Sol_140L3921Q0113_Amd_0002.pdf

(x)

140L3921Q0113 x x

1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted ; or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGEMENT TO BE

RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR

OFFER. If by virtue of this amendment you desire to change an offer already submitted , such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

x

LVA

RENO NV 89502

1340 FINANCIAL BLVD.

BLM NV-STATE OFC BGT&FIN SVC(NV955)

09/02/20210002

13. THIS ITEM ONLY APPLIES TO MODIFICATION OF CONTRACTS/ORDERS. IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

12. ACCOUNTING AND APPROPRIATION DATA (If required) is not extended.is extended, Items 8 and 15, and returning

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended , by one of the following methods: (a) By completing

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

FACILITY CODE CODE

10B. DATED (SEE ITEM 13)

10A. MODIFICATION OF CONTRACT/ORDER NO.

9B. DATED (SEE ITEM 11)

9A. AMENDMENT OF SOLICITATION NO.

CODE

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code)

7. ADMINISTERED BY (If other than Item 6)CODE 6. ISSUED BY

PAGE OF PAGES

4. REQUISITION/PURCHASE REQ. NO.3. EFFECTIVE DATE2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO. (If applicable)

1. CONTRACT ID CODE

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

08/17/2021

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority) appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

E. IMPORTANT: Contractor is not is required to sign this document and return __________________ copies to the issuing office.

ORDER NO. IN ITEM 10A.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

FENCE MATERIALS - BLM, ELY DISTRICT OFFICE

Quotes should be emailed to: djwatson@blm.gov.

Pricing shall include shipping to Ely NV 89301

THE REASON FOR THIS AMENDMENT (0002) IS TO EXTEND THE CLOSING DATE, UPDATE THE

CLAUSES/PROVISIONS, AND EXTEND THE ESTIMATED DELIVERY DATE.

Continued ...

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)15A. NAME AND TITLE OF SIGNER (Type or print)

15C. DATE SIGNED 16B. UNITED STATES OF AMERICA 15B. CONTRACTOR/OFFEROR 16C. DATE SIGNED

(Signature of person authorized to sign) (Signature of Contracting Officer)

Deforest Watson

STANDARD FORM 30 (REV. 11/2016)

Prescribed by GSA FAR (48 CFR) 53.243

Previous edition unusable

Except as provided herein, all terms and conditions of the document referenced in Item 9 A or 10A, as heretofore changed, remains unchanged and in full force and effect .

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

NAME OF OFFEROR OR CONTRACTOR

2 44

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

(A) (B) (C) (D) (E) (F)

140L3921Q0113/0002

A. THE CLOSING DATE HAS BEEN EXTENDED THROUGH

THURSDAY SEPTEMBER 09, 2021. ALL QUOTES MUST BE

EMAILED TO DEFOREST WATSON AT DJWATSON@BLM.GOV NO

LATER THAN 4:00PM, PACIFIC TIME.

B. SEE ATTACHED FOR SPECIFICATIONS AND

CLAUSES/PROVISIONS

C. THE DELIVERY DATE IS CHANGED TO 04/15/2022.

THE GOVERNMENT UNDERSTANDS SOME MATERIALS MAY BE

EXPERIENCING DELIVERY DELAYS THEREFORE OFFERORS

SHALL INDICATE AN ANTICIPATED DELIVERY DATE IN

THEIR QUOTE, BASED ON AVAILABILITY.

ALL OTHER TERMS AND CONDITIONS REMAIN UNCHANGED.

Change Item 00010 to read as follows(amount shown is the obligated amount):

00010 Steel Fence "T" Posts - see attached 7100 EA specifications

-7,100 Pieces

-Steel posts shall be 5 feet 6 inches in length, painted green with white or silver tops (unless otherwise stated) "T" bar type, with riveted anchor plate, attached so the top of the plate is not more than 18 inches from the bottom of the post.

-They shall be furnished with clip-type wire fasteners (minimum 4 clips per post) with a zinc coating of at least 0.3 oz. per square foot

(punched tabs for fastening wire are not acceptable).

-Steel posts shall be manufactured from wrought, rail, or new billet steel, and shall weigh a minimum of 1.33 lb. per ft. exclusive of the anchor plate, which shall weigh a minimum of 0.67 lb., and shall be a minimum of 18 sq. inches in area.

-Steel fence posts and fasteners shall be in accordance with ASTM A702.

Product/Service Code: 5660

Product/Service Description: FENCING, FENCES, GATES AND COMPONENTS

Change Item 00020 to read as follows(amount shown

Continued ...

NSN 7540-01-152-8067 OPTIONAL FORM 336 (4-86)

Sponsored by GSA

FAR (48 CFR) 53.110

3 44

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

(A) (B) (C) (D) (E) (F)

140L3921Q0113/0002 is the obligated amount):

00020 Steel pipe for Vertical Fence Structures - see 175 EA attached specifications

-175 Pieces

-Shall be 2-3/8" outside diameter with a wall thickness of 3/16"

-Shall be made from galvanized steel

-7' in length

-Shall be in accordance with ASTM F1083-87

Product/Service Code: 5660

Product/Service Description: FENCING, FENCES, GATES AND COMPONENTS

Change Item 00030 to read as follows(amount shown is the obligated amount):

00030 Steel pipe for Horizontal Fence Structures - see 150 EA attached specifications

-150 Pieces

-Shall be 1-5/8" outside diameter with a wall thickness of 1/8"

-Shall be made from galvanized steel

-7' in length

-Shall be in accordance with ASTM F1083-87

Product/Service Code: 5660

Product/Service Description: FENCING, FENCES, GATES AND COMPONENTS

Change Item 00040 to read as follows(amount shown is the obligated amount):

00040 Barbed wire rolls - see attached specifications 260 EA

-260 Rolls

-Each roll shall be 1,320' in length

-Shall be two twisted wires of 12 1/2-gauge galvanized wire with 2-point barbs of 14-gauge wire spaced 4 inches apart.

-Wire and barbs shall be zinc-coated steel, with a zinc coating of at least 0.3 oz. per sq. ft. of

Continued ...

NSN 7540-01-152-8067 OPTIONAL FORM 336 (4-86)

4 44

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

(A) (B) (C) (D) (E) (F)

140L3921Q0113/0002 coated surface area and a minimum breaking strength of 950 lb.-force in accordance with

Federal Specification RR-F-221/1 or ASTM A121.

Product/Service Code: 5660

Product/Service Description: FENCING, FENCES, GATES AND COMPONENTS

Change Item 00050 to read as follows(amount shown is the obligated amount):

00050 Barbless wire rolls - see attached specifications 90 EA

-90 Rolls

-Each roll shall be 1,320' in length

-Two twisted wire of 12 1/2-gauge, galvanized wire with no barbs.

-Wire shall be zinc-coated steel wire of at least

0.3 oz. per sq. ft. of coated surface area and a minimum breaking strength of 950 lb.-force in accordance with Federal Specification RR-F-221/1 or ASTM A 121.

Product/Service Code: 5660

Product/Service Description: FENCING, FENCES, GATES AND COMPONENTS

Change Item 00060 to read as follows(amount shown is the obligated amount):

00060 Wire Fencing Stays - see attached specifications 7100 EA

-7,100 Pieces

-Twisted wire fence stays manufactured from smooth galvanized 9 1/2-gauge (minimum) wire at least 30 inches in length and not exceeding 32 inches.

Product/Service Code: 5660

Product/Service Description: FENCING, FENCES, GATES AND COMPONENTS

Change Item 00070 to read as follows(amount shown is the obligated amount):

Continued ...

NSN 7540-01-152-8067 OPTIONAL FORM 336 (4-86)

5 44

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

(A) (B) (C) (D) (E) (F)

140L3921Q0113/0002

00070 Fencing Staples - see attached specifications 50 LB

-50 pounds

-Staples shall be 9-gauge, bright-finish or galvanized.

-1" in length

-Staples shall be barbed

-Staples shall be in accordance w/ ASTM F1667

Product/Service Code: 5660

Product/Service Description: FENCING, FENCES, GATES AND COMPONENTS

Change Item 00080 to read as follows(amount shown is the obligated amount):

00080 Carriage Bolts and Nuts - see attached 250 EA specifications

-250 Pieces

-Shall be 3/8" x 1-1/2"

-Shall be composed of galvanized steel

-Shall be compatible with items "I", "J" and "L"

Product/Service Code: 5660

Product/Service Description: FENCING, FENCES, GATES AND COMPONENTS

Change Item 00090 to read as follows(amount shown is the obligated amount):

00090 2-3/8" Brace Clamps - see attached specifications 350 EA

-350 Pieces

-Shall be 3/4" x 2-3/8" diameter (to fit item "B" and be fastened by item "H")

-Shall be made from 12-gauge galvanized steel

Product/Service Code: 5660

Product/Service Description: FENCING, FENCES, GATES AND COMPONENTS

Change Item 00100 to read as follows(amount shown is the obligated amount):

Continued ...

NSN 7540-01-152-8067 OPTIONAL FORM 336 (4-86)

6 44

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

(A) (B) (C) (D) (E) (F)

140L3921Q0113/0002

00100 3" Brace Clamps - see attached specifications 175 EA

-175 Pieces

-Shall be 3/4" x 3" diameter (to fit 3" pipe and be fastened by item "H")

-Shall be made from 12-gauge galvanized steel

Product/Service Code: 5660

Product/Service Description: FENCING, FENCES, GATES AND COMPONENTS

Change Item 00110 to read as follows(amount shown is the obligated amount):

00110 Fence Post Caps - see attached specifications 175 EA

-175 Pieces

-Shall be made from aluminum

-Shall have 2-3/8" inside diameter (to fit over item "B" ¿ 2-3/8" steel pipe) and be dome shaped

Product/Service Code: 5660

Product/Service Description: FENCING, FENCES, GATES AND COMPONENTS

Change Item 00120 to read as follows(amount shown is the obligated amount):

00120 1-5/8" Rail End Caps - See attached 260 EA specifications:

-260 Pieces

-Shall have an inside diameter of 1-5/8" (to fit on end of item "C")

-Shall be made from galvanized steel

-Shall be compatible with items "I" and "H"

-Steel pipe shall be in accordance with ASTM

F1083-87

Product/Service Code: 5660

Product/Service Description: FENCING, FENCES, GATES AND COMPONENTS

Continued ...

NSN 7540-01-152-8067 OPTIONAL FORM 336 (4-86)

7 44

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

(A) (B) (C) (D) (E) (F)

140L3921Q0113/0002

Change Item 00130 to read as follows(amount shown is the obligated amount):

00130 Wood Fence Gate End Poles Poles - See attached 75 EA spcifications:

-Pieces

-Shall be 4' in length and 4' in diameter

-Treatment with preservative is not required

-Shall be made from Ponderosa Pine or Lodgepole

Pine

Product/Service Code: 5660

Product/Service Description: FENCING, FENCES, GATES AND COMPONENTS

Change Item 00140 to read as follows(amount shown is the obligated amount):

00140 Wood Gate Stays - see attached specifications 100 EA

-100 Pieces

-Treatment with preservative is not required

-Stays shall have a length of 4'0"

-Stays shall be made from either Ponderosa Pine or Lodgepole Pine

-Wood gate stays for wire gates shall be sound and straight pieces, 1-1/2 inches minimum and

2-1/2 inches maximum diameter.

Product/Service Code: 5660

Product/Service Description: FENCING, FENCES, GATES AND COMPONENTS

Administrative Point of Contact:

Deforest Watson

Contracting Officer

Ph: 775-861-6410

Email: djwatson@blm.gov

NSN 7540-01-152-8067 OPTIONAL FORM 336 (4-86)