1305M226Q0104.pdf

OFFEROR INSTRUCTIONS

Faxed quotes will not be accepted. Quotes shall be e-mailed to abigail.green@noaa.gov E-mailed quotes must be received by the due date and time to be considered within the deadline.

Quoters must submit all questions concerning this solicitation by email within 5 days of the issuance of this solicitation.

This is a firm fixed price purchase order. The government intends to make an award to the responsive responsible quoter(s) providing the best value to the government, price and non-price factors considered.

Award will be made on the basis of the lowest evaluated price of proposals meeting or exceeding the acceptability standards for non-cost factors. "Best Value" means the expected outcome of an acquisition that, in the Government's estimation, provides the greatest overall benefit in response to the requirement.

The government reserves the right to make a comparative evaluation of quotes in determining best value in accordance with FAR 12.203(c)(2).

Contractors must be registered in the System for Award Management (SAM) at the time the quote is submitted. You may register at www.sam.gov. There is no charge for registering in

SAM.

THE FOLLOWING INFORMATION IS TO BE RETURNED:

1) Page 1 (complete blocks 17a, 30a, 30b, and 30c).

2) Page 3 (fill in your quote/prices).

3) Your Unique Entity Identification (UEI) number. A UEI number is available at no charge through www.sam.gov.

4) Contractor representations and certifications shall be completed in the system for award management (www.sam.gov). Contractors shall provide a statement that they either are or are not registered and active in SAM.

5) Vendors shall provide a statement of whether they are or are not small business under NAICS 326199 code.

6) Your response to 1352.209-74(c), Organizational Conflict of Interest. Contractors shall provide a statement that they either do or do not have a conflict of interest.

7) As requested in 52.212-2, provide your response to the factors used to evaluate quotes to include the requested documentation to support each criterion.

8) Confirmation the buoy hulls will be manufactured in the United States.

9) An e-mail address and telephone number where you can be reached for future correspondence.

mailto:shelley.neubert@noaa.gov http://www.sam.gov/ http://www.sam.gov/

Contractors who do not respond to items 1 through 9 on this page may be considered non-compliant with the requirements of the solicitation and will not be given further consideration for award.

WOMEN-OWNED SMALL

BUSINESS (WOSB)

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES

1. REQUISITION NUMBER PAGE 1 OF

2. CONTRACT NUMBER 3.AWARD/EFFECTIVE

DATE

4. ORDER NUMBER 5. SOLICITATION NUMBER 6. SOLICITATION ISSUE

DATE

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME b. TELEPHONE NUMBER (No collect calls)

8. OFFER DUE DATE/

LOCAL TIME

9. ISSUED BY

13b. RATING

14. METHOD OF SOLICITATION

CODE

15. DELIVER TO 16. ADMINISTERED BY CODE

18a. PAYMENT WILL BE MADE BY CODE17a. CONTRACTOR/

OFFEROR

CODE

FACILITY

CODE

CODE

TELEPHONE NUMBER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN

OFFER

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK

BELOW IS CHECKED

REQUEST

FOR QUOTE

(RFQ)

INVITATION

FOR BID

(IFB)

REQUEST

FOR

PROPOSAL

(RFP)

SEE ADDENDUM

19.

ITEM NO.

20.

SCHEDULE OF SUPPLIES/SERVICES

21.

QUANTITY

22.

UNIT

23.

UNIT PRICE

24.

AMOUNT

(Use Reverse and/or Attach Additional Sheets as Necessary)

25. ACCOUNTING AND APPROPRIATION DATA 26. TOTAL AWARD AMOUNT (For Government Use Only)

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN 29. AWARD OF CONTRACT: REFERENCE

. YOUR OFFER ON SOLICITATION

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

30a. SIGNATURE OF OFFEROR/CONTRACTOR

30b. NAME AND TITLE OF SIGNER (Type or print) 30c. DATE SIGNED

31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)

31b. NAME OF CONTRACTING OFFICER (Type or print) 31c. DATE SIGNED

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 11/2021)

Prescribed by GSA - FAR (48 CFR) 53.212

10. THIS ACQUISITION IS UNRESTRICTED OR

NORTH AMERICAN

INDUSTRY CLASSIFICATION

STANDARD (NAICS):

SIZE STANDARD:

13a. THIS CONTRACT IS A

RATED ORDER UNDER

THE DEFENSE PRIORITIES

AND ALLOCATIONS

SYSTEM - DPAS (15 CFR 700)

SET ASIDE: % FOR:

11. DELIVERY FOR FREE ON

BOARD (FOB) DESTINATION

UNLESS BLOCK IS MARKED

SEE SCHEDULE

12. DISCOUNT TERMS

ARE ARE NOT ATTACHED

ARE ARE NOT ATTACHED

27a. SOLICITATION INCORPORATES BY REFERENCE (FEDERAL ACQUISITION REGULATION) FAR 52.212-1, 52.212-4.

FAR 52.212-3 AND 52.212-5 ARE ATTACHED.

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED.

8(A)

ECONOMICALLY

DISADVANTAGED

WOMEN-OWNED SMALL

BUSINESS (EDWOSB)

SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

(SDVOSB)

HUBZONE SMALL

BUSINESS

SMALL BUSINESS

NOTE: OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30.

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH

AND DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND

ON ANY ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS

SPECIFIED

DATED.

OFFER

ADDENDA

ADDENDA

1305M226Q0104

NATIONAL DATA BUOY CENTER

BLDG 3200

STENNIS SPACE CENTER MS 39529

EAD-SAP

FED BLDG 200 GRANBY ST SUITE 815

NORFOLK VA 23510

EAD-SAP

FED BLDG 200 GRANBY ST SUITE 815

NORFOLK VA 23510

04/30/2026 1100 ED

142082-26-0212

ABIGAIL GREEN

EAD-SAP 100.00

EAD-SAP

ABIGAIL GREEN

326199

04/22/2026

NWWG2500

0001 DART HULL REPLACEMENTS IN ACCORDANCE WITH

ATTACHED SPECIFICATIONS AND DRAWINGS, QTY 4

AMOUNT FOR ONE (1) FIRST ARTICLE INCLUDING

Continued...

STOCK RECORD (S/R)

STANDARD FORM 1449 (REV. 11/2021) BACK

19.

ITEM NO.

20.

SCHEDULE OF SUPPLIES/SERVICES

21.

QUANTITY

22.

UNIT

23.

UNIT PRICE

24.

AMOUNT

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED:

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE RECEIVED (MM/DD/YYYY) 42d. TOTAL CONTAINERS

40. PAID BY

32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f. TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

32g. EMAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

33. SHIP NUMBER 34. VOUCHER NUMBER 35. AMOUNT VERIFIED

CORRECT FOR

PARTIAL FINAL

37. CHECK NUMBER

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER

36. PAYMENT

COMPLETE PARTIAL FINAL

ACCEPTED,

SHIPPING (FIRST ARTICLE SHALL BE DELIVERED

WITHIN 120 DAYS FROM DATE OF AWARD):

AMOUNT FOR REMAINING SUPPLY (3) INCLUDING

SHIPPING (REMAINING SUPPLY SHALL BE DELIVERED

WITHIN 120 DAYS OF FIRST ARTICLE GOVERNMENT

APPROVAL): ________________________

SHIPPING ADDRESS:

BUILDING 3200

STENNIS SPACE CENTER, MS 39525

FIRST ARTICLE TESTING SHALL BE CONDUCTED BY THE

NATIONAL DATA BUOY CENTER (NDBC). THE NDBC

RETAINS THE RIGHT TO WAIVE FIRST ARTICLE

TESTING IF THE CONTRACTOR HAS A PROVEN HISTORY

OF SUCCESSFULLY PROVIDING THE BUOY HULL

REPLACEMENTS.

1305M226Q0104 BASE

Section 3 - Line Items and Attachments Section 4 - Contract Terms and Conditions Section 5 - Other Contract Terms and Conditions

Section 3 - Line Items and Attachments

List of Attachments

Attachment Number Title

1 DART II Hull Specification rev A 2 DART II Hull Drawings

Section 4 - Contract Terms and Conditions

FAR 52.203-17 Contractor Employee Whistleblower Rights. (NOV 2023)

FAR 52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements.

(JAN 2017)

FAR 52.222-3 Convict Labor. (JUN 2003)

FAR 52.222-19 Child Labor - Cooperation with Authorities and Remedies. (JAN 2025)

FAR 52.226-8 Encouraging Contractor Policies To Ban Text Messaging While Driving. (MAY 2024)

FAR 52.232-33 Payment by Electronic Funds Transfer - System for Award Management. (OCT 2018)

FAR 52.232-39 Unenforceability of Unauthorized Obligations. (JUN 2013)

FAR 52.232-40 Providing Accelerated Payments to Small Business Subcontractors. (MAR 2023)

CAR 1352.201-70 Contracting Officer's Authority. (MAR 2010)

CAR 1352.209-73 Compliance with the laws. (APR 2010)

CAR 1352.209-74 Organizational conflict of interest. (APR 2010)

RFO 52.204-13 SYSTEM FOR AWARD MANAGEMENT-MAINTENANCE. (OCT 2018) (Deviation JAN 2026)

RFO 52.204-19 Incorporation by Reference of Representations and Certifications. (DEC 2014)

RFO 52.209-4 FIRST ARTICLE APPROVAL-GOVERNMENT TESTING. (SEP 1989) (Deviation JAN 2026)

[Contracting Officer inserts details]

(a) The Contractor shall deliver ONE unit(s) of Lot/Item DART HULL REPLACEMENT within 120 calendar days from the date of this contract to the Government at Building 3200, Stennis Space Center, MS 39525 for first article tests. The shipping documentation shall contain this contract number and the Lot/Item identification. This contract elsewhere specifies the characteristics that the first article must meet and the testing requirements.

(b) Within 5 calendar days after the Government receives the first article, the Contracting Officer will notify the Contractor, in writing, of the conditional approval, approval, or disapproval of the first article. The notice of conditional approval or approval shall not relieve the Contractor from complying with all requirements of the specifications and all other terms and conditions of this contract. A notice of conditional approval will state any further action required of the Contractor. A notice of disapproval will cite reasons for the disapproval.

(c) If the Government disapproves the first article, the Contractor, upon Government request, shall submit an additional first article for testing. After each request, the Contractor shall make any necessary changes, modifications, or repairs to the first article or select another first article for testing. All costs related to these tests are to be borne by the Contractor, including any and all costs for additional tests following a disapproval. The Contractor shall furnish any additional first article to the Government under the terms and conditions and within the time the Government specifies. The Government will act on this first article within the time limit specified in paragraph (b) above. The Government reserves the right to require an equitable adjustment of the contract price for any extension of the delivery schedule or for any additional costs to the Government related to these tests.

(d) If the Contractor fails to deliver any first article on time, or the Contracting Officer disapproves any first article, the Contractor will have failed to make delivery within the meaning of the Default clause of this contract.

(e) Unless otherwise provided in the contract, the Contractor-

(1) May deliver the approved first article as a part of the contract quantity, provided it meets all contract requirements for acceptance and was not consumed or destroyed in testing; and

(2) Shall remove and dispose of any first article from the Government test facility at the Contractor's expense.

(f) If the Government does not act within the time specified in paragraph (b) or (c) above, the Contracting Officer will, upon timely written request from the Contractor, equitably adjust under the Changes clause of this contract the delivery or performance dates, the contract price, or both, and any other contractual term affected by the delay.

(g) The Contractor is responsible for providing operating and maintenance instructions, spare parts support, and repair of the first article during any first article test.

(h) Before first article approval, the acquisition of materials or components for, or the commencement of production of, the balance of the contract quantity is at the sole risk of the Contractor. Before first article approval, the costs thereof shall not be allocable to this contract for (1) progress payments, or (2) termination settlements if the contract is terminated for the convenience of the Government.

(i) The Government may waive the requirement for first article approval test where supplies identical or similar to those called for in the schedule have been previously furnished by the Offeror/Contractor and have been accepted by the Government. The Offeror/Contractor may request a waiver.

(End of clause)

RFO 52.209-6 PROTECTING THE GOVERNMENT'S INTEREST WHEN SUBCONTRACTING WITH

CONTRACTORS DEBARRED, SUSPENDED, PROPOSED FOR DEBARMENT, OR VOLUNTARILY EXCLUDED.

(JAN 2025) (Deviation JAN 2026)

RFO 52.212-4 TERMS AND CONDITIONS-COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES. (NOV 2023) (Deviation JAN 2026)

RFO 52.219-6 NOTICE OF TOTAL SMALL BUSINESS SET-ASIDE. (NOV 2020) (Deviation JAN 2026)

RFO 52.219-28 POSTAWARD SMALL BUSINESS PROGRAM REREPRESENTATION. (JAN 2025) (Deviation

JAN 2026)

(a) Definitions. As used in this clause-

Long-term contract means a contract of more than five years in duration, including options.

However, the term does not include contracts that exceed five years in duration because the period of performance has been extended for a cumulative period not to exceed six months under the clause at 52.217-8, Option to Extend Services, or other appropriate authority.

Small business concern-

(1) Means a concern, including its affiliates, that is independently owned and operated, not dominant in its field of operation, and qualified as a small business under the criteria in 13 CFR part 121 and the size standard in paragraph (c) of this clause.

(2) Affiliates, as used in this definition, means business concerns, one of whom directly or indirectly controls or has the power to control the others, or a third party or parties control or have the power to control the others. In determining whether affiliation exists, consideration is given to all appropriate factors including common ownership, common management, and contractual relationships. SBA determines affiliation based on the factors set forth at 13 CFR 121.103.

(b) If the Contractor represented that it was a small business concern, a small disadvantaged business concern, or a joint venture that was any of the small business concerns identified in 19.000(a)(3) prior to award of this contract, the Contractor shall rerepresent its size and socioeconomic status according to paragraph (e) of this clause or, if applicable, paragraph (g) of this clause, upon occurrence of any of the following:

(1) Within 30 days after execution of a novation agreement or within 30 days after modification of the contract to include this clause, if the novation agreement was executed prior to inclusion of this clause in the contract.

(2) Within 30 days after a merger or acquisition that does not require a novation or within 30 days after modification of the contract to include this clause, if the merger or acquisition occurred prior to inclusion of this clause in the contract.

(3) For long-term contracts-

(i) Within 60 to 120 days prior to the end of the fifth year of the contract; and

(ii) Within 60 to 120 days prior to the date specified in the contract for exercising any option thereafter.

(c) The Contractor shall rerepresent its size status in accordance with the size standard in effect at the time of this rerepresentation that corresponds to the North American Industry Classification System (NAICS) code(s) assigned to this contract. The small business size standard corresponding to this NAICS code(s) can be found at https://www.sba.gov/document/support--table-size-standards.

(d) The small business size standard for a Contractor providing an end item that it does not manufacture, process, or produce itself, for a contract other than a construction or service contract, is 500 employees, or 150 employees for information technology value-added resellers under NAICS code 541519, if the acquisition-

(1) Was set aside for small business and has a value above the simplified acquisition threshold;

(2) Used the HUBZone price evaluation preference regardless of dollar value, unless the Contractor waived the price evaluation preference; or

(3) Was an 8(a), HUBZone, service-disabled veteran-owned, economically disadvantaged women-owned, or women-owned small business set-aside or sole-source award regardless of dollar value.

(e) Except as provided in paragraph (g) of this clause, the Contractor shall make the representation(s) required by paragraph (b) of this clause by validating or updating all its representations in the Representations and Certifications section of the System for Award Management (SAM) and its other data in SAM, as necessary, to ensure that they reflect the Contractor's current status. The Contractor shall notify the contracting officer in writing within the timeframes specified in paragraph (b) of this clause, that the data have been validated or updated, and provide the date of the validation or update.

(f) If the Contractor represented that it was other than a small business concern prior to award of this contract, the Contractor may, but is not required to, take the actions required by paragraphs (e) or (g) of this clause.

(g) If the Contractor does not have representations and certifications in SAM, or does not have a representation in SAM for the NAICS code applicable to this contract, the Contractor is required to complete the following rerepresentation and submit it to the contracting office, along with the contract number and the date on which the rerepresentation was completed:

(1) The Contractor represents that it [ ] is, [ ] is not a small business concern under NAICS Code [ ] assigned to contract number [ ].

(2) [Complete only if the Contractor represented itself as a small business concern in paragraph (g)(1) of this clause.] The Contractor represents that it [ ] is, [ ] is not, a small disadvantaged business concern as defined in 13 CFR 124.1001.

(3) Women-owned small business (WOSB) joint venture eligible under the WOSB Program. The Contractor represents that it [ ] is, [ ] is not a joint venture that complies with the requirements of 13 CFR 127.506(a) through (c). [The Contractor shall enter the name and unique entity identifier of each party to the joint venture: __.]

(4) Economically disadvantaged women-owned small business (EDWOSB) joint venture.

The Contractor represents that it [ ] is,[ ] is not a joint venture that complies with the requirements of 13 CFR 127.506(a) through (c). [The Contractor shall enter the name and unique entity identifier of each party to the joint venture: __ .]

(5) Service-disabled veteran-owned small business (SDVOSB) joint venture eligible under the SDVOSB Program. The Contractor represents that it [ ] is, [ ] is not an SDVOSB joint venture eligible under the SDVOSB Program that complies with the requirements of 13 CFR 128.402. [The Contractor shall enter the name and unique entity identifier of each party to the joint venture: __.]

(6) HUBZone joint venture eligible under the HUBZone Program.[ Complete only if the offeror is a HUBZone small business concern. ] The offeror represents, as part of its offer, that It [ ] is, [ ] is not a HUBZone joint venture that complies with the requirements of 13 CFR 126.616(a) through (c). [The Contractor shall enter the name and unique entity identifier of each party to the joint venture: _____.] Each HUBZone small business concern participating in the HUBZone joint venture must be certified as a HUBZone concern. [Contractor to sign and date and insert authorized signer's name and title.______________________]

(End of clause)

RFO 52.222-35 EQUAL OPPORTUNITY FOR VETERANS. (JUN 2020) (Deviation JAN 2026)

RFO 52.222-36 EQUAL OPPORTUNITY FOR WORKERS WITH DISABILITIES. (JUN 2020) (Deviation JAN 2026)

RFO 52.222-37 EMPLOYMENT REPORTS ON VETERANS. (JUN 2020) (Deviation JAN 2026)

RFO 52.222-50 COMBATING TRAFFICKING IN PERSONS. (OCT 2025) (Deviation JAN 2026)

RFO 52.223-23 SUSTAINABLE PRODUCTS AND SERVICES. (MAY 2024) (Deviation JAN 2026)

RFO 52.225-3 BUY AMERICAN - FREE TRADE AGREEMENTS - ISRAELI TRADE ACT. (NOV 2023) (Deviation JAN 2026)

RFO 52.233-3 PROTEST AFTER AWARD. (AUG 1996) (Deviation JAN 2026)

RFO 52.233-4 APPLICABLE LAW FOR BREACH OF CONTRACT CLAIM. (OCT 2004) (Deviation JAN 2026)

RFO 52.240-91 SECURITY PROHIBITIONS AND EXCLUSIONS. (Deviation JAN 2026)

FAR 52.252-2 Clauses Incorporated by Reference. (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

https://www.acquisition.gov/browse/index/far

(End of clause)

FAR 52.252-6 Authorized Deviations in Clauses. (NOV 2020)

(a) The use in this solicitation or contract of any Federal Acquisition Regulation (48 CFR Chapter

1) clause with an authorized deviation is indicated by the addition of (DEVIATION) after the date of the clause.

(b) The use in this solicitation or contract of any [insert regulation name] (48 CFR [ ]) clause with an authorized deviation is indicated by the addition of (DEVIATION) after the name of the regulation.

(End of clause)

NOAA Acquisition Manual 1330-52.232-71 ELECTRONIC SUBMISSION OF PAYMENT REQUESTS (FEB 2023)

The Contractor must submit payment requests electronically through the U.S. Department of the Treasury's Invoice Processing Platform System (IPP). The Contractor must use the IPP website to register, access, and submit payment requests. The IPP website address is https://www.ipp.gov.

"Payment request" means any request for contract financing payment or invoice payment to the Contractor. To be considered proper, invoices must be prepared in accordance with, and contain all elements specified in, the contract payment clause (e.g., FAR 52.212-4(g), FAR 52.232-25(a)(3), FAR 52.232-26(a)(2), FAR 52.232-27(a)(2)).

The Contractor must include the following documents as attachments to payment requests submitted through the IPP: Copy of invoice.

If the Contractor is unable to comply with the requirement to submit payment requests through the IPP due to a threat to national security; a matter of unusual or compelling urgency; or because the political, financial, or communications infrastructure of a foreign country does not support access to the IPP, the Contractor must request an exception in writing. Contact the Contracting Officer for more information about requesting an exception.

(End of solicitation and contract language)

NOAA Acquisition Manual 1330-52.237-70 CONTRACTOR COMMUNICATIONS

(a) A contractor employee shall be identified both by the individual’s name and the contractor’s name when:

● Included in NOAA’s locator, and

● When submitting any type of electronic correspondence to any NOAA employee or stakeholder.

(b) Any written correspondence from a contractor or any contractor employee shall be printed on company/organization letterhead or otherwise clearly identify the sender as an employee of the company or organization and shall identify the contract number.

(c) Contractors and/or contractor employees shall clearly identify themselves as such in any verbal communications, whether in informal discussion or a formal meeting.

(End of solicitation and contract language)

NOAA Acquisition Manual 1330-52.237-72 CONTRACTOR ACCESS TO NOAA FACILITIES (SEPT 2017)

(a)

1. The performance of this contract requires employees of the prime contractor or its subcontractors, affiliates, consultants, or team members (“contractor employees”) to have access to and to the extent authorized, mobility within, a NOAA facility.

2. NOAA may close and or otherwise deny contractor employees access to a NOAA facility for a portion of a business day or longer for various reasons including, but not limited, to the following events:

i. Federal public holidays for Federal employees in accordance with 5 U.S.C. 6103;

ii. Fires, floods, earthquakes, and unusually severe weather, including but not limited to snow storms, tornadoes, and hurricanes;

iii. Occupational safety or health hazards;

iv. Lapse in Appropriations; or

v. Federal Statute, Executive Order, Presidential Proclamation, or any other unforeseen reason.

3. In such events, the contractor employees may be denied access to a NOAA facility that is ordinarily available for the contractor to perform work or make delivery, as required by the contract.

(b) In all instances where contractors are denied access or required to vacate a NOAA facility, in part or in whole, the contractor shall be responsible to ensure contractor personnel working under the contract comply. If the circumstances permit, the contracting officer will provide direction to the contractor, either directly or through the COR, which could include continuing on-site performance during the NOAA facility closure period; however, if Government oversight is required and is not available, on-site performance shall not be allowed. In the absence of such direction, the contractor shall exercise sound judgment to minimize unnecessary contract costs and performance impacts, for example, performing required work off- site if possible or reassigning personnel to other activities if appropriate.

(c) The contractor shall be responsible for monitoring the Office of Personnel Management at opm.gov, the local radio, television stations, NOAA web sites, and other communication channels. Once the facility is accessible, the contractor shall resume contract performance as required by the contract.

(d) For the period that NOAA facilities were not accessible to contractors who required access in order to perform the services, the contracting officer may—

1. Adjust the contract performance or delivery schedule for a period equivalent to the period the NOAA facility was not accessible;

2. Forego the work; or

3. Reschedule the work by mutual agreement of the parties.

(e) Notification procedures of a NOAA facility closure, including contractor denial of access, are as follows:

1. The contractor shall be responsible for notification of its employees of the NOAA facility closure to include denial of access to the NOAA facility. The dismissal of NOAA employees in accordance with statute and regulations providing for such dismissals shall not, in itself, equate to a NOAA facility closure in which contractors are denied access. Moreover, the leave status of NOAA employees shall not be conveyed or imputed to contractor personnel. Accordingly, unless a NOAA facility is closed and the contractor is denied access to the facility, the contractor shall continue performance in accordance with the contract.

2. Access to Government facilities and resources, including equipment and systems, will be limited and personnel necessary to administer contract performance may not be available. Generally, supply and service contracts that are funded beyond the date of the lapse in appropriation and do not require access to Government facilities, active administration by Government personnel or the use of Government resources in a manner that would cause the Government to incur additional obligations during the lapse in appropriation may continue. If a delivery date for a contract falls during the period of a lapse in appropriations, Government personnel may not be available to receive delivery. Contractors are directed to consult with a contracting officer before attempting to make a delivery. Contracting officers will be available throughout the lapse in appropriation period to provide guidance.

Once OMB guidance is given, CORs, in consultation with the contracting officer, will notify those contractors that are deemed by the Program Office to be performing excepted work and identify the contractor personnel requiring access to NOAA facilities. CORs will also coordinate directly with facility management or physical security personnel at respective locations to ensure that the names of contractor personnel requiring access to Government facilities during the lapse in appropriations are provided to physical security personnel.

Contractors who are not designated as performing excepted work are not allowed access to Government facilities or to utilize Government resources in a manner that would incur any additional obligation of funding on behalf of the Government during the lapse in appropriation.

3. Unless otherwise specified within the contract award, contractors requiring access to NOAA facilities outside normal business hours or outside the normal workweek shall submit a written request in writing through the COR to the contracting officer. The written request shall provide justification supporting the required access and be submitted [ ] hours/days (contracting officer insert number of days. If blank, 72 hours applies) before access to the NOAA facility is needed.

(End of solicitation and contract language)

Section 5 - Other Contract Terms and Conditions

CAR 1352.233-71 GAO and Court of Federal Claims protests. (APR 2010)

RFO 52.204-7 SYSTEM FOR AWARD MANAGEMENT-REGISTRATION. (NOV 2024) (Deviation JAN 2026)

RFO 52.212-1 INSTRUCTIONS TO OFFERORS-COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES.

(SEP 2023) (Deviation JAN 2026)

RFO 52.225-4 BUY AMERICAN-FREE TRADE AGREEMENTS-ISRAELI TRADE ACT CERTIFICATE. (NOV 2023) (Deviation JAN 2026)

RFO 52.240-90 SECURITY PROHIBITIONS AND EXCLUSIONS REPRESENTATIONS AND CERTIFICATIONS.

(Deviation JAN 2026)

RFO 52.244-6 SUBCONTRACTS FOR COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES. (OCT

2025) (Deviation JAN 2026)

FAR 52.252-1 Solicitation Provisions Incorporated by Reference. (FEB 1998)

This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es): https://www.acquisition.gov/browse/index/far

(End of provision)

FAR 52.252-5 Authorized Deviations in Provisions. (NOV 2020)

(a) The use in this solicitation of any Federal Acquisition Regulation (48 CFR chapter 1) provision with an authorized deviation is indicated by the addition of (DEVIATION) after the date of the provision.

(b) The use in this solicitation of any [insert regulation name] (48 CFR chapter [ ]) provision with an authorized deviation is indicated by the addition of (DEVIATION) after the name of the regulation.

(End of provision)

CAR 1352.215-72 Inquiries. (APR 2010)

Offerors must submit all questions concerning this solicitation in writing to abigail.green@noaa.gov.

Questions should be received no later than five (5) calendar days after the issuance date of this solicitation. Any responses to questions will be made in writing, without identification of the questioner, and will be included in an amendment to the solicitation. Even if provided in other form, only the question responses included in the amendment to the solicitation will govern performance of the contract.

(End of clause)

CAR 1352.233-70 Agency protests. (APR 2010)

(a) An agency protest may be filed with either: (1) The contracting officer, or (2) at a level above the contracting officer, with the appropriate agency Protest Decision Authority. See 64 FR 16,651 (April 6, 1999).

(b) Agency protests filed with the Contracting Officer shall be sent to the following address:

STEVEN.M.PRADO@NOAA.GOV

(c) Agency protests filed with the agency Protest Decision Authority shall be sent to the following address: U.S. Department of Commerce, Office of General Counsel, Contract Law Division Room 5893 Herbert C. Hoover Bldg, 14th St and Constitution Ave NW, Washington, DC 20230

(d) A complete copy of all agency protests, including all attachments, shall be served upon the Contract Law Division of the Office of the General Counsel within one day of filing a protest with either the Contracting Officer or the Protest Decision Authority.

(e) Service upon the Contract Law Division shall be made as follows: U.S. Department of Commerce, Office of the General Counsel, Chief, Contract Law Division, Room 5893, Herbert C.

Hoover Building, 14th Street and Constitution Avenue, NW., Washington, DC 20230. FAX: (202) 482-5858.

(End of clause)

RFO 52.212-2 EVALUATION-COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES. (NOV 2021)

(Deviation JAN 2026)

(a) Evaluation factors. The Government will award a contract resulting from this solicitation to the responsible Offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors will be used to evaluate offers:

The Government will issue an order on the basis of the best value of proposals meeting or exceeding the acceptability standards for non-cost factors in accordance with FAR 12.203(c)(2).

The following factors will be used to evaluate quotations:

1. Price. The Government will evaluate offers or quotations for award purposes by adding the total price for the basic requirement. Line item 0001 will be used to evaluate low price.

2. Past Performance. The offeror's past performance on related contracts will be evaluated to determine, as appropriate, successful performance of contract requirements, quality and timeliness of delivery of goods and services, cost management, communications between contracting parties, proactive management and customer satisfaction.

a. The offeror shall provide a list of at least two, but no more than three, past performances. Past performances shall include the following information: Company name or Government agency, name of project, address, contract person’s name, phone number, and email address.

(End of clause)

(b) Options (if applicable). The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. The evaluation of options does not obligate the Government to exercise the option(s).

(c) Notice of award. A written notice of award or acceptance of an offer furnished to the successful Offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

(End of provision)

NDBC STANDARD SPECIFICATION FOR FABRICATION OF BUOY HULLS

USED IN THE DEEP-OCEAN ASSESSMENT AND REPORTING OF

TSUNAMIS (DART) ARRAY

1.0 SCOPE

1.1 General. This specification describes the requirements for the fabrication of buoy hulls used in the Deep-ocean Assessment and Reporting of Tsunamis (DART) array. This requirement also includes the buoy well, lid, cable pass-thru, and bumper mounts. The contractor shall provide all the necessary labor, material, equipment, facilities and services to fabricate and deliver the hulls to the National Data Buoy Center (NDBC). For the purposes of this specification the terms "payload compartment" and "well" are identical.

1.2 Precedence. Any ambiguity or conflict between this specification and other applicable documents shall be resolved by the following order of precedence:

a) The issued contract with any amendments or modifications

b) This specification

c) The drawings listed in paragraph 2.4

d) Other applicable documents listed in paragraph 2.0

2.0 APPLICABLE DOCUMENTS

2.1 General. The documents listed in this section are referenced in sections 3 and 4 of this specification. This section does not include documents cited in other sections of this specification, which are recommended for additional information or used as examples. While every effort has been made to ensure the completeness of this list, document users are cautioned that they must meet all specified requirements cited in sections 3 and 4 of this specification, whether or not the referenced documents are listed here.

2.2 Government Documents. The following documents form a part of this specification to the extent referenced herein. Suffixes denoting the specific issue of each document are omitted from future references to the documents in this specification.

STANDARD DATE TITLE

MIL-P-21929B 15 Jan 1991 Plastic Material, Cellular, Polyurethane, Rigid, Foam-in-Place, Low Density (2 pounds per cubic foot)

FED-STD-595B 7 Jan 1994 Federal Standard Colors

NDBC-8117 12 Feb 2009 NDBC Standard Test Procedure for DART II Hull Pressure Test

2.3 Industry Publications. The following documents of the issues specified form a part of this specification to the extent referenced herein. Suffixes denoting the specific issue of each document will be omitted from future references to the document in this specification.

STANDARD DATE TITLE

ASTM A666-03 1 Oct 2003 Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar

AWS Dl.6/Dl.6M 10 Mar 1999 Structural Welding Code - Stainless Steel

2.4 Drawings. The following NDBC drawings form a part of this specification to the extent referenced herein and shall be referred to as "the drawings" throughout this specification:

Drawing Rev Title D020011 C DART II Buoy Payload Compartment Assembly D020012 C DART II Buoy Hull Assembly D030043 B DART II Internal Buoy Structure D030047 B DART II Fiberglass Hull Shell D030048 B DART II Fiberglass Hull Deck D030050 B DART II Buoy Well Flange D030052 B DART II Lower Hex Well D030053 B DART II Cable Pipe Deck Flange D030060 C DART II Mounting Block D030061 B DART II Buoy Well Threaded Socket Weldment D030062 B DART II Rubber Handle Mounting Tab D030063 B DART II Buoy Well Cable Pass Thru D030083 B DART II Rubber Bumper Attachment Nut D030095 B DART II Buoy Well Lid

3.0 REQUIREMENTS

3.1 General. The buoy shall be fiberglass over foam with Type 316 stainless steel framework and four attachment points on both the top and bottom.

3.2 Materials

3.2.1 Fiberglass. The fiberglass lay-up shall be layered with a combination of bulk fiberglass, applied by chopper gun, and 24 oz. roving. Equal bi-directional plus, minus, 45-degree strand material may be substituted for 24 oz. roving. Resin to glass ratio shall be 65 to 35. A smooth surface inside mold shall be used to form the fiberglass skin within which the bulk of the fiberglass shall be laid up. This shall be the required technique with the objective of producing buoys of consistent size and shape. Buoys with a surface finish consisting of dips or waves of greater than 1/4 inch may be rejected. All transitions must be fully feathered. Proper fiber glassing techniques shall be followed to prevent delamination.

3.2.2 Stainless Steel. All stainless steel components shall be ASTM A666 Type 316.

3.2.3 Floatation Foam. The floatation foam injected into the hull shall meet the requirement of

MIL-P-21929B.

3.3 Construction

3.3.1 Fiberglass. The fiberglass shall have the following nominal thickness:

Hull Location Thickness (inches) Bottom 1/4 Sides to vertical flat 3/8 Vertical flat on up including top 1/2

Hull shall be constructed using alternate layers of chopped reinforcement, bi-directional and 24

oz. woven roving.

3.3.2 Procedure. Set the proper height of the frames to the inside of the shell. (the critical measurements here is the distance the lower pad eyes protrude out of the bottom of the buoy, i.e.,

3.7 inches minimum). Apply a 3/8-inch alternating layer of mat and roving extending a minimum of 6 inches on each side of the internal framework's bottom plates to secure the frame to the inside of the buoy bottom. An additional 1/8-inch thickness of reinforcement must be applied to the inner and outer seams. Each 1/8 inch thickness band shall be approximately 14 inches wide consisting of chop, two layers of 1-1/2 oz. mat and two layers of unidirectional roving. This additional thickness must be feathered into the adjacent areas not in excess of 3 inches on top and bottom to provide a smooth transition. All voids shall be filled with Duraglass and covered with a gel coat with surface agent then sanded to fair and re-gel coated as required.

The entire finished surface of the buoy is to be coated with gel coat with an air inhibited polyester surface. Apply an 18-inch wide strip of 40-mesh sand with gel coat to give a nonskid texture to the top of the buoy.

Drill thirteen 7/8 inch holes through the buoy side wall. Fiberglass the stainless steel rubber bumper mounts to the inside wall of the buoy at approximately 29 inch intervals. They shall be centered vertically on the rubber bumper groove and layered with 3/8 inch fiberglass and three layers of 24 oz. roving. These must be watertight. Note: the 29 inch interval will mean that the first and last bumper mounts will not be near 29 inches but closer to 12 inches apart.

Apply a smooth bead of 3M 5200 Marine adhesive/sealant to where the stainless steel framework and fiberglass meet.

The vertical sides up to and including the top, well and lid gelcoat shall be colored with three coats of safety yellow with surface agent added to the last coat. Other surfaces remain white.

3.3.3 Welding. All stainless steel welding shall be in accordance with AWS Dl.6.

3.3.4 Flotation Foam Injection. The contractor shall have a procedure for injection and curing of the floatation foam that is in accordance with MIL-P-21929B and manufacturer's instructions.

4.0 QUALITY ASSURANCE

4.1 Welding Procedures and Qualifications. The contractor shall submit welding procedures and welder qualifications that conform with AWS D 1.6 prior to fabrication of the framework.

4.2 Flotation Foam Filling Procedure. The contractor shall submit the selected floatation foam that meets MIL-P-21929B and the procedure for filling the hull prior to beginning the hull fabrication.

4.3 Hull Pressure Test. The contractor shall perform a hull pressure test in accordance with NDBC-8117. Any leaks will require repair and a retest until the test is passed At least two weeks prior to performing this test the contactor shall notify the government so they can witness the test.

4.4 Structural Integrity Test. The contractor shall conduct a proof test of the buoy framework.

This test shall be completed prior to encasing the buoy framework within the fiberglass hull.

This shall involve securing the lower part of the framework and pulling on each corner of the upper part of the framework until a load of 9,000 lbs is indicated on the load cell. This load shall be held for a period of 5 minutes. Following the test all welds and materials shall be inspected for deformation and cracking. Any signs of cracking or deformation will require repair and a retest until the test is passed. At least two weeks prior to performing this test the contactor shall notify the government so they can witness the test. The contractor will submit a signed and dated certificate to indicate the date in which this test was successfully completed.

4.5 Material Certifications. The contractor shall provide vendor supplied material certifications for all materials used in the construction of the buoy framework.

4.6 First Article. The contractor shall produce and deliver a first article of the buoy assembly for inspection prior to commencing fabrication of the remainder of the articles. This requirement may be waived at the contracting officer’s discretion if the contractor has successfully completed a DART buoy hull contract in the past

5.0 DELIVERABLES

All deliverables shall be shipped to the following address:

National Data Buoy Center Attn: Property Officer Building 3203 Stennis Space Center, MS 39529

ISOMETRIC VIEW

NTS

EXPLODED VIEW

SCALE 1 : 10

A A

B B

C C

D D

D R

AW

IN

G

S

TA

TE

SHEET 1 OF 3

APPROVED

V.ROBINSON

D.BROWN/I.CRAFT

V.ROBINSON 2/4/2010

DWG NO

D020011

TITLE

DART II BUOY PAYLOAD COMPARTMENT

ASSEMBLY

SIZE

D

REV

C

NATIONAL DATA BUOY CENTER

John C. Stennis Space Center

Stennis Space Center, Mississippi 39529

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

TOLERANCES

DECIMALS ANGULAR

.XX +/- .05 +/- .5

.XXX +/-.010 .

DO NOT SCALE DRAWING

APPLICATION

-NO. HULL NO. NEXT ASSY. USED ON

NDBC PROJ. ENGINEER

NTSC ENGINEER

CHECKED

DRAWN

APPROVALS DATE

CONTRACT NO.

2/4/2010

7/8/2008

CHAIR, ENGINEERING REVIEW BOARD

CHANGE ORDER #

B.HANSEN

QA1330-05-CQ-1035

2/2/2010

B.HANSEN 2/2/2010

D020012 DART II

SCALE

P08-0027

93A7D030052 DART II LOWER HEX WELL NDBC1

8 REMOVED PER REV A.

7 REMOVED PER REV C.

63C6D030063 DART II BUOY WELL CABLE PASS THRU NDBC1

52C6D030062 DART II RUBBER HANDLE MOUNTING TAB NDBC4

42B6D030060 DART II MOUNTING BLOCK NDBC4

33C7D030050 DART II BUOY WELL FLANGE NDBC1

23B7D030051 DART II UPPER CYLINDRICAL WELL NDBC1

13A6D030061 DART II BUOY WELL THREADED SOCKET WELDMENT NDBC1

PARTS LIST

ITEMZONEPART/SPEC. NO.NDBC CONT. NO.DESCRIPTIONNOTESVENDORQTY.

NOTES:

REMOVED PER REV A.

REMOVED PER REV A.

REMOVED PER REV A.

BUOY PAYLOAD COMPARTMENT COMES ASSEMBLED AS PART OF BUOY.

SECURE TO BOTTOM OF THE COMPARTMENT WITH GLASS.

USE LAY-UP GLASS ON BOTH SIDES TO REINFORCE THE JOINT.

THE FIBERGLASS LAY-UP SHALL BE LAYERED WITH A COMBINATION OF BULK

FIBERGLASS, APPLIED BY CHOPPER GUN AND 24 OZ ROVING. EQUAL BI-DIRECTIONAL

±45° STRAND MATERIAL MAY BE SUBSTITUTED FOR 24 OZ ROVING. RESIN TO GLASS

RATIO SHALL BE APPROXIMATELY 65 TO 35.

LOCATED ON EACH NOTCH.

1.

2.

3.

4.

7.

REVISION HISTORY

ZONE REV DESCRIPTION DATE APPROVED

GEN C

REPLACES WITH CHANGE D020011.DWG REV B,

PER ECP P14-0019. FOR PREVIOUS REVISIONS SEE

HISTORY. REDRAWN FROM AUTOCAD TO

INVENTOR. UPDATED PARTS LIST, APPLICATION

BLOCK, NOTES, AND FIELD OF DRAWING.

REMOVED PART 7.

M.DUNCAN 10/21/14 J.GALTERIO 10/19/15

L.RABALAIS 5/26/16

C

C

C

C

C

C

C

C

4x 1 2

1 3

TOP VIEW

SCALE 1 : 4

VIEW A-A

NTS

SECTION B-B

NTS

A A

B B

C C

D D

D R

AW

IN

G

S

TA

TE

SHEET 2 OF 3

DWG NO

D020011

SIZE

D

REV

C

SCALE

A

A

B

B

MOUNTING BLOCK & RUBBER HANDLE TAB PLACEMENT

1 2

4x

C

4x

.37 FROM

BOTTOM OF

FLANGE

3 REF

CENTERED

ON SLOT

CENTERED

ON SLOT

2.188

BOND FLANGE

TO WELL

9.06

18.12

12.75

25.50

FRONT VIEW

NTS

SECTION C-C

NTS

A A

B B

C C

D D

D R

AW

IN

G

S

TA

TE

SHEET 3 OF 3

DWG NO

D020011

SIZE

D

REV

C

SCALE

C

C

C

C

C

C

BUOY PAYLOAD COMPARTMENT ASSEMBLY

1 3

1 5

4.80

60° 30°

30° 60°

4.80

45° TO

CENTER OF

SLOT

A

B

.125 A

.0625 B

40.00

45.69

59.50

40.00

59.75 60.43

.125 A

A A

B B

C C

D D

D R

AW

IN

G

S

TA

TE

SHEET 1 OF 4

APPROVED

V.ROBINSON

F.LOSSETT/I.CRAFT

V.ROBINSON 2/4/2010

DWG NO

D020012

TITLE

DART II BUOY HULL ASSEMBLY

SIZE

D

REV

C

NATIONAL DATA BUOY CENTER

John C. Stennis Space Center

Stennis Space Center, Mississippi 39529

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

TOLERANCES

DECIMALS ANGULAR

.XX +/- .05 +/- .5

.XXX +/-.010 .

DO NOT SCALE DRAWING

APPLICATION

-NO. HULL NO. NEXT ASSY. USED ON

NDBC PROJ. ENGINEER

NTSC ENGINEER

CHECKED

DRAWN

APPROVALS DATE

CONTRACT NO.

2/4/2010

5/5/2008

CHAIR, ENGINEERING REVIEW BOARD

CHANGE ORDER #

B.HANSEN

QC133005CQ1035

2/1/2010

B.HANSEN 2/2/2010

D010001 DART II

154A2 PIPE, PLASTIC, 3.00", SCH. 40, PVC 44.00"

141D6D030095 DART II BUOY WELL LID NDBC1

13 REMOVED PER REV C.

12 REMOVED PER REV C.

11 REMOVED PER REV C.

10 REMOVED PER REV C.

9 REMOVED PER REV C.

81B5D030083 DART II RUBBER BUMPER ATTACHMENT NUT NDBC12

7 REMOVED PER REV C.

6 REMOVED PER REV C.

51D5D030043 DART II INTERNAL BUOY STRUCTURE NDBC1

41C5,3D5D030048 DART II FIBERGLASS HULL DECK NDBC1

31C5,3D3D030047 DART II FIBERGLASS HULL SHELL NDBC1

21C8,4C8D030053 DART II CABLE PIPE DECK FLANGE NDBC1

12D5D020011 DART II BUOY PAYLOAD COMPARTMENT ASSEMBLY NDBC1

PARTS LIST

ITEMZONEPART/SPEC. NO.NDBC CONT. NO.DESCRIPTIONNOTESVENDORQTY.

REVISION HISTORY

ZONE REV DESCRIPTION DATE APPROVED

GEN C

REPLACES WITH CHANGE D020012.DWG REV B,

PER ECP 14-0019. FOR PREVIOUS REVISIONS SEE

HISTORY. REDRAWN FROM AUTOCAD TO

INVENTOR. UPDATED PARTS LIST, APPLICATION

BLOCK, AND TITLE BLOCK. ADDED SHEETS/VIEWS.

REVISED FIELD OF DRAWING.

M.DUNCAN 10/21/14 J.GALTERIO 10/22/15

L.RABALAIS 6/27/16

C

C

1 VERTICAL DIMENSIONS DO NOT INCLUDE FIBERGLASS AND GEL COAT

LAYERS INDICATED.

NOTES:

C

C

C

12x

SECTION A-A

NTS

A A

B B

C C

D D

D R

AW

IN

G

S

TA

TE

SHEET 2 OF 4

DWG NO

D020012

SIZE

D

REV

C

SCALE

A A

C

C

VOID FILLED WITH

URETHANE FOAM

LAY GLASS ALL AROUND

AS SHOWN, MUST BE

WATERPROOF

UPPER BUOY SURFACE: (FROM

VERTICAL FLAT TO THE BUOY

TOP): .50 GLASS WITH 3 LAYERS

OF 24 OZ. ROVING & A 30 MIL

GEL COAT

.50 DEEP GROOVE FOR

RUBBER BUMPER

3.70 MIN

BOTTOM OF BUOY IS: .25

THICK GLASS WITH 1 LAYER

OF 24 OZ. ROVING AND A

30 MIL GEL COAT

LOWER BUOY SURFACE: TAPERS FROM .25 GLASS WITH 24 OZ

ROVING TO CREATE .38 GLASS WITH 24 OZ ROVING WITHIN

12.00 OF BOTTOM AND A 30 MIL GEL COAT.

MID BUOY SURFACE: TAPERS FROM .38 GLASS WITH

24 OZ ROVING TO .50 GLASS WITH 24 OZ

ROVING AT VERTICAL FLAT AND

A 30 MIL GEL COAT

TOP OF BUOY IS: .50 GLASS

WITH 2 LAYERS OF 24 OZ. ROVING

& A 30 MIL GEL COAT WITH NON-

SKID COATING

THE INTERIOR BUOY STRUCTURE IS:

OVERLAYED WITH .38 OF GLASS,

ALL AROUND, BOTTOM OF PLATES

TO BOTTOM OF INSIDE OF

BUOY, WITH 2 LAYERS OF ROVING

47.00

82.00

89.50

96.00

42.25

FRONT VIEW

SCALE 1 : 8

A A

B B

C C

D D

D R

AW

IN

G

S

TA

TE

SHEET 3 OF 4

DWG NO

D020012

SIZE

D

REV

C

SCALE

C

GLASS IN RUBBER BUMPER MOUNTS

WITH .38 GLASS LAMINATE WITH 3 LAYERS OF

24 OZ. ROVING TO INSIDE OF BUOY.

30°~

CUT OUT HOLE IN BUOY TOP FOR BUOY WELL

DROP IN BUOY WELL, GLASS TO TOP

OF BUOY, AND THEN FILL

BUOY WITH FOAM.

45°

NOTCH BUOY TOP AND BOTTOM 4x FOR

INTERNAL METAL FRAMEWORK.

FILL VOID BETWEEN FIBERGLASS

AND STEEL WITH A POLYURETHANE

OR POLYSULFIDE CAULK

FOR A WATERTIGHT SEAL.

2.00

(4.00)

95.00Ø

.8812x THRU

ON Ø95.00 BC

EQUALLY SPACED

GLASS IN 3.00" SCH 40 PVC PIPE,

THRU TOP AND BOTTOM HOLES,

MUST BE WATERTIGHT

CUT OUT HOLE IN BUOY DECK

FOR BUOY WELL, GLASS TO TOP

OF BUOY AND THEN FILL

BUOY WITH FOAM

18.50

14.50

BOTTOM VIEW

BREAK OUT VIEW

NTS

SIDE VIEW

NTS

A A

B B

C C

D D

D R

AW

IN

G

S

TA

TE

SHEET 4 OF 4

DWG NO

D020012

SIZE

D

REV

C

SCALE

VOID FILLED WITH

URETHANE FOAM

9.63

16.03

REF D010007 FOR BUOY

IDENTIFICATION AND PAINTING C

C

C

PVC PIPE DETAIL

.74 43.26 44.00

FRONT VIEW

NTS

ISOMETRIC VIEW

NTS

A A

B B

C C

D D

D R

AW

IN

G

S

TA

TE

5 REMOVED PER REV B.

42B6,2C7 BAR, METAL, FLAT, .375" x 4.00", 316 SST 87.300 in 32A2,2B2 PIPE, METAL, 1.00", SCH 10, 316 SST 218.000 in 22C2 ANGLE, .1875" x 2.00" x 2.00" x 84.00", 316 SST 195.200 in 12D4 BAR, METAL, FLAT, .50" x 6.00", 316 SST 4

PARTS LIST

ITEMZONEPART/SPEC. NO.NDBC CONT. NO.DESCRIPTIONNOTESVENDORQTY.

SHEET 1 OF 2

APPROV…