Attachment_3_GLAC_Bridge_Decking_Questions_Answered_UPDATED_0002.docx
DOCX document 990 KB Posted
- Attached to
- BRIDGE DECKING FOR GLACIER NATIONAL PARK Federal contract opportunity
- Solicitation number
- 140P1426Q0078
About this file
This is a Questions and Answers document providing clarifications to bidders on the Bridge Decking for Glacier National Park solicitation issued by the Department of the Interior National Park Service Intermountain Region under solicitation number 140P1426Q0078.
The document addresses inquiries from prospective contractors regarding the bridge decking project specifications and requirements. The Q&A format clarifies technical specifications, performance standards, material requirements, and other aspects of the bridge decking work needed at Glacier National Park. This amendment document reflects responses to questions submitted by interested bidders and is designed to ensure all potential contractors have consistent understanding of the solicitation requirements prior to proposal submission. The updated version indicates this was the second amendment addressing bidder questions, with the previous amendment having extended the response deadline and provided additional technical drawings alongside the initial questions answered.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Attachment_4_Bridge_Blueprint_0002.pdf | ||
| Sol_140P1426Q0078_Amd_0002.pdf | ||
| Sol_140P1426Q0078_Amd_0001.pdf | ||
| Attachment_2_GLAC_Bridge_Decking_Questions_Answered_0001.docx | DOCX document | |
| Specifications_for_Bridge_Decking.pdf | ||
| Sol_140P1426Q0078.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
No.
| Question |
| Answer |
| 1 |
| Fir-Larch is a species group that includes Douglas Fir and Larch. Is it fair to assume that Hem-Fir will not meet your spec? Also of note, Larch doesn’t take treatment well, so if you want it treated you might want to limit the spec to Douglas Fir. |
Hem-fir would not be acceptable. Doug Fir accepts treatment slightly better, but not noticeable difference. Would ensure to specify incising to increase treatment penetration.
| 2 |
| Do you have a treatment spec in mind? Several options exist, to include water based or oil based; some are better than others. |
Treat with Copper Naphthenate (CuN) in Type C carrier (mineral spirits) conforming to American Wood Preservers (AWPS) P8, P9, and P36 to a minimum net retention of 0.04 pounds per cubic footing conforming to UC3B
| 3 |
| Glulams aren’t graded like standard lumber products, so the #2 or better spec might not get you what you need. Are you looking for an industrial or architectural grade? 2400F V4 or V8 for strength grade? |
This is a good guide from USFS on timber bridge decking: https://research.fs.usda.gov/download/treesearch/59357.pdf 24F V4 of 24F V8, as noted above would not be preferred for deck glulams, as they are specified for bending about the x-x axis with special tension laminations top and bottom, rather unform layup of the laminations is preferred:
· Glulam deck panels shall be manufactured using uniform-grade, single-combination laminations across the entire cross-section.
· Species: Douglas Fir.
· Lamination Combination: Conform to Axial Combination No. 3 or Combo 50 (without special tension laminations)
· Adhesives: 100% waterproof, wet-use exterior adhesives conforming to ANSI 405.
See Figure 2.1 Below
| 4 |
| Will these beams be used for the decking itself or will they be used as structural support for the decking? Glulams are fantastic for structural use, but not ideal for decking because they are prone to delamination and rot when exposed to the wear and tear of foot and vehicle traffic. |
· This is a good guide from USFS on timber decking: https://research.fs.usda.gov/download/treesearch/59357.pdf
· Recommend using the glulams as noted above that are often specified for bridge decks
· For higher ADT bridges we would recommend running planks in the wheel path to minimize wear/tear on the glulam top of deck, but given that the existing bridge decks functioned appropriately until the fire, likely not needed here.
See Lake MCDonald Bridge # 2 (Photo #1) below
| 5 |
| Where specifically will the product be delivered? |
Park Headquarters, West Glacier, MT
| 6 |
| Do you have the means to unload the delivery? |
Yes
| 7 |
| The documents do not identify a specific AWPA Use Category, pressure treatment level, preservative type, or retention requirement. |
See other answers
| 8 |
| After reviewing the solicitation documents and specifications, I noted that the requirement specifies Pressure Treated Glulam, Fir/Larch, Grade #2 or better, with dimensions of 5-1/2" x 48" x 18'. |
However, the documents do not identify a specific AWPA Use Category, pressure treatment level, preservative type, or retention requirement.
Could you please confirm the required treatment specification or advise the recommended Use Category for this bridge decking application so we can ensure compliance with the Government’s requirements?
Treat with Copper Naphthenate (CuN) in Type C carrier (mineral spirits) conforming to American Wood Preservers (AWPS) P8, P9, and P36 to a minimum net retention of 0.04 pounds per cubic footing conforming to UC3B.
· Glulam deck panels shall be manufactured using uniform-grade, single-combination laminations across the entire cross-section.
· Species: Douglas Fir.
· Lamination Combination: Conform to Axial Combination No. 3 or Combo 50 (without special tension laminations)
· Adhesives: 100% waterproof, wet-use exterior adhesives conforming to ANSI 405.
· NOTICE ANSWER TO 10
| 9 |
| The dimensions of the lumber is listed as “5 ½” x 48” x 18’” as well as a quantity of 14. Does this mean you are looking for enough material to cover an area that is 48” wide and 18’ long and 5.5” thick? And looking to cover 14 sections of that size? |
What I am thinking is you are maybe looking for a regular 2x6 board (1.5” x 5.5” actual dimensions) that is 4’ wide and enough material to deck the 18’ bridge?
Dimensions of the lumber used in the glulams are standard 2x6 material. Each glulam is 4' x 18'. We need 14 of those.
| 10 |
| Copper Naphthenate has been phased out by industry and is no longer available. Do you have an alternative treatment spec in mind? |
Copper Azole (CA-B) should work for our application.
image1.png image2.png
File details come from the government source that posted it. Updated .