Copy_of_Questions_and_Answers_Log_0001.xlsx
XLSX spreadsheet 18 KB Posted
- Attached to
- DEMO/DISPOSE/INSTALL RTRM. FIXTURES TDS
- Solicitation number
- 140A2324R0066
About this file
This document is a Questions and Answers Log for Solicitation #140A2324R00XX. The key details are:
The solicitation is for DEMO/DISPOSE/INSTALL RTRM. FIXTURES TDS, issued by the Department of the Interior Bureau of Indian Affairs Bureau of Indian Education. Contractors asked questions about replacing water closets with floor mount flush valve type, retrofitting bottle fill stations on existing water fountains, and the acceptability of having only one bottle filler per bi-level drinking fountain. The government provided responses confirming the acceptability of the proposed approaches.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Sol_140A2324R0066_Amd_0001.pdf | ||
| B08_SF-1413_Statement_and_Acknowledgement_Form_(Subcontracting).pdf | ||
| Sol_140A2324R0066.pdf | ||
| BIA_Federal_Health_and_Safety_Codes.pdf | ||
| A04_SOW_TDS_Touchless_Faucets.docx | DOCX document | |
| Wage_Determination_NM20240047_3-22-24.pdf | ||
| Questions_and_Answers_Log.xlsx | XLSX spreadsheet |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Sheet1 Questions and Answers Log for Solicitation # 140A2324R00XX
| Number | Date Received | Contractor | Question | Date Sent to COR | Answer | Date Answered |
| 1 | 5/21/24 | QA Engineering LLC | On the job walk through, it was mentioned that the headstart water closets be replaced with new floor mount Flush valve type instead of a tank type touchless. Can you please send plumbing plans/as builts to see the nearest water line to upsize from ½” to 1” for flush valve. | Pictures attached | 5/24/24 | |
| 2 | 5/21/24 | QA Engineering LLC | SOW says • Install 7-filtered water bottle filling stations at each water fountain will need to tie into a GFCI outlet. It is not stated to replace completely. Is it correct to retro fit bottle fill stations on existing water fountain? | Yes, it can be retro fitted on the exisiting water fountain | 5/24/24 | |
| 3 | 5/23/24 | QA Engineering LLC | Elkay only makes Bi-level drinking fountains with 1 bottle filler. Where there are 2 side by side drinking fountains there will only be 1 bottle filler. On the area where there are 3 drinking fountains we can get 1 Bi-level set with a bottle filler and a single with a bottle filler. Total bottle fillers will be 4. Is this acceptable? | Yes | 5/24/24 | |
| 4 | ||||||
| 5 | ||||||
| 6 | ||||||
| 7 | ||||||
| 8 | ||||||
| 9 | ||||||
| 10 |
File details come from the government source that posted it. Updated .