1.9_-_19-Q-0053_-_Williams_Farm_Common_Stand_Exams_Solicitation.pdf

1284N8-19-Q-0053 Williams Farm Bill Common Stand Exams

Intermountain Region

REGION 4 UTAH ACQUISITION SUPPORT CENTER INSTRUCTIONAL COVER SHEET

ISSUING OFFICE: U.S. DEPARTMENT OF AGRICULTURE

FOREST SERVICE

UTAH ACQUISITION SUPPORT CENTER

1749 WEST 500 SOUTH

SALT LAKE CITY, UT 84104

FAX (801) 908-1930

SOLICITATION NO: 1284N8-19-Q-0053

OFFERS ARE SOLICITED FOR: INTERMOUNTAIN REGION- R4, WILLIAMS FARM BILL COMMON STAND EXAMS, (INTERMOUNTAIN REGION)

This project is set aside 100% for small business

IMPORTANT – NOTICE TO OFFEROR:

AT A MINIMUM, OFFEROR SHALL SUBMIT THE FOLLOWING DOCUMENTS BACK WITH THEIR RESPONSE TO THIS SOLICITATION:

1. SF-1449 – SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS (Complete, Date and Sign)

2. SCHEDULE OF ITEMS

3. TECHNICAL RESPONSE AS IDENTIFIED IN EVALUATION FACTORS FOR AWARD

4. Part 26, OFFEROR REPRESENTATIONS AND CERTIFICATIONS. Paragraph (q) (2) of provision 52.212-3. (PAGE 50).

5. EXPERIENCE/EQUIPMENT QUESTIONNAIRE

6. SUBCONTRACTOR FORM (IF APPLICABLE)

Ensure the solicitation number is on the outside of your envelope and retain a copy of solicitation for your records.

Return to: USFS - Region 4 - Utah Acquisition Support Center ATTN: Kenneth Miller 1749 West 500 South Salt Lake City, UT 84104 Solicitation No: 1284N8-19-Q-0053

Please keep a copy of your quote for your records.

AN AWARD WILL BE MADE FROM THIS SOLICITATION WHEN THE EVALUATION OF OFFERS HAS BEEN COMPLETED WHICH IS ANTICIPATED TO OCCUR SHORTLY AFTER THE CLOSING DATE OF THE SOLICITATION. IN ORDER TO BE CONSIDERED FOR ANY AWARD, IT IS REQUIRED THAT CONTRACTORS BE REGISTERED, ACTIVE AND VALID IN THE SYSTEM FOR AWARD MANAGEMENT (SAM) DATABASE AT THE TIME THAT AWARD WILL BE MADE. REFERENCE FAR 52.204-7 SYSTEM FOR AWARD MANAGEMENT. IT IS RECOMMENDED THAT IF YOU ARE A CONTRACTOR THAT WILL BE RESPONDING TO THIS SOLICITATION AND NOT CURRENTLY REGISTERED, ACTIVE AND VALID IN THE SAM DATABASE, THAT YOU IMMEDIATELY BEGIN THE PROCESS. CONTRACTORS MUST ALSO MEET THE SMALL BUSINESS

SIZE STANDARD OF THE NAIC’S CODE THAT THIS SOLICITATION IS ISSUED UNDER

THIS IS THE ONLY NOTICE THAT CONTRACTORS WILL GET INSTRUCTING THEM TO COMPLETE THE SAM REGISTRATION PROCESS IF THEY HAVE NOT ALREADY DONE

SO. THE WEBSITE IS https://www/sam.gov/portal/SAM/#1.

ALL SOLICITATIONS SHALL BE ISSUED THROUGH THE FEDERAL BUSINESS OPPORTUNITIES (www.fbo.gov).

IT IS THE OFFERORS RESPONSIBILITY TO WATCH FOR ANY AND ALL AMENDMENTS TO THE SOLICITATION, WHICH SHALL BE ISSUED ELECTRONICALLY THROUGH THE

FEDERAL BUSINESS OPPORTUNITIES WEBSITE.

http://www.fbo.gov/

SOLICITATION/CONTRACT/ORDER FOR

COMMERCIAL ITEMS

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, & 30

1. REQUISITION NUMBER PAGE 2 of 53

951666

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER 5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

1284N8-19-Q-0053 05/03/2019

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME b. TELEPHONE NUMBER (No collect calls) 8. OFFER DUE DATE/LOCAL

Kenneth Miller, Purchasing Agent

801.908.1905

05/17/2019 at 0900 MST Local Time

9. ISSUED BY: CODE 10. THIS ACQUISITION IS 11. DELIVERY FOR

FOB DESTINATION

UNLESS BLOCK IS

MARKED

SEE

SCHEDULE

12. DISCOUNT TERMS

Utah Acquisition Support Center 1749 West 500 South Salt Lake City, UT 84104

( ) UNRESTRICTED

(X) SET AIDE: 100 % FOR

(X) SMALL BUSINESS

( ) SMALL DISAV. BUSINESS

( ) 8(A) 13a. THIS CONTRACT IS A RATED

ORDER UNDER DPAS (15 CFR 700)

NAICS: 115310 13b. RATING

SIZE STANDARD: $7.5 Million 14. METHOD OF SOLICITATION

RFQ IFB RFP

15. DELIVER TO CODE 16. ADMINISTERED BY CODE

See Schedule Utah Acquisition Support Center 17a. CONTRACTOR/ OFFEROR CODE FACILITY

CODE 18a. PAYMENT WILL BE MADE BY CODE

(see block 9)

TELEPHONE NO. DUNS#

FAX NO. TIN#

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN OFFER 18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK

IS CHECKED SEE ADDENDUM

19.

ITEM NO.

20.

SCHEDULE OF SUPPLIES/SERVICES

21.

QUANTITY

22.

UNIT

23.

UNIT PRICE

24.

AMOUNT

See attached Schedule of Items

(Attach Additional Sheets as Necessary)

25. ACCOUNTING AND APPROPRIATION DATA 26. TOTAL AWARD AMOUNT (For Govt. Use Only)

27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1, 52.212-4. FAR 52.212-3 AND 52.212-5 ARE ATTACHED. ADDENDA ARE ARE NOT ATTACHED 27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCES FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN 1 COPIES

TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND DELIVER ALL ITEMS SET

FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY ADDITIONAL SHEETS

SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED HEREIN.

29. AWARD OF CONTRACT: REFERENCE ___________________ OFFER

DATED ______________________. YOUR OFFER ON SOLICITATION

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER) 30b. NAME AND TITLE OF SIGNER (Type or print) 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER (Type or print) 31c. DATE SIGNED

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED ACCEPTED, AND CONFORMS TO

THE CONTRACT, EXCEPT AS NOTED

33. SHIP NUMBER 34. VOUCHER NUMBER 35. AMOUNT VERIFIED

CORRECT FOR

PARTIAL FINAL

36. PAYMENT 37. CHECK NUMBER

32b. SIGNATURE OF AUTHORIZED GOVT. 32c. DATE COMPLETE PARTIAL FINAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

42a. RECEIVED BY (Print) 41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE 42b. RECEIVED AT (Location)

42c. DATE REC’D (YY/MM/DD) 42d. TOTAL CONTAINERS

AUTHORIZED FOR LOCAL REPRODUCTION SEE REVERSE FOR OMB CONTROL NUMBER AND

PAPERWORK BURDEN STATEMENT

STANDARD FORM 1449 (10-95)

Prescribed by GSA – FAR (48 CFR) 53.21

1. Schedule of Items

Invoice Processing Platform (IPP)

The Forest Service is utilizing the Invoice Processing Platform (IPP) for the electronic submission and tracking of contracts/purchase orders, invoices, and payment information. IPP is a secure Government-wide, Web-based invoice processing service. Visit http://www.ipp.gov to learn more.

Upon award of a contract, Contractors will be enrolled automatically. Contractor will subsequently receive electronic notification from IPP of enrollment. IPP password will be delivered electronically to allow first login to IPP. Contractors shall submit all invoices electronically via IPP. Paper copies of invoices will no longer be accepted.

Name of Company (please print):

DUN’s Number:

Printed Name of Company Agent:

Signature of Company Agent:

Date:

Phone Number:

Email Address:

Item # Description

Unit of Measure

Est.

Quantity Unit Price

Amount

1.1 Common Stand Exam (CSE) with Browns Transects

Plot 229 $

1.2 Common Stand Exam (CSE)

Plot 174 $

TOTAL

http://www.ipp.gov/

2. EFFECTIVE PERIOD OF THE CONTRACT (AGAR 452.211-75)(FEB 1988)

The effective period of this contract is from Award through TBD (Expecting to start 6/1/2019) through 11/1/2019.

3. AWARD CRITERIA

BASIS OF AWARD: Award will be determined by the funds which are available at the time of quote opening. An award shall be made to the contractor whose offer is most advantageous to the Forest Service based on the following criteria.

EVALUATION CRITERIA: Cost to the Forest Service is not expected to be the controlling factor in the selection of a Contractor for this solicitation. This will be a “Best Value” contract.

The following factors will be used for evaluation of each offer:

• Past Performance

• Relevant Experience

• Available Qualified Personnel

• Available Equipment

• Price

The Forest Service reserves the right to make an award on the basis of initial offers received.

4. GOVERNMENT REPRESENTATIVE:

The contractor shall provide a contract representative for the performance of the work. The name of this person and an alternate(s) who shall act for the contractor when the contractor is absent shall be designated in writing to the contracting officer. The contractor representative or alternate shall have full authority to act for the contractor on all contract matters relating to daily operation of this contract. The contractor representative and alternate(s) must be able to read, write, speak, and understand English.

Point of Contact:

Jim Hudson Title Forest Service Address City, State Zip Phone Email

Contracting Officer:

Kenneth Miller Purchasing Agent Utah Acquisition Support Center 1749 West 500 South Salt Lake City, UT 84104 801-908-1905 Kenneth.C.Miller@usda.gov

5. DESCRIPTION/SPECIFICATIONS/STATEMENT OF WORK

5.1. Background

The North Zone of the Salmon-Challis National Forest requests a quotation to collect Timber Stand Exam Data in accordance with the US Forest Service Common Stand Exam (CSE) protocols. The purpose of this contract is to provide the Government with natural resource information of forested vegetation within the Williams Farm Bill project area where silvicultural treatments may occur.

5.2. Scope of Contract

The Forest Service proposes to contract for technical forestry services to conduct the field phase of a stand exam project. The stand exam will provide the Government with natural resource information for forested and other lands at an intensity required for management decisions.

The Contractor shall furnish all labor, equipment, transportation, supervision, supplies (except those designated as Government-furnished), incidentals, and perform all work necessary to conduct stand examinations in compliance with terms, specifications, conditions, and provisions of this solicitation.

5.3. Location and Description

The project is located on the Salmon-Cobalt Ranger District on the Salmon-Challis National Forest.

See Attachment 1 and 2 for project area vicinity maps. Individual stand locations shall be delineated on contract work maps, which shall be furnished to the successful offeror at pre-work meeting.) Copies of aerial photos or computer generated images shall be provided upon contractor request.

PA site list of plots to be surveyed, arranged by location and stand number, is included as Attachment 3 and 4.

Work will consist of locating, establishing, measuring and recording data for sample points. A map of the general inventory area, and locations is included in the attached exhibits.

5.4. Accessibility

The Contractor shall be responsible for obtaining all necessary permission to gain access across private land to sample locations on Forest Service land. If the Contractor cannot obtain permission to access a sample location, the Contractor must notify the Government in writing.

Accessibility may be determined from aerial photographs and maps which shall be furnished by the Forest Service. Contractor will be responsible for adhering to the U. S. Forest Service travel management plan, including yearlong or seasonal closures to motor vehicles, as illustrated in the exhibits, unless authorization is obtained. Maps and photos may indicate that a road goes to the stand, however, vehicle access may be difficult or restricted. Stand locations may necessitate that Contractor walk to the stand or acquire some other means of travel.

5.5. Boundaries

Project boundaries may be identified by topo maps furnished by the Government and physical features shown on vicinity maps.

6. TECHNICAL SPECIFICATIONS

6.1. Stand Examination Instructions

Plot Location Procedure.

1. The Contractor shall locate plots within stands using GPS coordinates provided by the Government. Actual plot location shall be offset 1 chain at perpendicular from any road – open or closed. A Road shall be defined as the bottom of the fill slope to the top of the cut slope.

Any off-set plot centers must be GPSed and lat/long identified. Note in plot remarks why plot was off-set and directions to adjusted plot center.

2. The Contractor shall identify sample plot centers with wire flags, wooden stakes, or natural stakes, as agreed upon at the prework conference. Upon inspection, the point where a wire flag or natural stake intersects the ground or the top center of a wooden stake shall be used as plot center. Sample plot center markers shall be firmly secured in the ground. Flagging (color agreed upon at pre-work) shall be tied above the plot center on two sides. The location, stand, plot number and examiner initials shall be written legibly on the flagging using a waterproof marker

6.2. Plot Acquisition Procedure Using Global Positioning System (GPS)

The Contractor shall set up the GPS receiver and software as referenced below:

1. The Contractor shall provide a GPS receiver that has the ability to obtain the stated accuracy standard of 50 feet in the horizontal dimension.

2. All GPS data shall be collected using geographic coordinate system Latitude/Longitude, and Geodetic Datum NAD83.

3. The latitude and longitude of established plot center will be entered into the plot data form.

6.3. Recording Instruction

The forms for data collection are provided in the exhibits. The data fields to be collected on each form are enumerated in the Supplemental Specifications.

Data shall be recorded electronically using one or more of the following:

Government provided Exams PDR program. The ExamsPDR program runs on several types of PDR style computers with the Windows CE or Windows Pocket PC operating system..

Government provided ExamsPC program. The ExamsPC data entry program runs on computers with the Windows 7 or 10 operating system.

This may require data to be recorded on paper forms in the field and then entered into the ExamsPC program at a later time.

The contractor is responsible for providing the computer hardware necessary for running the software program/s.

7. SUPPLEMENTAL SPECIFICATIONS

This section describes the forms, and the fields within each form, to be completed.

7.1. Setting Form

A setting is normally a stand in which the stand exam is being done. Following is a list of data fields required for each setting. Detailed information and lists of valid codes for each data field are found in the Common Stand Exam (CSE) Field Guide Region 4.

Potential Vegetation will be recorded using the Forest Habitat Types of Central Idaho, Steele et al., 1981.

The dominant plant association phase shall be recorded for each stand.

Stand Sketch & Notes will be used to record RP description, traverse information and a general stand sketch.

Field # Field Name Required Data source Remarks 1 Project Name YES Government Williams Farm Bill 2 Proclaimed Region YES Government Code: 04 3 Proclaimed National Forest YES Government Code: 13 4 District YES Government Code: 01 5 Location YES Government See Site List 6 Stand Number YES Government See Site List 7 Ownership YES Government Code: USFS 8 State YES Government Code: ID 9 County YES Government Code: 59 10 Administrative Forest YES Government Code: 13 11 Date YES Contractor 12 Photo ID NO 13 Examination Level YES Government Code: 2020 (w/DW) & 2000 (wo/DW) 14 Exam Purpose YES Government Code: SE 15 Stratum NO 16 Existing Vegetation Cover Type N YES Contractor Appendix E, Table 9/CSE Field Guide 17 Potential Vegetation Reference YES Government Code: 401 18 Potential Vegetation YES Contractor Appendix G of CSE Field Guide 19 Structure N YES Contractor 20 Capable Growing Area N YES Contractor 21 Fuel Model Y NO C 22 Elevation YES Contractor 23 Aspect YES Contractor 24 Slope YES Contractor 25 Slope Position YES Contractor 26 Acres YES Government See Site List 27 Radial Growth Interval YES Government Code: 10 28 Radial Growth Interval #2 NO 29 Height Growth Interval NO 30 Fuel Photo Reference NO 31 Precision Protocol YES Government Code: CSE 32 Examiner YES Contractor 33 Setting Remarks YES Contractor * 34 Setting Damage Category NO 35 Setting Damage Agent NO 36 Setting Damage Severity NO 37 Species of Management Interest NO 38 Sketch Map and Traverse Notes YES Contractor

All setting fields are included on the sample setting form provided in the exhibits.

* Include comments on noteworthy conditions such as fire history, presence of plantation, thinning treatments and damage that negatively affects the stand. Record observed species of interest within stand such as aspen, whitebark pine etc. If there are GPS issues, note that too.

Space – 255 characters.

7.2. Sample Design

The Basal Area Factor shall be BAF 20.

A 1/100-acre plot size will be used for the small tree fixed plot. On the fixed plot, sample all live trees 6" tall to 4.9" DBH.

The required Sample Design data are:

Item Description Required Data Source Comments Region YES Government Code: 04 Proclaimed Forest YES Government Code: 13 District YES Government Code: 01 Location YES Site List Stand Number YES Site List Form Type YES Government Sample Design Form Sample Selection Method YES Government Sample Design Form Sample Expansion Factor YES C/Government R Starting Azimuth NO Not collected Plots Installed YES Government See Site List Subpop Filter N YES Government Sample Design Form Remarks NO Not collected Selection Criteria Number NO Subpop Variable YES Government Sample Design Form Subpop Minimum Value YES Government Sample Design Form Subpop Maximum Value YES Government Sample Design Form

7.3. Plot Data

All fields for the Plot Data are on the Plot Data form included in the exhibits. The following items are required to be recorded at each plot.

Detailed information and lists of valid codes for each data item are found in the CSE Field Guide Region 4 and Appendices (see Government Furnished Property).

Region YES Government Code: 04 Proclaimed Forest YES Government Code: 13 District YES Government Code: 01 Location YES Site List Stand Number YES Site List Plot Number YES Site List Latitude YES Contractor Longitude YES Contractor Capable Grow Area YES Contractor Aspect YES Contractor Slope YES Contractor Slope Position YES Contractor Slope Horz Shape NO Slope Vert Shape NO Elevation YES Contractor T Existing Vegetation N YES Contractor Appendix E, Table 9/CSE Field Guide Potential Vegetation YES Contractor Appendix G of CSE Field Guide History NO History Date NO Fuel Model NO Residual Description Code NO Dist Seed Wall NO Plot Remarks YES Contractor

7.4. Tree Data

Begin recording standing tree data at azimuth 360 (North), progressing in a clockwise direction around plot center. Trees shall be recorded in the following order:

a. BAF 20 -variable radius plot

b. 1/100th -fixed radius plot

The following items are required for each tree, except as noted. Detailed information and lists of valid codes for each data field are found in the Common stand Exam Guide Region 4 and Appendices (see Government Furnished Property).

Field Name Required Data Source Required for:

Location YES Site List Stand Number YES Site List Plot Number YES Contractor A Tag ID YES Contractor All trees Tree Status YES Contractor All trees Growth Trees YES Contractor A 2) Species YES Contractor All trees 3) Tree Count YES Contractor All trees 4) Number of Stems NO DBH YES Contractor All trees Height YES Contractor All trees 5) Height to Crown NO Radial Growth YES Contractor Site Trees and Growth Sample trees 5+ inches DBH Radial Growth #2 NO Height Growth NO Tree Age YES Contractor Growth Sample trees 5+ inches DBH Crown Ratio YES Contractor all live trees 1.0+ inch DBH Crown Class NO Crown width NO Wildlife Use NO Log/Snag Decay YES Contractor All standing dead and down dead trees Cone Serotiny NO Tree Damage Category YES Contractor All trees Tree Damage Agent YES Contractor Tree Damage Part NO Tree Damage Severity YES Contractor All trees Tree Remarks YES Contractor All trees 6)

Due to the possibility of multiple damages per tree, the tree form included in the exhibits contains three Damage Category, Agent and Severity groups. The contractor is only responsible for identifying the three most severe damages per tree.

2) GST trees will only be collected on trees ≥ 5.0” DBH. The first 2 trees of each species, meeting DBH criteria, will be sampled per plot.

Need a minimum of 3 trees / species greater than 5.0” DBH per stand.

3) Aspen are considered acceptable species for both variable and fixed plots. No GST needed.

4) Seedlings and saplings of the same species on the fixed plot having an identical diameter class and damage category may be grouped.

Record the number of trees in each group.

5) Height for grouped seedlings and saplings may be averaged.

6) Info on limiting distances should be recorded here, including: diameter, tape slope, and measured distance. This info may also be recorded on a separate form, available at the prework.

7.5. Vegetation Composition

This form will not be collected

7.6. Ground Surface Cover

This form will not be collected

7.7. Down Woody Material

All fields for down woody material are on the Down Woody Material form included in the exhibits. The Down Woody transect shall be the first task performed after the establishment of the sample plot. Information will be collected using transects originating from plot center .

The transect length shall be 7 feet for tallied twigs with a diameter ≤ 2.9 inches and 27 feet for down woody material that is ≥ 3.0 inches diameter. Rotate the direction of the transect about 30 degrees from plot to plot as directed in the CSE Field Guide Region 4. Flag the end of each transect and write down DW on flagging.

The following items are required at each plot. Detailed information and lists of valid codes for each data item are found in the CSE Users Guide Region 4 and Appendices (see Government Furnished Property).

Plot Number YES Contractor First Duff YES Contractor Second Duff YES Contractor Fuel Depth NO Twig 1 (0-.24) YES Contractor Twig 2 (.25-.99) YES Contractor Twig 3 (1.0-2.99) YES Contractor Piece Count YES Contractor Decay Class YES Contractor Diameter YES Contractor Piece Length YES Contractor

All down woody fields, whether required by this contract or not are included on the down woody form provided in the exhibits. Fields not required by this contract are to be skipped on the form.

7.8. GOVERNMENT-FURNISHED PROPERTY

The Government will provide the following item(s) of Government property to the Contractor for use in the performance of this contract. This property shall be used and maintained by the Contractor in accordance with the provisions of the "Government Property" FAR clause contained elsewhere in the contract.

The Contractor shall be liable for all loss or damage of such Government-Furnished Property delivered to him until completion and final acceptance of work required under this contract.

Item Description Where, When, How Location and Access Map Location map with road locations. Provided at prework conference Common Stand Exam User’s Guide, appendices, and data collection forms

The USDA Forest Service’s Common Stand Exam Region 4, appendices, and data collection forms

Available from the internet website:

https://www.fs.fed.us/nrm/fsveg/#softw are

Topographic map/s. One set of maps covering the areas to be sampled with compartment numbers, stand numbers, and sample plot numbers.

Provided at prework conference.

Habitat Type Book One copy of the publication Provided at prework conference.

Motor Vehicle Use map Two copies of the MVUM. Provided at prework conference.

Use of Premises permit Permit to occupy the national forest in excess of time limits imposed in standard orders.

Provided when needed.

Common Stand Exam Inspection Form

One copy of inspection form Provided at prework meeting.

Portable Data Recorder software for CSE

One copy on flash drive upon request or can be downloaded from the internet site at:

http://www.fs.fed.us/nrm/fsveg/index.shtml

Provided at prework conference.

PC-based data entry software (MS Windows 7 or 10 operating system required).

One copy on flash drive upon request or can be downloaded from the internet site at:

http://www.fs.fed.us/nrm/fsveg/index.shtml

Provided at prework conference.

https://www.fs.fed.us/nrm/fsveg/#software https://www.fs.fed.us/nrm/fsveg/#software

GPS technical specifications.

GPS datum and waypoints to locate plot centers. Provided at prework conference.

Insect & Disease guides 1 copy of A Field Guide to Diseases & Insect Pests of Northern & Central Rocky Mountain Conifers

Provided at prework conference.

Flagging Flagging Provided at prework conference.

Above Government-Furnished Property shall be made available to the Contractor at the prework conference and receipted for under a work order issued by the Contracting Officers Representative.

Any of the above Government-Furnished Property that the Contractor chooses to use shall be receipted for under a work order issued by the Contracting Officers Representative.

All maps, overlays, and unused Government-Furnished items shall be returned to the Government upon completion of the job. Failure to do so may result in charges for damage or replacement.

Contractor assumes responsibility for the loading of software onto their PDR, the loss of data due to PDR malfunction or operator error, the downloading of stand exam data from the PDR to aUSB flash drive or other approved medium and data integrity on that medium until loaded on Government computers.

7.9. ExamsPC Requirements

Data collection software has been developed and tested on each of the following devices. Selecting a device will download a self-extracting file containing the software for that device, similar software that runs on any Windows 7 Forest Service desktop or laptop, Regional Templates, and help files.

If your device is not listed, look for a device with a similar platform and chipset. For additional information on individual devices, see CSE Compatible Windows CE Data Recorders. If you are not sure which device to choose, contact the PDR staff for assistance.

Device Platform Chipset File Date File Size

Dell Axim / Juniper Mesa Pocket PC StrongArm 206MHz 08/07/2018 7.4M iPaq (Compaq, HP) / Juniper Mesa Pocket PC StrongArm 206MHz 08/07/2018 7.4M

Itronix Q100, Q200 / FORGE Echo Pocket PC StrongArm 206MHz 08/07/2018 7.5M

Husky FS4 Handheld PC StrongArm 206MHz 08/07/2018 7.4M

Juniper Allegro CE Handheld PC StrongArm 206MHz 08/07/2018 7.4M

Juniper Allegro CX Handheld PC Intel XScale 400MHz 08/07/2018 7.4M

Juniper Allegro MX / Juniper Allegro 2 Pocket PC Intel XScale 624MHz 08/07/2018 7.4M

Juniper Archer Pocket PC Intel XScale 624MHz 08/07/2018 7.4M

Trimble / TDS Nomad / Juniper Mesa Pocket PC Marvell XScale 08/07/2018 7.4M

Trimble / TDS Ranger Pocket PC StrongArm 08/07/2018 7.4M

Trimble / TDS Recon Pocket PC Intel XScale 08/07/2018 7.4M

Trimble GeoXT (START button in upper left corner, including GeoXT 6000, even though it is different.)

Pocket PC StrongArm 206MHz 08/07/2018 7.4M

Trimble GeoXT (START button in lower left corner.)

Handheld PC StrongArm 206MHz 08/07/2018 7.5M

Trimble Juno Pocket PC Unavailable 08/07/2018 7.4M https://www.fs.fed.us/nrm/fsveg/wince_types.shtml https://www.fs.fed.us/nrm/fsveg/wince_types.shtml https://www.fs.fed.us/nrm/documents/fsveg/pdr/winpocketpc206_win7_v2.4.0.exe https://www.fs.fed.us/nrm/documents/fsveg/pdr/winpocketpc206_win7_v2.4.0.exe https://www.fs.fed.us/nrm/documents/fsveg/pdr/winpocketpc_qx00_win7_v2.4.0.exe https://www.fs.fed.us/nrm/documents/fsveg/pdr/winhandheldHuskyFS4_win7_v2.4.0.exe https://www.fs.fed.us/nrm/documents/fsveg/pdr/winhandheldAllegroCE_win7_v2.4.0.exe https://www.fs.fed.us/nrm/documents/fsveg/pdr/winhandheldAllegroCX_win7_v2.4.0.exe https://www.fs.fed.us/nrm/documents/fsveg/pdr/winhandheldTDSRanger_win7_v2.4.0.exe https://www.fs.fed.us/nrm/documents/fsveg/pdr/winpocketpc206_win7_v2.4.0.exe https://www.fs.fed.us/nrm/documents/fsveg/pdr/winpocketpc206_win7_v2.4.0.exe https://www.fs.fed.us/nrm/documents/fsveg/pdr/winhandheldTDSRanger_win7_v2.4.0.exe https://www.fs.fed.us/nrm/documents/fsveg/pdr/winpocketpc206_win7_v2.4.0.exe https://www.fs.fed.us/nrm/documents/fsveg/pdr/winpocketpc206_win7_v2.4.0.exe https://www.fs.fed.us/nrm/documents/fsveg/pdr/winhandheldGeoXT_win7_v2.4.0.exe https://www.fs.fed.us/nrm/documents/fsveg/pdr/winpocketpc206_win7_v2.4.0.exe wintabletpc / Acer Iconia / Trimble Yuma / Juniper Mesa2 (Note: contains only the Tablet PC version that will run under Windows 7, or newer.)

Windows 7 or newer Unavailable 08/07/2018 6.6M

7.9.1. Other Software

• examspc_win7_v2.4.0.exe (08/07/2018, 6.8M) - contains only the PC version that runs on Windows 7 and Windows 10. This requires that the Windows Mobile Device Center is installed on your Windows 7, or Windows 10, desktop or laptop computer.

• vcredist_x86.exe (05/17/2016, 4.0M) - This Microsoft Visual C++ Redistributable Package installs runtime components of Visual C++ Libraries required to run ExamsPC's Database Loader. This is required for ExamsDbLoader to work with ExamsPC v02.15.2010.3 and newer.

8. Inspections and Acceptance

Government inspections are for the purpose of satisfying the Government that the services are acceptable and do not relieve the Contractor of the responsibility for maintaining quality control.

The Contracting Officer's Representative or designated inspector will conduct all inspections. The Contractor (or designated representative) is encouraged to be present to observe inspections. Summary results will be made available on request.

Compliance Inspections. Visual compliance inspections will be made on a periodic basis. Such inspections are not final and do not constitute acceptance by the Government.

Final Inspections. Final (formal) inspections for payment will be made on completed sub-items only and at least 10% of the plots will be inspected by the Contracting Officer’s Representative or the designated inspector. Contractor shall request final inspections in writing and give the Forest Service at least two working days advanced notice. Inspections will be completed within five working days after the notice is received.

If the work is not ready for inspection at the time specified by the Contractor, the cost associated with the inspection attempt may be charged to the Contractor.

Disputed Inspection. The Contractor may request re-inspection without rework if the results are unacceptable. Re-inspection must be requested in writing within 48 hours after receiving written notice of the inspection results. Re-inspection will be accomplished within five working days after receipt of the contractor's written request.

The same sampling and inspection procedures will be used, but new samples will be taken. The inspection pattern will be shifted so that new samples will not overlap previously inspected samples. Results will be rounded to the nearest whole percent.

If re-inspection results are within five percentage points of the first inspection, the original inspection result will be used in determining acceptability and payment. If re-inspection results are greater than five percentage points above or below the first inspection, the re-inspection results will be used.

If the re-inspection results are within five percentage points of the first inspection, the Contractor shall pay the actual costs of the re-inspection.

Re-inspection after Rework. Where rework after a failed inspection may improve the inspection results, the Contractor may rework the area and request (in writing) a second inspection. The Government will charge to the Contractor the cost of this additional inspection. Re-inspection will be accomplished within five working days after the notice is received. The results of the second inspection will be final, and no further rework will be permitted. Areas not ready for re-inspection at the time specified by the Contractor will not be re-inspected, and the results of the first inspection will be final.

8.1. Specific Inspection Procedures

MEASURABLE PERFORMANCE STANDARDS

8.1.1. Quality Control Plan:

A Contractor Quality Control Plan shall be provided by the contractor as part of their technical proposal

8.1.2. Government Quality Assurance Surveillance Plan and Acceptance Requirements:

a. Government Quality Assurance Inspection.

The Government will make periodic inspections of the work to assure itself of contract compliance and to perform Quality https://www.fs.fed.us/nrm/documents/fsveg/pdr/wintabletpc_v2.4.0.exe http://www.fs.fed.us/nrm/documents/fsveg/pdr/examspc_win7_v2.4.0.exe https://www.fs.fed.us/nrm/documents/fsveg/pdr/vcredist_x86.exe

Assurance Inspections to confirm that the Contractor is performing quality control in accordance with its QCP.

b. Acceptance.

Acceptance of the work under the contract will be made after steps noted in the Government Quality Assurance Inspection have been taken and the Contracting Officer has made the determination of satisfactory compliance with the specifications.

Acceptance will not be made for segments broken by unacceptable portions of work.

8.1.3. Inspection, Re-inspection and Acceptance:

a. Compliance Inspection.

The Contracting Officer may, by formal inspection, determine if the specified methods of work have been used. Failure to use specified methods shall require prompt corrective action. Failure to take prompt and satisfactory corrective action may be cause for termination of Contractor’s right to proceed and the contract considered in default.

8.1.4. Inspection Procedures:

Inspection of the CSE plots will be done in accordance with the requirements found at https://www.fs.fed.us/nrm/fsveg/ under Appendix L: Accuracy Standards in the R4 Field Guide.

https://www.fs.fed.us/nrm/fsveg/

9. ATTACHMENTS:

Attachment Description Pages

ATTACHMENT 1 VICINITY MAP 1

ATTACHMENT 2 WILIAMS BILL PROJECT STANDS 1

ATTACHMENT 3 WILLIAMS FARM BILL PROJECTS / STAND PLOTS 5

ATTACHMENT 4 WILLIAMS FARM BILL PROJECTS / STAND PLOTS WITH BROWNS TRANSECTS 6

ATTACHMENT 5 FORM SF-1413 SUBCONTRACTOR 1

ATTACHMENT 6 EXPERIENCE AND EQUIPMENT QUESTIONAIRE (Contractor required to fill out and return with any offer submitted) 2

ATTACHMENT 7 WAGE DETERMINATION 3

ATTACHMENT 1 – VICINITY MAP

ATTACHMENT 2 – WILLIAMS FARM BILL PROJECT STANDS

ATTACHMENT 3 – WILLIAMS FARM BILL PROJECTS STANDS / PLOTS

Williams Farm Bill Stand Exams Plots Plot ID Plot # Stand Location Browns Lat Long

199 1 1 5122 No 45.10092 -114.078 200 2 1 5122 No 45.10086 -114.076 207 3 1 5122 No 45.10167 -114.08 208 4 1 5122 No 45.10272 -114.078 209 5 1 5122 No 45.10268 -114.077 153 1 2 5122 No 45.09566 -114.084 172 2 2 5122 No 45.09739 -114.081 173 3 2 5122 No 45.10043 -114.081 186 4 2 5122 No 45.09919 -114.081 187 5 2 5122 No 45.09908 -114.079 261 1 2 5118 No 45.11086 -114.045 262 2 2 5118 No 45.11079 -114.042 273 3 2 5118 No 45.11259 -114.042 274 4 2 5118 No 45.11253 -114.04 284 5 2 5118 No 45.11432 -114.04 292 6 2 5118 No 45.11526 -114.037 138 1 3 5122 No 45.09373 -114.079 139 2 3 5122 No 45.09366 -114.076 155 3 3 5122 No 45.09553 -114.079 156 4 3 5122 No 45.09546 -114.076 174 5 3 5122 No 45.09726 -114.076 175 6 3 5122 No 45.0972 -114.074 188 7 3 5122 No 45.09906 -114.076 198 8 3 5122 No 45.10099 -114.081 236 1 3 5118 No 45.10694 -114.051 237 2 3 5118 No 45.1082 -114.049 247 3 3 5118 No 45.1093 -114.051 259 4 3 5118 No 45.11106 -114.053 260 5 3 5118 No 45.11099 -114.05 271 6 3 5118 No 45.11276 -114.052 272 7 3 5118 No 45.11279 -114.05 282 8 3 5118 No 45.11459 -114.05 283 9 3 5118 No 45.11452 -114.047 254 1 4 5121 No 45.11622 -114.09 300 2 4 5121 No 45.11754 -114.09 316 3 4 5121 No 45.11708 -114.088 334 4 4 5121 No 45.11871 -114.088 355 5 4 5121 No 45.11634 -114.092 91 1 7 5122 No 45.08878 -114.082

107 2 7 5122 No 45.09026 -114.084 108 3 7 5122 No 45.0902 -114.082 109 4 7 5122 No 45.09032 -114.079 123 5 7 5122 No 45.09213 -114.087 124 6 7 5122 No 45.092 -114.081 125 7 7 5122 No 45.09193 -114.079 184 1 7 5121 No 45.09932 -114.086 185 2 7 5121 No 45.09925 -114.084 196 3 7 5121 No 45.10112 -114.086 197 4 7 5121 No 45.10105 -114.084 206 5 7 5121 No 45.10261 -114.083 216 6 7 5121 No 45.09819 -114.082 238 1 7 5118 No 45.10812 -114.045 248 2 7 5118 No 45.10978 -114.044

249 3 7 5118 No 45.109 -114.042 250 4 7 5118 No 45.10893 -114.04 263 5 7 5118 No 45.11073 -114.04 99 1 9 5122 No 45.08788 -114.061

131 2 9 5122 No 45.09148 -114.061 143 3 9 5122 No 45.09327 -114.061 144 4 9 5122 No 45.09321 -114.059 159 5 9 5122 No 45.09524 -114.066 160 6 9 5122 No 45.09467 -114.064 177 7 9 5122 No 45.097 -114.066 85 1 10 5122 No 45.08603 -114.054

101 2 10 5122 No 45.08775 -114.056 102 3 10 5122 No 45.08768 -114.054 103 4 10 5122 No 45.08762 -114.051 118 5 10 5122 No 45.08955 -114.056 119 6 10 5122 No 45.08948 -114.054 132 7 10 5122 No 45.09134 -114.056 134 8 10 5122 No 45.09121 -114.051 146 9 10 5122 No 45.09308 -114.053 100 1 13 5122 No 45.09128 -114.055 116 2 13 5122 No 45.09202 -114.054 117 3 13 5122 No 45.09261 -114.055 120 4 13 5122 No 45.09252 -114.053 133 5 13 5122 No 45.09128 -114.054 37 1 19 5122 No 45.08357 -114.059 38 2 19 5122 No 45.0848 -114.059 61 3 19 5122 No 45.08386 -114.062 63 4 19 5122 No 45.08415 -114.056 84 5 19 5122 No 45.08558 -114.057

137 1 20 5121 No 45.09625 -114.084 152 2 20 5121 No 45.09572 -114.086 154 3 20 5121 No 45.09454 -114.087 170 4 20 5121 No 45.09738 -114.086 171 5 20 5121 No 45.09746 -114.084 289 1 27 5121 No 45.11723 -114.083 290 2 27 5121 No 45.11779 -114.081 291 3 27 5121 No 45.11773 -114.078 299 4 27 5121 No 45.11788 -114.085 302 5 27 5121 No 45.1189 -114.078 301 1 28 5121 No 45.12008 -114.076 303 2 28 5121 No 45.11948 -114.075 304 3 28 5121 No 45.11886 -114.073 308 4 28 5121 No 45.12061 -114.077 309 5 28 5121 No 45.12078 -114.076 264 1 30 5121 No 45.11393 -114.093 275 2 30 5121 No 45.11587 -114.093 317 3 30 5121 No 45.11459 -114.092 333 4 30 5121 No 45.11307 -114.091 367 5 30 5121 No 45.11221 -114.092 265 1 31 5121 No 45.11383 -114.09 267 2 31 5121 No 45.11619 -114.086 276 3 31 5121 No 45.11563 -114.09 277 4 31 5121 No 45.11557 -114.088 287 5 31 5121 No 45.11812 -114.087 387 1 33 1102 No 45.14241 -114.081 388 2 33 1102 No 45.14234 -114.079 389 3 33 1102 No 45.14235 -114.074 392 4 33 1102 No 45.14433 -114.086

393 5 33 1102 No 45.14427 -114.084 394 6 33 1102 No 45.1442 -114.081 395 7 33 1102 No 45.14414 -114.079 396 8 33 1102 No 45.14407 -114.076 397 9 33 1102 No 45.14401 -114.074 398 10 33 1102 No 45.146 -114.081 399 11 33 1102 No 45.14547 -114.079 400 12 33 1102 No 45.14545 -114.076 401 13 33 1102 No 45.14543 -114.074 402 14 33 1102 No 45.14746 -114.079 145 1 49 5121 No 45.09337 -114.055 147 2 49 5121 No 45.09259 -114.051 161 3 49 5121 No 45.09507 -114.061 162 4 49 5121 No 45.09501 -114.058 163 5 49 5121 No 45.09494 -114.056 164 6 49 5121 No 45.09488 -114.053 293 1 60 1112 No 45.11927 -114.1 294 2 60 1112 No 45.11942 -114.098 295 3 60 1112 No 45.12004 -114.095 305 4 60 1112 No 45.12122 -114.098 306 5 60 1112 No 45.12115 -114.095 285 1 61 1112 No 45.11749 -114.093 286 2 61 1112 No 45.12072 -114.094 296 3 61 1112 No 45.11929 -114.093 297 4 61 1112 No 45.11923 -114.09 298 5 61 1112 No 45.11915 -114.088 239 1 65 1112 No 45.10949 -114.101 240 2 65 1112 No 45.11043 -114.098 241 3 65 1112 No 45.11037 -114.096 242 4 65 1112 No 45.1103 -114.093 244 5 65 1112 No 45.10926 -114.097 150 1 75 1112 No 45.09585 -114.091 166 2 75 1112 No 45.09778 -114.096 167 3 75 1112 No 45.09771 -114.094 181 4 75 1112 No 45.09949 -114.094 234 5 75 1112 No 45.09924 -114.096 122 1 76 1112 No 45.09238 -114.089 135 2 76 1112 No 45.09405 -114.092 136 3 76 1112 No 45.09399 -114.089 149 4 76 1112 No 45.096 -114.093 151 5 76 1112 No 45.09579 -114.089 168 6 76 1112 No 45.09765 -114.091 169 7 76 1112 No 45.09759 -114.089 307 1 78 1101 No 45.12109 -114.093 310 2 78 1101 No 45.12295 -114.095 311 3 78 1101 No 45.12289 -114.093 318 4 78 1101 No 45.12469 -114.092 319 5 78 1101 No 45.12462 -114.09 325 6 78 1101 No 45.12648 -114.092 326 7 78 1101 No 45.12642 -114.09 13 1 82 1111 No 45.08134 -114.087 30 2 82 1111 No 45.08314 -114.087 50 3 82 1111 No 45.085 -114.089 51 4 82 1111 No 45.08493 -114.087 52 5 82 1111 No 45.08487 -114.084 53 6 82 1111 No 45.0848 -114.082 71 7 82 1111 No 45.0868 -114.089 72 8 82 1111 No 45.08673 -114.087

73 9 82 1111 No 45.08667 -114.084 74 10 82 1111 No 45.0866 -114.082 89 11 82 1111 No 45.08853 -114.087 90 12 82 1111 No 45.08847 -114.084

106 13 82 1111 No 45.09014 -114.087

ATTACHMENT 4 – WILLIAMS FARM BILL PROJECTS STANDS / PLOTS WITH BROWNS TRANSECTS

Williams Farm Bill Stand Exams Plots with Browns Plot ID Plot # Stand Location Browns Lat Long

217 1 2 1112 Yes 45.09721 -114.09428 224 2 2 1112 Yes 45.09793 -114.095443 225 3 2 1112 Yes 45.09859 -114.096096 233 4 2 1112 Yes 45.09857 -114.097459 246 5 2 1112 Yes 45.09875 -114.098458 278 1 3 5121 Yes 45.11547 -114.084891 279 2 3 5121 Yes 45.11544 -114.082787 280 3 3 5121 Yes 45.11499 -114.080454 281 4 3 5121 Yes 45.11413 -114.078912 288 5 3 5121 Yes 45.1173 -114.085235 98 1 6 5122 Yes 45.08794 -114.063856

111 2 6 5122 Yes 45.08995 -114.073584 112 3 6 5122 Yes 45.08998 -114.071175 113 4 6 5122 Yes 45.09002 -114.068967 114 5 6 5122 Yes 45.08981 -114.066302 115 6 6 5122 Yes 45.08974 -114.063764 128 7 6 5122 Yes 45.09174 -114.071287 129 8 6 5122 Yes 45.09167 -114.068748 130 9 6 5122 Yes 45.09161 -114.06621 140 10 6 5122 Yes 45.09353 -114.071195 141 11 6 5122 Yes 45.09347 -114.068656 142 12 6 5122 Yes 45.09334 -114.06358 157 13 6 5122 Yes 45.09534 -114.073241 158 14 6 5122 Yes 45.09527 -114.068564 176 15 6 5122 Yes 45.09713 -114.071011 189 16 6 5122 Yes 45.09899 -114.073457 342 1 6 5112 Yes 45.12953 -114.048002 343 2 6 5112 Yes 45.12799 -114.047962 352 3 6 5112 Yes 45.12891 -114.048756 357 4 6 5112 Yes 45.12947 -114.046915 366 5 6 5112 Yes 45.12876 -114.047521 14 1 8 5122 Yes 45.08168 -114.057561 15 2 8 5122 Yes 45.08028 -114.057108 16 3 8 5122 Yes 45.08113 -114.064138 17 4 8 5122 Yes 45.08069 -114.061687 18 5 8 5122 Yes 45.08062 -114.059149 31 6 8 5122 Yes 45.08288 -114.076822 32 7 8 5122 Yes 45.08281 -114.074284 33 8 8 5122 Yes 45.08275 -114.071746 34 9 8 5122 Yes 45.08268 -114.069209 35 10 8 5122 Yes 45.08262 -114.066671 36 11 8 5122 Yes 45.08255 -114.064133 54 12 8 5122 Yes 45.08488 -114.079127 55 13 8 5122 Yes 45.08467 -114.076731 56 14 8 5122 Yes 45.08461 -114.074193 57 15 8 5122 Yes 45.08454 -114.071655 58 16 8 5122 Yes 45.08448 -114.069117 59 17 8 5122 Yes 45.08441 -114.066579 60 18 8 5122 Yes 45.08435 -114.064041 75 19 8 5122 Yes 45.08654 -114.079177 76 20 8 5122 Yes 45.08647 -114.076639 77 21 8 5122 Yes 45.08641 -114.074101 78 22 8 5122 Yes 45.08634 -114.071563 79 23 8 5122 Yes 45.08628 -114.069025

80 24 8 5122 Yes 45.08621 -114.066486 81 25 8 5122 Yes 45.08615 -114.063948 92 26 8 5122 Yes 45.08834 -114.079085 93 27 8 5122 Yes 45.08827 -114.076547 94 28 8 5122 Yes 45.08821 -114.074009 95 29 8 5122 Yes 45.08814 -114.071471 96 30 8 5122 Yes 45.08808 -114.068933 97 31 8 5122 Yes 45.08801 -114.066394

110 32 8 5122 Yes 45.09007 -114.076455 126 33 8 5122 Yes 45.09143 -114.076117 127 34 8 5122 Yes 45.09142 -114.073844

2 1 10 1122 Yes 45.08395 -114.11053 10 2 10 1122 Yes 45.08522 -114.110494 22 3 10 1122 Yes 45.08378 -114.112354 41 4 10 1122 Yes 45.08487 -114.114504 42 5 10 1122 Yes 45.08534 -114.112343 11 1 12 1122 Yes 45.08179 -114.104831 12 2 12 1122 Yes 45.08173 -114.102293 23 3 12 1122 Yes 45.08372 -114.109816 24 4 12 1122 Yes 45.08365 -114.107278 25 5 12 1122 Yes 45.08359 -114.10474 26 6 12 1122 Yes 45.08352 -114.102202 43 7 12 1122 Yes 45.0857 -114.109447 44 8 12 1122 Yes 45.08539 -114.104649

314 1 12 5117 Yes 45.12224 -114.067182 315 2 12 5117 Yes 45.12217 -114.064643 322 3 12 5117 Yes 45.12404 -114.06709 323 4 12 5117 Yes 45.12397 -114.06455 330 5 12 5117 Yes 45.12583 -114.066998 313 1 13 5117 Yes 45.12231 -114.068107 320 2 13 5117 Yes 45.1255 -114.069856 321 3 13 5117 Yes 45.1241 -114.06963 324 4 13 5117 Yes 45.1275 -114.066738 328 5 13 5117 Yes 45.1264 -114.067704 351 1 15 5112 Yes 45.12834 -114.049644 358 2 15 5112 Yes 45.13083 -114.051481 362 3 15 5112 Yes 45.13288 -114.053147 368 4 15 5112 Yes 45.13165 -114.049367 373 5 15 5112 Yes 45.12983 -114.049795

0 1 16 1122 Yes 45.07852 -114.117702 1 2 16 1122 Yes 45.07845 -114.115164 3 3 16 1122 Yes 45.08031 -114.117611 4 4 16 1122 Yes 45.08025 -114.115073 5 5 16 1122 Yes 45.08019 -114.112536 6 6 16 1122 Yes 45.08211 -114.117521 7 7 16 1122 Yes 45.08205 -114.114983 8 8 16 1122 Yes 45.08198 -114.112445 9 9 16 1122 Yes 45.08192 -114.109907

21 10 16 1122 Yes 45.08385 -114.114892 331 1 16 5117 Yes 45.12577 -114.064458 332 2 16 5117 Yes 45.12673 -114.063269 339 3 16 5117 Yes 45.12757 -114.064366 346 4 16 5117 Yes 45.12821 -114.065823 347 5 16 5117 Yes 45.12936 -114.064273 353 1 16 5112 Yes 45.12969 -114.046243 354 2 16 5112 Yes 45.12974 -114.044188 359 3 16 5112 Yes 45.13069 -114.047962 360 4 16 5112 Yes 45.1307 -114.046401

361 5 16 5112 Yes 45.13064 -114.043861 329 1 17 5117 Yes 45.1262 -114.069522 336 2 17 5117 Yes 45.12652 -114.071909 337 3 17 5117 Yes 45.1277 -114.069446 338 4 17 5117 Yes 45.12818 -114.067018 345 5 17 5117 Yes 45.12909 -114.069163 19 1 18 5122 Yes 45.08514 -114.060679 62 2 18 5122 Yes 45.08551 -114.059302 82 3 18 5122 Yes 45.08608 -114.06141 83 4 18 5122 Yes 45.08642 -114.06329 86 5 18 5122 Yes 45.08495 -114.06186 20 1 24 5122 Yes 45.08146 -114.054629 39 2 24 5122 Yes 45.08276 -114.057507 40 3 24 5122 Yes 45.08298 -114.055021 64 4 24 5122 Yes 45.08491 -114.054519 65 5 24 5122 Yes 45.08377 -114.052843

340 1 26 5117 Yes 45.12969 -114.063749 341 2 26 5117 Yes 45.12792 -114.0627 348 3 26 5117 Yes 45.1293 -114.061733 349 4 26 5117 Yes 45.12923 -114.059194 350 5 26 5117 Yes 45.12816 -114.057969 363 1 36 5112 Yes 45.13263 -114.051388 364 2 36 5112 Yes 45.13257 -114.048848 365 3 36 5112 Yes 45.13282 -114.045379 369 4 36 5112 Yes 45.1345 -114.053836 370 5 36 5112 Yes 45.13429 -114.051584 371 1 40 5112 Yes 45.13436 -114.048755 372 2 40 5112 Yes 45.1343 -114.046215 374 3 40 5112 Yes 45.13678 -114.051385 375 4 40 5112 Yes 45.13616 -114.048663 376 5 40 5112 Yes 45.13603 -114.043582 377 6 40 5112 Yes 45.1359 -114.038502 381 7 40 5112 Yes 45.13789 -114.046029 382 8 40 5112 Yes 45.13783 -114.043489 383 9 40 5112 Yes 45.13776 -114.040949 312 1 41 5117 Yes 45.12523 -114.0716 327 2 41 5117 Yes 45.12575 -114.071627 335 3 41 5117 Yes 45.12584 -114.0705 344 4 41 5117 Yes 45.12516 -114.07285 356 5 41 5117 Yes 45.12571 -114.072611 379 1 41 5112 Yes 45.13803 -114.05111 380 2 41 5112 Yes 45.13821 -114.048697 384 3 41 5112 Yes 45.13976 -114.048477 385 4 41 5112 Yes 45.13969 -114.045937 386 5 41 5112 Yes 45.13963 -114.043396 390 6 41 5112 Yes 45.14163 -114.045415 391 7 41 5112 Yes 45.14142 -114.043303 243 1 53 5121 Yes 45.11054 -114.088425 253 2 53 5121 Yes 45.11203 -114.090588 255 3 53 5121 Yes 45.1119 -114.08551 266 4 53 5121 Yes 45.11377 -114.087958 268 5 53 5121 Yes 45.11364 -114.082879 269 6 53 5121 Yes 45.11357 -114.08034 235 1 64 1112 Yes 45.11312 -114.093634 251 2 64 1112 Yes 45.11208 -114.095318 252 3 64 1112 Yes 45.1121 -114.093128 257 4 64 1112 Yes 45.11114 -114.096126

258 5 64 1112 Yes 45.11134 -114.094178 210 1 66 1112 Yes 45.10517 -114.103649 212 2 66 1112 Yes 45.10504 -114.098571 213 3 66 1112 Yes 45.10497 -114.096032 218 4 66 1112 Yes 45.10696 -114.103558 219 5 66 1112 Yes 45.1069 -114.101019 220 6 66 1112 Yes 45.10683 -114.09848 221 7 66 1112 Yes 45.10677 -114.095941 226 8 66 1112 Yes 45.10876 -114.103467 227 9 66 1112 Yes 45.1087 -114.100928 229 10 66 1112 Yes 45.10857 -114.095849 230 11 66 1112 Yes 45.1085 -114.09331 231 12 66 1112 Yes 45.10844 -114.090771 182 1 67 1112 Yes 45.09945 -114.091228 183 2 67 1112 Yes 45.09938 -114.088689 194 3 67 1112 Yes 45.10125 -114.091137 195 4 67 1112 Yes 45.10118 -114.088598 214 5 67 1112 Yes 45.10491 -114.093493 215 6 67 1112 Yes 45.10484 -114.090954 222 7 67 1112 Yes 45.1067 -114.093402 223 8 67 1112 Yes 45.10664 -114.090863 270 9 67 1112 Yes 45.10797 -114.090393 204 1 68 1112 Yes 45.10311 -114.093584 205 2 68 1112 Yes 45.10304 -114.091045 228 3 68 1112 Yes 45.10412 -114.093774 232 4 68 1112 Yes 45.1023 -114.095191 245 5 68 1112 Yes 45.10425 -114.091459 148 1 69 1112 Yes 45.10039 -114.099754 190 2 69 1112 Yes 45.1015 -114.101292 191 3 69 1112 Yes 45.10144 -114.098753 192 4 69 1112 Yes 45.10138 -114.096214 203 5 69 1112 Yes 45.10317 -114.096123 179 1 70 1112 Yes 45.09964 -114.098844 180 2 70 1112 Yes 45.10014 -114.096008 193 3 70 1112 Yes 45.10166 -114.094397 256 4 70 1112 Yes 45.10019 -114.093249 378 5 70 1112 Yes 45.10064 -114.097398 47 1 78 1111 Yes 45.08519 -114.097035 48 2 78 1111 Yes 45.08513 -114.094497 49 3 78 1111 Yes 45.08506 -114.091959 66 4 78 1111 Yes 45.08712 -114.10202 67 5 78 1111 Yes 45.08706 -114.099482 68 6 78 1111 Yes 45.08699 -114.096944 69 7 78 1111 Yes 45.08693 -114.094406 87 8 78 1111 Yes 45.0889 -114.097519 70 1 81 1111 Yes 45.08685 -114.09133 88 2 81 1111 Yes 45.0886 -114.089238

104 3 81 1111 Yes 45.09206 -114.090864 105 4 81 1111 Yes 45.09039 -114.089147 121 5 81 1111 Yes 45.09357 -114.092536 27 1 143 1122 Yes 45.08346 -114.099664 28 2 143 1122 Yes 45.08312 -114.097543 29 3 143 1122 Yes 45.08412 -114.101339 45 4 143 1122 Yes 45.08532 -114.102111 46 5 143 1122 Yes 45.08526 -114.099573

165 1 213 1112 Yes 45.10235 -114.098999 178 2 213 1112 Yes 45.10143 -114.100497 201 3 213 1112 Yes 45.1033 -114.101201

202 4 213 1112 Yes 45.10436 -114.09921 211 5 213 1112 Yes 45.1051 -114.10111

ATTACHMENT 5 – FORM SF-1413 SUBCONTRACTOR

ATTACHMENT 6 – EXPERIENCE & EQUIPMENT QUESTIONAIRRE

USDA Forest Service

EXPERIENCE QUESTIONNAIRE

Instructions: See Box 11, Remarks, if extra space is needed to answer any item below, Mark “X: in appropriate boxes.

1. Contractor Name, Address, and Telephone Number

2. Submitted to (Office Name and Address)

3. Business [ ] Company [ ] Co-partnership [ ] Corporation [ ] Individual [ ] Non-profit Organization

4. How many years do you or your firm have in the line of work contemplated by this solicitation?

5. How many years experience have you or your business had as a (a) prime contractor ____ and/or (b) sub-contractor ____?

6. List below the projects your business has completed within the last three years:

Contract Amount

Type of Project Date Completed

Name, Address, and Telephone No. of Owner/Person to Contact for Project Information

7. List below all of your firm’s contractual commitments running concurrently with the work contemplated by this solicitation:

Contract Number Dollar Amt. of Award

Name, Address, and Telephone No. of Business/Government Agency Involved

Awarded (Units)

Percent Completed

Date Contract Complete

8a. Have you ever failed to complete any work awarded to you? [ ] Yes [ ] No 8b. Has work ever been completed by performance bond? [ ] Yes [ ] No 8c. Did you look at the project site(s) on-the-ground? [ ] Yes [ ] No 8d. If “Yes” to either item 8a.