SPEC_1_-_02446-Amended.pdf
PDF 126 KB Posted
- Attached to
- Carson NF BAER Closure Gates Federal contract opportunity
- Solicitation number
- 1283A718Q0006
About this file
Specification 1
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPEC_3-_09901.pdf | ||
| Map_3_-_Pio_containment_8x11_land_20180708_2040_SardinasCanyon_NMCAF000457.pdf | ||
| Closure_Gates_ALL_DRAWINGS.pdf | ||
| lat_long_for_closure_gates.xlsx | XLSX spreadsheet | |
| Carson_NF_Closure_Gates_Statement_of_Work.pdf | ||
| SPEC_2_-_05500-amended.pdf | ||
| SPEC_4_-_Site_Work_-_Closure_Gates_02446.pdf | ||
| AGAR_104.pdf | ||
| MAP_1_-_D4_Sardinas_Cyn_Gate_1st_4.pdf | ||
| Map_2_-_D4_Sardinas_Cyn_Gates_2nd_8_Map.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
02446 - 1
DIVISION 2 SITE WORK
CLOSURE GATE 02446
GENERAL
Description
This section specifies furnishing, fabricating, of all gate components. AS SHOWN ON
DRAWINGS. Contractor shall contact the Engineering department with any questions prior to construction of gates and assembly.
Related Work Specified Elsewhere
05500 - Metal Fabrication
09901 - Painting
PRODUCTS
Materials
Materials for gate shall meet the requirements SHOWN ON THE DRAWINGS, and of
Specification 05500, Metal Fabrication. Materials will be approved by the COR based upon submittal of the Shop Drawings for gate fabrication and a Certificate of Compliance for the grades of steel supplied.
Paint
All exposed steel shall be primed with one coat of rust-inhibiting primer and two coats of alkyd enamel, specified under Specification 09901or as approved by COR. Paint color sample will be provided by the COR.
EXECUTION
The closure gates shall be constructed to the dimensions SHOWN ON THE DRAWINGS.
Welding required in assembling gates shall be done in accordance with the AWS practices, and the Fire Protection Plan of this contract.
Metal Fabrication shall conform to the requirements in Specifications 05500.
02446 - 2
Delivery Location
Delivery of gates, locking posts and tie-back posts and all other components will be to the
Santa Fe workcenter warehouse. Contractor shall contact the Engineering Department at
438-5366 to get directions to the workcenter warehouse.
MEASUREMENT AND PAYMENT
Method of Measurement
Measurement will be of each closure gate including steel pipe, steel plates, concrete, paint, and all other materials necessary for completion of installation.
Basis of Payment
Payment will be at the contract unit price for each item designated below and accepted.
Payment will be made under:
PAY ITEM DESCRIPTION PAY UNIT
02446 Closure Gate Each
**** END OF SPECIFICATION 02446 ****
File details come from the government source that posted it.