Attachment 2 Trailer Specs AMD 0001.docx
DOCX document 77 KB Posted
- Attached to
- USDA Forest Service Helitack Support Trailer Federal contract opportunity
- Solicitation number
- 1284LM26Q0016
- Issued by
- Department of Agriculture Forest Service
About this file
This is a trailer specifications document for the Helena-Lewis & Clark National Forest Helena Aviation Center, establishing the technical requirements for a dual axle bumper pull trailer to support Helitack and Helibase operations. The trailer must be a commercially available model with manufacturer-provided options and add-ons, measuring 20-22 feet in length (excluding tongue) with a minimum interior height of 7 feet and standard width of 8-8.5 feet to meet DOT regulations. The trailer must feature a flat top with V-nose design, a Gross Vehicle Weight Rating between 12,000 and 14,001 pounds, and wheels no smaller than 16 inches. The interior must include two rooms divided by a finished, insulated wall, with the office area positioned 6-8 feet from the rear and centered on the passenger side. The office room must have wrap-around desk space beneath windows extending to the passenger-side entrance door, with binder-sized cabinets above extending the full wall length but not into the V-nose. The rear room accommodates ramp-style doors with a standard 12-inch extension and continuous hinge for equipment storage and secure cargo management using E-Track systems. The trailer must include wood flooring with undercoating and wear-resistant surface rated for E-Track cargo systems, a climate-controlled office with heating and air-conditioning units, a minimum of five 110-volt household outlets (three positioned above desk areas), roof bows and wall posts on 24-inch centers, floor crossmembers on 16-inch centers, and an RV-style mechanical awning over the passenger-side door extending the trailer length. This amended specification document removes custom elements to ensure the trailer is commercially procurable through standard manufacturer options.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SF-30 AMD 0001.pdf | ||
| Attachment 1 Clauses Provisions and Submittal Intructions AMD 0001.docx | DOCX document | |
| Attachment 2 Trailer Specs.docx | DOCX document | |
| Attachment 3 Drawings.pdf | ||
| Attachment 1 Clauses Provisions and Submittal Intructions.docx | DOCX document |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Helena – Lewis & Clark National Forest Helena Aviation Center
Trailer Specifications The intent of this document is to specify the order of a dual axle bumper pull trailer. The base trailer should be commercially available with options/add-ons available through the manufacturer. The trailer will be utilized for transporting and securely storing Helitack specific equipment and supplies relating to Helibase and Helitack operations. In order to meet the needs of its intended use the trailer must be purchased according to the following specifications:
· Flat Top, V Nose Trailer not to be shorter than 20’ and not to exceed 22’ in length not including the tongue.
· Inside Height of the Trailer: Minimum 7’0”
· Standard width of trailer 8’- 8.5’ to meet DOT regulations
· Dividing interior wall must be finished and insulated (no exposed wiring insulation or structural components) Office door will set a minimum 6’ maximum 8’ back from the square wall and be centered.
· Rear room length will be the remaining length after the front room dividing wall is placed.
· Flooring and decking if made from wood must have an undercoating to prevent deterioration. Topside flooring or decking must be wearing resistant (normal use) flooring must be rated for E-Track cargo and load management systems.
· Gross Vehicle Weight Rating will not be less than 12,000 and will not exceed 14,001 GVWR.
· Entrance Door to office area on passenger side.
· “Ramp style” Rear Door with standard 12” extension with continuous hinge
· Trailer will have a power package to include a minimum of five (5) 110-volt household style outlets in the office area. Three should be above the desk/below the cabinets.
· Roof Bows and Wall Posts on 24’ centers.
· Floor Crossmembers on 16’centers.
· Minimum wheel size of 16”
· Front office will have a wrap around desk from under window to door.
· Front office will have a Heat and A/C unit to control temperature.
· Binder sized cabinets over window should extend the length of that wall and not proceed into the V nose.
· RV style Awning over passenger side door extending down the length of the trailer. Length of awning should be what’s available commercial and not a custom length and have a mechanical opening.
last modified 3/3/2026 image1.png image2.jpeg
File details come from the government source that posted it. Updated .