Attch_1_-_Specifications.pdf
PDF 366 KB Posted
- Attached to
- Katherine Landing FW Replacement Pumps - LAKE
- Solicitation number
- 140P8124Q0072
About this file
This document appears to be a technical specification for the replacement of two finished water pumps and motors at the Katherine Landing facility in the Lake Mead National Recreation Area. The scope of work includes supplying new 40 HP, 3-phase, 230/460V motors and 3-stage, 350 GPM @ 240 FT head pumps that interface with the existing electrical controls and plumbing. The new equipment must match the performance and size of the existing pumps. The contractor is required to deliver the equipment to the site within 120 days after receipt of the order. No installation is required under this contract. The solicitation number is 140P8124Q0072, and the procuring agency is the Department of the Interior's National Park Service Pacific West Region.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Sol_140P8124Q0072_Amd_0001.pdf | ||
| Sol_140P8124Q0072.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Specifications
Lake Mead National Recreation Area – KL FW Replacement Pumps
1. DESCRIPTION
A. Finished Water pumps at Katherine Landing have outlived their useful life. The purpose of this contract is to replace the Pump and Motor Equipment. Current Pumps/ Motors to be replaced are the following:
1. Qty 2, 40 Horsepower, 3 phase, 230/460 volts, 3560 rpm US Electrical motors, Sealed Bearings, no grease zerks. Model 6212-JC3
2. Qty 2, Peerless 8LB S/N 572434A, 575434B, 3 stage, 350 gpm @ 240 feet head, 6x6x12, Impeller dia 5.26x5.94, Impeller number 2626464 / LC
3. Mechanical seals for above.
B. The scope of work for this contract consists of:
1. Supply New pumps and Motors and seals
2. Deliver the equipment to Lake Mead National Recreation Area. Address to be provided.
C. The Contractor shall provide all materials necessary to complete the replacement of two pump and motor assemblies located at the Katherine landing Drinking water facility.
The new pumps and motors must match performance and size of old pumps. New pumps must interface with existing electrical controls and plumbing assemblies.
2. DELIVERY REQUIREMENTS
A. Deliver the equipment to the following address:
Lake Mead National Recreational Area 101 Katzenbach Dr Boulder City, NV 89005
B. On or before 120 days after receipt of order.
C. Delivery costs shall be accounted for in the unit prices of the quoted items. Delivery costs shall not be quoted as a separate item.
D. No installation of the product will be required under this contract.
3. REQUIRED ITEMS
A. Required Items – The items below are examples of acceptable products. Other products may be quoted as long as the meet the specifications below.
CLIN Item description Qty Unit
Peerless 8LB S/N 572434A, 575434B, 3 stage, 350 gpm @ 240 feet head, 6x6x12, Impeller dia 5.26x5.94, Impeller number 2626464 / LC
2 Each
40 Horsepower, 3 phase, 230/460 volts, 3560 rpm US Electrical motors, Sealed Bearings, no grease zerks.
Model 6212-JC3
2 Each
3 Mechanical seals, coupler, shaft 2 Each
B. Pumps shall be 3 stage, 350 gpm @ 240 feet head, 6x6x12, Impeller dia 5.26x5.94.
Motors shall be 40 Horsepower, 3 phase, 230/460 volts, 3560 rpm, Sealed Bearings, no grease zerks.
1. Supply new pump/motors and seals
2. Pumps and motors shall be assembled with mechanical seals in place and adjusted.
3. Deliver or ship the equipment to Lake Mead National Recreation Area.
Address to be provided.
C. The Units should have the following characteristics:
1. Motors will have sealed bearings
2. Motors will be high efficiency
3. Pumps will be rated for 350 gpm @240’ TDH
4. Must interface with existing electrical controls and plumbing assemblies
Pumps to be replaced looking North
Pump Connections
Roof access for removing pumps with a crane.
Motor Plate
File details come from the government source that posted it. Updated .