1346549-event.pdf

16 October 2025

Repair Shop Concrete Footing Repair Shop Concrete Footing

16 October 2025

Open 10/16/2025 3:24 PM CDT Type RFQ - Request for Quote Close 10/30/2025 1:00 PM CDT Number 645-RFQ-2226-2026 Currency US Dollar

Sealed Until 10/30/2025 1:00 PM CDT

Payment Terms 0% 0, Net 60

16 October 2025

Contacts Julie Brown julie.brown@iowadot.us

Phone +1 515-239-1892

16 October 2025

Commodity Codes Commodity Code Description

15012 Cement, Concrete, Lime, Plaster Mixes, Retarder and Setting Compounds, Sacked, LTL Quantities, (See Class 750 for Bulk Cement, Concrete and Lime)

16 October 202516 October 202516 October 202516 October 202516 October 202516 October 202516 October 202516 October 202516 October 2025 mailto:julie.brown@iowadot.us

Overview

The Iowa DOT is seeking competitive quotes for Repair Shop Concrete Footing. The Iowa DOT bidding process is subject to the procedures and requirements established in Iowa Administrative Code 761--20.

Shipping Terms

Deliveries shall be F.O.B Destination.

Award - Cost and Other Factors

It is the intent of the Iowa DOT to award the contract to the responsible bidder whose submission is the most advantageous to the Iowa DOT, cost and other factors considered. Other factors include, but are not limited to: meeting or exceeding mandatory requirements, proposed staffing, and meeting required time schedule. Other factors may also include a comprehensive review of bidders past work performance, and work capacity.

Notification of Intent to Award

After responses are evaluated, a Notification of Intent to Award (NOIA) and bid tabulation will be posted publicly on the IMPACS Business Opportunities site.

Communication

Until a contract is awarded, the sole point of contact for this bid opportunity will be the Purchasing Agent listed in the event. All questions must be directed solely to the Purchasing Agent and will not be accepted after the Q&A Submissions Close Date. Bidders are strongly encouraged to submit all questions through the Q&A Board. Responses to questions will be posted on the Q&A Board.

Contract Term

DOT estimated start date: Upon Notice to Proceed and executed contract. (Start date to be coordinated with the DOT Project Manager).

DOT estimated completion date: November 30, 2026

DOT Responsibility-Inspection and Supervision

• All work shall be according to the approved design and shall be under the direct supervision of the Iowa DOT.

• Periodic site inspections will be carried on by the Iowa DOT with the Contractor to ensure coordination of the project.

• The Iowa DOT will provide a list of items requiring inspection prior to or during installation. The Contractor is to give the Iowa DOT notice no less than 24 hours in advance of installation.

• The Iowa DOT point of contact after the contract award shall be determined.

Contract Award

One Purchase Order will be submitted after award.

Site Visits

Description https://bids.sciquest.com/apps/Router/PublicEvent?tab=PHX_NAV_SourcingClosed&CustomerOrg=DASIowa&SourcingPublicSite_FILTER_BY_BUSINESS_UNIT=undefined&SourcingPublicSite_FILTER_BY_BUSINESS_UNIT_buDisplayName=&SimpleSearch_Keyword=&tmstmp=1741986176410

A site visit is Highly Recommended. To schedule a site visit please email Julie Brown at julie.brown@iowadot.us with the requested date and time for the visit. Please give a 24-hour notice in advance of the requested date. Any questions that arise during the site visit must be emailed to the Purchasing Agent listed above or submitted through the Q & A Board on the solicitation.

Tax Exemption

The Iowa Department of Transportation is a tax-exempt agency. Tax exemption certificates will be provided upon request.

Davis-Bacon wages do not apply.

Required to View Event

Prerequisites Required to Enter Bid

16 October 2025

1. Bidder shall certify that they have read, understand, and accept.

2. Bidder shall certify that they have read, understand, and accept.

3. Bidder shall certify that they have read, understand, and accept.

4. Bidder shall certify that they have read, understand, and accept.

5. Bidder shall certify that they have read, understand, and accept.

6. Bidder shall certify that they have read, understand, and accept.

7. Bidder shall certify that they have read, understand, and accept.

16 October 202516 October 202516 October 202516 October 202516 October 202516 October 202516 October 2025

Buyer Attachments

1. Specifications and Plans - 2025-10-10_IDOT_JibCraneFoundation.pdf

2. Photo.pdf

16 October 202516 October 202516 October 202516 October 202516 October 202516 October 2025 https://bids01.jaggaer.com/apps/Router/PublicEventDownload?file=U291cmNpbmdldmVudC8xMzQ2NTQ5LTE5MDcxMDIzNTFTcGVjaWZpY2F0aW9ucyBhbmQgUGxhbnMgLSAyMDI1LTEwLTEwX0lET1RfSmliQ3JhbmVGb3VuZGF0aW9uLnBkZg%3D%3D&auth=MDpBRVMyI0NQNVp4a2IvSnkxZDNIUm81TGpka2h4M0V4bkpBZDlVSkVFUnk5WnZrK2l5eGZjOVRGNkRHUlU9 https://bids01.jaggaer.com/apps/Router/PublicEventDownload?file=U291cmNpbmdldmVudC8xMzQ2NTQ5LTE5MDcxMDIzNTZQaG90by5wZGY%3D&auth=MDpBRVMyI0NQNVp4a2IvSnkxZDNIUm81TGpka2h4M0V4bkpBZDlVSkVFUnk5WnZrK2l5eGZjOVRGNkRHUlU9

Questions Required Questions

Group 1: Construction Instructions:

1.1

Labor Relations:

All Bidders, before entering into a contract with the Department, must be registered with the Division of Labor in the Iowa Department of Workforce Development (515-281-3606) according to chapter 91C, Code of Iowa 2015. This pertains to contractor’s who engage in the business of construction. Please provide your contractor number.

1.2 Is there a lead time on Fabricated or Custom-Built Materials? All Bidders must provide a lead time on any fabricated or custom-built product or products that will impact the project timeline. "No" indicates that all materials needed for the project are readily available with no known delays.

1.3 Project Period:

Please provide the estimated number of days needed to complete the project in this proposal once you have materials readily available.

1.4 Fabricated or Custom-Built Materials Lead Time: Lead times are to be listed for each fabricated product, including estimated product delivery date.

1.5 Bidder's Proposed Project Dates: If bidder wishes to propose alternate project start and end dates, please provide in response field. DOT will evaluate and consider the proposed dates.

1.6 Contract Signing Authority: In the event your company receives the award for this bid opportunity, please provide the following contact information for the person authorized to sign on your company's behalf: Name, Phone Number, Fax Number, and Email address.

1.7

Performance and Payment Bond:

If the contracted amount is $25,000 or more, the successful Bidder must furnish a performance and payment bond covering the faithful performance of 100% of the Contract and the payment of all obligations arising thereunder.

Iowa DOT will provide the Performance and Payment Bond Form 131070 upon contract award.

A Resident Commission Agent or attorney-in-fact must file a copy of the power of attorney.

1.8 Power of Attorney:

Attorney-in-fact who signs the Proposal Guaranty and/or Performance Bond must file with each bond a certified and effectively dated copy of the Power of Attorney.

1.9

Insurance Required:

The resulting Contract will require the successful Contractor to maintain insurance coverage(s) of the type and in the amounts set forth in the Standard Terms and Conditions or as otherwise specified.

1.10 Are you imposing Tariffs in your bid?

1.11 If Contractor is imposing tariffs in their bid, indicate type of tariff and fee below. Put NA if this does not apply.

16 October 202516 October 202516 October 202516 October 202516 October 2025

Product Line Items Product Line Items

There are no Items added to this event.

16 October 202516 October 202516 October 202516 October 2025

Service Line Items Service Line Items

1.

# Item Name, Commodity Code, Description Allow

Alternates Qty. UOM Requested Service Delivery

S1 Repair Shop Concrete Footing (See specs, plan and photo in Buyer Attachments) 1 JA - Job

16 October 202516 October 202516 October 2025