel‑handling platforms—to ensure flexibility across diverse jobsite conditions, including uneven and rough terrain.

To ensure maneuverability in constrained or variable work environments, the telehandler must feature multiple steering configurations, including front‑wheel steering for stable travel, four‑wheel steering for reduced turning radius in tight areas, and crab steering for precise lateral alignment alongside structures or obstacles. The equipment should provide accurate boom control, operator visibility, an enclosed cab with heater and overall stability necessary for safe and efficient material placement. This capability is essential to meet ongoing operational demands and to support facility management requirements across the park’s built and natural environments.

Telehandler may be previously used with less than 2000 hours if accompanied with a certified letter from a credentialled mechanic certifying a thorough inspection and record that all safety inspections and required maintenance has been preformed prior to award. This certification letter for used equipment is required after award selection notification, and prior to actual award release.

To qualify for consideration, each of the following specifications (Sections 1.1 thru 1.6) shall be met or bettered. Package shall be delivered to Klondike Gold Rush National Park, Skagway, Alaska, fully assembled and ready for operation.

1. Minimum Equipment Salient Characteristics:

1.1. Telehandler Measurements:

1.1.1. Overall length: Approximately 17’5”–20’5” (tractor only, excluding forks)

1.1.2. Overall width: Maximum 96”

1.1.3. Height: Maximum 95” to top of ROPS

1.1.4. Wheelbase: Approximately 11’ – 12’

1.1.5. Ground clearance: Minimum 1’3”

1.1.6. Operating weight: Target 17,600 lbs (tractor only), but flexible on this.

1.1.7. Turning radius: 13’4”

Fully extended boom lengths for height and reach must meet or exceed the following:

1.1.8. Lift Height: 34’ – 36’ or better.

1.1.9. Forward Reach: 21’11”

1.1.10. Minimum for Maximum Reach at Maximum Height: 1’10”

1.2. Telehandler engine/performance:

1.2.1. Diesel engine, liquid-cooled

1.2.2. Horsepower: Minimum 74 HP gross

1.2.3. Engine compliant with current EPA non-road diesel emissions standards

1.2.4. Fuel system compatible with ultra-low sulfur diesel

1.2.5. Fuel tank capacity: Minimum 27 gallons

1.2.6. Engine protection systems to include:

Oil pressure monitoring Coolant temperature monitoring

1.2.7. High-capacity air filtration system suitable for dusty environments

1.2.8. Lifting capacity: Minimum 6000 lbs

1.3. Tractor electrical:

1.3.1. 12-volt electrical system

1.3.2. Alternator 95 amp, with sufficient output for lighting and accessories

1.3.3. Battery sized appropriately for cold weather starting

1.3.4. Instrument display to include:

• Engine temperature

• Fuel level

• Hour meter

• Warning indicators

1.4. UV safety:

1.4.1. Roll over protect system (ROPS) fixed

1.4.2. Seatbelt, retractable

1.4.3. Neutral start safety system

1.4.4. Horn

1.4.5. Windshield wipers

1.4.6. Parking brake

1.5. Operator compartment:

1.5.1. Rigid fully enclosed cab

1.5.2. Lockable doors

1.5.3. Adjustable operator seat with suspension

1.5.4. Ergonomic control layout

1.5.5. Cup holder and basic storage

1.5.6. Clear visibility to loader and work area

1.5.7. Heated

1.6. Attachments:

1.6.1. Pallet Forks- 2x4x60L preferred, down to 48”L acceptable”

* Auxiliary hydraulics and universal coupler are not required.

**Machine to come turnkey and ready to operate all attachments

2. Manuals: One printed copy each of operator’s, service, and parts manuals for Utility Work Machine as well as attachments, and a single digital copy of all, shall be shipped to the delivery address at the time of purchase.

3. Warranty:

Manufacturer’s or “Certified Used” full coverage shall include, at a minimum:

3.1 Engine

All internal lubricated components, fuel system components, cooling system components, sensors, wiring harnesses, and control modules.

3.2 Transmission / Drivetrain

Transmission, hydrostatic drive components, axles, differentials, driveshafts, and steering components.

3.3 Hydraulic System

Hydraulic pumps, valves, cylinders, hoses, and fittings.

3.4 Electrical Components

Battery, alternator, wiring harnesses, switches, and instrument panel.

3.5 Structural Components

Frame, loader arms, ROPS, and mounting components.

Warranty period shall be no less than 24 months or 1,500 hours, whichever occurs first. Start time/hours begin at delivery/acceptance. Warranty service shall be performed by certified technicians using OEM or equivalent parts. Units to be factory tested to design specifications at full load conditions and all protective devices and control functions simulated and checked, can be satisfied during the maintenance certification process. All warranties to be performed by manufacturers certified technician using OEM or equivalent parts.

Shipping and Delivery:

Entire package shall be prepped for barge or overland shipment. Complete FOB shipping address shall be to: The National Park Service, Klondike Gold Rush NP, 102 Broadway Street, Skagway, Alaska 99840. Point of contact for delivery to be provided at time of award. Delivery days and hours are Monday- Friday 7am-4pm. Deliver by no later than 3/31/2027.