DRTO_Solicitation_140P5424Q0036_Questions_and_Responses_0001.pdf
PDF 132 KB Posted
- Solicitation number
- 140P5424Q0036
About this file
This document contains the questions and responses for a solicitation issued by the National Park Service Southeast Region for the procurement of mooring line assemblies, vessel mooring buoys, and round yellow regulatory buoys for Dry Tortugas National Park (DRTO).
The key details are:
- The total quantity required is 17 boundary buoys, clarifying a discrepancy in the original solicitation documents.
- The mooring system scope requires 30% additional rope over the vertical depth of the water.
- Van Beest Green Pin hardware is an acceptable substitute for the specified US hardware.
- The solicitation number is 140P5424Q0036 and the opportunity type is a solicitation.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
QUESTIONS AND RESPONSES
DRY TORTUGAS NATIONAL PARK – PROCURE MOORING LINE ASSEMBLIES, VESSEL
MOORING BUOYS, AND ROUND YELLOW REGULATORY BUOYS – 140P5424Q0036
Note: The following questions were received prior to the deadline for questions which was 07/19/2024 at 12:00PM EST as per the solicitation.
1. Project calls for 17 2CFR boundary buoys but Table 2 only shows 16-can you please clarify the quantity of 2CFR buoys?
The total quantity required is 17. The Boundary Buoy Q data was missing from Table 2. Please see the updated Table 2 in the Performance Specification.
2. Please clarify mooring system scope: Do you want 30% of additional rope over the vertical depth of the water?
Correct. The total assembly line length should be 1.3 times the depth. E.g. For depth of 100 feet, the total line assembly will be 130 feet.
3. Can we substitute the US hardware with Dutch Van Beest hardware?
Van Beest Green Pin Hardware is acceptable.
File details come from the government source that posted it. Updated .