HB_SOW_-_SSDG_Exh_Lagging_Repair.pdf
PDF 126 KB Posted
- Solicitation number
- 1333MK25Q0015
About this file
This document is a Statement of Work for repairs to the exhaust insulation lagging on the four Slow Speed Diesel Generators (SSDGs) onboard the NOAA Ship Henry Bigelow. The work is required to be performed while the ship is docked at Naval Station Newport, Pier 2 in Newport, RI from November 18, 2024 to January 17, 2025. The contractor will be responsible for furnishing, delivering, and installing replacement insulation lagging using 2-inch thick blankets with two layers of 1-inch thick 10-pound Texo HTM Mat insulation with a Teflon coated fiberglass cloth outer jacket and 0.008-inch stainless steel mesh inner. The Chief Engineer will inspect the work upon completion prior to acceptance. The federal contract opportunity associated with this Statement of Work has the Solicitation Number 1333MK25Q0015, and is being procured by the National Oceanic and Atmospheric Administration, a civilian agency within the Department of Commerce.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Sol_1333MK25Q0015_Amd_0001.pdf | ||
| 015_Combined_Synopsis_Solicitation_(1).pdf | ||
| Sol_1333MK25Q0015.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
STATEMENT OF WORK
SSDG Exhaust Insulation Repairs NOAA Ship Henry Bigelow – NOV 2024
Page | 1
1. Scope
1.1. The NOAA Ship Henry Bigelow requires repairs to
sections of the SSDG exhaust insulation for the (4) SSDGs as the lagging is deteriorating and needs to be replaced.
2. References
2.1. SSDG TC Exhaust Lagging Pictures
3. Government Furnished Material
3.1. None
4. Requirements
4.1. Provide all materials, labor, tools, coordination, and
transportation to complete the following while alongside Pier 2:
4.1.1. Contractor to furnish, deliver, and install
replacement insulation lagging for deteriorated insulation lagging on (4) SSDGs exhaust turbochargers and associated exhaust inlet and outlet pipes (approximately 6 to 8 ft per SSDG) using 2” thick blankets with 2 layers of 1” thick 10# Texo HTM Mat insulation with Teflon coated fiberglass cloth outer jacket and 0.008 SS mesh inner using SS staples, SS lacing hooks, and SS wire to assembly and install. See reference 2.1 for currently installed lagging.
4.2. Chief Engineer to inspect after installation of new
lagging prior to acceptance of work completion.
5. Key Performance Milestone Dates (no later than these dates):
5.1. 18 NOV 2024 to 17 JAN 2025
6. Quality assurance
6.1. Chief Engineer inspection
7. Notes
7.1. The ship is scheduled to be located at the following
address while inport Newport, RI and for the Dockside Repair Period starting 18 NOV 2024:
NOAA Ship Henry B. Bigelow
STATEMENT OF WORK
SSDG Exhaust Insulation Repairs NOAA Ship Henry Bigelow – NOV 2024
Page | 2
Naval Station Newport – Pier 2 47 Chandler Street Newport, RI 02841
Attn: Chief Engineer
END OF STATEMENT OF WORK
File details come from the government source that posted it. Updated .