B08_Statement_of_Work_Attachment_2.docx

Statement of Work

BLM Law Enforcement Patrol Vehicle Upfitting Bureau of Land Management, Las Cruces District Office 1800 Marquess St., Las Cruces, NM 88005

Contract will include removal and transferring equipment from old truck to new truck and purchasing any required new equipment. BLM will provide Motorola, Bendix King, and SatRad radio systems and cell phone booster for provider to install. New head controllers will be supplied. Old truck is a 2019 Ford F-150. New truck is a 2024 Chevy 1500 ZR2. This vehicle must maintain OEM center console due to shifter configuration.

Vendor shall PURCHASE and install the following NEW items:

· Rear bumper with 1-inch D-ring shackle mount points and light mount kit manufactured by Ironman 4x4.

· Clear cube lights mounted on rear bumper tied into reverse system.

· 4 surface mount red/blue LED emergency lights mounted in grill facing forward

· 4 surface mount red/blue LED emergency lights mounted on front bumper facing sideways

· 4 surface mount red/blue LED emergency lights mounted on tailgate facing rear, these lights will be tied into brake light circuit to run red when brakes are applied.

· 4 surface mount red/blue LED emergency lights mounted vehicle front and rear fenders facing sideways.

· Wig wag control for headlights and taillights

· 2000-Watt power inverter in cab

· Federal Signal Allegiant lightbar

· Federal Signal pathfinder siren controller (handheld controller)

· Federal signal 2 sirens on front bumper and 2 rumblers

· Truck vault or similar sliding bed lockbox in bed

· Single prisoner quarter cage for passenger side

· White light mounted in prisoner cage

· Blackout kit to disable all exterior lighting, including all brake lights during night operations

· Protective grate over rear window in prisoner cage

· Protective grate over side window in prisoner cage

· Disable rear passenger side window and door latch in prisoner cage

· Install BLM supplied striping and badge decals

· Mounts for all supplied radios. Radios mounted on prisoner cage wall or within center console. Radios need new handheld controllers. Handheld controllers will be mounted on center console or dash.

· Power supplies and fuse boxes

Vendor shall TRANSFER and INSTALL the following equipment from old truck to new truck:

· 2 IR lights on front bumper

· Motorola APX, Bendix King, Skymira Satellite radio and all components and antennas.

· Rifle lock mount

· Rifle lock mount attached to prisoner cage between front seats, hidden switch under dash below and right of steering wheel.

· Radio speakers

· Weboost cell phone booster (new in box)

All holes in body from equipment removal shall be filled and made watertight.

Estimated Period of Performance: All proposed work done on the vehicles as well as the delivery of the new upfitted vehicle to the BLM is expected be completed by 9/30/2024. Quoter must include proposed schedule.

Special Requirements: All standard warranty provided by the vendor for supplied equipment and for the labor associated with the installation is acceptable. No requirement is made for additional warranty on labor or supplied equipment.

Delivery of Vehicles: BLM staff will transport the vehicles to/from the Contractor’s location if it is within 250 driving miles or less of 1800 Marquess St Las Cruces, NM 88005. If the Contractor’s facility is outside of this area, all vehicles must be transported to and from Contractor’s facility by a DOT-licensed and insured car carrier.

Location of Work: Work shall be completed at the Contractor’s facility. The vehicle shall be kept in a secure location with controlled access while at the Contractor’s facility.

Damage to Government Property: The Contractor is responsible for repairing or replacing any Government property damaged during work. This includes equipment items, the entire vehicle while in their possession, and other Government property provided for services. The Contractor must annotate existing damage upon vehicle delivery and is liable for additional damage caused by them. Such additional damage must be corrected to the satisfaction of the Contracting Officer Representative or designated government technical adviser.