Sol_1305M325Q0246_Amd_0001.pdf

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing items 8 and 15, and returning or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

E. IMPORTANT: is not is required copies to the issuing office.

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE

2. AMENDMENT/MODIFICATION NUMBER 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQUISITION NUMBER 5. PROJECT NUMBER (If applicable)

7.ADMINISTERED BY (If other than Item 6) CODE

STANDARD FORM 30 (REV. 11/2016)

Prescribed by GSA FAR (48 CFR) 53.243

FACILITY CODE

9A. AMENDMENT OF SOLICITATION NUMBER

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NUMBER

10B. DATED (SEE ITEM 13)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. is extended. is not extended.

12. ACCOUNTING AND APPROPRIATION DATA (If required) copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NUMBER AS DESCRIBED IN ITEM 14.

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER

NUMBER IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15C. DATE SIGNED

15A. NAME AND TITLE OF SIGNER (Type or print)

16C. DATE SIGNED

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

PAGE

6. ISSUED BY CODE

8. NAME AND ADDRESS OF CONTRACTOR (Number, street, county, State and ZIP Code) (X)

CODE

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

16B. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

Previous edition unusable

PAGESOF

Contractor

The hour and date specified for receipt of Offers to sign this document and return

AMANDA ROSSITER

See continuation page

WAD-NMFS-Seattle

7600 SAND POINT WAY NE BLDG 1

SEATTLE WA 98115

WAD-NMFS-S

1305M325Q0246

08/19/2025

08/08/2025

1 5

1305M325Q0246 0001

Amendment 0002 to Solicitation 1305M325Q0246 is issued to:

1. Revises the Statement of Need (SON) contained in the Solicitation issued on August 8, 2025, as reference Section 3 - Line Items and Attachments. Revisions are attached and are indicated in yellow highlight and red strikethrough.

2. The due date for receipt of quotations remains unchanged at 3:00 PM Eastern Time on August 22, 2025.

3. All other terms and conditions remain unchanged.

Section 3 - Line Items and Attachments

U.S. DEPARTMENT OF COMMERCE

NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION (NOAA) FISHERIES, SOUTHEAST FISHERY

SCIENCE CENTER (SEFSC)

STATEMENT OF NEED

TELESCOPING BOOM CRANE

1. PURPOSE

To outline the technical and commercial requirements for the procurement, fabrication, factory acceptance, and delivery of one Hydraulic Pedestal Crane with UV-Resistant Hose Sleeve Coverings. This equipment will be installed on R/V Gladys Reese as part of a retrofit to enhance offshore research operations.

2. MISSION

The SEFSC conducts marine research in support of the NOAA Fisheries mission to ensure the sustainable use of the nation's living marine resources. A telescoping boom crane is essential for ensuring operational readiness during fisheries and protected species research missions.

3. BACKGROUND

The R/V Gladys Reese is a 134-foot steel-hull research vessel recently acquired and repurposed by SEFSC for NOAA missions in the Gulf of America, South Atlantic, and Caribbean Sea. Originally designed for offshore oilfield work, the vessel is undergoing multiple interior and exterior modifications to support the NOAA Fisheries mission. A new telescoping crane is necessary to ensure vessel readiness for hydrographic, fisheries-independent, and protected species surveys.

4. SCOPE OF WORK

The government is requesting bids to provide a design for the following:

The contractor shall provide one (1) fully assembled hydraulic pedestal crane, including all standard components, documentation, and accessories. The crane shall also include UV-Resistant Hose Sleeve Coverings to all hydraulic hoses on both the crane and the Hydraulic Power Unit (HPU).

The contractor is responsible for:

• Engineering, fabrication, and assembly of the crane

• Application of marine-grade protective coatings

• Factory Acceptance Testing (FAT)

• Provision of complete manuals and documentation

• Packaging and delivery of crane to the designated location (EX Works terms)

• Compliance with API 2C and ABS certification requirements

Technical Requirements

Crane Specifications

• Design: Telescoping Boom, Cylinder Luffing, Offshore Marine-Rated Crane

• Boom Length: 24 feet (retracted) to 40 feet (extended)

• Maximum Capacity: ~10,000 lbs. at short radii with at least 40 ft of telescoping reach and with a two-part line fall

• Rotation: 360° continuous via electric slip ring

• Power Source: 30 HP remote electric Hydraulic Power Unit with 60-gallon reservoir

• Control Station: Operator seat with walkaround controls and stainless-steel splash guard

• Load Safety Systems: Wireless load sensors, anti-two block, angle/radius/load chart indicators

• Load Moment Indicator System

• Main Hoist: Emergency Lowering Device

• Materials: Stainless steel pins, fittings, hydraulic pipework on exposed surfaces

• Finish: PPG 3-coat marine paint system or Carboline with three-part system. Zinc, Epoxy and

Polyurethane finish (black).

• Personnel Lifting: ABS-compliant with secondary hoist brake

• Documentation: Two printed and one digital operator manual included

• UV-Resistant Hose Sleeve Coverings o Includes sleeve coverings for all hydraulic hoses on both the crane and HPU o Designed to prevent premature cracking and deterioration from UV exposure

• Option: Crane Boom Rest/Stowed Cradle

• Pedestal: Standard length pedestal/height 34 inches, O.D. 36 inches, wall thickness 1/2 inch. (for weld down).

5. CERTIFICATION & COMPLIANCE

• Crane shall be API 2C Monogrammed and manufactured under API Q1 quality control

• ABS certification shall be included, covering structural and personnel lifting compliance

• Compliance with U.S. Coast Guard, and OSHA, and marine classification society standards (B.V., Lloyds, DNV) where applicable

6. SCHEDULE OF DELIVERABLES

The following is a schedule of all deliverables, including administrative deliverables, required during the period of performance of this contract:

Item Description Due Date Deliver to

1 Engineering and Design Submittals Within 4 - 6 weeks after contract award Brandi Noble

2 Equipment Delivery & Mobilization No more than 28 weeks after contract award Brandi Noble

3 Installation & Commissioning Within 2 weeks of delivery Brandi Noble

LIST OF ATTACHMENTS

ATTACHMENT No. 1: Past Performance Questionnaire ATTACHMENT No. 2: Service Contract Act WD # 2015-5147, Rev. No. 27, dated July 8, 2025

(End of Statement of Need)