Questions.Response.Fix 4.23.2020.docx

Question- The 2” flooring required in the specification can be accomplished, but in doing so it is recommended that the crossmembers be lowered to accommodate the extra flooring thickness. This will increase cost and impact the production schedule due to the additional engineering effort involved. Would the government accept the flooring thickness at the recommended 1 ½ inch to avoid this cost and schedule impact?

Response- The document reflected nominal size and should read as the dimensional size.

Fix- Amendment 2 was accomplished to remove the color requirement (black) and the thickness requirement to read as the dimensional size 1.5” not the nominal size of 2”.