Amendment 0001.docx
DOCX document 202 KB Posted
- Solicitation number
- 1333ND26QNB030097
About this file
This is an Amendment to a Combined Synopsis Solicitation issued by the Department of Commerce National Institute of Standards and Technology (NIST) for Solicitation Number 1333ND26QNB030097. The amendment, dated March 11, 2026, provides clarifications to the original solicitation requirements based on two submitted questions. The response deadline for this solicitation is March 16, 2026, with Ranae Armstrong serving as the Contract Specialist and Don Collie as the Contracting Officer.
The amendment addresses two technical clarifications to the requirements for DIN 7/16 Offset Shorts. First, the amendment corrects the language in the Minimum Requirements Section, Line Item 0002 to state that "All devices shall have male DIN 7/16 connectors made to the IEEE 287.1-2021 metrology grade pin connector specification" (changing "be" to "have"). Second, the amendment confirms that Scope item 4 requires "A quantity of seven (7) DIN 7/16 Offset Shorts," correcting what was identified as an apparent typographical error referring to DIN 1/16 connectors. These clarifications ensure that contractors understand the precise technical specifications for the connectors and the correct connector size required for this procurement.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SOW_Final.docx | DOCX document | |
| CSS.docx | DOCX document | |
| Provisions_Clauses.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Combined Synopsis Solicitation Number: 1333ND26QNB030097 Amendment Number: 0001 Date: 11 MAR 26 Requirement: DIN 7/16 Offset Shorts Response Deadline: 16 MAR 26 Contract Specialist: Ranae Armstrong Contracting Officer: Don Collie
The purpose of this amendment is to provide the government’s response submitted questions.
QUESTION 1: Under the Minimum Requirements Section, Line Item 0002 it states “All devices shall be male DIN 7/16 connectors made to the IEEE 287.1-2021 metrology grade pin connector specification”. Please clarify if it should state “All devices shall have male DIN 7/16 connectors made to the IEEE 287.1-2021 metrology grade pin connector specification.”
RESPONSE 1: Under the Minimum Requirements Section, Line Item 0002 should state “All devices shall have male DIN 7/16 connectors made to the IEEE 287.1-2021 metrology grade pin connector specification”. “Be” is hereby revised to “have”.
QUESTION 2: Under Scope, item 4 states “A quantity of seven (7) DIN 1/16 Offset Shorts”. Please confirm this is an error and should state “A quantity of seven (7) DIN 7/16 Offset Shorts”.
RESPONSE 2: Under Scope, item 4 should state “A quantity of seven (7) DIN 7/16 Offset Shorts”.
END OF AMENDMENT 0001
image1.emf
File details come from the government source that posted it. Updated .