B08_Attachment_5_140P8422Q0131_Site_Visit_Attendees_and_Q-A_0001.pdf

140P8422Q0131 Replace Electrical Panel at Visitor Center

Channel Islands National Park

Site Visit Attendees

Questions and NPS Responses

Attended Site Visit on August 17, 2022

1:00 p.m.

Brian M. Alston My Electrician Inc.

800‐342‐6885 office 858‐386‐6510

Eduardo Gonzalez, Project Manager G & H Electric 619‐882‐6741

Attended Site Visit on August 18, 2022

9:00 a.m.

Allen Shabilla, President W E S T Development, Inc.

760‐504‐3845

3:00 p.m.

Fredrick Petterson, Proposal Coordinator Talon Veteran Services 540‐526‐0002

Attended Site Visit on August 23, 2022

2:00 p.m.

Evan Michie M4 Builders 805‐218‐2840

Omar S. Equihua, CEO Western Electrical Contracting, Inc.

619‐246‐0387

140P8422Q0131, Site Visit Attendees and Q&A

Questions and NPS Responses:

1. To replace the breaker in the main gear, can we do a shut down during normal business hours, or would this be after hours?

NPS Response: Either would be acceptable to NPS with advance notification. Any shutdown during normal business hours will need to be scheduled in advance and approved through park management. Night work may be performed only with prior consent of the CO with concurrence by park management.

2. The feed for panel "D" is bottom fed, and for a new panel new conduit will have to be installed, do we have access above the ceiling to run new conduit back to the main switchgear?

NPS Response: Yes, access is available.

3. Will we be able to work during normal business hours, or will we have to work after the visitor's center is closed?

NPS Response: All service interrupted work can take place during business hours, with all service interruptions being coordinated and scheduled in advance and approved through park management.

Night work may be requested by the Contractor but may only be performed with prior consent of the

CO with concurrence by park management.