Sol_140P8623Q0068_Amd_0002.pdf

(x)

140P8623Q0068 x x

1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted ; or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGEMENT TO BE

RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR

OFFER. If by virtue of this amendment you desire to change an offer already submitted , such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

x

PPG

San Francisco CA 94123 Building 201, Fort Mason

NPS, PWR - GOGA MABO

07/07/20230002

13. THIS ITEM ONLY APPLIES TO MODIFICATION OF CONTRACTS/ORDERS. IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

12. ACCOUNTING AND APPROPRIATION DATA (If required) is not extended.is extended, Items 8 and 15, and returning

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended , by one of the following methods: (a) By completing

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

FACILITY CODE CODE

10B. DATED (SEE ITEM 13)

10A. MODIFICATION OF CONTRACT/ORDER NO.

9B. DATED (SEE ITEM 11)

9A. AMENDMENT OF SOLICITATION NO.

CODE

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code)

7. ADMINISTERED BY (If other than Item 6)CODE 6. ISSUED BY

PAGE OF PAGES

4. REQUISITION/PURCHASE REQ. NO.3. EFFECTIVE DATE2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO. (If applicable)

1. CONTRACT ID CODE

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

06/27/2023

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority) appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

E. IMPORTANT: Contractor is not is required to sign this document and return __________________ copies to the issuing office.

ORDER NO. IN ITEM 10A.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

Update Three Law Enforcement vehicles, NPS-SEKI

Amendment 0002 is issued to provide answers to questions submitted by interested vendors and Attachment No. 06 - Pictures.

Question 1: Will you please find out if freestanding brackets for the Setina cargo box to make it compatible with a Pro-guard rear partition will be provided or need to be manufactured?

Answer 1: Attached a picture of the bracket kit for the Setina cargo box. The brackets are supposed to mount to the floor of the trunk area and raise the cargo box off the floor. I

Continued ...

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)15A. NAME AND TITLE OF SIGNER (Type or print)

15C. DATE SIGNED 16B. UNITED STATES OF AMERICA 15B. CONTRACTOR/OFFEROR 16C. DATE SIGNED

(Signature of person authorized to sign) (Signature of Contracting Officer)

Liset Gomez

STANDARD FORM 30 (REV. 11/2016)

Prescribed by GSA FAR (48 CFR) 53.243

Previous edition unusable

Except as provided herein, all terms and conditions of the document referenced in Item 9 A or 10A, as heretofore changed, remains unchanged and in full force and effect .

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

NAME OF OFFEROR OR CONTRACTOR

2 2

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

(A) (B) (C) (D) (E) (F)

140P8623Q0068/0002 don't believe there is a bracket to secure the cargo box to the rear partition. If that is required, it will need to be fabricated. Possibly an angle iron bracket mounted on top of the box and bolted to the rear partition will suffice.

Question 2: Can you provide a Proof or picture of what the graphics look like to determine installation time?

Answer 2: The vehicle graphics have already been added to one of the vehicles last fall. See attached photo of graphics layout. So only two of the vehicles will need graphics.

Question 3: Is there a possibility of using vehicle specific mounts for the Radar components instead of Velcro?

Answer 3: Yes, those have been ordered and will be included with all installation equipment. Only one vehicle (0529Y) will have a radar unit. The

OBD-II cable is no longer compatible with 2021+

Ford Interceptors so a hard wire kit will be included (Stalker Radar stated that they were told by NHTSA to stop using them on 2021 and up models).

Radar (front) will be mounted to the dash with this mount:

https://www.stalkerradar.com/product/2020-present-ford-interceptor-suv-combination-dash-mount/

Rear sensor mount:

https://www.stalkerradar.com/product/2020-present-ford-interceptor-suv-rear-antenna-mount/

All other terms and conditions remain unchanged.

Period of Performance: 07/17/2023 to 09/29/2023

Mr. Dave Fox is designated as the NPS representative responsible for certifying receipt and acceptance of services rendered.

NSN 7540-01-152-8067 OPTIONAL FORM 336 (4-86)

Sponsored by GSA

FAR (48 CFR) 53.110