Region_5_Misc._Heavy_Equipment_Inspection_Check_Sheet.pdf

REGION 5 VIPR PRE-AWARD

MISC. HEAVY EQUIPMENT CHECK SHEET

Submission of this check sheet does not constitute submission of a quote. Quotes must be submitted in VIPR.

VENDOR NAME: _________________________________________________________________________ (As shown in VIPR profile)

CONTACT NAME: ________________________________________________________________________

ADDRESS: _______________________________________________________________________________

(As shown in VIPR profile)

PHONE NUMBER: ______________________________ EMAIL: __________________________________

EQUIPMENT MAKE:__________________________________ MODEL: ___________________________

VIN/SN#:_______________________________________ EQUIPMENT I.D. #________________________

A separate check sheet to be included for each UNIT

Feller Buncher Mulcher/Masticator (Boom Mounted) Strip Mulchers/Masticators Skidder Road Grader

The company name, equipment typing and serial number must be referenced on each photo, written clearly on the front or back of photo. The photo must allow Fire Staff to be able to determine Feller Buncher cutting head configuration, the inclusion of rippers, grapple configuration and the operator protection system.

1. A clear picture of the resource taken from the right rear corner.

2. A clear picture of the resource taken from the left front corner.

3. A clear picture of the manufacturers tag, with model, and serial number or VIN number affixed to piece of equipment.

4. A clear picture of manufactured certification of Rollover Protection System (ROPS) and/or Falling Object

Protection System (FOPS), whichever is required of the equipment under consideration.

5. Typing and Horsepower related to equipment being submitted: _________________________________

Photos will be utilized in determining attributes of resources made in offer. Photos may be black and white or color. Faxed copies may not show sufficient detail to confirm attributes and WILL NOT be accepted. If multiple offers are made for the same model of equipment, paint or tape a separate number, approximately 14" in height, either on the final drive or blade front and reference this number in your offer.

Required documentation listed above must be emailed to steves@fs.fed.us or sent hard copy NO LATER THAN THE

SOLICITATION CLOSING DATE to--

U.S. Forest Service

3237 Peacekeeper Way, Suite 101

McClellan, CA 95652

Attn: Steven Teves

*IF VENDOR WOULD LIKE TO VERIFY DELIVERY OF PACKAGE, PLEASE SEND WITH TRACKING.

mailto:steves@fs.fed.us