Questions_and_Answers_0001.pdf
PDF 482 KB Posted
- Attached to
- REPLACE MAINLAND MUSEUM STORAGE SYSTEM Federal contract opportunity
- Solicitation number
- 140P5422Q0017
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Sol_140P5422Q0017_Amd_0001.pdf | ||
| FLOOR_PLAN_SECOND_0001.pdf | ||
| Approximate_Current_Layout_0001.pdf | ||
| Specifications.pdf | ||
| Sol_140P5422Q0017.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SOLICITATION QUESTIONS
1. The Ceiling height is 116” if you take each shelf at 14” opening you can not put 8 shelves. Since the Ceiling height is 116” and you have sprinklers that brings the total height to we can go 96”. If we can make the shelves at 11-1/4” we can get 8 shelves. The boxes that are 6” H. You can have the shelves at 12 -1/4” H and double stack. Can we do this to meet specs?
This should be fine. Ceiling height is actually 151” with a section near the interior door that is 84” tall. The “historic” room is 116” tall.
2. Are we going to use the addition space or is all the shelving going over the Old bank on the plywood floor?
The track shelving will not be installed on the plywood floor. We would like 132 units of static shelving 48” wide, 12” deep on the plywood floor.
3. Have you done structural analysis on the building to assure the 2nd floor can hold the weight of a high density mobile system?
The north side of the building has a floor load rating of 60 pounds per square foot while south side addition is floor rated at 250 pounds per square foot. These load determinations cannot be verified by as built drawings or other official engineering reports but should be verified prior to any renovation of the spaces with the use of compacting aisle storage units.
4. What is the size, quantity and elevation of the existing shelving to be re-used on new tracks?
22 widespan shelving, 96” wide, 48” deep.
10 Wire shelving: 36” wide, 18” deep.
5. What is the size, quantity and elevation of the new static shelving required to hold archival boxes?
132 units, 48” wide, 12” deep, 76 ¼” tall. Six shelves per unit.
6. Is there a layout provided for this system?
An attachment is provided for layout system.
7. Is there a layout or CAD file that can be provided for the room?
A PDF attachment is provided for room.
8. How much of the shelving is existing and what are the sizes?
Widespan shelving, 96” wide, 48” deep.
15 wire shelving: 36” wide, 18” deep.
1 Troupe Glass door cabinet 50” x 32”.
4 Museum Cabinets 58” x 37” 28 Museum Cabinets 28” x 37” 36 Map Cabinets 54” x 16 ½” Various Cabinets: 43” x 81” 56 ½” x 81” 23” x 43” 3 Botanical Cabinets: 29” x 84”
9. Where is the existing shelving being placed?
See Attached drawing.
10. Who is the manufacturer of the existing shelving?
Several manufacturers: Steel Fixtures, OFMX5, SAFCO, Metro, Interior
11. How many sections of new static shelving is needed and what are the sizes? (this was not included in the specifications)
132 units, 48” wide, 12” deep, 76 ¼” tall. Six shelves per unit.
12. Is there a layout of the room?
Please see question number 7.
13. Will accept a proposal from a Small Business for a Large Business manufacturer.
This project has a total small business set-aside.
14. Would you change the NAICS 337214 to 337215 which would allow for Large Business Manufacturer? OR would you consider a waiver?
As of this moment there will not be any changes to the NAICS Codes or the Set-Aside for this solicitation/project.
File details come from the government source that posted it. Updated .