Sol_140D0425R0006_Amd_0002.pdf

(x)

140D0425R0006 x x

1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted ; or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGEMENT TO BE

RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR

OFFER. If by virtue of this amendment you desire to change an offer already submitted , such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

x

Herndon VA 20170

D27

Suite 2000A 381 Elden Street Acquisition Services Directorate Interior Business Center, AQD

06/24/20250002

13. THIS ITEM ONLY APPLIES TO MODIFICATION OF CONTRACTS/ORDERS. IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

12. ACCOUNTING AND APPROPRIATION DATA (If required) is not extended.is extended, Items 8 and 15, and returning

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended , by one of the following methods: (a) By completing

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

FACILITY CODE CODE

10B. DATED (SEE ITEM 13)

10A. MODIFICATION OF CONTRACT/ORDER NO.

9B. DATED (SEE ITEM 11)

9A. AMENDMENT OF SOLICITATION NO.

CODE

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code)

7. ADMINISTERED BY (If other than Item 6)CODE 6. ISSUED BY

PAGE OF PAGES

4. REQUISITION/PURCHASE REQ. NO.3. EFFECTIVE DATE2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO. (If applicable)

1. CONTRACT ID CODE

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

06/05/2025

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority) appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

E. IMPORTANT: Contractor is not is required to sign this document and return __________________ copies to the issuing office.

ORDER NO. IN ITEM 10A.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

OC UAS Resource Flight Services (Non-Emergency) - The Department of the Interior (DOI)

Interior Business Center (IBC) Acquisition Services Directorate (AQD) in support of the DOI

Office of Aviation Services (OAS) is issuing a request for proposal for On-Call Unmanned

Aircraft Systems (UAS) non-emergency resource flight services for the contiguous lower 48 states for a five-year ordering period. It is a requirement that the successful awardee be registered in the System for Award Management (SAM.gov). This solicitation is set-aside as a total small business set-aside under NAICS code 532411, Commercial Air, Rail, and Water

Transportation Equipment Rental and Leasing Services, with an applicable size standard of

$45.5M.

Continued ...

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)15A. NAME AND TITLE OF SIGNER (Type or print)

15C. DATE SIGNED 16B. UNITED STATES OF AMERICA 15B. CONTRACTOR/OFFEROR 16C. DATE SIGNED

(Signature of person authorized to sign) (Signature of Contracting Officer)

Stephanie Boles

STANDARD FORM 30 (REV. 11/2016)

Prescribed by GSA FAR (48 CFR) 53.243

Previous edition unusable

Except as provided herein, all terms and conditions of the document referenced in Item 9 A or 10A, as heretofore changed, remains unchanged and in full force and effect .

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

NAME OF OFFEROR OR CONTRACTOR

2 60

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

(A) (B) (C) (D) (E) (F)

140D0425R0006/0002

The purpose of amendment 0002 is as follows:

1. Lift the RFP suspension and extend the closing date to July 21, 2025, at 1pm ET.

2. Update Section C18

Mobilization/Demobilization, paragraph C18.3.

3. Provide Government responses to vendor questions.

NSN 7540-01-152-8067 OPTIONAL FORM 336 (4-86)

Sponsored by GSA

FAR (48 CFR) 53.110

SECTION A - REQUIREMENTS AND PRICES

SECTION A – REQUIREMENTS AND PRICES

CONTRACT ACRONYMS

SCHEDULE OF SUPPLIES/SERVICES

A1- ITEM REQUIREMENT

A2 - ITEM 1. PRICING– OC UAS LOWER 48 STATES DAILY AVAILABILITY

A2 -ITEM 2. ADDITIONAL PAY ITEMS SCHEDULE (OTHER DIRECT COSTS)

SECTION B – TECHNICAL SPECIFICATIONS

GENERAL REQUIREMENTS

B1 SCOPE OF CONTRACT

B2 EQUIPMENT REQUIREMENTS

B3 SECURITY OF AIRCRAFT AND EQUIPMENT

B4 ORDER OF PRECEDENCE (SPECIFICATIONS)

B5 MAINTENANCE

B6 MAINTENANCE TEST FLIGHTS

B7 RESERVED

B8 MANAGEMENT

B9 POLICY AND PROCEDURES

B10 PERSONNEL REQUIREMENTS

B11 FLIGHT CREWMEMBERS DUTY AND FLIGHT LIMITATIONS

B12 CONTRACTS AND TASK ORDERS

B13 INSPECTION AND SCHEDULING PROCESS

B14 CONTRACTOR PERSONNEL SECURITY REQUIREMENTS

B15 PROPERTY AND PERSONAL DAMAGE

B17 DATA RIGHTS

SECTION C – CONTRACT TERMS AND CONDITIONS

CONTRACT CLAUSES

FAR 52.252-2 CLAUSES INCORPORATED BY REFERENCE. (FEB 1998)

CLAUSES INCORPORATED BY FULL TEXT

52.252-6 AUTHORIZED DEVIATIONS IN CLAUSES (NOV 2020)

52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS – COMMERCIAL PRODUCTS

AND SERVICES (JAN 2025) (DEVIATION FEB 2025)

52.216-18 ORDERING (AUG 2020)

52.216-19 ORDER LIMITATIONS (OCT 1995)

52.216-22 INDEFINITE QUANTITY (OCT 1995)

52.216-32 TASK-ORDER AND DELIVERY-ORDER OMBUDSMAN (SEP 2019)

1452.201-70 AUTHORITIES AND DELEGATIONS (SEP 2011)

GENERAL CONTRACT TERMS AND CONDITIONS

C1 AIRCRAFT USE REPORT

C2 ELECTRONIC INVOICING AND PAYMENT REQUIREMENTS – INVOICE PROCESSING PLATFORM (IPP) (FEB 2021) C3 POST AWARD EVALUATION OF CONTRACTOR PERFORMANCE CONTRACTOR PERFORMANCE ASSESSMENT REPORTING SYSTEM (DEC 2015)

C4 PRE-WORK MEETING

C5 AIRCRAFT ON-RAMPING PROCEDURES

ADMINISTRATIVE MATTERS

C6 PERSONNEL CONDUCT

C7 SAFETY AND ACCIDENT PREVENTION

C8 MISHAPS

CONTRACT PERIOD AND RENEWAL

C10 CONTRACT ORDERING PERIOD

C11 MEDIA AND PRESS RELEASES

ORDERS FOR SERVICE

C12 RESOURCE FLIGHT SERVICES

C13 SCHEDULE OF OPERATIONS AND REACTION TIME

C14 MAINTENANCE DURING AVAILABILITY PERIOD

C15 GOVERNMENT CANCELLATIONS

MEASUREMENT AND PAYMENT

C16 DAILY AVAILABILITY REQUIREMENTS

C17 UNAVAILABILITY

C18 MOBILIZATION/DEMOBILIZATION

C19 ADDITIONAL PAY ITEMS (FROM SCHEDULE OF ITEMS)

C20 GOVERNMENT MISCELLANEOUS CHARGES

C21 EXHIBITS

EXHIBIT 1 - TECHNICAL SPECIFICATIONS

EXHIBIT 2 - TRANSPORTATION WORKSHEET

EXHIBIT 3 - UAS OC ADD AIRCRAFT REQUEST FORM

EXHIBIT 4 - SAFETY MANAGEMENT SYSTEM (SMS), FLIGHT TIME, ACCIDENT HISTORY, AND FAA VIOLATION

QUESTIONNAIRE

EXHIBIT 5 - OC RESOURCE TASK ORDER REQUEST FORM

SECTION D- INSTRUCTIONS TO OFFERORS

D1 GENERAL INFORMATION

D2 NORTH AMERICAN INDUSTRY CLASSIFICATION SYSTEM (NAICS) CODE AND SMALL BUSINESS SIZE STANDARD

D3 OFFERS

D4 OFFER CONTENTS

D5 PERIOD FOR ACCEPTANCE OF OFFERS

D6 LATE SUBMISSIONS, MODIFICATIONS, REVISIONS, AND WITHDRAWALS OF OFFERS

D7 SPECIAL NOTICE TO OFFERORS

D8 EVALUATION FACTORS

D9 TECHNICAL CAPABILITY

D10 PAST PERFORMANCE

D11 EVALUATED PRICE

D12 TRADEOFF ANALYSIS AND CONTRACTOR SELECTION

SECTION E – OFFEROR’S REPRESENTATIONS, CERTIFICATIONS, AND OTHER STATEMENTS

52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998)

PROVISIONS INCORPORATED BY REFERENCE

PROVISIONS INCORPORATED BY FULL TEXT

52.216-1 TYPE OF CONTRACT (APR 1984)

52.252-5 AUTHORIZED DEVIATIONS IN PROVISIONS (NOV 2020)

52.222-52 EXEMPTION FROM APPLICATION OF THE SERVICE CONTRACT LABOR STANDARDS TO CONTRACTS FOR CERTAIN SERVICES-

CERTIFICATION (MAY 2014)

1452.215-71 USE AND DISCLOSURE OF PROPOSAL INFORMATION-DEPARTMENT OF THE INTERIOR (APR 1984)

E1 CONFLICT OF INTEREST, ORGANIZATIONAL AND CONSULTANT CONFLICTS OF INTEREST

EXHIBITS

EXHIBIT E1 - VENDOR’S MISCELLANEOUS INFORMATION

EXHIBIT E2 - REFERENCE QUESTIONNAIRE

SECTION A – REQUIREMENTS AND PRICES

CONTRACT ACRONYMS

AC Advisory Circular AD Airworthiness Directive AES Advanced Encryption System AIRS Aviation Information Reporting Support AM Amplitude Modulation A&P airframe and power plant APCO Association of Public-Safety Communications Officials AQD Acquisition Services Directorate ASM Aviation Safety Manager ASO Aviation Safety Office ASTM American Society for Testing and Material ATC air traffic control AUR Aircraft Use Report AV Daily Availability BARC Burned Area Reflectance Classification C2 Command and Control CFR Code of Federal Regulations CO Contracting Officer COA Certificate of Authorization COR Contracting Officer’s Representative CFR Code of Federal Regulations CTCSS continuous tone coded squelch system DA Density Altitude DM degrees/minutes/decimal minutes DOI Department of Interior DOT Department of Transportation ECOA Emergency Certificate of Authorization ELT emergency locator transmitter EO/IR Electro Optical/Thermal Infrared EPA Environmental Protection Agency ERG Emergency Response Guidebook FAA Federal Aviation Administration FAR Federal Acquisition Regulations FCC Federal Communications Commission FIPS Federal Information Processing Standard FM Frequency Modulation FS Forest Service FTR Federal Travel Regulations GIS Geographic Information Systems GISS GIS Specialist GCS Ground Control Station GVW gross vehicle weight GPM gallons per minute GPS global positioning system HIGE hover-in-ground effect HOGE hover-out-of-ground effect IAT interagency aviation training IBC Interior Business Center ICAO International Civil Aviation Organization ICP Incident Command Post ICS intercom system IFR instrument flight rules IMT Incident Management Team IMU Inertial Measurement Unit IP Institute of Petroleum

IPP Invoice Processing Platform ISM Industrial, Scientific and Medical NFPA National Fire Protection Association MMSB Manufacturer’s Mandatory Service Bulletins MOA Memorandum of Agreement NTE Not To Exceed NTSB National Transportation Safety Board NWCG National Wildfire Coordinating Group OAS Office of Aviation Services PA public address system PA pressure altitude PFD personal flotation device PIC pilot-in-command PII Personally Identifiable Information POI Point of Interest PPE personal protective equipment PSD plastic sphere dispenser PSI pounds per square inch PTT push to talk RFP Request for Proposals RPM revolutions per minute SFI Safety Foundation Incorporated STEP Single-skid, Toe-In and Hover Exit/Entry Procedures TBO time between overhaul TCAS Traffic Collision Avoidance System TFR Temporary Flight Restriction TSO technical service order UAS Unmanned Aircraft System UASD Unmanned Aircraft System Data Specialist UASM Unmanned Aircraft System Manager UL Underwriter’s Laboratory USDA United States Department of Agriculture VFR visual flight rules VNE velocity never exceed VOX voice activation VSWR voltage standing wave ratio VTOL Vertical Takeoff and Landing VHF Very High Frequency

SCHEDULE OF SUPPLIES/SERVICES

The Government’s intent of this Request for Proposal (RFP) is to award multiple, Indefinite Delivery, Indefinite Quantity (IDIQ) contracts for On Call (OC) Unmanned Aircraft Systems (UAS) non-emergency resource flight services in support of public safety and resource management operations outside of the traffic area which consists of survey and mapping, video, Light Detection and Ranging (LiDAR), thermal operations, and logistical/reconnaissance activities. Each aircraft will be fully contractor-operated and maintained.

Contractor services include provision of the required UAS, personnel, and all other associated equipment to perform the required services as prescribed in this RFP (See Bl.1.) The IDIQ contract has a five-year ordering period and will be procured in accordance with Federal Acquisition Regulation (FAR) Subpart 13.5, Simplified Procedures for Certain Commercial Products and Commercial Services. The maximum shared Ceiling value is $7,500,000.00 over the life of the IDIQ contract. The Minimum Guarantee in accordance with FAR 16.504(a)(1) is $500.00 for each awarded contract.

A1- Item Requirement

ITEM DESCRIPTION

1. Place of Performance: Multiple locations throughout the lower 48 States. All equipment, facilities, and personnel required under this contract shall be delivered to and removed from the Designated Base location(s) identified on each issued task order.

Aircraft Requirement: One Fixed, Assisted Launch/Landing or VTOL unmanned aircraft system equipped as specified in Section B, Exhibit 1. (See Notes Below)

Sensor Requirement: One stabilized dual sensor (EO and IR) gimbal equipped as specified in Section B

Note 1. According to the Federal Aviation Administration (FAA), “an unmanned aircraft system (UAS) … is an aircraft without a human pilot onboard – instead, the UAS is controlled from an operator on the ground.” 14 CFR 1.1 defines “aircraft” as a device that is used or intended to be used for flight in the air.

Note 2. Must have or be capable of obtaining a DOI Aircraft and Flight Crew Authorization per DOI Operational Procedures Memorandum

11. DOI OPERATIONAL PROCEDURES MEMORANDUM (OPM) - 11

Note 3. Aircraft and pilots must demonstrate compliance with applicable sections of Title 14 CFR Part 107 to operate in the National Airspace System (NAS). The FAA retains the authority to approve UAS operations within the NAS in Class A, B, C, D, E and G airspace. Pilots will be approved by the DOI Office of Aviation Services (OAS) in accordance with B13.1.2.

https://www.doi.gov/sites/default/files/documents/2025-05/opm-11.pdf

Unit prices for daily availability will be in whole dollars. If any of these unit prices are adjusted during the life of the contract, they will be adjusted to a whole dollar as follows: amounts of 50 cents or less will be rounded down and amounts of 51 cents or more will be rounded up.

A2 - Item 1. Pricing– OC UAS Lower 48 States Daily Availability

A minimum of two UAS are required; however, Offeror’s are able to provide three of more UAS for consideration (add table(s) as necessary).

OFFEROR NAME

UAS FOR THIS

PRICING SCHEDULE

Make/Model/Series/ FAA Registration # Gimbal Make/Model

UAS HOME BASE

CITY: STATE:

(Pricing in Whole Dollars Only)

ITEM PERIOD DESCRIPTION

PAY

ITEM UNIT

UNIT

PRICE

1A Ordering Year 1 09/15/2025 – 09/14/2026 Daily Availability AV DAY

1B Ordering Year 2 09/15/2026 – 09/14/2027 Daily Availability AV DAY

1C Ordering Year 3 09/15/2027 – 09/14/2028 Daily Availability AV DAY

1D Ordering Year 4 09/15/2028 – 09/14/2029 Daily Availability AV DAY

1E Ordering Year 5 09/15/2029 – 09/14/2030 Daily Availability AV DAY

TOTAL

OFFEROR NAME

UAS FOR THIS

PRICING SCHEDULE

Make/Model/Series/ FAA Registration # Gimbal Make/Model

UAS HOME BASE

CITY: STATE:

(Pricing in Whole Dollars Only)

ITEM PERIOD DESCRIPTION

PAY

ITEM UNIT

UNIT

PRICE

1A Ordering Year 1 09/15/2025 – 09/14/2026 Daily Availability AV DAY

1B Ordering Year 2 09/15/2026 – 09/14/2027 Daily Availability AV DAY

1C Ordering Year 3 09/15/2027 – 09/14/2028 Daily Availability AV DAY

1D Ordering Year 4 09/15/2028 – 09/14/2029 Daily Availability AV DAY

1E Ordering Year 5 09/15/2029 – 09/14/2030 Daily Availability AV DAY

TOTAL

OFFEROR NAME

UAS FOR THIS

PRICING SCHEDULE

Make/Model/Series/ FAA Registration # Gimbal Make/Model

UAS HOME BASE

CITY: STATE:

(Pricing in Whole Dollars Only)

ITEM PERIOD DESCRIPTION

PAY

ITEM UNIT

UNIT

PRICE

1A Ordering Year 1 09/15/2025 – 09/14/2026 Daily Availability AV DAY

1B Ordering Year 2 09/15/2026 – 09/14/2027 Daily Availability AV DAY

1C Ordering Year 3 09/15/2027 – 09/14/2028 Daily Availability AV DAY

1D Ordering Year 4 09/15/2028 – 09/14/2029 Daily Availability AV DAY

1E Ordering Year 5 09/15/2029 – 09/14/2030 Daily Availability AV DAY

TOTAL

A2 -Item 2. Additional Pay Items Schedule (Other Direct Costs)

ITEM DESCRIPTION PAY ITEM UNIT UNIT PRICE

2A Per Diem PD Overnight

For Lodging - Actual cost or above per diem with justification - receipt(s) required for lodging (See C20.2.1)

M&IE authorized daily per diem rate (See C20.2.1)

2B Service Vehicle Class 1:

6000 lbs. or less. (auto) SV1 Mile

Per Federal Travel Regulation (FTR) (http://www.gsa.gov/portal/content/100715)

2C Service Vehicle Class 2:

6001 to 10,000 lbs. usually 4 wheels SV2 Mile $1.71

2D Service Vehicle Class 3:

10,001 to 14,000 lbs. usually 6 wheels SV3 Mile $2.42

2E Service Vehicle Class 4:

Greater than 14,000 lbs. SV4 Mile $3.14

2F Miscellaneous Contractor Costs SC Each Actual Cost (See C20.5)

A2.1. The Minimum Guarantee under the contract, as required by FAR 16.504(a)(1), is $500.00 which will be obligated on a Task Order at contract award. If no aircraft are ordered for an amount that exceeds the stated Minimum Guarantee by the end of the fifth ordering year then the Contractor may submit a request for appropriate compensation. The Minimum Order Quantity as specified in FAR Clause 52.216-22 is $500.00. The Maximum IDIQ quantity will be a shared ceiling of $7.5Million.

A2.2. The Government reserves the right and expects restructuring and or renumbering of the Schedule of Items item numbers. The restructuring will not change pricing but may impact the items and/or sub-items numbering as reflected in this document.

A2.3. The Schedule of Items pricing pages included in this document and that are awarded will be made a part of subsequent individual conformed contracts, to include the UAS make and model, and gimbal make and model specified.

http://www.gsa.gov/portal/content/100715

SECTION B – TECHNICAL SPECIFICATIONS

SECTION B – TECHNICAL SPECIFICATIONS

GENERAL REQUIREMENTS

For clarity, all references to the Federal Aviation Regulation (FAR (14 CFR)) in this requirement will be by reference to Title 14, CFR and abbreviated with the acronym “14 CFR”. All references to the Federal Acquisition Regulation will be abbreviated with the acronym “FAR”. When the requirements exceed the minimum requirements of 14 CFR, this Statement of Work (SOW) takes precedence. Definitions contained in 14 CFR Part 1 apply to all situations and conditions related to flight operations, aircraft maintenance, and flight crew certifications and qualifications, except as noted or defined otherwise herein.

B1 Scope of Contract

B1.1 The purpose of this contract is to obtain fully contractor-operated and maintained OC UAS in support of non-emergency resource services in support of public safety and resource management operations outside of the traffic area which consists of survey and mapping, video, LiDAR, thermal operations, and logistical and reconnaissance activities throughout the Contiguous 48 States.

Contractor services include provisions of a minimum of two complete UAS, necessary spare parts, personnel, servicing vehicles, fuel, and all other associated equipment, as prescribed in this RFP, compliant with Section C - Exhibit 1, Technical Specifications, and/or offered by the Contractor and accepted by the government. The Government will direct aircraft to support its missions and objectives.

B1.2 The Department of the Interior (DOI), wishes to collaborate with vendors to develop a safe, effective, and efficient concept of operations which will support both public safety and resource management objectives within the Department, U.S. Forest Service and partner agencies. Contractor provided UAS services will potentially augment and support current incident management and remote sensing programs.

B1.2.1 UAS will supplement the manned fleet by providing the capability to support public safety and resource management.

B1.3. Tactical Situational Awareness - Aircraft will be utilized day or night.

B1.4 The vendor will provide UAS services and data which will be utilized by qualified personnel to complete/provide the following missions/products:

B1.5 Sensor, ground control, and data deliverables will be requested with each task order.

B1.6 Coordination with aviation resources to ensure aircraft separation.

B1.7 Coordination with ground personnel to ensure timely delivery of requested products.

B1.8 The Contractor shall be responsible for UAS mission execution to include but not limited to transportation, system set-up for mission execution, storage, and tear down at the operational site.

B1.9 For each mission, the Contactor shall provide the Government a single point of contact (POC) that shall be responsible for coordinating operations with the Government Flight Representative (GFR)/UAS Manager (UASM) and this POC shall be technically and administratively authorized to determine the safe integration of operations with the UAS.

B1.10 The Contractor shall be available for flight operations 14 hours a day for all calendar days as required per task orders. It may be necessary that missions occasionally include weekends and holidays.

B1.11 Upon mutual agreement between the Government and the Contractor by modification to the task order, the period of performance may be extended beyond the originally scheduled end date to accommodate weather delays, additional requirements, and other unforeseen circumstances. All event duration extensions shall be considered "in scope" and will be billed in accordance with the contract. Any changes to the period of performance must be approved by the CO.

B1.12 The Government reserves the right to order demobilization of UAS and require Contractor personnel to return to designated task ordered departure location when extended periods of non-flight operations occur.

B2 Equipment Requirements

The Contractor-furnished aircraft, support vehicle, and all other equipment must be operable, free of damage, and in good repair.

Aircraft must be airworthy and systems and components must be in working order.

B2.1 Flight Performance

B2.1.1 The Contractor shall provide a fixed wing, assisted launch/landing or VTOL UAS, necessary spare parts, certified UAS pilots and maintainers, and the equipment and materials to support mission requirements. All aircraft and personnel shall comply with DOI OPM-11 and 14 CFR Part 107 requirements. UAS pilots must be approved and provide documentation for operation of the same offered aircraft by the Federal Aviation Administration (FAA) in the National Airspace (NAS). At a minimum, the pilots must possess an FAA remote pilot certificate.

B2.1.1.1 The UAS shall be capable of flying 12,000’ Density Altitude (DA) (8,500’ Launch site DA for VTOL at max payload).

B2.1.1.2 The UAS shall have sufficient fuel/batteries to last a 16-hour shift.

B2.1.1.3 The UAS shall be capable of takeoff and landings with winds at 20 knots. The UAS shall be capable of operating in sustained winds of 25 knots.

B2.1.1.4 The UAS shall be capable of day and night operations The sUAS must be equipped with lighted anti-collision lighting visible from a distance of no less than 3 statute miles.

B2.1.1.5 The Contractor shall operate the UAS within boundaries of the designated airspace.

B2.2 Command and Control

B2.2.1 The UAS shall be capable of communicating with a Secure digital data uplink frequency, hopping link at 2.4, 5.8, or 900 MHz ISM band or proprietary spectrum with WPA2 or 128, 192, or 256 bit AES encryption (FIPS compliant).

B2.2.2 The UAS shall be capable of communicating with a Secure digital data downlink frequency hopping link at 2.4, 5.8, or 900 MHz ISM band or proprietary spectrum with WPA2 or 128, 192, or 256 bit AES encryption (FIPS compliant).

B2.2.3 The UAS shall possess autonomous Loss of Link (LOL) capability to return to a designated location and terminate the flight.

B2.2.4 The UAS ground station shall be equipped with programmable VHF AM and VHF FM radios (FCC compliant) capable of communicating to incident ground and aviation resources.

B2.2.5 The UAS operations shall be compliant with DOI, FAA policy, and Executive Order 13981.

B2.2.6 The Contractor’s payload operator shall have sufficient experience, as a minimum 25 logged flight hours of the offered UAS make, model, and GCS, to include monitor payload on targets as requested and manipulate zoom/focus/EO/IR to a Government approved best picture available.

B2.2.7 The UAS pilot shall be capable of immediately responding to system malfunctions and emergencies to ensure safe operations.

B2.3 Specific payload(s) will be requested with each task order RFP and shall be separately priced per task order as a firm fixed priced line item.

B2.4 Data Standards

B2.4.1 The sensors shall be capable of capturing still EO and IR images with geo tagging (lat/lon).

B2.4.2 All payload data acquired is property of the Government and must be stored in accordance with government policy.

B3 Security of Aircraft and Equipment

The Contractor will be responsible at all times for the security of their contract aircraft, vehicles, and associated equipment.

B3.1 Physical Security. Any aircraft used under this contract must be physically secured and disabled whenever the aircraft is unattended. Any anti-theft devices designed to lock aircraft flight control surfaces when not in use, or designed to secure an aircraft, is acceptable, provided they are appropriate for the aircraft. Operational environments and personnel safety must be considered when selecting the locking devices and methods to be used.

B3.2 Removal and/or disabling of locking devices and methods must be incorporated into preflight checklists to prevent accidental damage to the aircraft. The devices must be installed in a manner which precludes their inadvertent interference with in-flight operations.

B4 Order of Precedence (Specifications)

In the event of inconsistencies within the technical specification, the following order will be used in such resolution: (1) Typed provisions of these Section B specifications; (2) agency supplements and/or exhibits incorporated by reference; (3) 14 CFR incorporated by reference; (4) aircraft manufacturer's specifications; and (5) other documents incorporated by reference.

B5 Maintenance

B5.1 All maintenance, including inspection, rebuilding, alteration, and installation must be accomplished by a person authorized to perform maintenance by the manufacturer.

B5.1.2 The UASM must be notified of any alterations made to aircraft.

B5.2 Routine/preventive maintenance must be performed before or after the Government’s scheduled daily use period or as approved by the COR.

B5.3 The vendor shall produce and maintain a list of aircraft components which can be replaced in the field. Replacement of components NOT on the list will require consultation with a designated OAS inspector.

B6 Maintenance Test Flights

B6.1 The Contractor must, at their own expense, perform a functional maintenance check flight following installation, overhaul, major repair, or replacement of any engine, power train, rotor system, flight control system, or when requested by the CO or COR. This must be accomplished before the aircraft resumes service under the contract.

B6.2 The Contractor must immediately notify the COR and Government Representative of any change to any engine, power train, flight control or major airframe component or of any major repair following an incident or accident and must describe the circumstances involved.

B7 Reserved

B8 Management

The Contractor’s management policy and procedures shall ensure that contract execution and quality control is effective and in continuous compliance with all contractual requirements.

B9 Policy and Procedures

The Contractor shall provide notification to UASM and COR of any updates/changes made to the Contractor’s policies and procedures that will include anything that effect airworthiness.

B10 Personnel Requirements

B10.1 The Contractor shall provide an UAS and UAS pilots to perform all efforts necessary to execute missions per task order. All Contractor personnel shall comply with local laws, policies, and regulations while supporting any missions ordered under this contract.

B10.2 The Government will assist the Contractor with acquiring personnel passes, identification cards, and vehicle permits if and when required for the performance of this contract.

B10.3 The Contractor personnel operating the UAS shall attend mission briefings as required by the Government and complete any training required by the Government to operate within designated airspace or operate contractor vehicles within restricted areas.

B11 Flight Crewmembers Duty and Flight Limitations

Assigned duty of any kind must not exceed 14 hours in any 24-hour period. “Duty” includes flight time, ground duty of any kind, and standby. Local travel up to a maximum of 30 minutes each way between the worksite and place of lodging will not be considered duty time. Flight crewmembers will be subject to the following duty hour limitations:

B11.1 A maximum of 14 consecutive duty hours during any assigned duty period.

B11.1.1 The pilot must be given 2 calendar days of rest (off duty) within any 14 consecutive calendar days.

B11.1.2 The pilot must be given a minimum of 8 consecutive hours of rest (off duty) prior to any assigned duty period.

B11.1.3 Regardless of the above limits, pilots are expected to notify the government if they become fatigued prior to reaching the duty day limit.

B11.2 Flight Limitations.

B11.2.1 Flight crewmembers will be limited to the following flight hour limitations, which must fall within their duty hour limitations:

B11.2.2 A maximum of 8 hours flight time per pilot during any assigned duty period.

B11.2.3 A maximum of 42 hours flight time during any consecutive 6-day period. When a pilot acquires 36 or more flight hours in a consecutive 6-day period, the pilot will be given the following 1 calendar day off duty for rest, after which a new 6-day cycle will begin.

B12 Contracts and Task Orders

B12.1 The Contractor must maintain a complete, current copy of the contract, modifications, and task orders (if applicable) with each contract aircraft throughout the performance period.

B13 Inspection and Scheduling Process

B13.1 After either contract award or renewal, the Government Representative will schedule a date to inspect the Contractor's proposed aircraft, equipment and personnel to ensure contract compliance. The inspection will be conducted at the designated base, Contractor's facility or other location acceptable to the Government and the contractor. The inspection will be scheduled no later than 30 calendar days after award and will be scheduled for between 0730 and 1630 local time, Monday through Friday, unless otherwise agreed upon by the Government Representative. The Government Representative will confirm the inspection details in writing. Contractor written requests for inspection rescheduling that are received by the Government Representative at least 10 days prior to the originally scheduled inspection date may be accommodated by the Government Representative, depending upon their work schedule.

B13.1.1 The Contractor must provide information specific to the aircraft, equipment, and personnel being proposed for use during each year of the contract when requested by the Government Representative.

B13.1.2 The Contractor must notify the CO, the COR, and the Government Representative when an action has been imposed by the FAA on the pilot or on any pilot or aircraft carded under this contract.

B13.1.3 Inspected and approved aircraft and pilots will be issued an Interagency Aircraft Data Card and Pilot Qualification card, as applicable. The aircraft and pilot cards detail the activities for which they are authorized.

B13.1.4 The aircraft and pilot data cards shall be kept with the pilots and available for inspection at all times.

B13.1.5 If the Government Representative determines any aircraft, equipment, personnel, records, or documents presented for inspection are not completely ready for the inspection or are determined to be nonconforming as required by the contract, the Government Representative may suspend the inspection(s) and schedule a reinspection for another time/date/site. The Contractor may be charged for the cost of reinspection.

B13.1.6. Failure to have an aircraft and pilot approved for the contract that is not a result of Government delays, or failure to have an aircraft available throughout the life of the contract as originally awarded may result in exclusion from order consideration, removal from the master on-call UAS listing, and /or termination of contract.

B13.2 Equipment

B13.2.1 The aircraft will be inspected to ensure compliance with all contract requirements. The Government may require in-flight dynamic testing of aircraft systems. This testing may be conducted in conjunction with pilot evaluation flight(s), and will be performed at no cost to the Government.

B13.2.2 The offeror must provide a copy of FAA Airworthiness Certificates or DOD, or NASA flight release prior to inspection.

Offerors without the above certificates or releases will be required to participate in the OAS airworthiness review process at their expense.

B13.2.3 Additional Payloads shall be submitted on a quarterly basis (January 15th, April 15th, July 15th, October 15th) for review and incorporation into the contract.

B13.2.4 Other equipment will be inspected to ensure contract compliance.

B13.3 Personnel

B13.3.1 Contractor(s) must attend 8 hours of incident and aviation operations orientation/training virtually. All cost associated with attendance at this training is the responsibility of the contractor.

B13.3.2 Pilots. Only those UAS pilots who are carded FAA CFR Title 14 Part 107 will be able to perform under this contract.

B13.3.3 The Government Representative may conduct a pilot flight evaluation to further verify pilot(s)' ability to perform under this contract, when determined necessary. A pilot must also be capable of demonstrating proficient operation of all aircraft equipment identified in Section B during an evaluation flight.

B13.3.4 The aircraft used for the flight evaluation(s) must be the same make, model and series awarded for this contract. Flight evaluations are conducted at the Contractor’s expense.

B13.3.5 During the flight evaluation, pilot inspectors retain discretionary authority in determining the competency of the pilot. The Government will make the final determination as to the pilot’s ability to successfully meet contract requirements. The Government has the right to conduct interim evaluations of pilot performance throughout the performance period(s).

B13.3.6. On-Ramping of New Pilots. The Contractor has the authority to identify internal pilots as qualified or trainee on the UAS offered based on the specifications in this contract.

B13.4 Substitute Personnel, Aircraft, or Equipment

B13.4.1 The contractor may request the use of substitute personnel, aircraft, or equipment that was not initially approved for use. All proposed substitutes must meet contract specifications and be subject to inspections and approvals identified herein prior to use. The contractor must submit a written request for substitutes to the CO.

B13.4.2 The Contractor must transport substitute personnel, aircraft, or equipment to the point of use at their expense.

B13.5 Re-inspection Expenses

B13.5.1 The Contractor must be liable for all Government incurred re-inspection costs. Inspection expenses will not be deducted from payments due the Contractor. Contractor will be responsible to make payment as directed in writing by the CO.

B13.5.2 Costs may include, but are not limited to, inspector(s)’ time to include travel time at $75.00 per hour, and transportation and subsistence at actual cost.

B14 Contractor Personnel Security Requirements

B14.1 It has been determined that Contractor personnel utilized in the support of this contract will not be allowed routine and regular unsupervised access to a federally controlled facility for more than 180 days, nor will they need unsupervised access to a Federally controlled Level 3 or 4 information system.

B14.2 Contractor employees utilized in support of this contract will be treated as visitors (un-credentialed Contractor) and not be required to receive background investigations and credentialing. However, un-credentialed Contractors may be subject to the screening processes utilized at each federally controlled facility where the Contractor services are required. As a minimum, Contractor employees will be issued a temporary/visitor badge and shall display it at all times during contract performance when accessing a federally controlled facility. The COR is responsible for ensuring that all Contractor employees are issued a temporary/visitor badge.

B15 Property and Personal Damage

B15.1 The Contractor shall use every precaution necessary to prevent damage to public and private property.

B15.2 The Contractor shall be responsible for all damage to property and to persons, including third parties that occur as a result of his or his agents or employee's fault, negligence or equipment failure. The term "third parties" is construed to include employees of the Government.

B15.3 The Contractor shall procure and maintain during the term of this contract, and any extension thereof, aircraft public liability insurance in accordance with 14 CFR 298. The parties named insured under the policy or policies shall be the Contractor and The United States of America.

B15.4 The Contractor may be otherwise insured by a combination of primary and excess policies. Such policies must have combined coverage equal to or greater than the combined minimums required.

B15.5 The Contractor, prior to the commencement of work, shall submit to the Contracting Officer one copy of the insurance policy, or confirmation from the insurance company, certifying that the coverage described in this clause has been obtained.

B16 Contractor’s Environmental Responsibilities

B16.1 The Contractor is responsible to ensure that all maintenance, fueling, and flight activities do not cause environmental damage to property or facilities. The Contractor is responsible to clean and rehabilitate areas adversely affected by Contractor activities and shall, whenever practical and possible, utilize solvents and cleaning agents that are either biodegradable or consistent with acceptable safety, health and environmental concern practices.

B16.1.1 The Contractor is responsible for handling and clean-up of fuel, oil, and retardant contamination on airport ramps, retardant sites, parking areas, landing areas, etc., when caused by Contractor aircraft or personnel. In the event of a spill of either fuel, oil or fire chemicals the contractor shall notify the Uncrewed Aircraft Systems Manager-Resource (UASR) immediately. The contractor must detail to the government what actions are or will be taken to stop the spill and what actions the contractor is going to take to clean up the spill and rehabilitate the area. Additionally, any cost to the Government as a result of the spill by either contractor aircraft or personnel may be charged to the Contractor and deducted from payments due.

B16.1.2 The Government may assign an area to be utilized by the Contractor for storage of equipment used in support of Contract performance. Oil, solvents, parts, engines, etc. shall be stored and utilized in a manner consistent with acceptable safety, health and environmental concerns.

B16.1.3 The Contractor shall immediately report any spill of fuel, hazardous chemical, regulated waste, or hazardous substance to the CO and spill-reporting authority.

B16.1.4 The Contractor is responsible for aircraft wash down at airtanker base facilities as needed. Potable and nonpotable water will be available at Government airtanker base facilities for contractor’s use.

B17 Data Rights

B17.1 The Government has unlimited rights to all documents/material produced under this contract to the extent permitted by the data rights clauses. The parties mutually acknowledge their understanding that this is the Government’s intent. All documents and materials, produced under this contract shall be Government owned and are the property of the Government with all rights and privileges of ownership/copyright belonging exclusively to the Government. These documents and materials may not be used or sold by the Contractor without written permission from the CO. All materials supplied to the Government shall be the sole property of the Government and may not be used for any other purpose. This right does not abrogate any other Government rights.

B17.2. Contractor personnel shall not divulge, or release data or information developed or obtained in performance of this effort, until made public by the Government, except to authorized government personnel or upon written approval of the CO. The contractor shall not use, disclose, or reproduce proprietary data that bears a restrictive legend, other than as required in the performance of this effort. Nothing herein shall preclude the use of any data independently acquired by the contractor without such limitations or prohibit an agreement at no cost to the Government between the contractor and the data owner which provides for greater rights to the contractor.

SECTION C – CONTRACT TERMS AND CONDITIONS

SECTION C – CONTRACT TERMS AND CONDITIONS

CONTRACT CLAUSES

FAR Clause Notice:

System updates may lag policy updates. The System for Award Management (SAM) Page 3 of 28 may continue to require entities to complete representations based on provisions that are not included in agency RFPs, including 52.223-22, Public Disclosure of Greenhouse Gas Emissions and Reduction Goals—Representation, and paragraph (t) of 52.212-3, Offeror Representations and Certifications—Commercial Products and Commercial Services. Agencies will not consider or use these representations. Entities are not required to, nor are they able to, update their entity registration to remove these representations in SAM.

All Offerors must comply with the following FAR, DIAR, and AQD provisions and clauses which apply to this acquisition:

FAR 52.252-2 Clauses Incorporated by Reference. (FEB 1998) This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address (es): https://www.acquisition.gov/

52.203-3 Gratuities (Apr 1984) 52.203-12 Limitation on Payments to Influence Certain Federal Transactions (Jun 2020) 52.204-13 System for Award Management Maintenance (Oct 2018) 52.204-18 Commercial and Government Entity Code Maintenance (Aug 2020) 52.204-19 Incorporation by Reference of Representations and Certifications (Dec 2014) 52.212-4 Contract Terms and Conditions - Commercial Items with Alternate I (Nov 2021) 52.225-13 Restrictions on Certain Foreign Purchases (Feb 2021) 52.227-14 Rights in Data-General (May 2014)

52.232.29 Unenforceability of Unauthorized Obligations (Jun 2013) 52.232-40 Providing Accelerated Payments to Small Business Subcontractors (Mar 2023) 52.233-1 Disputes (May 2014) 52.233-2 Service of Protest (Sep 2006) 52.242-13 Bankruptcy (Jul 1995)

CLAUSES INCORPORATED BY FULL TEXT

52.252-6 Authorized Deviations in Clauses (Nov 2020)

(a) The use in this RFP or contract of any Federal Acquisition Regulation (48 CFR Chapter 1) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the date of the clause.

(b) The use in this RFP or contract of any Federal Acquisition Regulation (Executive Order 14057) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation.

(End of clause)

52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders – Commercial Products and Services (Jan 2025) (Deviation Feb 2025)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities (Dec 2023) (Section 1634 of Pub. L. 115-91).

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Nov 2021) (Section 889(a)(1)(A) of Pub. L. 115-232).

https://www.acquisition.gov/ https://www.acquisition.gov/far/52.203-19#FAR_52_203_19 https://www.acquisition.gov/far/52.204-23#FAR_52_204_23 https://www.acquisition.gov/far/52.204-25#FAR_52_204_25

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015).

(5) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (Mar 2023) ( 31 U.S.C. 3903 and 10 U.S.C. 3801).

(6) 52.233-3, Protest After Award (Aug 1996) (31 U.S.C. 3553).

(7) 52.233-4, Applicable Law for Breach of Contract Claim (Oct 2004) (Public Laws 108-77 and 108-78 ( 19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

XX (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Jun 2020), with Alternate I (Nov 2021) (41 U.S.C. 4704 and 10 U.S.C. 4655).

XX (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Nov 2021) (41 U.S.C. 3509)).

__ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (Jun 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

XX (4) 52.203-17, Contractor Employee Whistleblower Rights (Nov 2023) ( 41 U.S.C. 4712); this clause does not apply to contracts of DoD, NASA, the Coast Guard, or applicable elements of the intelligence community—see FAR 3.900(a).

XX (5) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Jun 2020) (Pub. L. 109-282) ( 31 U.S.C. 6101 note).

__ (6) [Reserved].

__ (7) 52.204-14, Service Contract Reporting Requirements (Oct 2016) (Pub. L. 111-117, section 743 of Div. C).

XX (8) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Oct 2016) (Pub. L. 111-117, section 743 of Div. C).

XX (9) 52.204-27, Prohibition on a ByteDance Covered Application (Jun 2023) (Section 102 of Division R of Pub. L. 117-328).

__ (10) 52.204-28, Federal Acquisition Supply Chain Security Act Orders—Federal Supply Schedules, Governmentwide Acquisition Contracts, and Multi-Agency Contracts. (Dec 2023) ( Pub. L. 115–390, title II).

XX (11)(i) 52.204-30, Federal Acquisition Supply Chain Security Act Orders—Prohibition. (Dec 2023) ( Pub. L. 115–390, title II).

__ (ii) Alternate I (Dec 2023) of 52.204-30.

XX (12) 52.209-6, Protecting the Government's Interest When Subcontracting With Contractors Debarred, Suspended, Proposed for Debarment, or Voluntarily Excluded. (Jan 2025) ( 31 U.S.C. 6101 note).

XX (13) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Oct 2018) ( 41 U.S.C. 2313).

__ (14)[Reserved].

__ (15) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (Oct 2022) ( 15 U.S.C. 657a).

__ (16) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (Oct 2022) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

__ (17) [Reserved] XX (18)(i) 52.219-6, Notice of Total Small Business Set-Aside (Nov 2020) (15 U.S.C. 644).

__ (ii) Alternate I (Mar 2020) of 52.219-6.

__ (19)(i) 52.219-7, Notice of Partial Small Business Set-Aside (Nov 2020) (15 U.S.C. 644).

__ (ii) Alternate I (Mar 2020) of 52.219-7.

XX (20) 52.219-8, Utilization of Small Business Concerns (Jan 2025)( 15 U.S.C. 637(d)(2) and (3)).

__ (21)(i) 52.219-9, Small Business Subcontracting Plan (Jan 2025) ( 15 U.S.C. 637(d)(4)).

__ (ii) Alternate I (Nov 2016) of 52.219-9.

__ (iii) Alternate II (Nov 2016) of 52.219-9.

__ (iv) Alternate III (Jun 2020) of 52.219-9.

__ (v) Alternate IV (Jan 2025) of 52.219-9.

__ (22)(i) 52.219-13, Notice of Set-Aside of Orders (Mar 2020) (15 U.S.C. 644(r)).

__ (ii) Alternate I (Mar 2020) of 52.219-13.

XX (23) 52.219-14, Limitations on Subcontracting (Oct 2022) (15 U.S.C. 657s).

__ (24) 52.219-16, Liquidated Damages—Subcontracting Plan (Sep 2021) (15 U.S.C. 637(d)(4)(F)(i)).

__ (25) 52.219-27, Notice of Set-Aside for, or Sole-Source Award to, Service-Disabled Veteran-Owned Small Business (SDVOSB) Concerns Eligible Under the SDVOSB Program (Feb 2024) (15 U.S.C. 657f).

XX (26)(i) 52.219-28, Postaward Small Business Program Representation (Jan 2025) (15 U.S.C. 632(a)(2)).

__ (ii) Alternate I (Mar 2020) of 52.219-28.

__ (27) 52.219-29, Notice of Set-Aside for, or Sole-Source Award to, Economically Disadvantaged Women-Owned Small Business Concerns (Oct 2022) (15 U.S.C. 637(m)).

__ (28) 52.219-30, Notice of Set-Aside for, or Sole-Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (Oct 2022) (15 U.S.C. 637(m)).

__ (29) 52.219-32, Orders Issued Directly Under Small Business Reserves (Mar 2020) ( 15 U.S.C. 644(r)).

__ (30) 52.219-33, Nonmanufacturer Rule (Sep 2021) ( 15 U.S.C. 637(a)(17)).

XX (31) 52.222-3, Convict Labor (Jun 2003) (E.O.11755).

__ (32) 52.222-19, Child Labor—Cooperation with Authorities and Remedies (Jan 2025)( E.O. 13126).

https://www.acquisition.gov/far/52.209-10#FAR_52_209_10 https://www.acquisition.gov/far/52.232-40#FAR_52_232_40 https://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title31-section3903&num=0&edition=prelim https://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title10-section3801&num=0&edition=prelim…