140L5726Q0027_Attachment_01_Q_As_0001.pdf
PDF 67 KB Posted
- Attached to
- WDD Range Cattleguard Purchase
- Solicitation number
- 140L5726Q0027
About this file
This is a Questions and Answers document for federal contract opportunity 140L5726Q0027 addressing clarifications on cattle guard components and specifications.
The solicitation requires procurement of cattle guard equipment for ten 16-foot openings, with confirmed quantities of 20 each cattle guards (8' HS20 rated), 20 each wings (10 sets of 2), and 40 each bases (20 sets of 2). The cattleguard fabrication weldment/grate does not require a cleanout feature. End wings must be tubular or angle iron construction only; swing wings are excluded from the contract scope. For pre-cast concrete bases, the beam length specification is 8 feet each, concrete strength must meet a 4,000 PSI minimum, and uncoated rebar is acceptable for this requirement.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Sol_140L5726Q0027_Amd_0001.pdf | ||
| Sol_140L5726Q0027.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
140L5726Q0027
Q&A’s
Q1. Could you please confirm that the quantities should be as follows: Cattle Guard Bases (20 sets of 2), Cattle Guard Wings (20 sets of 2), and 8’ Cattle Guard HS20 (20 each)?
A1. The numbers are correct as these will be for ten 16’ cattle guard openings.
20 each wings (10 sets of 2) 20 each cattle guards 40 each bases (20 sets of 2)
Q2. Is the Cattleguard fabrication weldment option with or without the CLEANOUT?
A2. The cattleguard weldment/grate does not need a cleanout.
Q3. Is the Swing Wing considered part of the End Wing assembly, or is it a separate scope of work that should not be quoted with the required End Wing?
A3. A swing wing will not be part of this contract. Just the tubular or angle iron end wings need to be included.
Q4. Regarding pre-cast pieces:
-required beam length - confirming 8' each please -specified concrete strength?
-rebar finish - uncoated or epoxy-coated?
A4. For the question regarding the concrete bases:
• Beam length for the concrete bases is 8 feet. That is listed in the specification document as well.
• Concrete strength must be 4,000 PSI minimum.
• Uncoated rebar is sufficient.
File details come from the government source that posted it. Updated .